Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x1295x1300 mm Weight 1500 kg Total power requirement 16,1 kw Cgjlq Risvz Egtev Nst

Condition: new, Year of construction: 2024, STOMANA T 1000 S Dimensions of the work table, mm 1000 x 550 Dimensions of the movable table, mm 1150 x 350 Spindle diameter, mm 30 Spindle tilting 90° / 45° Vertical travel of the spindle, mm 175 Spindle working height, mm 125 tool diameter, mm: - for shaping - for machining of journals diam. 180 Wed. 250 Engine power, kW (HP) 4.0 (5.5) Revolutions, min-1 1400 / 3500 / 6000 / 8000 Colq Riellun Nsv Negt Weight, (kg) 390 Telescopic guide bar 900 with 2 stops: Left / right spindle rotation: Spindle protection for profiling, mm dia. 250

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Celq Reiknp Reiv Negt Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: good (used), Year of construction: 2003, Head machining of posts, boards, laths for tear-free machining. Cgelq Riegmt Erev Not with magazine which works itself off automatically 2 milling spindles move independently from the outside to the middle so that there are no tears.

Condition: used, Balestrini Double Rounding Tenoning Machine, automatic with loader, complete with drilling unit Cgolsv Rd Etsq Riv Njt

Condition: like new (used), Year of construction: 1998, operating hours: 300 h, Functionality: fully functional, machine/vehicle number: 9800491, Shaft size 30mm, -5 to +45 degrees, Aigner milling stop, table extension, Festo 3-roll feed, control panel, five speeds, left and right rotation, work switch, motor protection, shaft stop, manual, emergency stop, motor brake, CE approval Cgjlq Rou Egq Eeiv Njt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1780x850x1250 mm Celq Rijvz Egaev Njgt Weight 1000 kg Total power requirement 12 kw

Condition: new, Year of construction: 2024, ROBLAND T 120 TP voltage 3 x 230V / 3 x 400V weight 1070 kg motor power 7 kW (optional 9.2 kW) table dimensions 1200 x 705 mm Cgjlqellup Rj Riv Net table height 930 mm interchangeable spindle diameters 30 / 32 / 40 / 50 mm 1" 1/4 spindle length 180 mm height adjustment 205 mm number of revolutions per minute 3000 / 4500 / 6000 / 7000 / 10000 max diameter and height of the table 320 x 95 mm dimensions of the movable table 760 x 500 mm table height adjustment 1050 mm diameter of the extraction spigot 120 mm

Condition: excellent (used), Year of construction: 1994, Chain chisel / chain cutter with pusher drilling unit a complete lock case can be milled/drilled within 30 seconds no reclamping for the entire process quick change from left to right doors Can also be used as a normal chain cutter 3 motors Motor power 1 x 2.2 kW & 2 x 0.5 kW, 400 V, 50 Hz mortising length 320 mm Grooving depth 150 mm mortising width 6 - 40 mm Door thickness 40 - 80 mm Door width 400 - 1050 mm Weight 192 kg incl. clamping device Oil lubrication device 1 stop drum 2 side stops 1500 mm incl. various spare drill bits including spare chain Cgelqjul U Iwo Riv Net including all documents

Year of construction: 1972, Condition: good (used), Milling machine with 2 spindles and stroke for 4 tools. The spindle can move hydraulically forward and backward and up and down. 40 mm diameter and 200 mm clamping length. In addition a grooving saw is placed from above. Cgslsgmnzlsq Riv Nst

Condition: used, Bacci Double Rounding Tenoning Machine with Loader Cgslq Ropk Ta Rjiv Nst

Year of construction: 2008, Condition: like new (used), Milling cutter jointing cutter Leuco As good as new 7209599 00173710 Cgjlq Rijg D Ny Njv Not 43.018.02 125X25X30 Z= 2 + 2 DP n 6.100 - 10.500

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x1220x1300 mm Weight 1050 kg Cgelqsvz Ef Ao Riv Net Total power requirement 16,1 kw

