Year of construction: 2017, condition: good (used), Temperature Control Unit Tool Temp TT-181 Stock No.: 503648 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Model: TT-181 Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil Guodpfx Aex A Sv Tob Uok

Condition: ready for operation (used), Year of construction: 2020, operating hours: 10,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 100 mm, displacement volume: 3,691 cm³, Clamping force 9000 kN Distance between tie bars (h x v) 1180 x 1000 mm Mould opening stroke 1600 / 1000 mm Mould height min 500 / 1400 mm Max. daylight 2400 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 100 mm Gjdpjxcakrefx Ab Ueuk Ls/D ratio 22 Injection pressure 1800 bar Stroke volume 3691 ccm Shot weight (PS) 3359 gr. Screw speed 135 1/min Plasticising rate max. 793 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 85 kW Installed heating capacity 71 kW Reservoir capacity 780 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,21 x 2,88 m Total machine weight 38000 kg Accessories: - Anti vibration pads - 4 x 8-fold water flower Additional Options: - 2 x Air valves - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 1 x pneum. Core pull on movable plate - 1 x pneum. Core pull on fix plate - Robot interface according to Euromap 67

Year of construction: 2017, condition: excellent (used), Category: Twin-screw extruder Number: DE27686 Manufacturer: Berstorff Gusdex A Evaspfx Ab Uek Type: ZE 25 Year of manufacture: 2017 Capacity: 10 – 50 kg/h (depending on material) Screw diameter: 2 x Ø 25.1 mm L/D: 47:1 Motor: 14.5 kW Control: Siemens Details: Co-rotating, segmented screws and barrels, degassing, vacuum pump, 1x side feeder The laboratory extruder is in excellent condition and can be inspected at any time at our premises in Haan/Düsseldorf. Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry – we have suitable options for almost every budget in our portfolio.

Year of construction: 2017, condition: used, machine/vehicle number: 21700430, Clamping force: 1,034 kN, heating plate dimensions: 700x500 mm, injection pressure: 1,500/2,000 bar, injection volume: 400 cm³, lightly used, the system must be professionally disconnected from the power supply. Guedpfx Asx Akh Ueb Uok

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 258676, clamping force: 3,800 kN, screw diameter: 450 mm, injection pressure: 2,400 bar, The E-VICTORY 765H/170W/400 COMBI, manufactured , is a high-performance injection molding machine designed for precision and efficiency in industrial applications. This versatile machine is equipped with dual plasticizing units, offering screw diameters ranging from 22 mm to 55 mm, and a maximum injection capacity of up to 475 cm³. The machine operates with a screw speed of up to 400 rpm and a torque of 900 Nm, ensuring rapid and consistent material processing. The E-VICTORY model is engineered to handle a variety of materials, including GPPS, HDPE, and PP, with specific recovery rates tailored to each material type. The clamping unit of the E-VICTORY 765H/170W/400 COMBI provides a robust clamping force of 4000 kN, with a maximum platen distance of 1500 mm and a minimum mold height of 500 mm. The machine's wide platen size of 1300 mm x 1100 mm accommodates large molds, with a total mold weight capacity of 6000 kg. The injection unit features a nozzle stroke of 400 mm and a 67 kN, ensuring precise injection control. The machine's dry cycle time is optimized at 3 seconds, enhancing production efficiency. Constructed with high-quality materials and advanced engineering, the E-VICTORY 765H/170W/400 COMBI is designed for durability and reliability. It includes six to seven heating zones with a total power consumption of 185 kW, and a cooling power of 7.40 kW, ensuring optimal thermal management. The machine is compliant with industry standards, offering a comprehensive solution for manufacturers seeking high precision and productivity in injection molding operations. With its advanced features and technical advantages, this machine is ideal for applications in automotive, consumer goods, and medical device manufacturing. Gsdpfx Aex E T Uleb Ujuk

Condition: used, Year of construction: 2007, functionality: fully functional, Four granulate mills by Moretto are for sale, the price is per unit! The blades are armored/hard-faced, see pictures. Feed opening: 200 mm x 240 mm. The mill processes 30 kg per hour with a 6 mm screen. Type: GR 2020 Guodsxpt Tmepfx Ab Uek Knife mill: 3 units Screen: 6 mm Power: 2.2 kW

