Condition: used, functionality: fully functional, We have a used Ahlström edger available for sale. It is in full working condition and comes complete with a set of blades/cutters. Bedjxa Akpjpfx Afqolp

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Bsdpfjxw Ubnjx Afqelp

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Bedpfx Asxw Uf Tefqelp

Condition: reconditioned (used), B., VK26M (model series 1974) with motorized discharge table: - Main machine - Infeed table (driven) - Discharge table - Control cabinet Including infeed and discharge table, workshop inspected * - Debarking capacity: 10 cm - 61 cm diameter - 4 main separators - 4 cutting knives - Rotor speed = 235 RPM - Rotor opening = 65 cm - 30 kW motor, speed 1500/min - Speed: 17-42 m/min - 3 m or longer (wood length) Dimensions (without infeed and discharge table) L = 9840 mm Infeed table: 3540 mm x 1000 mm x 1900 mm Blsdpefn Iu Isfx Afqsp Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Discharge table (motorized table): 3170 mm x 1000 mm x 1300 mm RENOVATION: Pos 1: 1 unit: Machine disassembly, washing, sandblasting, priming, and painting, repair, assembly Pos 2: 1 unit: Material - knife axle bearings on the rotor, new bearings and seals (if required) Pos 3: 5 units: Miscellaneous material: V-belt for rotor drive Pos 4: 1 unit: Gear oil Pos 5: 1 unit: Material: Abrasives + paints Pos 6: 4 units: Valonkone peeling knives Pos 7: 4 units: Valonkone pre-separators Pos 8: 1 unit: Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW geared motor with start for 4 kW geared motor input with start for 4 kW geared motor output Main starter Emergency STOP

Condition: new, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008-176, The Cambio 500 (Söderhamn Eriksson) is a debarker for small logs up to 495 mm (20 inches) in diameter. It operates at feed speeds of up to 120 m/min (393 ft/min). Thanks to its reliability, minimal maintenance requirements, and ultra-low operating costs, the Cambio 500 is the first choice for leading wood processing companies worldwide. Its triangular feed system and carbide-tipped debarking tools, powered by compressed air, are among the key features that ensure superior debarking results. Complete with a feed conveyor. The machine was not in operation and was in storage. Blodpeyl Aqhefx Afqop

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16041309, cutting length (max.): 4,800 mm, cutting height (max.): 1,150 mm, roll diameter: 115 mm, saw drive: 30 W, input current: 56 A, input voltage: 400 V, Equipment: 3rd hydraulic function, WRAVOR WRC 1150 AC BAND SAWMILL FOR SALE Stationary WRAVOR WRC 1150 AC band sawmill with log infeed system. Year of manufacture: 2016 The machine is still in operation and can be inspected while running. Technical specifications: Capacity when processing oak logs, diameter 250–700 mm: approx. 18–20 m³ per 8-hour shift Total installed power: 66 kW Main drive motor: 30 kW 2 debarkers Saw blade dimensions: 140 × 8,190 mm Wheel diameter: 1,150 mm Wheel width: 115 mm Cutting optimization software The machine is currently installed and operational. Bljdpfey Hx I Tjx Afqep Please contact us for further information, photos, videos, price or to arrange an inspection.

Condition: ready for operation (used), functionality: fully functional, The following components of the machine have been renewed: Feed gearbox: overhauled in 2023 Rotor: factory-refurbished, installed in 2024 Hydraulic roller opening: installed in 2022 Extraction unit: newly installed in 2021 Bodjxr Ityopfx Afqelp Infeed table: year of manufacture 2021 TECHNICAL DETAILS Rotor: Air ten, 800 mm Max. log diameter: approx. 75 cm MACHINE DETAILS Overall length: 9,800 mm Wheelbase: 8,800 mm EQUIPMENT Spare parts package Note: An electrical control cabinet is not included in the offer. However, the seller can supply a new control cabinet for an additional charge.

