Condition: used, Nieużywany rozbrylacz/kalibrator Gericke model 450x680. Wykonanie ze stali kwasoodpornej. Bdodpfx Aozbuchebuoi Napęd silnikiem el. 5.5 kW, 1445 obr/min przez reduktor. i= 26.04/1. Robocze obroty rotora ok 55,49 obr/min.

Condition: excellent (used), Year of construction: 2013, operating hours: 46,500 h, functionality: fully functional, clamping force: 130 kN, screw diameter: 37 mm, The Negri Bossi will looked after did low hours . The machine have full service history year of manufacture 2013 the machine have one single hydraulic core and on air eject Bdodpozcx Tmjfx Abusi

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Bjdpfsywx Hqox Abuedi Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 61,679 h, functionality: fully functional, machine/vehicle number: 7230-0182, clamping force: 500 kN, screw diameter: 22 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2013 • Machine no.: 7230-0182 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 22 mm • Control system: NC5 / CDIAS • PLC operating hours: approx. 61,679 h • Drive operating hours: approx. 56,166 h • Heater operating hours: approx. 57,914 h • Total cycles: approx. 11.9 million • incl. Geiger MiniServo 1.5 parts removal device In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2014. Bdsdpfx Aj Aggpasbuji Both machines feature extensive equipment, including electric ejectors and screw drives, active tool protection functions, process data acquisition, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we will gladly provide you with further information and images. Our asking price for the complete package consisting of both machines, including both Geiger parts removal devices, is €55,000 net, ex warehouse.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Bsdpfx Absz Ib R Ieujdi Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Specification: Manufacturer: S.A. Central Adams Model: MTE 84 EXS0-D Heavy-duty industrial construction Hydraulic press and pump assembly Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Located in Edenbridge, Kent, TN8 6HL, England Important Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. Bdedpfx Abjz Nkuaeuoi This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 7230-0232, clamping force: 500 kN, screw diameter: 25 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2014 • Machine no.: 7230-0232 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 25 mm • Control system: NC5 / CDIAS • including removal device Geiger MiniServo 1.5 • Approximately 12 million cycles In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2013. Both machines have extensive features, including electric ejectors and screw drives, active tool protection functions, process data recording, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we would be happy to provide you with further information and images. Bdodpfx Abs Aggumjuei Our asking price for the complete package, including both machines and both Geiger removal devices, is €55,000 net, ex works.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Horizontal column spacing: 1,025 mm Vertical column spacing: 930 mm Tool height: min. 450 mm Tool height: max. 950 mm Opening stroke: max. 1,800 mm Injection Unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of the pump motor: 55 kW Heating capacity: 62 kW Bedpfx Aj Afw Hysbuedi Dimensions & Weight Dimensions (L x W x H): approx. 8,300 x 2,500 x 2,330 mm Machine weight: approx. 33,000 kg

Condition: excellent (used), Year of construction: 2003, operating hours: 62,490 h, functionality: fully functional, clamping force: 160 kN, screw diameter: 45 mm, injection weight: 330 g, The Negri Bossi 160T in very good condition have full service history from Negri Bossi distance between tie bars 510X450 . Robot interface and two Hydraulic cores . Bdodpfx Ajzd U Diebuoi

Condition: excellent (used), Year of construction: 2007, operating hours: 56,800 h, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, injection weight: 109 g, The Negri Bossi 55T in very good condition full service history still in production . The machine have one hydraulic core and one single air eject year 2007 . Bodpfxezcwv Ts Abujdi

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Bsdpfx Ao Ahgrasbuedi Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage height: max. 100 - 200 mm Passage width: max. 450 mm Effective contact length: 2400 mm Haul-off speed: stage 1: 0.5 - 4.0 m/min., stage 2: 1.0 - 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: used, Year of construction: 2017, overall weight: 8,850 kg, Model 570 A 2000-400 Year of manufacture: 03/2017 Net weight according to the technical data sheet for the basic configuration: 8,850 kg with the following peripherals: - KUKA robot KR 16-2, year of manufacture 2017, with control panel - KUKA robot KR 10 R1100 sixx, year of manufacture 2017, with control panel - FARRAGTECH Card 40S compressed air granulator dryer - NZME temperature control unit station - Conveyor belt - Machine stairs - Machine documentation as shown - Enclosure as shown, without any further accessories or items depicted in the background, not tested for function or completeness Bdjdpe Ahkh Ajfx Abuoi This ARBURG 570 A 2000-400 injection molding machine will be auctioned online in our industrial auction / machine auction "Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks and various". You can find this and many other items from the areas of temperature control units, operational equipment and storage technology on our platform.

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Bdodpfx Aowkkpqebusi Machine picture shown is for example only. Machine has not been installed.

Year of construction: 1986, condition: good (used), functionality: fully functional, machine/vehicle number: 540, SANDT 540 – 50 Ton Hydraulic Double-Column Press – 1350 × 600 mm Good quality German-built SANDT 50-ton hydraulic press, now available from our premises in Kent, England. A substantial industrial machine offering a large 1,350 × 600 mm working area, approximately 500 mm maximum stroke and 680 mm installation height. Suitable for a wide range of industrial cutting, die-cutting, punching, forming and manufacturing operations. Specification: 50-tonne press force 1,350 mm column width 1,350 × 600 mm table 1,350 × 600 mm ram Approx. 500 mm max. stroke Approx. 680 mm installation height 400 V Safety light curtain Separate hydraulic power pack Separate electrical cabinet Approx. 3,000 kg Bdedpfez Icrtox Abuei Approx. dimensions: 3,000 × 1,200 × 2,800 mm Manufacturer: SANDT Model: 540 Year: 1986 Machine No.: 808673-72951 Price: £5,000 or best offer Machine can be inspected in Kent, England. Buyer to arrange collection/transport. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks,

Condition: ready for operation (used), We offer this ready for use B.I.P. Engineering BIPEL 150 T Rubber Vulcanising Press. Bjdpjz D Igbofx Abujdi It is currently installed so can be seen running in situation. We have attached a data sheet which shows the key Dimensions. Type: 150 FAOL Serial Number: 8620 Voltage: 440 V Phase: 3 Frequency: 50 Hz Apparent power: 100 kVA Price in GBP = £16,000 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bdodpfx Abo Afw Dreuei Clamping unit Clamping force: 4,000 kN Platen length: 1,300 mm Platen width: 1,080 mm Tool height: min. 350 mm Mold opening: max. 1,300 mm Injection unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Rated power of the pump motor: 45 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 2,250 x 2,200 mm Machine weight: approx. 5,600 kg

Condition: used, Year of construction: 2003, operating hours: 6,659 h, functionality: fully functional, KraussMaffei injection molding machine KM 300-1400 C2, manufactured in 2003, with extensive peripherals and material supply system. Manufacturer: KraussMaffei Bedpfx Ao Afaqbebuedi Machine type: KM 300-1400 C2 Designation on control panel: KM 300-1400 C2P International size designation: KM 1400 C2/300 Machine type: Injection molding machine Year of manufacture: 2003 Machine no.: 61004124 Machine weight: 14,370 kg Operating hours according to display: 66,598:20 h Control system: KraussMaffei Material supply / dosing: Colortronic UB95 Temperature control / cooling unit: Frigel Microgel RCM80/6HP Year of manufacture Frigel: 2013 Voltage Frigel: 400 V Auxiliary voltage Frigel: 110 V Frequency Frigel: 50 Hz Maximum current Frigel: 17 A Refrigerant: R407C Refrigerant filling quantity: 2.4 kg Temperature range Frigel: -5 to +90 °C Weight Frigel: 200 kg Additional peripherals: Second Frigel Microgel unit, material conveying system, discharge conveyor belt and rotary table available Available from APRIL 2027

Condition: repair required (used), functionality: unexamined, -The machine has been out of service since 2010. It was replaced by another machine in our production facility. Bjdo Afwxgspfx Abuodi -The last manufacturer inspection was carried out in 2011. -It is an as-is machine, suitable for refurbishment, and consists of a mixer, drive unit, and gearbox.

