Condition: good (used), Year of construction: 2000, machine/vehicle number: 7853, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table length: 6,000 mm, table width: 2,000 mm, table load: 17,000 kg, Travelling column milling machine | FPT Sirio-M50 Itsdpfx Aoxzzlhoh Ujr - Heidenhain control system - 60-position automatic tool changer - Coolant treatment and filtration unit - Chip conveyor - Cooling unit, manufacturer Deerosdassi (Italy) - Electrical cabinet - Full machine enclosure (protective housing) An inspection is possible at any time by appointment.

Condition: used, Year of construction: 2005, machine/vehicle number: 52-610-329, PCI Scemm Meteor 5 V6.1 4-Axis Horizontal Machining Center Itodpfexx Aq Hex Ah Uor X/Y/Z 630mm, spindle 15.000rpm / HSK-63-A, A-Axis swivelling table, CNC SIEMENS SINUMERIK 840 D

Condition: reconditioned (used), Year of construction: 2004, Universal Tool Milling Machine Make: KUNZMANN Model: WF 610 MC Year of manufacture: 2017 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine no.: 610648 Machine hours: approx. 2,100 hours machine on approx. 7,200 hours control on approx. 500 hours program run approx. 360 hours axes approx. 450 hours spindle S1 approx. 5 hours hydraulics with warranty Geometry inspection with test protocol Equipment/Accessories: - Path control HEIDENHAIN TNC 620 - Electronic handwheel HEIDENHAIN HR 510 FS, new - Oriented spindle stop, vertical and horizontal with thread cutting cycle without compensation chuck - Preparation set for touch probe TS 260 with mounting taper on operator panel Itodpfxsx H Nmae Ah Uer and spindle lock - Touch probe Heidenhain TS 260 - Fixed table 800 x 425 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Splash guard enclosure, traversable, electrically secured - Left side window of splash guard enclosure removable, electrically secured - Control panel on machine base - Operating manual Used as seen The machine is technically in accordance with the standard of its year of manufacture.

Condition: good (used), Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 70 to 250 mm, see photos -Quantity: 1x tensioning bracket available Ijdpjxy H E Defx Ah Ujtr -Dimensions: 400/200/125 mm -Weight: 6.8 kg

Year of construction: 2000, condition: ready for operation (used), Control Unit Brand Andronic Model 2000 Main Drive Itsdpfx Aex D Dymeh Uer Spindle speed range 25000 rpm Number of axis 3 Additional Equipment Scraper belt conveyor with discharge height 1200 mm Temperature stabilization switch cabinet with high-performance cooling unit This 3-axis MIKROMAT 8V gantry milling machine was manufactured in 2000. It features an Andronic 2000 control system, automatic tool change with a 16-position ATC, and a high-speed spindle capable of up to 30,000 rpm in short bursts. Equipped with a BLUM laser system for precise tool monitoring and measurement, and a scraper belt conveyor by Knoll for efficient chip removal. Consider the opportunity to buy this MIKROMAT 8V gantry milling machine. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2009, Control: Heidenhain TNC 320 Table Clamping surface: 1200 x 450 mm T-slots: 6 x 18 H7 mm Max. load: 400 kg Itsdpfx Ahjx H Iyre Ujr Feeds Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm Feed: stepless Rapid traverse X, Y: 4000 mm/min Rapid traverse Z: 1500 mm/min Feed motor AC (Z): 3.0 (10.5) Nm Spindle Speed range, stepless: 55 – 3000 rpm Spindle taper: ISO 40 Spindle gearbox: frequency controlled, 2-stage Spindle motor: 7.5 kW Swiveling head: 0 - 140° Dimensions Length: 2200 mm Width: 1800 mm Height: 2000 mm Weight Net weight: 2100 kg Gross weight: 2300 kg

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available stock machine from our showroom Stuttgart. ( subject to prior sale) Contact us for an offer. Ijdpfx Ahjibd Als Ustr EMCOMAT FB 450 with Siemens control. New machine immediately available. ( subject to prior sale) Contact us for an offer. We will be happy to make you an offer. Visit our demonstration center Arbeitsbereich X450/Y350/Z400mm Table size 800x400mm 7/10kW drive power speed range stepless 10-5000 rpm Siemens 828D Universal tool milling and drilling machine with Sinumerkik 828D contouring control and hydraulic tool clamping. Arbeitsbereich X450/Y350/Z400mm 7/10kW drive power Speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Sinumerik 828D contouring control with 15" multi-touch screen incl. control package in 3 axes with ball screws and servo motors, machining cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface

Condition: used, Year of construction: 2005, machine/vehicle number: 52-610-370, PCI Scemm Meteor 5 V6.1 4-Axis Horizontal Machining Center X/Y/Z 630mm, spindle 15.000rpm / HSK-63-A, B-Axis rotary table, CNC SIEMENS SINUMERIK 840 D Itodpfxjxx Apij Ah Usr

Condition: good (used), Year of construction: 1996, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 500 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, mount diameter: 40 mm, table length: 1,000 mm, table width: 500 mm, overall weight: 3,500 kg, X-axis / longitudinal 700 mm Y-axis / transverse 550 mm Z-axis / vertical 500 mm Table dimensions 1000 x 500 mm Spindle speed range stepless in 3 gear steps 25 - 4200 rpm Tool holder SK 40 Feed range X-Y-Z 1 - 10000 mm/min Rapid traverse X-Y-Z 10000 mm/min Weight approx. 3500 kg Control: Heidenhain TNC 407 - TNC 415 Itsdexg Rxbopfx Ah Uor

Condition: good (used), Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps Itsdpfx Ajw Upy Uoh Usr -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 25 to 180 mm, see photos -Number: 3x tensioning brackets available -Price: per piece -Dimensions: 160/100/H270 mm -Weight: 3.5 kg/piece

Year of construction: 1994, condition: ready for operation (used), General Data Machine weight 12000 kg Control Unit Brand HEIDENHAIN Model TNC415 This 3-axis Zayer ZF 2000 gantry milling machine was manufactured in 1994. It features a robust table clamping surface of 2000 × 800 mm, with longitudinal, transverse, and vertical travels of 1703 mm, 803 mm, and 863 mm respectively. It supports a maximum table load of 6000 kg and offers rapid traverse rates up to 15,000 mm/min. If you are looking to get high-quality milling capabilities, consider the Zayer ZF 2000 machine we have for sale. Contact us for more information. Ijdpfjx D Iaqjx Ah Uetr Application Types Milling

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, Multi-spindle milling machine Fritz Werner SSF 3Article number: 07-99-001Manufacturer: Fritz WernerVery good overall conditionMachine workshop testedDelivery time: Immediate - sale subject to prior saleYear of construction: approx. 1980Dimensions (L x W x H): approx. 1900 x 1800 x 1800 mmWeight: approx. 1200 kgTravel ranges:X-axis: approx. 600 mmY-axis: approx. 200 mmZ-axis: approx. 500 mmTable clamping area: approx. 740 x 220 mmSpindle:Speed range: approx. 3000 rpmDrive power: approx. 7.5 kWFeeds & rapid movements: in all 3 axesMax. milling area (dovetail): approx. 400 mm widthSwivel range of 1st & 3rd milling spindle: approx. 50-80 degreesHeight adjustment 1st & 3rd milling spindle: approx. 80 mmHeight adjustment 2nd milling spindle: approx. 50 mmAccessories:Left/right operationMechanical vice10 pieces of various milling head attachmentsWork lightFurther accessories available upon requestPrice and further technical details available upon request. Itsdpfx Aewl Aqvoh Ujr

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, total height: 1,990 mm, total length: 2,100 mm, table width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, workpiece weight (max.): 300 kg, Equipment: rotational speed infinitely variable, Universal milling and drilling machine with Heidenhain TNC 620 contouring control as manual machine operable via handwheels. Control can be locked via key switch and hydraulic tool clamping. Arbeitsbereich X600/Y400/Z400mm 7/10kW drive power speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Isdpfxeibarqo Ah Ujtr Heidenhain TNC 620 contouring control with 19" multi-touch screen incl. drive package in 3 axes with ball screws and servo motors, Fixed cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface, PC keyboard

Condition: used, Year of construction: 2000, machine/vehicle number: 5184, Danobat Danocenter NA-750 CNC Turning + Milling Center Ijdpjxx Admsfx Ah Ujtr max swing 700mm, X/Y 255/520mm, 12-Pos-Upper-Tool-Turret and 8-Pos-Lower-Tool-Turret with driven tooling, Measuring Head, Tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15to

Condition: used, Year of construction: 1999, x-travel 4000 mm Itjdpfx Ahjxzuz No Uor y-travel 1000 mm z-travel 1500 mm Control Heidenhain 355 weight max. 10 t ja more pictures available

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Isdpfx Aox Ifdksh Uetr Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: ready for operation (used), Year of construction: 2000, Main Drive Spindle speed range 45000 Spindle motor power 6 kw Movement X-Axis Movement 2450 mm Y-Axis Movement 1400 mm Z-Axis Movement 800 mm Itodpfjx D E U Sex Ah Ujr This 5-axis GEISS FZ 2000 x 1000 was manufactured in 2000. It features a robust CNC milling machine capability with X-axis travel of 2450 mm, Y-axis of 1400 mm, and Z-axis of 800 mm. The milling spindle supports a maximum speed of 45000 rpm with a power of 6 kW. Consider the opportunity to buy this GEISS FZ 2000 x 1000 CNC milling machine. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2003 Machine No. 344174 >> Fixed angular table >> Infinitely variable spindle speed up to 4000 rpm >> Infinitely variable feed in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/320/400 mm >> Table area: 650 x 350 mm >> Table load: 250 kg Isdpfx Ahsx Elxps Ustr >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirements approx.: 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control manual, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel Heidenhain About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a facility where it was only sparingly used for training purposes. The control system is very easy to operate. The machine also features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very straightforward by simply swiveling the vertical head aside. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected in our workshop. You are welcome to view and test the Kunzmann under power at our facility. The machine is available immediately.

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 80 rpm, total height: 1,550 mm, total width: 1,410 mm, total length: 11,150 mm, overall weight: 500 kg, The EMCOMAT FB-3 L is ideal for use in tool and mould making, in apparatus and prototype construction and in small series production. It has also proven itself many times in schools and training workshops. As the smallest machine in the EMCO milling machine range, the FB-3 L already meets the highest demands for accuracy and flexibility - and that at an unbeatable price-performance ratio. Travel in X/Y/Z 300 / 200 / 350 mm Distance spindle nose table 80 - 430 mm Clamping surface 600 x 200 mm (rigid angle table) Max. table load table load 50 kg (rigid angle table) Isdpfxjdtm Ahe Ah Ustr Speed range 80 - 2200 rpm Power 1,4 kW Tool holder SK30 DIN2080

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm Itedpfevvnfuox Ah Usr z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: used, Year of construction: 2010, x-travel 6500/13500 mm y-travel 4000 mm z-travel 1500 mm w-travel 2250 mm Isdpfx Aewa Dxqjh Uotr Control SIEMENS 840 D table surface area 5500/12500 x 3000 mm distance between columns 3800 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 50000/75000 kg ram head dimension 520 x 625 mm spindle speed 5000 U/min milling spindle motor 63 kW max. torque on the spindle 2900 Nm Tool bore DIN 69893 HSK-A 100 feeds x/y/z 24 m/min feed w-axis 6 m/min rapid traverse x/y/z 40 m/min total power requirement 120 kW weight of the machine ca. 250 t dimensions of the machine ca. 29,5 x 9,5 x 8,2 m Equipment / Accessories: - automatic tool magazine for 212 tools - automatic milling head magazine for 6 milling heads - Machining modules/ Milling heads: 1. Machining module -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 2. Machining module -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3. Machining module -angle BM extended- 40 kW, 4000 rpm, 1800 Nm, HSK-A 100 4. Machining module -angle BM - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 5. Machining module -angle BM - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6. Machining module -Universal Index BM - 40 kW, 4000 rpm, 2100 Nm - C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 - Measuring probe - Coolant device - Chip conveyor - Technical documentation

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 8105, Universal milling machine 1300 KOMBI Itedox Ezaispfx Ah Usr

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 5100 mm Measurements depth 10500 mm Itedjx D Hcwspfx Ah Ujr Measurements height 4900 mm Machine weight 51000 kg Control Unit Brand SIEMENS Model SINUMERIK 840D Additional Equipment Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2006, x-travel 3.500 mm Iedpfjx Hp Drjx Ah Ustr y-travel 2.600 mm z-travel 1.000 mm Control HEIDENHAIN iTNC-530 table-size 4.500 x 1.500 mm distance between columns 2.300 mm rapid motion - x-axis 15.000 mm/min rapid traverse Y,Z 12.000 m/min feed 5.000 m/min tool taper ISO 50 number of spindle speeds 5.000 U/min/rpm milling head -swivable UAGA 3.000 U/min 45 Grad spindle drive 22 kW transmission ratio 2 table weight 15.000 Kg Tools changer 30 fach/tools handwheel HEIDENHAIN HR 410 air pressure 6 bar total power requirement 44 kW weight of the machine ca. 25 t - Auto Indexing Head 2, 5º /2.5º - Automatic Support in the right side for Head UAGA - Direct Output Head. - Automatic Head Changer - Automatic tools changer

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools Iodpfx Ahewa Dx Re Uotr - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation