Condition: good (used), Year of construction: 2001, travel distance X-axis: 12,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, Unisign Uniport 7, Year of construction 2001, Siemens 840 D control system, Travel X/Y/Z 12,000/2,000/1,200 mm, tool changer 180 times, SK 50 holder, Fgjbvi Sjuwn Enodyob spindle speed up to 6,000 rpm, max. table load 2,000 kg/m², 5 side machining with interchangeable angle head, Spindle drive power 37 KW, rapid traverse 36 m/min,

Condition: like new (used), Year of construction: 1987, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Mint CONDITION Technical data: >> Year of manufacture 1987 Machine no. 2102-3536 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Machine lamp >> Coolant device Fobvi Sdsu R D I Soyegb >> Operating instructions, spare parts plan About the machine : Ccbroxg Universal milling machine Deckel FP1 built in 1987 in mint original condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, Functionality: fully functional, machine/vehicle number: 2023AB2200134, travel distance X-axis: 900 mm, travel distance Y-axis: 6,100 mm, travel distance Z-axis: 270 mm, table length: 6,000 mm, table width: 800 mm, power: 11 kW (14.96 HP), PFEIFER technology skyCNC Milling Machine Center 6008 - 5 ATC - Available immediately, ready for use by the user, sold due to conversion CNC milling machine - high precision and powerful 6000 mm x 800 mm x 300 mm (clearance height under portal 300 mm + max. tool length 300 mm) High precision - milling and drilling at extremely high speed and quality. Incl. automatic 5-fold optional 10-fold tool changing system - pneumatic tool change, BT40 tool holder Incl. device for dust extraction on the spindle (integrated in the spindle housing) and connection piece for connection to the local extraction system including HPM minimum quantity lubrication/spray cooling, for cooling workpieces and tools; automatic Can be controlled by a solenoid valve via M code Incl. 5 x tool holder BT40 and 5 x collet chuck including central lubrication access including automatic tool length measurement Incl. mobile MPG control unit for quick and easy control of the machine, workpiece zero points freely selectable, Ethernet connection for data transfer via network, USB connection File formats: G-Code, DIN ISO data Incl. industrial computer system with 17" TFT touchscreen and PC keyboard and mouse HF spindle: 15 HP 11kW, air cooled Spindle speed: 3,000 - 15,000 rpm ES951 A 1112 S Power connection: 3 phases AC 400V / 50 Hz Power consumption: max. 14 kW need 7 bar / compressed air connection including air filter Dimensions (LxWxH): 6850 x 1440 x 2163 mm Weight: approx. 3250 kg Fobvi Ssrh Ix Hsdyjgb

Condition: reconditioned (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 12473, travel distance X-axis: 2,995 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 795 mm, spindle speed (max.): 2,000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 2,995 mm Y-axis travel: 800 mm Z-axis travel: 795 mm Table size: 2,995 × 800 mm Number of T-slots: 5 Coolant tank: 300 L Spindle Tool holder: SK50 Spindle speed: max. 2,000 rpm Feed Max. feed rate: 5,000 mm/min Max. rapid traverse: 6,000 mm/min MACHINE DETAILS Fgjbvi Sdsv R Dxmsyjb Installation dimensions: 8,000 × 3,500 × 3,000 mm EQUIPMENT - CNC control retrofitted by NCT - Horizontal and vertical machining possible

Condition: good (used), Year of construction: 1996, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, A Kunzmann milling machine of the type WF 4/3 is for sale The machine is fully functional and ready for immediate use Technical data Control: Heidenhain TNC 124 Year of manufacture: 1996 Fgsbvsvftrxji Sdyjb Working range longitudinal X - axis: 400 mm transverse Y - axis: 350 mm vertical Z - axis: 400 mm Angled table, rigid Clamping surface: 650 x 350 mm Max. load: 250 kg Main drive AC motor: 5.5 kW Feed drives AC - single drives Feed infinitely variable 0 - 2 000 mm/min Tool holder: SK 40 Speed range: 1-4000 1/min Quill, vertical: stroke 60 mm Swivel range vertical milling head: ± 90° Tool clamping: hydraulic Linear stroke measuring systems, direct, distance-coded Resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441 0.015 mm 0.015 mm Operating voltage 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg On request, transportation and loading can be arranged at extra cost. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2016, BG Cam 1325 ATC, Year of manufacture 2016, Siemens 808 D control system, Travel X/Y/Z 1270/2540/150 mm, High pressure vacuum table, Table with 4 zones, Yaskawa servo motor drive, rapid traverse X/Y 35 m/min, rapid traverse Z 15 m/min, Resolution 0.001 mm, repeat accuracy 0.01 mm, Spindle speed up to 24,000 rpm, new spindle 2024, ER 25, 6-station tool changer, linear guides, tool length measurement, Fobvi Ssuhzyqjdyogb vacuum pump, suction foot,

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Light gray Super CONDITION Fgsbvi Sju Rn Tljdyeb Technical data: >> Year of construction approx. 1990 Machine no. 2102-5231 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan To the machine : We offer universal milling machine Deckel FP1 in very good condition in light gray. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: good (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 662172, feed length X-axis: 600 mm, feed length Y-axis: 450 mm, feed length Z-axis: 450 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 30, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Control type: CNC 532 Feed range / rapid traverse Feed in X, Y, and Z axes: 1 - 6,000 mm/min Rapid traverse in X and Z axes: 6 m/min Rapid traverse in Y axis: 6 m/min 2-axis NC table Clamping surface: Ø 320 mm Center bore: Ø 30 H7 mm Number/spacing of T-slots: 5/63-14 H7 mm Rapid traverse for swiveling/rotating: 16/40 rpm Swivel range: ± 105° Rotation range: n x 360° Max. table load: 100 kg Main Drive Three-phase motor power: 10.0 kW Switching speeds: 2 Fgebvi Sjv Ryamjdysb Work spindles & tools Tool holder: SK 40 Number of tools: 30 (universal) Speed range: continuously variable from 20 - 6,300 rpm Vertical quill stroke: 80 mm MACHINE DETAILS Machine weight: approx. 3,600 kg Machine start-up time: 1193:27:30 Spindle time: 193:02:52 EQUIPMENT - Universal tool changer - Direct position measuring system - Automatic vertical milling head activation - Internal coolant supply & cooling unit - Chip conveyor - Tool breakage detection - Infrared measuring probe

Condition: good (used), Functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, For sale is a conventional milling machine of the brand Deckel and type FP1 The small size of the machine makes it ideal for fast work with a small footprint Fobeugv Hvsvi Sdysgb The machine is fully functional Technical data: x-path 300 mm y-path 160 mm z-path 340 mm Tool holder SK40 Speed 40-2000 rpm Conventional control Table size: 600 x 210 mm Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. 1200x1100x1600 mm Loading and shipping throughout Europe can be organized on request. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Super CONDITION Technical data: >> Year of construction 1984 Machine no. 2102-2601 >> Turn-tilt-swivel table >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Fgsbvi Sdou Racrsyeb Dpbyzb >> 3-axis digital display Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1984 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: repair required (used), Year of construction: 1989, Functionality: limited functionality, !!! SPECIAL OFFER!!! For sale are 2 active milling machines of the brand Hermle and the type UWF 801 Price for both machines in a package One machine has an error when moving in Y, the 2nd machine is missing relays. The idea would be to make one machine out of 2. The value of a functional machine would be approx. 10,000 € What makes the machine special is its active control, which allows it to set feeds that stop at a predetermined level. The machine is easy to operate and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Vertical quill stroke: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed rate:: X+Y: 4 - 1600 steples mm/min Feed rate:: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 iand Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Fgebvist Ifm Ne Sdyob Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Functionality: fully functional, Universal milling machine Deckel FP1 with 3 - axis digital readout Heidenhain original condition !!! Technical data: >> Machine no. 56560/08 Year of construction approx. 1975 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1,5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 Febvju Nvxmji Sdyogb >> S20x2 tightening system >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant device About the machine : We offer a universal milling machine Deckel FP1 in very good original condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more precise. Take the opportunity to inspect and try out the lids on site under power.