Condition: used, functionality: fully functional, Cooling fans for extruder Manufacturer: Karl Kein Ventilatorenbau Condition: used and tested different models TOTAL PRICE: EUR 500,00 Bdodpfxj Af Ip Io Abuoi

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: Bjdpfx Asz Iww Rebuedi • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, Year of construction: 1980, operating hours: 12,345,678 h, functionality: fully functional, total height: 3,400 mm, input current: 32 A, total length: 2,200 mm, total width: 900 mm, overall weight: 6,000 kg, power: 32 kW (43.51 HP), input voltage: 380 V, pressing force: 200 t, clearance between the columns: 800 mm, oil tank capacity: 400 l, stroke length: 500 mm, table length: 700 mm, table height: 980 mm, table width: 800 mm, 200-ton press from Rapp&Seidt, high-speed model, with core lifting device for intermediate plates and external hydraulic unit. Heated platens (drawing cushions) with electric heating, 25 amps each, top and bottom. Platen size 550x550 mm, central ejector. The machine operates smoothly and maintains pressure. Very little oil leakage. The machine is available immediately. Bdjds Agvxbopfx Abuji

Condition: reconditioned (used), Year of construction: 2004, machine/vehicle number: 63237, clamping force: 350 kN, total length: 2,759 mm, total width: 886 mm, total height: 1,900 mm, overall weight: 1,310 kg, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 35M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Bdsdez Armfepfx Abuji Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Year of construction: 2007, condition: used, CNC control system HEIDENHAIN iTNC 530 with handwheel, travel distances: X-axis approx. 1,500 mm, Y-axis approx. 2,400 mm, Z-axis approx. 800 mm, table dimensions (length x width x height) approx. 2,500 x 1,500 x 530 mm, maximum table load 500 kg, milling spindle power 4 kW, spindle speed 6,000 rpm, tool holder 78/8 flange, feed rate X, Y, and Z axes 20 m/min, axis acceleration 1.5 m/s², machine footprint 6,000 x 4,000 x 3,900 mm, total weight approx. 8,000 kg, NOTE: Fully functional condition, regular maintenance performed by the machine manufacturer! The machine is already located at a different site at Kartonstraße 2, D-88255 Baienfurt. Free loading FCA D-88255 Baienfurt. Bdodpfxe Af Nl He Abuei

Condition: used, Year of construction: 2011, operating hours: 11,591 h, functionality: fully functional, machine/vehicle number: B610, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,830 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 150 kg, number of injections: 897,476, power: 3 kW (4.08 HP), type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, For sale is a very well-maintained Cronoplast 6/10P injection molding machine from 2011. Bdsdpfsytgmvjx Abusi The machine was operated exclusively by a professional injection molder, regularly serviced, and is in excellent condition. Thanks to its extensive additional equipment, this system offers optimal conditions for efficient, precise, and stable production processes. Equipment & Highlights ✔ Selector valve – ensures clean part ejection and optimized part handling ✔ Ceramic heating elements – enable higher processing temperatures and energy-efficient heating ✔ Electric mold heater – provides precise mold temperature control ✔ Stable machine frame – ideal for operation and maintenance ✔ Air blow system – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Since you are buying directly from the machine owner, you save on dealer commission costs. We have other machines of this type in stock. The equipment is identical; operating hours may vary. Contact us, and we will offer you an attractive package price. Technical data – Cronoplast 6/10P Screw / Injection unit Technical data - Cronoplast 6/10P Plasticizing unit - Piston diameter 12 mm - Displacement volume 6 cm³ - Specific injection pressure 1830 bar Clamping unit - Clamping force 62.5 kN - Opening force 4 kN - Opening stroke 30-110 mm - Ejection force 5 kN - Ejection stroke 45 mm Dimensions: - Weight including frame approx. 350 kg - L x W x H: 116 cm x 80 cm x 198 cm The sale is made excluding any warranty and liability for defects.

Year of construction: 2021, condition: excellent (used), Weima wlk2000 refurbished by AMIS in 2021, Zerma GSE700/1400 2021 meant condition, used for PVC Bdedpfx Abez Imkaouji