Condition: used, Year of construction: 2000, functionality: fully functional, Trolley with belt for 1500 cm saw, log loading ramp, and 8 m board conveyor with retention. Saw motor 37 kW. Bsdpfx Afsxvpd Ijqelp

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH Bjdoxtwwkjpfx Afqslp 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: reconditioned (used), functionality: fully functional, The VK820 single-rotor machine is equipped with an 800 mm rotor and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Alternatively, according to a client's needs, the rotor can be changed to another one (480/620). Bledpfx Afjwfdi Heqop

Condition: excellent (used), functionality: fully functional, Robust Möhringer auxiliary wagon in steel construction. Reinforced. Can also be used as an auxiliary wagon for other clamping trolleys with a 900 mm gauge, such as Linck, Weiss, Mayerhofer, etc. Gauge: 900 mm. Wagon height: 420 mm. Tilting carriage with continuous chain, powered. Hydraulic carriage for round timber, hydraulically adjustable and tiltable. Feeding from both sides possible. Blsdpowv Rcuofx Afqjp Technically inspected.

Condition: good (used), cutting width 15-200 mm cutting height 210 mm minimum element length 1200 mm Bledpswm Srrjfx Afqsp main engine 15 kW feed engine 1.1 kW smooth feed speed regulation 5-26 m/min disc diameter 630 mm

Condition: good (used), Year of construction: 1998, functionality: fully functional, Canter Linea COSTA, model Prisma 30, with roller infeed for 6 m and roller outfeed left and right Blodpfxowt Uqqs Afqsp

Year of construction: 2008, condition: excellent (used), Sorting system for small-diameter wood and stakes Bedewqdc Ropfx Afqolp for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration.

Condition: ready for operation (used), Year of construction: 2013, For sale is a Baljer Zembrod OBX V-24 with up to 200m of rail. Bodswxndnopfx Afqolp

Condition: good (used), 2 pieces of frame stands. Oscillating shaft and overhung shaft. Blsdpjwwr Eaofx Afqsp 2 pieces of split lower frame rollers. Shafts and bearings for rollers. Guide bracket, etc.

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Bsdpswp E E Dofx Afqelp Söderhamn 447 infeed 240-12 chipper canters Block tilt and infeed 240-12 chipper canter Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Log deck 2 sections Step feeder Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner Bjdswp E Tnepfx Afqelp AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 AriVislanda VFW 600 L 2011 AriVislanda board separator 2006 Block tilt AriVislanda block infeed type Nils AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Bedsw S Eylspfx Afqolp

Condition: used, Small sawmill CTR550, year 2018, good condition, 4 kW, 3600 mm cutting length. Price changes reserved, errors, misprints and typesetting mistakes reserved. Blodewzzfqjpfx Afqsp

