Condition: used, Spindle moulder SCM T130 NPS - used - fine-adjustable fence, tenoning and slotting table, right-/left-hand rotation ----- Technical Data ----- Table size: 1,080 x 750 mm, Spindle diameter: 30 mm, Speeds: 3,000/4,500/6,000/7,000/10,000 rpm, Extraction port Ø: 120 mm, Bedpfx Aew Nv Nfeacjww Lower extraction port Ø: 120 mm

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Bwodow Ip Dgopfx Aacjw Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”

Condition: excellent (used), functionality: fully functional, SCM T120C Spindle Moulder with Sliding Table Specification: Bwsdpfx Aaewthmxecow • Condition: Used, fully serviced • Manufacturer: SCM • Model: T120C • Spindle diameter: 35 mm (option to change to 30 mm – extra cost PLN 1,500) • Motor power: 4 kW • Star-delta motor starting • Left/right spindle rotation • 4 belt-driven speeds: 2,900/4,400/6,000/7,200 rpm • Manual up/down adjustment • Foot brake and foot spindle lock • Longitudinal sliding table, suitable for tenoning, length: 105 cm • Original paintwork • Overall dimensions: 100 x 110 x 110 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Photos illustrate the actual condition of the machine • Possibility to test the machine on-site.

Condition: good (used), Year of construction: 1985, table diameter: 1,600 mm, rotary table diameter: 1,600 mm, 2x spindles (motors) for shaping 2x sanding devices Bjdpfx Aoxqhcxsacoww Table diameter 1600 mm

Condition: used, functionality: fully functional, SCM spindle moulder vertically adjustable spindle 3-roller power feed 5 spindle speeds SCM T130 spindle moulder – used – fine-adjustable fence, tenoning and mortising table, right/left rotation Bwjdpexb Au Refx Aacew Table dimensions: 1,080 x 750 mm, spindle diameter: 30 mm, speeds: 3,000/4,500/6,000/7,000/10,000 rpm, extraction port Ø: 120 mm, lower extraction port Ø: 120 mm

Condition: excellent (used), Panhans 240A spindle moulder (bottom spindle) Spindle diameter: 30 mm Spindle length: 130 mm Variable spindle speed: 3000/4500/6000/9000 rpm Electronic spindle height adjustment Electronic fence adjustment Electronic angle adjustment SCM 4-roller power feed Bwjdpfoxg Iz Hjx Aacow

Condition: ready for operation (used), functionality: fully functional, 1 x CP Bourg BCMEx - CP Bourg BSR - CP BMEx - CP Bourg Squarefold - CP Bourg BSF 26 + Watkiss Spinemaster C.P. Bourg Inline Booklet Maker - BMEx for Nuvera Face trimming is included as standard with the BMEx. Saddle, corner, and top stitching are also supported. Operators can select top, edge corner, or saddle stitches (one, two, or four stitches) via a simple menu on the BMEx control panel; choose a top-stitch bypass while other finishing options remain available; make fine adjustments to stitch positions, fold positions, or trim distances in increments of 1/10 mm “on the fly” during operation. Up to 50 sheets (80 gsm) can be stapled. The BMEx can stack up to 50 booklets, depending on the number of sheets per booklet. The conveyor can be unloaded during operation. Ready for use this Friday – ideal for streamlined booklet production with Xerox, either inline or offline. E.g. for: • Xerox iGen family • Xerox Nuvera family • Xerox Color 800i/1000i Presses • Xerox Versant 2100 • Xerox Color 8250 Inspection welcome. Tested and fully functional – regularly serviced and very well maintained over the years. B2B sales only. Bsdpjwf Ryxofx Aacsww Inspection welcome in northern Germany.

Condition: ready for operation (used), Perimeter tenoning machine BALESTRINI model TO 2 working fields, Bwsdpswxrmtjfx Aacew round/longitudinal tenons – independent processing, adjustment of tenon thickness and width, adjustable table angle setting.

Condition: ready for operation (used), total height: 890 mm, total width: 900 mm, total length: 1,150 mm, spindle diameter: 35 mm, table length: 1,110 mm, table width: 245 mm, type of input current: three-phase, rotational speed (min.): 3,200 rpm, rotational speed (max.): 10,000 rpm, Good morning, We offer for sale a spindle moulder with bottom spindle, manufactured by GRIGGIO, model T2000. Bwodorfaxxopfx Aacsw Here are a few useful details about the machine: * Spindle diameter: 35 mm (option to change to 30 mm for an additional 1,500 PLN) * Motor power: 4 kW * Star-delta motor starter * Left/right spindle rotation * 5 spindle speeds adjustable by belt: 3/4.4/6/7/10 thousand rpm * Manual up/down adjustment * Foot brake and foot spindle lock * Longitudinal sliding table, e.g. for tenoning, dimensions: 24.5 x 111 cm * Original paintwork * Overall dimensions: 115 x 90 x 89 cm (L x W x H) This machine has been in regular use in a joinery workshop and shows acceptable signs of use, but it has undergone a comprehensive and rigorous inspection at our facility to eliminate any potential faults. This guarantees that the machine is fully operational, requires absolutely no further investment, and is ready for immediate use in your workshop.

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Save working time with recallable tools; once set up, the drive unit can be brought back to the preset position with a single movement Mobile and flexible in use; beveling, grooving, flush milling Addition to table and CNC milling machines Table size 520 x 430 mm Bsdpfew I Upzjx Aaceww with fine adjustment #10450 Availability: short-term Storage location: Flörsheim

Year of construction: 2005, condition: excellent (used), chamfers PVC edges and others pneumatic pressure Bsdpfx Asidmvnsacoww power supply 380V perfect condition

Condition: excellent (used), Carousel Milling Machine RYE 40 SM SPEEDMAX Number of units: 3 Unit configuration: Milling machine Bodpfsxf Iudjx Aacsww Milling machine Grinding machine Pneumatic central material pressure

Year of construction: 2008, condition: like new (used), UINZE 6T CNC 1 milling aggregate per side, 2 universal aggregates (for milling and sanding) per side Bwsdpfekxc Smox Aacsw

Condition: good (used), Chain mortiser, chain cutter, lock case cutter, lock case mortiser -Manufacturer: Festo, chain mortiser type PP on transport frame -Motor power: 1.6 kW Bedpfx Ajh Nvy Nsacjww -Connection: 380 volts -Accessories: incl. see photo -Total dimensions: 800/700/H1600 mm -Weight: 232 kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, height adjustment type: mechanical, RM Group Spindle Moulder (Under Spindle) Specification: • Condition - used, fully serviced • Manufacturer - RM Group • Model - SM 110 • Spindle diameter 30 mm • Motor power 4 kW • Star-delta motor starter • 3 belt-regulated spindle speeds: 6,000 / 8,000 / 10,000 rpm • Manual up/down adjustment • Original paintwork • Extraction port - 120 mm • Year of manufacture - 2009 • Weight - 360 kg • Dimensions: 112 x 75 x 115 cm (L x W x H) Bjdew Avxbopfx Aacsww Additional information: • Very good, factory technical and visual condition • The presented photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: used, Year of construction: 1974, Used machine Year of manufacture: 1974 Bodew I Urispfx Aaceww Equipment and technical data: Spindle diameter: 30 mm 6 spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm Machine has no motor brake and can therefore only be sold as a spare part carrier! Availability: short term Location: Flörsheim

Year of construction: 1989, condition: good (used), - tilting spindle under the account - shaft diameter 50mm - up and down adjustment Bwedpfx Aaegxpilecjw - pneumatic adjustment of the spindle position - 400V power supply - THE FEED IS NOT THE SUBJECT OF THE OFFER

Condition: excellent (used), Table router with roller table and pneumatic clamp and feed unit HolzHer ETZ 4 speeds 2 - 12 m/min 3 rollers 30 mm spindle Bwsdpeudwlzjfx Aacew Sturdy design Milling fence with fine adjustment 4.5 kw Weight approx. 600 kg

Condition: used, Special pantograph for milling children's bed legs. Bodpfx Ajpwt D Eeaceww Foot-operated head movement, pneumatic piece movement.

Condition: used, Haffner SL100 Door Lock Mortising Machine Used, function tested Technical Data: - Includes 16 mm chain set - Includes guide bar 9 - 11 mm x 150 mm - Includes guide bar 12 - 17 mm x 150 mm - Includes guide bar 12 - 17 mm x 175 mm Bwodpfx Aswzkgkeacow - Includes chain lubrication device - Includes 2 manual workpiece clamps - Chain mortising motor: 1.7 kW / 2800 rpm - Faceplate milling motor: 0.6 kW / 25000 rpm - Drilling motor: 0.4 kW / 2800 rpm - Milling length / slot length, chain: 20 - 450 mm - Milling length, faceplate cutter: 315 mm - Max. drilling hole spacing: 365 mm - Milling depth / slot depth, chain: 150 mm - Max. faceplate cutter depth: 35 mm - Depth for handle and keyhole drilling: 65 mm - Milling width / slot width, chain: 6-40 mm - Max. faceplate cutter Ø: 35 mm - Max. handle and keyhole drill Ø: 40 mm - Clamping capacity - Door thickness: 80 mm - Max. door width: 1050 mm - Min. door width: 550 mm - Max. door width with spacer: 1250 mm - Min. door width with spacer: 750 mm - Weight: 165 kg

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Machine checked/overhauled in the workshop Table size: 1100 x 760 mm Motor: 4.7/5.7 kW, pole-changing Right/left rotation Mill arbor: MT 5/30 mm Height and tilt adjustment via handwheel Speeds: 3000/4500/6000/9000 rpm Mill arbor tilt range: -5 to +45° Mill attachment with metal jaws Bwsdpfxsw I U U Do Aacow mounted on a round insert plate and thus rotatable 360° With table extensions on both sides with extendable frame support With 4-roller feeder Weight: approx. 900 kg Pictures show the machine in non-overhauled condition Availability: approx. 4 weeks after order placement Storage location: Florsheim

Condition: used, Camam brand tressi milling machine model FT2A Bwodpfx Ajiy Elljacew

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm Bjdpfx Aew Naa Isacoww instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: used, Year of construction: 1980, Used machine Condition: various small defects without chains Equipment and technical data: Stroke left/right: 150 mm, Top/bottom stroke: 150 mm Motor: 1.5 kW Bwsdpfx Aaew I U Nhocsw Can be used as a spare parts carrier Availability: short term Location: Flörsheim

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: workshop-inspected Column extension: 750 mm Bjdpfx Ajw I U Udjacjww Spindle stroke: 100 mm Max. clearance between table and spindle: 310 mm Spindle speed: 10,000/20,000 rpm Motor power: 2.2/3.3 kW Tool clamping: collet chuck With air blast device via compressed air connection External dimensions: 905 x 1380 x 1600 mm Weight: 533 kg Availability: by arrangement Location: Hochheim