Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements Guedpfxox Eifks Ab Usk and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Year of construction: 1995, condition: good (used), Single-shaft shredder, waste shredder, cutting mill, auxiliary mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Condition: Single-shaft shredder is equipped with a good set of blades. -Manufacturer: Vecoplan, Side-mounted mill cutting mill -Type: VAZ120/105 -Processing capacity: 200-3000 kg/h Gusdpfoxlcqtox Ab Ujk -Number of sieves: 2 pieces Ø20 mm, Ø30 mm -Drive motor: 18.5 kW -Number of cutting blades: 27 pieces -Number of counter blades: 1 piece -Inlet cross-section: 1240 x 1075 mm -Rotor width: 1075 mm -Rotor diameter: 230 mm -Dimensions: 2000/2700/H2370 mm -Weight: 2800 kg

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm Gujdsx Hhi Hopfx Ab Uek diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: used, Specac Specac Atlas 15T Laboratory Press with Temperature Controller, Heating Plates, and Film-Making Set Description: For sale is a complete Specac system for laboratory sample preparation. This set is particularly suitable for the production of pellets, thin films, and other samples for FTIR or materials analysis. The system includes the following devices: - Specac Atlas™ Manual Hydraulic Press (15 tons) - Specac 4000 Series™ Temperature Controller - Specac Atlas™ Heating Plates - Specac Constant Thickness Film Maker accessory set in a transport case - All relevant manuals and the original quality certificate The equipment comes from a laboratory and is in perfect technical condition. The visual condition is very good with only minor signs of use. Technical Specifications Specac Temperature Controller - Model: 4000 Series - Operating voltage: 230 V - Frequency: 50 Hz - Maximum power consumption: 1800 W - Fuse: 7 A Specac Atlas Manual Press - Maximum pressing force: 15 tons - Robust metal construction - Integrated pressure gauge - Suitable for the preparation of laboratory pellets Specac Heating Plates - Temperature-controlled sample heating - Direct connection to temperature controller Guodpfex A T T Hex Ab Ujk Film-Making Set - Complete accessory case - For producing uniform sheets/films - Various inserts and tools included Scope of delivery - Atlas 15T laboratory press - 4000 Series temperature controller - Heating plates - Film-making set in case - Connection cables - Original manuals - Quality certificate (Specac, 2014) Important Note: “The table shown in the photos is not included in the sale.” Condition: Used (Specifications and details are subject to change and may contain errors!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: Gjdpex Dkmgsfx Ab Ujuk This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Gusdpex Dip Tjfx Ab Usk Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 90 mm, displacement volume: 2,990 cm³, Clamping force 13000 kN Distance between tie bars (h x v) 1380 x 1280 mm Mould opening stroke 2200 / 1500 mm Mould height min 650 / 1350 mm Max. daylight 2850 mm Hydraulic ejector - stroke 350 mm Ejector force 230 kN Injection unit: Screw diameter 90 mm Ls/D ratio 24.4 Injection pressure 2270 bar Stroke volume 2990 ccm Shot weight (PS) 2721 gr. Screw speed 133 1/min Plasticising rate max. 88,1 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 94,5 kW Installed heating capacity 75,55 kW Reservoir capacity 1070 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,50 x 3,40 m Total machine weight 33000 kg Accessories: Gujdpfx Absx Hygwj Uek - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 2000, Lechmann*MÜH plastic sleeve welding machine, make GEORG FISCHER GF+ESA+24 S, year of manufacture approx. 2000. Gjdpfovk D D Nex Ab Ujuk

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Gedpfox Hhimox Ab Usuk Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line including a Kraus Maffei Injection Molding Machine, Model 50/55 CX with Krauss Maffei handling unit, Model LRX 100 (serial 2118838); tray unstacking station; discharge blower, collection device and tray filling station; and Kemapack GmbH strapping/wrapping machine. Gedpfx Aemn Tu Hsb Uouk

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, injection pressure: 3,000 bar, mold height (min.): 200 mm, opening stroke: 450 mm, overall weight: 4,800 kg, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language Gujdpfx Asx A Uc Nob Ujk CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 90 mm, displacement volume: 2,990 cm³, Clamping force 13000 kN Distance between tie bars (h x v) 1380 x 1280 mm Mould opening stroke 2200 / 1500 mm Mould height min 650 / 1350 mm Max. daylight 2850 mm Hydraulic ejector - stroke 350 mm Ejector force 230 kN Injection unit: Screw diameter 90 mm Ls/D ratio 24.4 Injection pressure 2270 bar Stroke volume 2990 ccm Shot weight (PS) 2721 gr. Screw speed 133 1/min Plasticising rate max. 88,1 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 94,5 kW Installed heating capacity 75,55 kW Reservoir capacity 1070 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,50 x 3,40 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller Gsdpfx Abjx Hyf Te Ueuk - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Gsdpfx Asx Hhiaob Usuk Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line with Injection Molding Machine, Model 110/750 CX with Digicolor Drying Station, Model DW 25/40 (serial 191511221); Krauss Maffei handling unit, Model LRX 100 (serial 2118836); Keyence Deutschland GmbH Discharge Blower, Model SJ-FW; and associated belt conveyors. Gsdpfxomn S Efs Ab Usuk

