Condition: good (used), Year of construction: 2007, operating hours: 30,056 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 1.86 bar, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 770 mm, plate width: 745 mm, installation height: 300 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 7,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, warehouse no.: 503471 manufacturer: KRAUSS MAFFEI type: KM 100-380 CX controller: MC5 year of construction: 2007 operation hours: 30056 h clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 745 x 770 mm min. mould height: 300 mm Lredpfx Asxf Hyljh Esu max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 40 mm swept volume: 201 ccm injection pressure: 1860 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine with material hopper machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 4.7m x 1.7m x 2.25m total weight: 7800KG

Year of construction: 2020, condition: new, Feeding for granulate and powder Lsdpfxsfmn Ufe Ah Ejru

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine is a few years old, but has rarely been used. It can be inspected at our location in Weesp. Lredsxg Hxwepfx Ah Eou

Condition: used, functionality: fully functional, Machine DU 1500 x 1000 x 620 T7 No. 98 15254 Plate size: 1000 x 800 mm, Draw depth: 620 mm Year of manufacture: 1998 Rated current: 238 A Total connected load: 164.5 kW Control system: Siemens OP 37 Equipment: • Loading/unloading machine Ledpfx Asxmgvcsh Esru • 6 cooling fans • Upper punch • Film sag control • Motorized adjustable clamping frame • Flash emitter • Heating pyrometer • Cooling pyrometer

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 Lrodpfx Ahsxcw T Rj Eju - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: ready for operation (used), Year of construction: 2016, operating hours: 24,285 h, General Data Machine weight 4400 kg Control Unit Brand FANUC Injection Unit Screw diameter 36 mm Clamping Unit Clamping force 150-180 This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. Application Types Ledpoxllk Asfx Ah Eoru Injection Moulding

Condition: good (used), Year of construction: 2007, operating hours: 54,840 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 75 mm, clearance between the columns: 630 mm, displacement volume: 1,657 cm³, plate length: 940 mm, plate width: 940 mm, installation height: 2,400 mm, total length: 7,350 mm, total width: 1,800 mm, total height: 2,400 mm, overall weight: 16,000 kg, input frequency: 50 Hz, clear span: 1,250 mm, Equipment: documentation/manual, warehouse no.: 503221 manufacturer: BATTENFELD type: TM 270-3300 controller: UNILOG B4 year of construction: 2007 operation hours: 54840 h clamping force: 2700 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 940 x 940 mm min. mould height: 250 mm max. mould height: 650 mm max. open daylight: 1250 mm opening stroke: 600 mm screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2087 bar equipment included: screen text multilanguage core pulling hydraulically 1x Ljdpfjxf Hx Uox Ah Eeru air valve 1x machine with material hopper machine incl. water flow regulator Machine without Handling machine without hopper loader Anti vibration mounts interface EUROMAP 67 interface USB measures of machine l x w x h: 7.35m x 1.8m x 2.4m total weight: 16000KG

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. Lredpfxohgq Ahs Ah Eou We are available for any further questions. Commissioning and testing available upon request. In stock

Condition: ready for operation (used), Year of construction: 2019, Injection Unit Screw diameter 35 mm Lrsdpfx Ahsxllnzs Eju Clamping Unit Clamping force 150 t This Arburg 520 H was manufactured in 2019. It features a clamping force of 150 tons, tiebar spacing of 520x520 mm, and a screw diameter of 35 mm. It includes a selecting unit and a single platen design. Consider the opportunity to buy this Arburg 520 H hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2004, operating hours: 83,909 h, functionality: fully functional, clamping force: 700 kN, screw diameter: 25 mm, displacement volume: 69 cm³, injection pressure: 2,090 bar, warehouse no.: 503474 manufacturer: ENGEL type: VICTORY 200-70 Tech controller: CC100 year of construction: 2004 operation hours: 83909 h Ledpfxexf Hw Ro Ah Eoru clamping force: 700 kN size of mould plates h x v: 670 x 600 mm min. mould height: 144 mm max. open daylight: 594 mm opening stroke: 450 mm screw diameter: 25 mm swept volume: 69 ccm injection pressure: 2090 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 1x air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts Schuko-socket 10A measures of machine l x w x h: 4m x 1.45m x 2m total weight: 5200KG

