Condition: excellent (used), Year of construction: 2021, For sale is a complete Wravor 1150 band saw in excellent condition. Year of manufacture: 2021. Fsds Ai Eruopfx Aanspp Upon request, we can also supply a material feed system for it.

Condition: used, RMS 300 Reignmac Multi Rip Saw. Came out working. 33.37kW . Saws 200mm to max of 305mm Fpsdpfx Aasz Dx Agsnjp

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 Fodo Aavnfopfx Aanopp – Engine: 15 kW Cutting dimensions: – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops – Material press – Toothed rotator – 2 loading arms Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed – Electric blade guide arm – Hydraulic blade tensioning system with air cushion – Bark remover

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 160 mm, saw drive: 55,000 W, Multi-blade circular saw / edge trimmer / resawing saw FR 7 High-performance feed system, separately controlled from the saw drive, with frequency converter retrofitted Previously used as a resawing machine with a fixed fence Fpodpfx Aao Aii Ngsnsp Includes templates and carbide-tipped saw blades Inspection possible by appointment Still in working condition

Condition: like new (used), Year of construction: 2014, operating hours: 2,808 h, functionality: fully functional, input voltage: 400 V, overall weight: 3,760 kg, intake manifold diameter: 200 mm, noise level: 75 dB, actuation type: manual, The machine is in like-new condition. It has only 2,880 operating hours. It can also be inspected while in operation. Fpsdpfoz R Uf Hox Aanop

Condition: used, - VK 26TRE-2R as a spare parts carrier - VK 26 as a spare parts carrier Fpjdpfx Aas Aifzgjnsp - various cutting blades VK 26 - various springs VK - transport rollers VK 16 - rotor and rotor carrier VK 26 - various spare parts VK 16 and VK 26 All parts are used.

Condition: used, Year of construction: 1988, functionality: fully functional, Wood removal: up to 8 packages possible Fpedpfx Aae Ah Ekmonop Sorting: sorting for 3 qualities possible Magazines: seven magazines with a slat length of 1.30m Four of these can be converted to a slat length of 1.10m Availability: Week 2/2027 Dismantling: Dismantling will be carried out by us (OLWO Worb AG). Transport: Transport will be organized by the buyer.

Year of construction: 2012, condition: good (used), cutting height (max.): 350 mm, neva orbit plus Fpedpfoz R Uvxsx Aansp 350 mm, with numerous frame saws and grinding machines.

Condition: used, Year of construction: 1980, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: CMS- MI, cutting length (max.): 6,000 mm, year of last overhaul: 2023, Equipment: cabin, documentation/manual, scorer, We are offering for sale our BonGioanni brand band sawmill. It features complete control systems, an operator cabin, log storage, infeed conveyors, and transport tracks. Fsde Ad Ur Ropfx Aanepp Wheel diameter: 1300 mm Wheel width: 170 mm Log carriage length: 4300 mm Distance between log clamping claws: 1710 and 830 mm Motor power: 55 kW Log splitting saw.

Condition: ready for operation (used), Bochoud band sawmill, available from our Swiss location. Fsdpfx As Airqyoanepp

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Fedpfjzagkzjx Aanopp Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Paul resawing and multi-blade circular saw BM 160. Cutting height 160 mm. Throughfeed width 750 mm. Reinforced hydraulic feed, infinitely adjustable from 0 - 85 m/min. Roller pressure amplification. Triple anti-kickback device. Saw arbor 550 NSP. Safety device. Fjdpfo Aitibox Aanjpp 45 kW motor mounted. Electrical control cabinet. Has been out of operation for several years.

Condition: used, Year of construction: 2022, Manufacturer: SERRA Maschinenbau GmbH, Germany Type: Log band saw (Block bandsaw machine) Model / Type XE135-6-S / XE135 Year of manufacture: 2022 Material number / factory number: XE135-2022-1750 Identification number: W09XE6060NESD1750 Power supply: 3-phase, 400 V, 50 Hz Current (from nameplate): 70.8 A Operating pressure: 180 bar Weight: 5350 kg Catalogue specifications XE135: Basic cutting length: 6 m Nominal log diameter: Up to 135 cm Cutting width: 100 cm Clearance above / below the blade: 50 cm / 111 cm Blade wheel diameter: 800 mm Blade width: 120 mm; also 140 mm Blade length: 5520-6030 mm, depending on the setting Blade thickness: 1.1 or 1.2 mm Tensioning mechanism stroke: 300 mm Guide / guard opening: Hydraulic Head height adjustment: Electric Head feed: Electric / hydraulic Log handling: Hydraulic Frame: I-beams 300 mm; steel supports 20 mm Wood support surfaces: Stainless steel Fodpfx Ao Aful Hjanopp Catalogue performance: 33 m³ / 8 h Seller contact: 571*326*804 Machine currently operating in Poland.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Brodbaek centering device. Fedpfxj Ahhzao Aanspp