Year of construction: 2017, condition: good (used), Temperature control unit Tool Temp TT-181 Stock no.: 503647 Machine/Device type: Temperature control unit Guodpfx Ajx A Swqsb Usk Manufacturer: Tool Temp Type: TT-181 Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 90 mm, displacement volume: 2,990 cm³, Clamping force 13000 kN Distance between tie bars (h x v) 1380 x 1280 mm Mould opening stroke 2200 / 1500 mm Mould height min 650 / 1350 mm Max. daylight 2850 mm Hydraulic ejector - stroke 350 mm Ejector force 230 kN Injection unit: Gjdpfx Aex Hydvsb Usuk Screw diameter 90 mm Ls/D ratio 24.4 Injection pressure 2270 bar Stroke volume 2990 ccm Shot weight (PS) 2721 gr. Screw speed 133 1/min Plasticising rate max. 88,1 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 94,5 kW Installed heating capacity 75,55 kW Reservoir capacity 1070 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,50 x 3,40 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min Gujdpfex Hhhpex Ab Usk The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 2018, Temperature Control Unit Tool Temp TT-181 Stock No.: 503645 Machine/Device Type: Temperature Control Unit Godpfjx A Swkex Ab Usuk Manufacturer: Tool Temp Model: TT-181 Year of Manufacture: 2018 Max. Operating Temperature: 150 °C Oil Max. Operating Temperature: 90 °C Water Heating Capacity: 9 kW Water / 3 kW Oil Circulation Medium: Water or Oil

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 7,500 kN, screw diameter: 80 mm, displacement volume: 2,262 cm³, Clamping force 7500 kN Distance between tie bars (h x v) 1110 x 960 mm Mould opening stroke 1400 / 900 mm Mould height min 450 / 1150 mm Max. daylight 2050 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 80 mm Ls/D ratio 24.8 Injection pressure 2200 bar Stroke volume 2262 ccm Shot weight (PS) 2058 gr. Screw speed 145 1/min Plasticising rate max. 71 g/s Guedpfxex Hx Sfo Ab Usk Electric and Hydraulic Equipment: Nominal capacity of pump motor 83 kW Installed heating capacity 50 kW Reservoir capacity 950 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,00 x 3,10 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503642 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of Manufacture: 2018 Technical Data for plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50: - Circulation medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy Guedpfox A Swdsx Ab Uok - Cooling capacity: 70 kW at a temperature difference of 80 K between tool inlet and cooling water; minimum pressure difference in cooling water circuit: 3 bar - Pump: Bronze submersible pump, Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Microprocessor controller, self-optimizing SBC - with digital display of setpoint and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault signal • Acoustic alarm buzzer for alerts • Operating hours counter • Heating control via Solid State Relay (SSR) • Leak monitoring • Leak stop mode (suction operation) • Extraction function for tool change • Manual fill option • Dirt filter • Unit mounted on rubberized castors • Connections: Tool hose connector G 1/2" (14 mm), Cooling water hose connector G3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulation medium: Water

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 7,500 kN, screw diameter: 80 mm, displacement volume: 2,262 cm³, Clamping force 7500 kN Distance between tie bars (h x v) 1110 x 960 mm Gsdpfsx Hx Ndex Ab Usuk Mould opening stroke 1400 / 900 mm Mould height min 450 / 1150 mm Max. daylight 2050 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 80 mm Ls/D ratio 24.8 Injection pressure 2200 bar Stroke volume 2262 ccm Shot weight (PS) 2058 gr. Screw speed 145 1/min Plasticising rate max. 71 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 83 kW Installed heating capacity 50 kW Reservoir capacity 950 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,00 x 3,10 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Year of construction: 2017, condition: good (used), Temperature Control Unit Tool Temp TT-181 Stock No.: 503648 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Model: TT-181 Year of manufacture: 2017 Gusdpox A Sv Tsfx Ab Uek Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: used, Year of construction: 2007, operating hours: 68,000 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 30 mm, displacement volume: 113 cm³, Clamping force 600 kN Mould opening stroke 335 mm Hydraulic ejector - stroke 105 mm Ejector force 19,1 kN Injection unit: Gujdpfx Ajx Hxb Heb Uok Screw diameter 30 mm Injection pressure 2152 bar Stroke volume 113 ccm Shot weight (PS) 102 gr. Injection rate 111 ccm/s Screw speed 400 1/min Nozzle pressure 50,3 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 15 kW Dimensions and weights: Dimensions of the machine ca. 3,00 x 2,00 x 3,20 m Total machine weight 6800 kg Accessories: - Anti vibration pads - Antivibration pads - 4-fold water flower

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Gsdpfx Abox A Svto Uouk Stock no.: 503636 Machine type/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulation medium: Water

Condition: ready for operation (used), Year of construction: 2020, operating hours: 10,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, Clamping force 9000 kN Distance between tie bars (h x v) 1180 x 1000 mm Mould opening stroke 1600 / 1000 mm Mould height min 500 / 1400 mm Max. daylight 2400 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 100 mm Ls/D ratio 22 Injection pressure 1800 bar Stroke volume 3691 ccm Shot weight (PS) 3359 gr. Screw speed 135 1/min Plasticising rate max. 793 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 85 kW Installed heating capacity 71 kW Reservoir capacity 780 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,21 x 2,88 m Total machine weight 38000 kg Accessories: - Anti vibration pads - 4 x 8-fold water flower Additional Options: - 2 x Air valves - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 1 x pneum. Core pull on movable plate Guodpfxoxcakro Ab Ujk - 1 x pneum. Core pull on fix plate - Robot interface according to Euromap 67