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Gsdpox A Svtofx Ab Ueuk Stock no.: 503636 Machine type/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulation medium: Water

Year of construction: 2000, condition: ready for operation (used), Model: GEISS U8 (nominal size 1000 × 1500 mm) Sheet size: 1000 × 1500 mm (feed) Max forming area: approx 1460 × 960 mm (subject to verification) Draw depth: ~400 mm Working height: ~1140 mm Features: Closed-chamber vacuum forming machine; stepless adjustable clamp frame; integrated vacuum system; cooling fans with water-mist; window plate adjustment; suitable for sheet/roll feed. Guodpfxoxwp I Nj Ab Usk

Year of construction: 1997, condition: ready for operation (used), SICA SOCKETING MACHINE .1.T. 100-500 For KG-U PVC pipes, Pipe lengths: 0.5m, 1m, 2m, 5m, 6m Year of construction: 1997 1 socket per cycle Socket tools for: 250mm - 315mm - 400mm sewer pipe Gsdpfx Abovfynts Ujuk The socket machine is in good condition, ready for operation

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) Gjdpfx Ajubamvsb Ujuk - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350/1900 C2 Year of Manufacture: 2005 Clamping Force: 3,500 kN Mold Opening Force: 220 kN Moving Platen Drive Force: open: 105 kN close: 95 kN Mounting Plate (H x V): 1,060 x 1,095 mm Clear Span (H x V): 710 x 710 mm Mold Opening Stroke: 920 mm Minimum Mold Height: 380 mm Opening Width: 1,300 mm Ejector Stroke: 250 mm Ejector Force forward/backward: 95 / 48 kN Pump Motor: 75 kW Installed Heating Capacity: 30 kW Barrel Heating Zones: 6 Dry Cycle Rate: 1,550 1/h Oil Capacity: 720 ltr. Dimensions and Weight: Net Weight with Control Cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. Mold Weight: 4,780 kg Injection Unit: Shot Capacity: 1900 Screw Diameter: 70 mm Injection Pressure: 1,778 bar Gjdpfx Abjxu Uvaj Uouk Stroke Volume: 1,047 cm3 Shot Weight for PS: 953 g Injection Flow Rate: 527 cm3/s Screw Speed Standard / Option: 285/349 rpm Screw Speed Standard or Level 1: 95 PS Screw Speed Option or Level 2: 117 PS Nozzle Contact Force: 82 kN Fully Hydraulic 2-Platen Clamping System PV Control for Injection Unit MC4 32-bit Microprocessor Control Integrated Operator Panel with TFT Color Display and 3.5-inch Floppy Disk Drive for Data Backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with shut-off valve and open nozzle Nozzle Radius: 15.00 mm Nozzle Bore: 6.00 mm 101225

Condition: used, Year of construction: 1998, functionality: fully functional, 1.0 pc. Mill for plastic material size reduction Gujdpfox H Aihsx Ab Uek Manufacturer: RAPID Model: 1521 Year of manufacture: 1998 Feed opening: 300 x 400 mm Rotor diameter: 250 mm

Condition: used, Position consists of: (1) Agitator Gsdpfx Abex E T S Ro Ujuk

Condition: good (used), Year of construction: 1999, operating hours: 17,620 h, Brand: Collin Lab & Pilot Solutions GmbH Extruder model: E 30 M Low Boy Screw type: Single screw Screw Ø: 30 mm L/D ratio: 25 mm Operating hours: 17,620 h Year of manufacture: 1999 Gujdpfoxx Tnpex Ab Usk

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 18.8 kW (25.56 HP), RegloChill RC2E 20 warehouse no.: 503608 type / Gjdpsxz Dt Iefx Ab Ujuk device: chiller manufacturer: RegloChill type: RC2E 20 year of construction: 2016 - Ecological refrigerant R407C - High efficiency rotating Scroll motor compressor groups - Molecular sieves dehydrating filter - Liquid level sight glass - High efficiency copper tube aluminum finned condenser - Solenoid valve - Safety pressure switches for high and low gas pressure - Copper evaporator, with high efficiency water-gas exchange stainless steel plates connection power: 12 A cooling medium: R407C cooling capacity: 18,8 kW voltage: 400 V - 50 Hz

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from clean room production (pharmacy) - with turntable 820 mm - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - Protective housing/ protective cage - Horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional The machine can be inspected under power by arrangement Technical data Manufacturer Engel Type V 330H/80V/130 Combi Serial number 162036 Year of manufacture 2006 Operating hours 33107 h Dimensions L/W/H see drawing Weight 10600 kg Functionality full Condition excellent Gusdpfx Abeub Umqs Usk Special Control unit CC 200 Screw ⌀ 25 / 22 mm Injection weight 72/ 35 gr. Injection pressure 2391/ 2066 bar Injection volume 79 / 38 ccm Clamping force 1300 kN/ 130 to. Tie bar spacing: tie barless Ejector stroke/force 61 kN/ 100 mm Hydraulic clamping unit Motor power follows Heating power follows Total output follows The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras Turntable (820 mm diameter) Geku Robot SR 500 ST Protective housing / protective cage CC 200 German English language GEKU Robot details SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing - On request - Hire purchase option Price on request

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, Injection Unit Screw diameter 25 mm Clamping Unit Clamping force 100t Gsdpfxex D Rcuo Ab Uouk This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 1998, functionality: fully functional, 1.0 pc. Mill for plastic material size reduction Gsdpox H Achsfx Ab Uouk Manufacturer: RAPID Model: 1521 Year of manufacture: 1998 Feed opening: 300 x 400 mm Rotor diameter: 250 mm

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Adjustable heating zones 5 Nozzle pressure 110 kN Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Max open daylight 1380 mm Mould height min 330 mm Mould height max 710 mm Ejector stroke 200 mm Ejector force for / back 81 kN Guodpfx Abex D Nwqo Uok Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2001, functionality: fully functional, 1.0 pc. Mill for plastic shredding Gsdpfx Asxvq Uueb Usuk Manufacturer: RAPID Model: 1521 Year of manufacture: 2001 Feed opening: 300 x 400 mm Rotor diameter: 250 mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,836 h, Injection Unit Screw diameter 52 mm Clamping Unit Clamping force 220 This FANUC Roboshot S220iA was manufactured in 2018. It's an electrical injection moulding machine featuring a clamping force of 220 tons and a tiebar spacing of 650x650 mm. It includes a single platen and a screw diameter of 52 mm. Consider the opportunity to buy this FANUC Roboshot S220iA electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Gujdpfox D Rkxex Ab Uek

Condition: ready for operation (used), Year of construction: 2019, operating hours: 20,000 h, General Data Machine weight 6500 kg Control Unit Brand ENGEL Main Drive Spindle motor power 92 kW Injection Unit Screw diameter 60 mm Stroke volume 315 mm Injection pressure 2400 bar Screw speed 220 min-1 Nozzle pressure 2400 bar Clamping Unit Clamping force 6500 kN Opening stroke 1400 mm Distance between bars 1100x960 mm Mould height min 350 mm Mould height max 850 mm Size of mold platens 1510x1440 mm Ejector stroke 250 mm Ejector force for / back 95 kN Guodpfxox D Raye Ab Uok Additional Equipment Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, General Data Measurements width 2200 mm Measurements depth 7200 mm Measurements height 2400 mm Machine weight 17700 kg Gjdpfx Asx D N Sbjb Ujuk Injection Unit Screw diameter 60 mm Shot weight 723 g/hp max Injection pressure 2500 bar max Clamping Unit Clamping force 3200 kN Opening stroke 700 mm max Distance between bars 720 mm x 720 mm Mould height min 300 mm Size of mold platens 1040 mm x 1040 mm Additional Equipment The Wittmann robot is not included Conveyor belt is included, protective housing only for the electrical components No other peripherals are included. This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,109 h, General Data Machine weight 4400 kg Control Unit Brand FANUC Injection Unit Screw diameter 36mm Clamping Unit Clamping force 150-180t This FANUC Roboshot S150iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. Gusdpfxsx D Rzqs Ab Uok Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of axis 3 Clamping Unit Clamping force 1300 / 1600 / 2000 kN Additional Equipment Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Godsx D E Dyspfx Ab Ueuk Application Types Injection Moulding