Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: B (FP 2) reconditioned with CE geometric acceptance with test report with guarantee Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - coolant system - operating instructions Fohx Dqjdvdczowmjgb CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons - new documentation for machine and control cabinet - CE declaration of conformity

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, machine/vehicle number: 56366, Universal milling machine ACIERA F 3 with tooling in very good condition. Machine comes from a training centre. Technische Daten: * Machine-Nr. 56366 * Spindelspeeds: 100 – 2000 rpm * Angle table * Powerfeed X Achse * Spindle brake * Travel X/Y/Z: 300/300/135 mm * Spindelnose W20 * Weight ca. 500 Kg Fgjhxowgx D Uo Dqwmjb Accessories and tooling: * Collets W20 1 / 20mm 1 mm up. * 3 pc cutter holders * 1 drill chuck * machine clamp * Complete set machinebooks Offered universal milling machine Aciera F3 is complete with many tooling and in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. The machine is mechanical and electrical complete tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: as good as new (ex-display), Year of construction: 2024, Technical specifications: Working dimensions on the X-Y axis: 2080 x 2800 mm ▪ Working area on the Z axis: 250 mm ▪ Working height on the Z axis: 200 mm ▪ Working speed X-Y: 30 m/min ▪ Tool changer with 10 tool positions ▪ Max. working speed X-Y: 20 m/min ▪ Working speed Z: 15 m/min ▪ Material fixation method: with vacuum ▪ Working areas on the vacuum table: 8 areas x 30 holes each ▪ Vacuum pump capacity 2 x 200 mc/h ▪ Drive motor type: Delta servo motors x 4 ▪ Positioning accuracy +-0.05/300 mm ▪ Motor power: 9 kW ▪ Air-cooled spindle with ceramic bearings ▪ Spindle speeds: 0-24,000rpm ▪ Spindle taper ISO30 ▪ Type of tool holder: ER32 ▪ Voltage: 400V ▪ Weight: approx. 3000kg Fgshx Djiim Ddeqwmsb

Condition: ready for operation (used), Table clamping area: 1100 x 255 mm Table movement x: 700 mm Table movement y: 250 mm Table movement z: 430 mm Fehxov Dh Irs Dqwmsgb Spindle speeds: 38 - 1500 rpm Feeds longitudinal and transverse: 12 - 1000 mm/min Feeds vertical: 1.75 m/min Electrical connection: 380 V, approx. 4 kW kW Space required: 1700 x 1600 x 1650 mm Weight: 1650 kg

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 S Fjhxsv Rxa Ss Dqwmogb Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill diameter 100 mm, extendable vertical: 75 mm M & H 3D Buttons Individual feed motors for each axis – three-phase (brushless) Feed range in X, Y, and Z manual/programmable: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Probe system Counterholder with counter bearing Chip conveyor with chip trolley Coolant tank: 150 liters Weight approx.: 4,800 kg Machine dimensions LxWxH approx.: 2,950 x 1,840 x 2,150 mm 080525ä

Condition: ready for operation (used), Year of construction: 2001, Control Unit Fjhx Djwg Ig Ssqwmsgb Brand SIEMENS Model Sinumerik 840 D Main Drive Spindle speed range 6000 rpm Spindle motor power 37 KW Tool taper SK 50 Movement X-Axis Movement 12000 Y-Axis Movement 2000 Z-Axis Movement 1200 Additional Equipment Number of Tools: 180 5 Side Machining with Interchangeable Angle Head This 3-axis Unisign UNIPORT 7 was manufactured in 2001. A gantry milling machine, it offers robust construction and precision for diverse machining needs. Ideal for those seeking reliable performance in a used machine. Contact us for more information. Application Types Milling

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: A (FP 1) reconditioned with CE geometric acceptance with test report with guarantee Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - coolant system Fgehxedvdc Ie Dqwmob - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons - new documentation for machine and control cabinet - CE declaration of conformity

Condition: excellent (used), Year of construction: 1982, Functionality: fully functional, machine/vehicle number: 56283, Universal milling machine ACIERA F 3 with tooling in very good condition. Machine comes from a training centre. Technische Daten: * Machine-Nr. 56283 Fjhx Dqewgxxxjwmjgb * Spindelspeeds: 100 – 2000 rpm * turn tilt tilt table * Powerfeed X Achse * Spindle brake * Travel X/Y/Z: 300/300/135 mm * Spindelnose W20 * Weight ca. 500 Kg Accessories and tooling: * Collets W20 1 / 20mm 1 mm up. * 3 pc cutter holders * 1 drill chuck * machine clamp * Pulrod for horizontal milling * Complete set machinebooks Offered universal milling machine Aciera F3 is complete with many tooling and in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. The machine is mechanical and electrical complete tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: excellent (used), Walter cutterhead, type: F3042B080Z0515 Fgjhx Dqsqgc Thewmeb

Year of construction: 1960, Condition: used, Empty weight: 5.500 kg Dimensions (LxBxH): 245 x 265 x 270 cm - Year: 1960 - Documentation available: No - Serial number: 33460 - Control: Conventional - Motor power: 15.0kW - Transport dimensions: 2450mm x 2650mm x 2700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fgshx Dqswczr Hjwmob Bram van Summeren

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: Fgjhx Dqjv Rpr Sswmsb If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 080525

Condition: used, Year of construction: 2000, x-travel 3.700 mm y-travel 3.050 mm Fgohx Dowg Hrgoqwmeb z-travel 1.000 mm Control HEIDENHAIN TNC-430 PA distance between columns 2.300 mm 1.175 mm rapid travel x/y/z 25.000 mm/min feeds 15.000 mm/min tool taper ISO-50 - DIN 69871 table weight 20.000 Kg spindle drive 37 kW milling head -swivable +/- 45 ° milling head AB Achse 360.000 pos. Tools changer 30 fach/tools Chip coveyor Ink. Internal cooling system 20 bar table-size 4.000 x 1.800 mm weight of the machine ca. 42 t

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Fjhx Dqwjd Tytyomogb Model: FP 2 Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. No.: 6976 with guarantee geometric acceptance with test report Accessories: - 3-A digital display FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Condition: excellent (used), quill stroke: 80 mm, Milling machine Make Korradi Type UW 003 Spindle Spindle SK 40 Table size 800 x 350 mm X path 600 mm Y path 400 mm Z path 400 mm 12 spindle speeds from 30 - 1800 na/min. Digital readout lengthwise and crosswise Fgshx Dqoqfc R Ejwmjb 18 feed steps from 6 - 270 mm/min. Vertical swivel head Quill stroke 80 mm Transport dimension : Width 1400 mm Length 1500 mm Height 1900 mm Weight 1960 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 21,723 h, machine/vehicle number: 13909-65, USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE X-AXIS TRAVEL: 540 mm Y-AXIS TRAVEL: 635 mm Z-AXIS TRAVEL: 400 mm DISTANCE SPINDLE NOSE-TABLE: 50-555 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 42000 rpm; 14 kW; HSK E40 A-AXIS: ± 115 ° TABLE SIZE: 340 x 340 mm Fehsrmm Sfox Dqwmogb MAX ADMITTED LOAD: 200 Kg MAX TOOL DIAMETER: 16 mm WEIGHT: 10000 Kg OVERALL DIMENSIONS: 2885 x 2760 x 3050 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; SPINDLE COOLING SYSTEM ; NOTE: AXES WITH LINEAR MOTOR

Year of construction: 2001, Condition: used, Empty weight: 5.500 kg Dimensions (LxBxH): 430 x 240 x 270 cm Price: On request - Year: 2001 - Documentation available: Yes - CE mark available: Yes - Serial number: 24350 - Control: CNC - Motor power: 8.0kW - Transport dimensions: 4300mm x 2400mm x 2700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren Fgohx Dewcxdasqwmob

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Fehx Dqsrywgzswmsgb Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: used, Year of construction: 2001, x-travel 2708 mm y-travel 1250 mm z-travel 1513 mm table-size 3000 x 1000 mm taper ISO ISO 50 turning speeds 35-6000 U/min working speed 20000 mm/min rapid traverse 25000 mm/min Fohx Dov Nbmfsqwmogb table load 10 t weight of the machine ca. 28 t

Condition: reconditioned (used), Year of construction: 1986, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1986 - partially overhauled, newly painted, RAL7035 light gray / RAL7042 traffic gray A RAL5008 gray blue Mach. No.: 2102-3014 Milling head type: 2171 Milling head number: 2955 Guarantee: 6 months single shift from delivery, on the mechanics partially overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 Fjhxor En D Io Dqwmogb with active function in X, Y and Z axes - Universal table 590 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine is technically compliant with the state of the year it was built.

Condition: ready for operation (used), Year of construction: 1978, machine/vehicle number: 32392, table mounting size: 560 x 240 mm x-axis: 300 mm y-axis: 275 mm Fgshx Dqwjd Tfcismsb z-axis: 200 mm spindle retainer: ISO 40 spindle rotations: 40 - 2000 rpm operating voltage: 380 V total energy requirement: 1,5 kW space needed: 1200 x 1100 x 1700 mm weight: ca. 750 kg

Condition: excellent (used), Year of construction: 1986, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 290 mm, Year of manufacture: 1986 Travel paths: X = 300 mm Y = 160 mm Z = 290 mm Fgohewgafyox Dqwmob Equipment: Standard accessories Vertical milling head, SK 40/20x2 Fixed angle table 210 x 600 mm, NEW! Retrofitted safety device for milling spindle, electrically protected, NEW! Active digital display (TNC113), 3 axes Coolant system Machine light Machine feet Documentation Condition: Good, mechanics and control system workshop-tested

Year of construction: 2017, Condition: used, Empty weight: 3.600 kg Dimensions (LxBxH): 255 x 250 x 250 cm Price: On request - Year: 2017 - Documentation available: Yes - Serial number: 1139797 - Control: CNC - Motor power: 14.0kW - Transport dimensions: 2550mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fohxjwcp Txe Dqwmogb Bram van Summeren

Condition: good (used), 1 used universal tool milling machine Fohjrn I Rzsx Dqwmegb make Deckel type FP 1 year 82 Technical data: x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Year of construction: 1978, Condition: refurbished (used), Universal tool milling machine Make: DECKEL Fshx Dodf E H Asqwmegb Model: FP 1 with stepless feed year of construction: ca. 1975 - partly overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometric acceptance with test report accessories: - 3-axis digital display FAGOR Innova 30i-M, new - fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - cooling device - operating instructions - used, as seen -

Year of construction: 1976, Condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 year of construction: 1976 - overhauled, new painted RAL 7035 light grey / RAL 7012 basalt grey RAL 5008 grey-blue machine no.: 1601 Milling head type: 2027 Milling head number: 1483 with warranty geometric acceptance with test report Fgjhx Dqod S Hztswmeb accessories: - 3-A digital display FAGOR Innova 30i-M, new - fixed table 800 x 420 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Central lubrication, manually operated - coolant device - Operating instructions -used, as seen-