Condition: new, 26-HT-Wooddry365-SET Wood Drying Kit WoodDry 365 SET Our wood drying kit provides everything needed for rapid and effective wood drying. The set includes a high-performance WoodDry 365 automatic controller, a professional wood dehumidifier, two fans, two sensors, and a heater. The user-friendly operation ensures effortless handling and delivers outstanding drying results with minimal effort. CE compliant 100% Made in Austria (designed, manufactured, and quality-tested) Advantages and Features: - Complete Set: All essential components required for efficient, comprehensive wood drying are included. - Compact and Space-Saving Solution: All components are perfectly matched and require little space, making the system suitable even for smaller workshops or rooms. - Easy Operation: The intuitive WoodDry 365 controller is easy to use, suitable for both beginners and experienced users. - Optimal Drying: Thanks to the heating unit and two fans, air circulation is optimized for faster and more uniform wood drying. - Energy Efficient: The kit operates with high efficiency, ensuring low operating costs combined with excellent results. - Versatile Application: Ideal for drying wood for furniture production, woodworking, or other projects. Also suitable for use in small to medium-sized workshops. - Automatic WoodDry 365 Controller: The proprietary control unit fully manages the entire drying process. The operator only needs to specify the wood thickness, type, and desired final moisture content. The system automatically adjusts the drying process for optimum results and energy savings. - Robust and Durable: High-quality components guarantee a long service life and reliable performance over an extended period. - Combo Sensor: Specially developed for precise measurement of air humidity, wood moisture, and room temperature. - Suitable for most softwoods and hardwoods such as spruce, beech, ash, as well as exotic woods and firewood. Oak is not recommended due to its high tannin content—similar to other dehumidifier systems, its use is limited. - The standard set with one HT100 dehumidifier can process up to 9m² of wood. Technical Data: Controller Connection: 16A. Dehumidifier Rated Power Consumption: 1050W Airflow: 1100 m³/h Maximum Dehumidification Capacity: 100 liters / 24h Dimensions: 516 x 516 x 656 mm Weight: 48 kg Heater Heating Output: 9.0 kW Dimensions: 455 x 275 x 300 mm Air Output: 1,150 m³/h Fans High Airflow: 102 m³/min Air Velocity: 3.66 m/s Low Noise Operation: 64.1 dB(A) Power Supply: Mains operation, hard-wired power cable (230 V, 50 Hz) Dimensions: 52 x 53 x 18 cm (W x H x D) Power Cable Length: approx. 162 cm Compact Sensor Cable: 5 meter cable Bljdpjwzzg Isfx Afqep Measured Values: air humidity, wood moisture, temperature Optional Equipment: - 1x additional compact sensor with 10 meter cable - 1x additional HT100 dehumidifier – for drying up to 18m² of wood - 1x air damper with cable – for optimized drying

Condition: used, Frame Saw Esterer LSH Year of Manufacture: 1968 Clearance: 65 cm 500 mm stroke Oscillating frame Automatic overhang adjustment Hydraulic roller lifting With splitter wedge With drive motor With gear transmission With saw blades Bedew Dn S Aspfx Afqelp With hydraulic saw tensioner With suspension system With templates With log carriage Weiss HdT-L, Year 1996 (can also be sold separately) The machine has been out of operation for quite some time and should be thoroughly checked and overhauled. Location: Austria, near 8700 Leoben

Condition: new, Year of construction: 2025, Stepfeeder MUL SF 3 For log diameter 10 - 50 cm Available in 2, 3, 4 or 5 sections Bledpfx Asv Ak Ifsfqep Width starting from 1800 mm Height - minimum 1500 mm Heavy and solid constructed Hydraulic movement. Max 20 strokes per minute. Fully automatic loading system with sensors and controller

Condition: new, Year of construction: 2025, ARE YOU INVOLVED IN CUTTING THICK LOGS AND ARE YOU LOOKING FOR A POWERFUL BAND SAW THAT WILL CUT YOUR THICK LOG WITHOUT PROBLEMS? THEN WE HAVE A SOLUTION FOR YOU, THE HORIZONTAL BAND SAW WRC 1550! ✔️ROBUST CONSTRUCTION THAT ENABLES SAW STABILITY Bljdpfev R Umuox Afqjp ✔️MAIN MOTOR 55-110kW ✔️IDEAL RATIO BETWEEN THE DIAMETER OF THE MAIN WHEELS, THE WIDTH OF THE MAIN WHEELS, THE LENGTH, WIDTH AND THICKNESS OF THE BAND SHEET, WHICH ENABLES ACCURATE, FAST CUTTING ✔️DOUBLE-SIDED BEARING WHEELS THAT ENABLE STABILITY OF THE MACHINE EVEN IN THE LONG TERM! ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW HEAD ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW LINE (INCLUDING HYDRAULIC DOUBLE TURNERS DESIGNED SPECIFICALLY FOR TURNING THICK HEAVY LOGS) 👉 For more information and inquiries, contact us!

Condition: used, HewSaw R200 Bodpfenabxasx Afqelp