Condition: used, Year of construction: 1988, Sliding table movement: manual. Number of material clamps: 1. Material clamping: pneumatic. Crosscut saw: rigid from below. Max. saw blade diameter: 400 mm. Max. cutting height: 120 mm. Saw shaft diameter: 30 mm. Crosscut saw motor power: 2.2 kW. Milling spindle: 40 mm diameter, stroke 80 mm. Handwheel. Spindle motor power: 5.5 kW. Storage location: Nattheim Cgolq Risv Rbdmov Not

Condition: excellent (used), Year of construction: 2004, chain mortising machine with additional unit made up of two horizontal routers for the execution of the handle and the key holes and two adjustable and motorised swinging units for the execution of slots vertical working unit: max work piece thickness 230 mm max work piece height 710/ 1050 mm vertical stroke length 150 mm Cslolpcffsq Riv Nogt horizontal stroke length 300 mm traverse head stroke 80 mm head tilting +/- 45 deg. vertical stroke of head stock bracket 250 mm headstock bracket tilting +/- 45 deg. max. workpiece height 1000 mm chain motor 2,2 kW, 400V, 50 Hz horizontal working unit: swinging unit no. 2 min/ max. longitudinal stroke 80/ 130 mm manual traversal stroke 140 mm pneumatic transversal stroke 140 mm swinging unit motor 0,18 kW, 400 V, 50 Hz router motor 1,8 kW, 400V, 50 Hz weight approx. 650 kg incl. pump for automatic chain lubrication incl. tools incl. manual Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, SAOMAD TITANUM CNC machining center for doors and windows – precision, power, and productivity combined! A top-quality opportunity – inquire now before it's too late! The SAOMAD TITANUM: Thanks to its innovative locking system technology and automatic workpiece measurement, reduced machining times, maximum flexibility, and uncompromising precision. Highlights & technical features at a glance: Automatic workpiece handling: • Electronically controlled workpiece turning unit with brushless motors • Semi-automatic rotary clamping system for double-sided tenon machining – without wasting time Powerful machining units: • Short-cut saw with 400 mm diameter & pneumatic plunge adjustment • 2 profiling spindles (50 x 320 mm) & 1 fitting groove spindle (40 x 170 mm) • Upper horizontal milling spindle for radius machining + glazing bead saw Sash bypassing & rebating: • Special system for bypassing sash frames (up to 600 mm wide) • Equipped for sloped windows, rebating, and shatter protection Smartly controlled – implemented with high precision: Cslq Rivjv U Nm Rs Negt • SCM Jolly PC control • Continuously variable spindle stroke • 12-position tool changer, HSK-F63 clamping system • Integrated workpiece return Technical specifications at a glance: • Spindle diameter: 50 mm • Spindle lengths: Slotted spindle 320 mm | Profile spindle 320 mm | Geared spindle 170 mm • Tool thickness: 120 mm • Cutting width / height: 120 mm • Radius motor & radius groups Ø: 200 mm • Machinable workpiece width: 200 – 500 mm • Horizontal spindles: 2 • 5-axis technology: ✔ • Conformity: CE mark Space requirements: • Length: 4600 mm • Width: 2300 mm • Height: 1841 mm Why the TITANUM? Because it combines everything modern manufacturing demands: automated, fast, precise – and flexible for every window geometry. Its robust construction and intelligent control system make it a true all-rounder for small, medium and large companies.