Condition: good (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 450 mm, table length: 850 mm, table width: 700 mm, total height: 2,700 mm, total length: 3,200 mm, total width: 2,500 mm, rotational speed (max.): 42,000 rpm, overall weight: 7,700 kg, For sale is a machining center of the brand Ingersoll and the type OPS 650 The machine is fully operational and in good condition. Particularly noteworthy is the high-speed cuttting spindle with 42,000 rpm and the 72 tool positions New spindle 2019, new X & Y-axis 2023 Technical data: Year of construction: 2005 Control system: Andronic X travel: 700 mm Travel Y: 550 mm Z travel: 450 mm A-axis: 120 ° C-axis: 360 ° Clamping surface: 850*700 mm Load capacity: max. 2,000 kg Path control: Fully adapted to 3D Traversing speed: max 30 m/min Tool magazine: 72 places Dimensions L W H: 2,500x3,200x2,700 mm Weight: 7,700 kg Fgebvi Sot Eugmjdyjb On request, loading and transport (Europe-wide) can be organized for an extra charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock Fgebveu Nvwvsi Sdyob >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Year of construction: 1968, Condition: good (used), For sale is a milling machine Deckel brand from 1968 The machine is in a good to very good condition and fully functional (No digital display but can be mounted additionally on request) Fobjihf Etjvi Sdyogb Technical data: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm speed range: 40 - 2000 rpm spindle travel vertical: 60 mm spindle travel horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 330 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Technical data: >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle Fgsbvi Sju I Rm Njdyob >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately.

Condition: good (used), Functionality: fully functional, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530 !!! Technical data: >> Year of construction approx. 1975 Machine no. 0681 >> Turn-tilt-tilting table ( new reworked ) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes Fgebvi Sdou I Rl Ssyeb >> Drive power .:3 KW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Tightening system M16 >> Weight approx. 1300 kg Accessories and equipment: >> 3-axis digital display RSF Elektronik Z-530 >> Coolant system >> Central lubrication To the machine : We offer a universal milling machine Deckel FP3 in good condition, all spindles can be moved easily. The bellows are almost all new. The rotary-tilt-dispensing table is as good as new. An oil change has been carried out. Mechanically and electrically tested. The digital display makes work easier and even more precise. Take the opportunity to inspect and try out the lids on site under power.

Condition: like new (used), Functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Fgobvieu Dm E Hj Sdysb Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Universal milling machine DMG FP4M Special Edition With 3-axis digital readout ND7013 from Heidenhain Mint condition Made in Germany CE conform !!! Technical data: >> Year of construction 2020 >> Rigid angular table clamping surface 480x800mm >> Spindle drive speed range 25-3000 min-1 stepless with input at counter >> Regulated main drive 6 KW >> Vertical milling head swivels +- 90 degrees (180 degrees) >> Linear axes feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 KG Accessories and equipment: Fgebviouxn Npj Sdyeb >> Heidenhain digital readout ND 7013 >> Coolant device >> Minimum quantity lubrication >> Central lubrication >> Machine feet >> Operating instructions, etc. To the machine : We offer a universal milling machine DMG FP4M Special Edition with 3-axis digital readout from Heidenhain ND 7013 in mint condition. A reliable and user-friendly machine made in Germany. An oil change has been carried out. Mechanically and electrically tested. Take the opportunity to inspect and try out the Deckel machine on site under power.

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, Tool milling machine Kunzmann WF 600M with Heidenhain TNC 124 control NEW Mint condition CE-compliant !!! Technical data: >> Year of construction 2013 Machine-No.610261 >> Milling table clamping surface 800 x 425 mm Clamping grooves 6 Slot width 14 H 7 Slot spacing 63 mm Maximum load 300 kg >> Speeds S I 1 - 1125 min-1 Speeds S II 1126 - 4500 min-1 >> Feed rate (potentiometer 100 %) 0 - 2000 mm/min. Rapid traverse X and Y 5000 mm/min. Rapid traverse Z 4000 mm/min. >> Traverse paths X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 Fjbjurv T Iovi Sdyogb >> Hydraulic tightening system >> Weight approx. 2000 kg >> Approx. dimensions: 2 x 2 x 2 m >> Main drive motor: 5.5 kW Accessories and equipment: >> Heidenhain TNC 124 control >> Heidenhain HR410 electronic handwheel >> Vertical and horizontal hydraulic clamping >> Chip flushing gun >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions >> Coolant system About the machine : We are offering a Kunzmann WF 600M tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in mint condition. It comes from a large company where it was only used a little for training. A very easy to operate control. The machine also has vertical and horizontal hydraulic clamping. It is very easy to convert from vertical to horizontal by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Kunzmann on site under power. Two identical machines are available.

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, Universal milling machine Macmon M200 with 3-axis digital readout from AXESTA in mint condition CE compliant !!! Technical data: >> Year of construction 1998 Machine-No.357 >> 3 axes digital display AXESTA >> Rigid angle table >> Speed: 37 - 1900 rpm >> Feed in 3 axes from 7-380 mm/min >> Rapid traverse in all 3 axes >> Travel X/Y/Z: 600/230/390 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Tightening system S20x2 >> Weight approx. 1600 kg Accessories and equipment: Fgjbsr Hbc Ujvi Sdysb >> 3-axis digital display AXESTA >> Coolant device >> Counter holder >> Chip tray >> Operating instructions To the machine : We are offering a Macmon M200B universal milling machine in mint condition. The Macmon has original paint and runs smoothly even at high speeds. The machine has little crank play and all spindles can be moved easily. The M200 comes from a training workshop where it was used very little. Mechanically and electrically tested. The digital display from AXESTA makes work easier and even more accurate. Take the opportunity to inspect and try out the machine on site under power.

Condition: like new (used), Year of construction: 1998, Universal milling machine Macmon M200 with 3 - axis digital display from AXESTA in mint condition CE Conform !!! Technical data: >> Year of manufacture 1998 Machine-No.355 >> 3 axes digital display AXESTA Fsbskzg Tbovi Sdyegb >> Rigid angular table >> Speed: 37 - 1900 rpm >> Feed in 3 axes from 7-380 mm/min >> Rapid traverse in all 3 axes >> Travels X/Y/Z: 600/230/390 mm >> Equipment: vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Pulling system S20x2 >> Weight approx. 1600 Kg Accessories and equipment: >> 3 axes digital display AXESTA >> Coolant device >> counterholder >> chip tray >> operating instructions To the machine : Offered is a universal milling machine Macmon M200B in mint condition. The Macmon has original paint and runs smoothly even at high speeds. The machine has little crank play and all spindles move easily. The M200 comes from a training workshop where it was used very little. Mechanically and electrically tested. The AXESTA digital display makes working easier and even more accurate. Take the opportunity to inspect and try the machine on site under power.

Condition: excellent (used), Year of construction: 1979, Functionality: fully functional, Universal milling machine Deckel FP2 with 3-axis active TNC 113 digital display Heidenhain and infinitely variable feed in TOP condition Technical data: >> Year of construction 1979 Machine no. 2202-10777 >> Rigid angle table (newly planed) >> Speed: 25 - 2500 rpm >> Feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:2,2 KW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be moved 150 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system S20x2 >> Weight approx. 1400 kg Accessories and equipment: >> 3 axes TNC 113 active digital display Heidenhain >> Coolant device >> Central lubrication To the machine : Fobvouc Ubwoi Sdyjgb We are offering a Deckel FP2 universal milling machine in very good condition. The FP2 comes from a laboratory of a state-owned company where it was used very little. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. On this newer FP2 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine on site under power.

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2867 >> Turn-tilt-swivel table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW Fgobvi Sot Aarpsdyob >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1985 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1978, Functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display K&C infinitely variable feed in light gray Super condition Technical data: >> Year of construction 1978 Machine no. 2101-0465 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed stepless 2 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital indicator K&C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device To the machine : Febvi Set Aav Iodyegb We are offering a Deckel FP1 universal milling machine in very good condition. The machine has very little crank play and all spindles can be moved easily. The bellows are all new. On this newer FP1 model, the feed is infinitely variable in two axes and the machine also has a rapid traverse. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power.