Condition: good (used), Manufacturer: "Alpina" Cutting mill, suitable for secondary shredding. Lodpfxstw Sf Sj Ah Eeru Drive: 15 kW Fully functional, with control. - Optionally with blower and suction to the cyclone. Suitable conveyor belt in stock.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,941 h, Control Unit Brand FANUC Injection Unit Screw diameter 36mm Clamping Unit Clamping force 220 Control Unit Brand FANUC Injection Unit Screw diameter 36mm Clamping Unit Clamping force 220 Lrsdpfx Ahoxllnue Eju This FANUC Roboshot S220iA was manufactured in 2019. It features a clamping force of 220 tons, tiebar spacing of 650x650 mm, and a screw diameter of 36 mm. It includes a selecting unit and a single platen design. If you are looking to get high quality injection molding capabilities consider the FANUC Roboshot S220iA machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2005, operating hours: 76,679 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,450 bar, total length: 4,050 mm, total width: 1,930 mm, total height: 2,100 mm, overall weight: 5,200 kg, Equipment: documentation/manual, warehouse no.: 503561 manufacturer: ENGEL type: VICTORY 200-80 Tech controller: CC 100 year of construction: 2005 operation hours: 76988 h clamping force: 800 kN size of mould plates h x v: 670 x 600 mm min. mould height: 250 mm Lsdpfx Ahoxf Hwqe Eoru max. open daylight: 700 mm opening stroke: 450 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included: screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A technical data robot-system handling type: Linearhandling manufacture: Engel controller: ER-HLI 31 VC year of construction: 2005 handling weight: 2 kg screen-text: deutsch total weight: 250 kg measures of machine l x w x h: 4.05m x 1.93m x 2.2m total weight: 5200KG

Condition: ready for operation (used), Year of construction: 2014, operating hours: 18,612 h, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 150 t This Arburg 520 H 1500-400 was manufactured in 2014. It features a closing force of 150 tons and a screw diameter of 35mm, suitable for precision hydraulic injection moulding. Operating on 400V, it has a total connected load of 89 kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. Ledexllkvspfx Ah Esru Application Types Injection Moulding

Condition: good (used), Year of construction: 2010, operating hours: 72,154 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, warehouse no.: 503576 manufacturer: ARBURG type: Allrounder 900 T 800-150 controller: year of construction: 2010 operation hours: 72154 h clamping force: 800 kN distance between tie-bars h x v: 900 x 900 mm min. mould height: 250 mm max. open daylight: 550 mm opening stroke: 300 mm round table diameter: 900 mm screw diameter: 25 mm swept volume: 54 ccm Ljdsxf Hvtjpfx Ah Esru injection pressure: 2500 bar equipment included: screen text german air valve 1x machine with rotary index table machine incl. water flow regulator Anti vibration mounts Operation Data Acquisition measures of machine l x w x h: 3.8m x 1.85m x 2.15m total weight: 5000KG

Condition: ready for operation (used), Year of construction: 2014, operating hours: 51,435 h, General Data Machine weight 18000 kg Control Unit Brand FANUC Injection Unit Screw diameter 40 mm Clamping Unit Ledpfxexlll Ts Ah Eoru Clamping force 150-180t This FANUC Roboshot S150iA was manufactured in 2014. It features a closing force of 150-180 tons and a screw diameter of 40mm. Ideal for precision electrical injection molding, it operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Contact us for more information about this machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2007, operating hours: 47,792 h, functionality: fully functional, clamping force: 900 kN, warehouse no.: 503504 manufacturer: ENGEL type: VICTORY 330H-80V-90 combi Lsdsxf Hbcepfx Ah Ejru controller: CC200 year of construction: 2007 operation hours: 47791 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 243 mm max. open daylight: 743 mm opening stroke: 500 mm round table diameter: 700 mm centering diameter of fixed platen: 125 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar equipment included screen text german screen text english core pulling hydraulically 1x machine with rotary index table machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety Schuko-socket 10A mould heating 8x Injection moulding machine for two components measures of machine l x w x h: 4.5m x 1.45m x 2.7m total weight: 9300KG

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand FANUC Injection Unit Screw diameter 52 mm Clamping Unit Clamping force 350 This FANUC Roboshot S300iA was manufactured in 2018. It features a clamping force of 350 tons, tiebar spacing of 810 x 710 mm, and a screw diameter of 52 mm. Ideal for precision electrical injection molding. Contact us for more information. Ljdjxllnhepfx Ah Ejru Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2009, operating hours: 70,171 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 38 mm, displacement volume: 38 cm³, injection pressure: 2.06 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,400 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 6,700 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Ledpfxoxf E Unj Ah Eeru Schuko-socket 10A mould heating 4x measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG

Condition: ready for operation (used), Year of construction: 2010, Injection Unit Screw diameter 25 mm Clamping Unit Ljdpfxexlln Is Ah Eeru Clamping force 80 t This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 1998, functionality: fully functional, warehouse no.: 503460 manufacturer: ARBURG type: Allrounder 1200 TS 400-150 controller: year of construction: 1998 clamping force: 400 kN min. mould height: 250 mm max. open daylight: 550 mm opening stroke: 300 mm round table diameter: 1200 mm screw diameter: 25 mm swept volume: 54 ccm Ljdpfx Ahsxf E Syo Esru injection pressure: 2500 bar equipment included: screen text german CEE-socket 16A rotary table Anti vibration mounts Schuko-socket 10A measures of machine l x w x h: 4.1m x 1.75m x 2.6m total weight: 8000KG

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 19300 kg Additional Equipment Oscillating Mounts for Machine Mounting / Hydraulic Screw Anti-Rotation Lock / Hydraulic Screw Drive with Standard Speed / Pneumatic and Hydraulic Cascade Valves for Hot (Cold) Channel Needle Valve / Service Unit Combination for Compressed Air Preparation / Nozzle and Ejector Chamber Control and Monitoring Systems / Support for Clamping Unit on Foundation / Widening of Mold Clamping Platens / Manual Ejector Coupling System / Chrome-Plated Tie Bars / Internal Oil Filtration in the Bypass Flow This Krauss Maffei 300-1400 CX MC6 was manufactured in 2020. It features a hydraulic screw drive, oscillating mounts for stability, and a comprehensive service unit for compressed air preparation. The machine supports high weight loads with its robust clamping unit and has chrome-plated tie bars for durability. Consider the opportunity to buy this Krauss Maffei 300-1400 CX MC6 plastic processing machine. Contact us for more information about this machine. Application Types Other Plastic Processing Machinery Ledpfoxlll Hox Ah Esru

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 280 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,065 bar, total length: 3,200 mm, total width: 1,350 mm, total height: 1,850 mm, overall weight: 2,900 kg, Equipment: documentation/manual, warehouse no.: 503562 manufacturer: ENGEL type: Victory 200-28 Tech controller: CC200 year of construction: 2011 clamping force: 280 kN size of mould plates h x v: 500 x 400 mm min. mould height: 150 mm max. open daylight: 550 mm opening stroke: 400 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar Lrsdjxf E R Nepfx Ah Esu equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor LxW: 2800mm x 350mm Discharge height: 950mm Speed: 9m/min machine incl. Handling machine incl. water flow regulator Anti vibration mounts interface for ejector plates safety interface for temperature control units Schuko-socket 10A selection unit measures of machine l x w x h: 4.4m x 1.9m x 2.1m total weight: 2900KG technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 electric cabinet dimensions: 1,00m x 0,35m x 0,64m

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,501 h, General Data Machine weight 4400 kg Control Unit Lrjdpfx Aexllkpeh Eeu Brand FANUC Injection Unit Screw diameter 16/20 mm Clamping Unit Clamping force 50 t This FANUC Roboshot S100iA was manufactured in 2016. It's an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 16/20mm. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, injection pressure: 1,640 bar, mold height (min.): 500 mm, ejector force: 180 N, ejector stroke: 300 mm, opening stroke: 1,600 mm, plate width: 1,550 mm, plate height: 1,470 mm, installation height: 1,100 mm, total length: 1,181 mm, total width: 3,200 mm, total height: 2,900 mm, overall weight: 51,000 kg, Equipment: documentation/manual, warehouse no.: 503583 manufacturer: ENGEL type: ES 16050-800 DUO controller: CC 100 year of construction: 2007 operation hours: 91691 h clamping force: 8000 kN distance between tie-bars h x v: 1170 x 1000 mm size of mould plates h x v: 1550 x 1470 mm min. mould height: 500 mm max. mould height: 1100 mm max. open daylight: 2100 mm opening stroke: 1600 mm screw diameter: 135 mm swept volume: 8870 ccm injection pressure: 1640 bar measures of machine l x w x h: 11.81m x 3.2m x 2.9m total weight: 51000KG technical data robot-system handling type: Linear manufacture: ENGEL controller: ERC 64/1-F year of construction: 2007 handling weight: 25 kg X axis: 1300 mm Y axis: 2200 mm Lrodpfoxf E Nljx Ah Eeu Z axis: 4760 mm