Condition: new, Holzkraft minimax t 45c table router (5502044) Low-priced, with rigid milling spindle and cast iron work table. - Sturdy cast steel construction - With rigid milling spindle - 3 spindle speeds 3500 to 10000 min¯¹ - Milling spindle with right-left rotation - Large dimensioned milling unit made of grey cast iron, directly fixed to the table - With suction hood under the worktable for better extraction - Solid and precise cast iron table - Quick and easy speed change - Powerful motor with 5,0 kW - Standard arc milling protection hood - Quality Made in Italy Equipment details Cast iron milling unit - Directly mounted on the milling table - Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life - 3 milling speeds from 3500 to 10000 min¯¹ Cgeljkyt Ulsq Riv Not Powerful motors - Equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence - Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. - The integrated suction connection ensures a clear view Milling table opening - A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood - Included as standard Reversible fence jaws - versatile integratable stop for bridging the tool gap - enables safe working even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimum protection on every router table, individually adjustable to the task at hand - Universal basic elements for mounting AIGNER safety and working devices - Quickly adjustable due to simultaneous clamping of all individually adjustable rods - Made of high quality aluminum - Can be used universally on all HOLZKRAFT table routers - 500 mm: Item no.: 5851000 - 650 mm: Item no.: 5851650 TECHNICAL DATA Dimensions and weights Weight (net) approx.: 240kg Suction connection Suction port diameter: 2 x 120mm Work table Working table length:1000mm working table width: 575mm table height: 900mm Set up information Required space length: 1945mm Required space width/depth: 920mm Explanation of space requirements: The dimensions take into account maximum travel distances or useful lengths. Machine body length: 1000mm Machine body width/depth: 575mm Working area length: 1600mm Working area width/depth: 1600mm Explanation of working area: Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage: 400V Mains frequency: 50Hz Power drive motor: 5,0kW Milling spindle useful length of the spindle: 100mm spindle protrusion max. over table: 130mm Spindeldrehzahl(en): 3500/7000/10000min¯¹ spindle arbor diameter: 30mm Milling tool diameter max. Tool diameter max. lowerable: 180mm Tool diameter max. profile milling: 210mm SCOPE OF DELIVERY - arch milling protection cover - aluminum stop jaws Holzkraft dealer - accessories available on request!

Condition: used, Year of construction: 1995, CAMAM GC6/6F-2L rotary milling machine Number of milling units 6, grinding units 2 Maximum width of material 250mm The maximum height of the material 150mm Maximum length of material 1200mm Feed speed adjustable 0-17m/min Cslqeur Htle Riv Negt Machine in the cabin

Condition: used, Year of construction: 1985, Functionality: fully functional, machine/vehicle number: V 139200, overall weight: 1,200 kg, table length: 1,180 mm, table height: 840 mm, table width: 800 mm, MARTIN T25 Tilting Spindle Router In very good condition, everything works perfectly All bearings and guides are OK, the machine runs flawlessly Year of manufacture: 1985 A stop jaw on the router stop can be adjusted in depth, with fine adjustment and a scale, allowing planing work, e.g., with a glued profile. With spindle lock via lever 2 extraction nozzles, 125 mm on the router stop and 100 mm on the machine table 30 mm spindle, continuously electrically adjustable from -5 to 45° With right/left rotation Table opening up to 480 mm, which can be reduced using various rings Electric spindle height adjustment Very robust and durable design Optimal power transmission via V-belt drive With manual Including AIGNER integral stop jaws Cgslq Rijwdvvvsv Nst Including 4 Wegoma rollers, continuously adjustable feed, in mint condition Condition Machine table dimensions: 1180 + 800 mm Machine is ready for immediate use 380V, 5000 and 6000W with 2 speeds with all necessary safety features, motor brake, and emergency stop switch. The machine is approved by the German Wood Industry Association (Holz-BG) and has the GS and CE test seals. The machine weighs approximately 1200 kg Professional device

Condition: used, Year of construction: 1985, Table length: 2500 mmSpindle adjustment range: 120 mmTable width: 760 mmDesign: swivelingSwivel angle forwards: + 45°Swivel angle backwards: - 5°Extendable frame support:Selection of speeds: Belt change+pole switchingCone of the milling spindle: MK 5Material of stand: Cast ironControl panel position: topSpindle height adjustment: Handwheel and electricSpindle swivel adjustment: Handwheel with dial gaugeSpindle lock: ManualSpindle brakes: ElectricSpindle direction: Left/right rotationMotor power: 4.7 / 5.7 kWClosing of the table opening: Insert segmentStop jaw design: Aigner jawsStop adjustment: ManualMilling stop display: ScaleMilling jaw adjustment: ManualFeed device: Yes, 4 rollers HaffnerFeed setting: Fixed speedsDimensions: 2500 x 1500 x 1900 mm Csljv Rbb Ejq Riv Negt Storage location: Supplier

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Cgslq Risr A Eq Rov Not Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: like new (used), Year of construction: 2022, power: 6 kW (8.16 HP), Mafell ZAF 250 demonstration machine (max. 2-3 used for demonstration purposes) Item No.: 991201 Included in delivery: -1 milling head, complete with reversible blade; Order No. 202105 -1 support table, Order No. 205025 Maximum timber dimensions (W x H) at right angles: 500 x 250 mm Maximum timber dimensions (W x H) at 60°: 220 x 250 mm Length of support with scale: 3000 mm Feed speed: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idle speed: 6670 rpm Nominal power consumption: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly, accurately, and efficiently. -Straight tenons, angled tenons, corner and ridge joints - with the compact ZAF 250 Vario, you're on the safe side. -An exact length scale can be adjusted using a stop. -The milling tool, specially developed for the ZAF 250, can be quickly adjusted for different tenon lengths and for tangential milling. -The ZAF 250 Vario features precise adjustment options and a clearly structured control panel. A built-in laser assists you in the exact positioning of the wood. Result: Milling cuts accurate to the millimeter in any wood! -After setting the tenon geometry, the milling head automatically follows the tenon shape and delivers the desired tenon – including face-off, shouldering, and chamfering. -The ZAF 250 Vario has an adjustable feed rate for hardwood applications. Cjlq Riswazn Asv Njgt Area of application: -Tenon and tangential milling up to 60° -Materials used, e.g., solid wood and laminated timber Advantages: -Significant time savings – thanks to simple and quick adjustment of length, angle, and tenon dimensions. -Maximum wood dimensions: 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – the pivoting head ensures the workpiece always remains in the same position. -No wood waste – fully vacuumable.

Year of construction: 2006, Condition: excellent (used), The BACCI FC 8 machine is an advanced device designed for copying, milling, and sanding wooden components, such as parts for chairs, tables, furniture, bed frames, and other complex-shaped elements. Its high precision and exceptional finishing quality make it highly regarded in the furniture industry. This model is equipped with 8 working heads, allowing for the simultaneous execution of multiple machining operations. The numerical control system (CNC) enables precise machine settings and easy programming. This allows operators to quickly adapt the machine for various tasks, significantly increasing productivity. Specifications: - Machine number: 1680 - Power supply: 380V, 50Hz, 86kW - Max machining length (X-axis): 2500 mm - Unit strokes: A, B, C, D, U, V, W - Z-axis travel: 370 mm - Worktable tilt angles: -10°, 0°, 10° - Max vertical spindle travel: 20 mm - Spindle diameter: 40 mm Maximum tool size: - Diameter x Height: 160 x 180 mm - Sandpaper size (L x W): 2360–2400 x 180 mm Spindle speeds: Cjlspy D Acoq Riv Nsgt - Spindles 1-A and 2-B: 8500 RPM - Spindles 3-C, 4-D, 5-U, 6-V, 7-W, 8-Z: 500–8500 RPM Power and air requirements: - Total installed power: 120 kW - Air pressure: 6 bar Machining capacities: - Max machining length (with standard rounding): 250 mm - Max processing width (with rounding): 500 mm - Max processing height: 180 mm Speed and acceleration: - Max table feed speed: 30 m/min - Max table return speed: 100 m/min - Max aggregate acceleration: 5 m/sec² Aggregates: - Milling units (1+1): with 15 HP motors - Milling units (1+1): with 10 HP motors - Milling/sanding units (1+1): with dual-polarity motors, 6.5 to 4 HP - Sanding units (1+1): with 4 HP motors Additional features: - Control system: OSAI - Machine weight: approx. 750 kg - Machine dimensions: 4000 x 2400 x 2000 mm - Packing weight: approx. 1500 kg

Condition: new, Year of construction: 2024, Functionality: fully functional, height adjustment type: electric, power: 7.5 kW (10.20 HP), Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Cgelq Riou Nz Ndsv Not Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: good (used), Year of construction: 1995, machine/vehicle number: 288.I.8, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. Celq Rivjvvvr As Njgt ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine.