Condition: used, Year of construction: 2006, x-travel 3.500 mm Iodsx Hp Dropfx Ah Ujbf y-travel 2.600 mm z-travel 1.000 mm Control HEIDENHAIN iTNC-530 table-size 4.500 x 1.500 mm distance between columns 2.300 mm rapid motion - x-axis 15.000 mm/min rapid traverse Y,Z 12.000 m/min feed 5.000 m/min tool taper ISO 50 number of spindle speeds 5.000 U/min/rpm milling head -swivable UAGA 3.000 U/min 45 Grad spindle drive 22 kW transmission ratio 2 table weight 15.000 Kg Tools changer 30 fach/tools handwheel HEIDENHAIN HR 410 air pressure 6 bar total power requirement 44 kW weight of the machine ca. 25 t - Auto Indexing Head 2, 5º /2.5º - Automatic Support in the right side for Head UAGA - Direct Output Head. - Automatic Head Changer - Automatic tools changer

Year of construction: 1986, condition: used, tool adaptor KOMET PKB 200-20-112 Isdsunuzcspfx Ah Ujbf weight of the machine ca. 700 kg dimensions of the machine ca. 1,6 * 0,7 * 1 m

Year of construction: 1986, condition: good (used), Speed range: 31.5 - 3150/min. Control: Heidenhain TNC 155 Traverse: X axis 630 mm Y-axis 500 mm Ibjdpfx Ahjfhmd Ue Usf Z axis 460 mm Feed speed: 1 - 3000 mm/min. in rapid traverse X - Y: 6000 mm/min in rapid traverse Z: 4000 mm/min.

Condition: used, Technical specifications: X-axis travel: 700 mm Spindle speed: up to 1500 rpm Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Swiveling head: yes Ibodpfx Ahjxtnn Te Uef Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z: 500mm/280mm/330mm, table dimensions X/Y: 710mm/400mm, max. table load: 150kg, speed: 1800rpm, tool holder: SK40, feed rate: 1250mm/min, milling head swivel: +/-90°. Machine dimensions X/Y/Z: approx. 1800mm/2200mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible. Isdpfx Aox Ih Dtjh Uobf

Condition: used, Year of construction: 2003, x-travel 350 mm y-travel 240 mm z-travel 340 mm b-axis -15 / +105 ° c-axis 360 ° control SINUMERIK 810 D SIEMENS spindle taper SK 40 spindle turning speed range 20 - 6.300 U/min table-size Ø 400 x 290 mm Isdpfx Ahjx A H R Ss Uobf table load 100 kg feeds -stepless- 5.000 mm/min rapid traverse 5,0 m/min power capacity 6,3 / 10,0 kVA voltage 400 V total power requirement 15,0 kVA weight of the machine ca. 1,6 t dimensions of the machine ca. 1,75 x 1,60 x 2,10 m coolant tank 1,10 x 0,30 x 0,40 m - Serial-No.: 11065356904 - Machine ON: 37,474 h - Spindle ON: 1,428 h - Control: Sinumerik 810 D / Shopmill - Electronic handwheel - machine table pivotable - Manual rotation/pivotation of machine table with DRO display on CNC screen - Swivel range b-axis -15° / +105° - Swivel range c-axis 360° - Coolant device - Siemens CCU-Unit changed Dec.2025

Condition: new, The Servomill® FPK 500 is a state-of-the-art Conventional Vertical Milling Machine from KNUTH, designed for superior performance in toolmaking and mechanical manufacturing. This versatile tool seamlessly integrates modern electronics, making it intuitive and capable of operating with exceptional precision. Its robust construction features a console design made of high-quality grey cast iron, ensuring durability and dimensional stability during operation. Noteworthy attributes include powerful servo feed technology with electronic handwheels, enabling infinite variability in feed speeds and precise control across all axes, accompanied by ball screws that eliminate backlash for enhanced accuracy. With a comprehensive variety of standard equipment such as a coolant system, LED worklight, and an automatic lubrication system, the Servomill addresses operational efficiency while minimizing maintenance needs. Perfect for both skilled operators and training environments, this machine exemplifies the best in modern milling technology. Whether you're looking to enhance your production capabilities or train the next generation of machinists, the Servomill® FPK 500 is an ideal choice. Request a quote today to elevate your milling operations with this advanced Conventional Vertical Milling Machine. Iedpfx Ahswa Ah Rj Uobf

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 320 mm, spindle mount: MK 1, type of input current: AC, rotational speed (max.): 1,600 rpm, rotational speed (min.): 130 rpm, overall weight: 50 kg, spindle motor power: 250 W, year of last overhaul: 2023, Equipment: documentation/manual, rotational speed infinitely variable, HOBBYMAT BFE 65 PRECISION MILLING MACHINE WITH EXTENSIVE ACCESSORIES For sale: Professional Hobbymat BFE 65 milling machine in perfect condition, including comprehensive accessory package. This East German precision machine (circa 1985-1992) has been lightly used for hobby work and never deployed industrially. SPECIFICATIONS: Isdpfxox Ak Rij Ah Ujbf • 4-speed gearhead: 315, 560, 900, 1600 rpm • Motor: 0.25-0.29 kW with KIMO digital frequency inverter • Table travel: 160 x 450 mm (X-Y axes) • MT1 spindle taper • Digital readout (DRO) system on table • Complete documentation included COMPREHENSIVE ACCESSORY PACKAGE INCLUDED: ✓ Precision rotary/dividing table with 4-jaw independent chuck ✓ Complete T-slot clamping kit in red case (clamps, step blocks, studs, nuts) ✓ Precision milling vise ✓ Multiple HSS drill bit sets in wooden storage blocks ✓ End mill set in wooden storage ✓ Countersinks, center drills, reamers ✓ Tool holders and MT1 arbors ✓ Complete manuals (German) CONDITION: Great condition, well maintained, all functions operate excellently. Machine is fully operational and is currently connected and ready for a demo in Apeldoorn The Netherlands. It will be moved to conditioned storage in Zoetermeer The Netherlands before Christmas. PRICE: € 3,000 (complete package, not separable) Collection: Currently Apeldoorn NL, soon Zoetermeer NL A complete, professional milling setup in close to perfect condition. The comprehensive accessory package alone is worth €800-1200. This East German precision machine with digital control and DRO system provides you with all necessary tools and work holding for professional work immediately. Interested? Contact me for viewing!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x750x1150 mm Ibsdpfx Ahjvz Hkye Ujf Weight 50 kg Total power requirement 1,05 kw

Year of construction: 1992, condition: used, Empty weight: 3.800 kg Dimensions (LxBxH): 210 x 260 x 260 cm Price: On request Iedsxb Rwgepfx Ah Ujbf - Year: 1992 - Documentation available: No - CE certificate present: No - Serial number: 610555 - Drive system: CNC - Control system brand: Fanuc - Power [kW]: 7.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 610 - Y-axis travel [mm]: 460 - Z-axis travel [mm]: 510 - Table length [mm]: 950 - Table width [mm]: 560 - Tool holder: BT40 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 6000 - Transport dimensions: 2100mm x 2600mm x 2600mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 90 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, Equipment: documentation/manual, Dear Sir or Madam, We are pleased to offer you a partially refurbished milling machine, type Deckel FP4M (K) aktiv. Thanks to its extensive features, this model stands out as a true highlight among conventional machine tools. The Deckel FP4MK has been thoroughly partially overhauled in our workshop, so it is in absolute top condition, both technically and visually, and is almost indistinguishable from a new machine in terms of geometry. We look forward to your inquiry! Delivery time: on request Spindle speed: 50 - 2,500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1,300 mm/min Drive power: 3.7 kW / 4.4 kW Travel paths X/Y/Z: 500/400/400 mm Tool holder: SK40 Clamping system: hydraulic Ijdpfxex Irwdj Ah Uebf Vertical quill stroke: 90 mm Weight: approx. 1,600 kg Table version: Fixed angle table or rotary-swivel-tilt table Additional features and accessories include: 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant system, machine levelling feet, technical documentation, and much more on request. Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can carry out a partial or complete overhaul of the selected machine - You are free to choose the paint colour of your machine - You can optionally order additional accessories such as tooling, etc. directly - On request, we can install further accessories such as safety equipment, etc. - We are happy to take care of shipping and/or machine installation

Condition: good (used), Year of construction: 1998, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 107.40.98.165, Year 1998 Heidenhain TNC 430 710x500x500 mm - 42000 RPM Netweight 5670 kg Dimensions 2794x2997x3035* mm Iedpfscl Rurjx Ah Usbf TECHNICAL DATA Table Dimensions 1220 x 457 mm Admitted load 1575 kg T-grooves 14 mm Number of T-grooves 5 Travels Longitudinal X 1016 mm Transverse Y 508 mm Vertical Z 635 mm Workspindle Power of AC-motor, 2-stepped gears 11kW Speed range, continuous 10-7500 min-1 Spindle speed (option) 10'000 rpm Taper ISO40 Feeds drive Feed programmable axes X, Y & Z 0 – 7620 mm/min Rapid feed axes X, Y, Z 18,0 m/min Automatisation Tool changer 20 pos Tool changing time (for nearby posts) 5,0 sec. errors and omissions excepted-data given without obligation Inventory Nr.4112006, machine equipped with  : NC Heidenhain TNC430M Milling spindle 42’000 min-1, HSK 40 E 36 tool positions Electronical handwheel Tool measuring Renishaw TS27 Ethernet card Minimal quantities greasing Unilube Aspiration Lumestat Protection cabin Rotary table Air passage through rotary table Vacuum clamping (by external provider) Spray gun Chips conveyor

Condition: new, The FPK 4.3 is a powerful toolroom milling machine that belongs to the category of Conventional Vertical Milling Machines. This versatile tool-milling machine, renowned in tool and mold making, offers a compact design that combines flexibility with ease of use. The premium cast-iron machine column ensures maximum dynamic rigidity and constant precision, complemented by precision preloaded ball screws on all axes for enhanced performance. Operators will appreciate the ergonomically arranged controls and the swivelling control panel that, alongside the standard digital position indicator, provide maximum comfort. With a large work table measuring 400x800 mm and a travel capacity of 500 mm on the X-axis, the FPK 4.3 is perfect for diverse applications in both training and manufacturing environments. Additionally, it features an automatic feed on all axes with infinitely variable speed settings, and a rigid outer arbor for horizontal milling, making it robust yet precise. Explore the extensive accessory package and take advantage of KNUTH’s reputation for quality – order online today and elevate your workshop with this exceptional milling machine. Ibsdpsuyh Disfx Ah Uef

Condition: used, Year of construction: 1995, operating hours: 24,142 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, feed rate X-axis: 3,000 m/min, feed rate Y-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, type of input current: three-phase, workpiece weight (max.): 1,500 kg, spindle motor power: 7,500 W, controller manufacturer: Heidenhain, controller model: TNC 360, For sale is a Lagun CNC milling machine, year of manufacture 1995, with 24,150 operating hours. Ibedpoxmhaisfx Ah Usf Technical data: - Control: Heidenhain TNC360 - X-axis: 1100 mm - Y-axis: 600 mm - Z-axis: 600 mm - Table size: 1200 mm x 550 mm - Spindle taper: ISO50 BT40 - Speed range: 50–3000 rpm - Rapid traverse: 10,000 mm/min The machine is equipped with a manual universal milling head and an enclosure. The machine is in running condition and can be inspected under power.

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. Ijdpfx Aoh U Nvkjh Ujbf MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: good (used), functionality: fully functional, Universal Milling Machine Dufour 194 Made in France 🇫🇷 Ibsdpfxjxzlb Te Ah Uof In excellent condition Table dimensions: 1200 x 250 [mm] Travel: X: 825 mm Y: 290 mm Z: 410 mm Spindle taper: SA 40 Spindle speeds: 34-2000 Weight: 2 tons

Condition: used, diameter div. number 44x Iedpfx Ahjxyzx Es Uebf tool adaptor SK 40

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Iodpfx Ahjw Uc Npe Ujbf Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: new, The FPK 6.3 is a highly versatile Conventional Vertical Milling Machine, ideal for Toolroom Milling Machines, and an essential addition to any mechanical production environment focused on tool and mold making. This compact yet robust machine features a premium cast-iron column for maximum dynamic rigidity and constant precision. Operators will appreciate the ergonomically arranged controls, swivelling control panel, and digital position indicator, which enhance usability. With precise preloaded ball screws on all axes, an automatic feed system with rapid feed, and an infinitely variable main spindle drive, it ensures efficient operation and precision. The large work table and generous travel dimensions further support its versatile applications. Included with the FPK 6.3 is an extensive accessory package alongside standard equipment such as electronic hand-wheels and a central lubrication system. Experience the robust performance of KNUTH's FPK 6.3 and consider ordering online to elevate your milling capabilities today. Iedoqhkm Sepfx Ah Uebf

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ibodpfx Aher Hr Are Uof Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: used, diameter div. number 44x Iodexyzxxepfx Ah Ujbf tool adaptor SK 40

Condition: new, The UWF 5 is a state-of-the-art universal milling machine that falls under the category of Conventional Vertical Milling Machines and is part of the Universal Milling Machines product group. This top model in the UWF series boasts a large work area of 1325 x 360 mm and supports a table load capacity of up to 500 kg, making it ideal for both repair shops and production departments. Constructed with a robust machine bed from high-strength HT-200 cast iron and precision-ground guideways, it ensures long-term accuracy and wear resistance. The universal cutter head can swivel on two planes, allowing for quick changes between horizontal and vertical machining, while the powerful servo axis motor enables finely stepped motorized feeds in all axes. Additionally, the 5.5 kW main drive guarantees high torque, significantly enhancing productivity and offering features like a 3-axis position indicator and a user-friendly control panel. With extensive standard equipment, including a coolant system and tool storage, the UWF 5 is built for ease of use and maintenance-free operation. For those interested in enhancing their machining capabilities, request a quote for this impressive milling machine today. Ijdpfep Aucwox Ah Usbf

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Iodpsuv Hrdefx Ah Ujbf Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: new, The VECTOR 1400 M SI is a robust Vertical Machining Center from KNUTH, specifically designed for the efficient machining of large and heavy workpieces. This C-Frame Vertical CNC Center features a high-quality Meehanite casting base that offers exceptional stability and high precision, even in multi-shift operations. Key attributes include a travel capacity of 1,400 mm in the X-axis and 720 mm in the Y-axis, ensuring flexibility for diverse applications. With a state-of-the-art spindle supported by multiple bearings, the VECTOR minimizes vibrations and ensures optimal machining quality thanks to its 30-bar coolant system. The machine is loaded with standard equipment such as a Siemens 828D control, a 24-station tool changer, and an automatic central lubrication system, all designed to enhance productivity. Whether you’re considering automation options or specific customizations, the VECTOR series allows tailored solutions to meet your machining needs. For exceptional performance in the realm of Vertical Machining Centers, request a quote today and discover the capabilities of the VECTOR 1400 M SI. Ibedpfx Ahsww T Tro Ujf

Condition: new, The LabCenter 260 CNC is a robust and compact Vertical Machining Center designed specifically for CNC training and the production of small workpieces. This innovative machine offers the full functionality of larger production machines while being mobile and professional, making it ideal for laboratories and training environments. Equipped with the SIEMENS 808D Advance control, the LabCenter facilitates an intuitive introduction to CNC applications. It boasts a continuously variable main spindle speed of up to 5000 revolutions per minute and features precisely machined cast iron frames, durable dovetail guides, and preloaded ball screws with servo drives on all axes. With a maximum travel of 160 mm on the X-axis and a table size of 400x145 mm, this C-Frame Vertical CNC Center enhances productivity with its efficient 4-station tool changer and mobile base, which allows for convenient tool and material storage. Ensure seamless operation with the included electronic hand-wheel, central lubrication, and comprehensive operating manual. KNUTH guarantees quality and precision in all aspects. To experience the benefits of this Vertical Machining Center, order online today. Ibsdouy Ihhspfx Ah Uef