Condition: used, Used, two-part conveyor belt with a robust steel frame (without shredder) for various transport applications. Technical specifications: - Belt 1: 3,500 x 600 mm - Belt 2: 4,000 x 600 mm Fsde Aigicopfx Aanspp

Year of construction: 2016, condition: used, Mebor VR 900 edger with one mobile saw blade. Fsdpfx Aaoygqyyjnspp

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside Fodpfx Aaeyxhq Uonjpp - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2000, Equipment: crane, Baljer & Zembrod OB/19V-LA – wood sorting crane, 2000. Fjdpfxez Nwxxs Aanopp Price: 70,000 PLN net. For sale: a device for handling, sorting, and transferring roundwood, manufactured by Baljer & Zembrod. Technical specifications: Manufacturer: Baljer & Zembrod Model: OB/19V-LA Crane type: OBX II Year of manufacture: 2000 Chassis number: 1593 Maximum crane reach: 13.2 m Lifting capacity at maximum reach: 2200 kg without grab Operator cabin with air conditioning Drum for winding the power cable The device is designed for use in sawmills and wood storage yards. Price: 70,000 PLN net. Inspection possible by prior arrangement. More information available by phone.

Condition: used, Year of construction: 2022, functionality: fully functional, Used horizontal ZENZ block bandsaw line, type BN 110 S, with complete conveying system, stationary. Automatic infeed system with log feed-in device, control panel for the block bandsaw, with cutting program and conveying system for the removal of cut material, including a sorting conveyor. Year of manufacture: 2007; general overhaul in 2022 Conveying system year of manufacture: 2022 Manufacturer's number: 141-8300 Equipment: • 22kW drive motor • 7m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 leveling supports with clamps (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • PLC on the left - joystick on the right Fjdpo Adr Uvsfx Aanspp • 1 Zenz sharpening machine, type AHB (factory number: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water lubrication system with 20l tank and nozzle o Mounted on the blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifting preparation in the frame o With control unit o Holder for pipe o Two holders for cylinders • Ejector, hydraulically operated, for 820mm frame • Green laser indicator, horizontal Mechanization consisting of: • Folding frame, hydraulically operated, for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors run simultaneously • Roller conveyor, 4m long, slightly inclined with stop o All electrical and hydraulic elements can be operated from the control panel The block bandsaw, including the conveying system, is fully operational. If required, we can provide support with dismantling and assembly.

Condition: good (used), Year of construction: 2000, operating hours: 40,000 h, functionality: fully functional, track width: 3,000 mm, Equipment: crane, low noise, BZH sorting and cutting trolley. Track gauge: 3m. OBX 2 crane. Lifting capacity at 13.20m: 2200kg without grapple. Fpodszycf Tepfx Aansp Chainsaw on the right side. Crane positioned in front of the cab. Grapple. Sold separately.

Condition: good (used), functionality: fully functional, Primultini 1300, fully functional and in very good working condition. Fpodpe Ahdv Sofx Aansp

Condition: ready for operation (used), Year of construction: 2013, For sale is a Baljer Zembrod OBX V-24 with up to 200m of rail. Fodjwxndnepfx Aanjpp

Condition: good (used), functionality: fully functional, EWD High-Performance Frame Saw – HDN 600 / GDZ 600 / LSH Fpjdpfxe Ahfmdj Aansp Several EWD high-performance and full-frame saws in very good technical condition are available for sale. The machines can be offered individually or together, depending on the model. Complete overhaul possible upon request. EWD HDN 600 – High-Performance Frame Saw / High-Speed Frame Saw Well-maintained, high-performance EWD HDN 600 full-frame saw in very good condition. Already renewed or modernized: * Struts renewed (2026) * Flywheel renewed (2026) * Water-cooled guides installed (2026) Technical Data Manufacturer: EWD Type: HDN 600 Frame width: 710 × 735 mm Stroke: 600 mm Speed: 310 rpm Equipment / Scope of delivery * Fully hydraulic design * Automatic overhang adjustment * Hydraulic saw tensioner * Hydraulic saw chuck * Pre-selection gearbox * Drive motor * Hydraulically driven splitting wedge, type AVER * Remotely controlled clamping carriage * Electrical control cabinet with control system The system is in very good technical condition and can be completely overhauled and delivered upon request. --- EWD GDZ 600 – Full-Frame Saw / Frame Saw An EWD GDZ 600 is also available in very good condition. Equipment / Scope of delivery * Hydraulic saw tensioner * Splitting wedge * Pre-selection gearbox * Remotely controlled clamping carriage H38 * Cabin The EWD GDZ 600 can also be offered with a complete overhaul upon request. --- EWD LSH Frame Saw In addition, 1 x EWD LSH frame saw is in stock. Further details on design, equipment and technical condition are available upon request. Availability All machines can be inspected by appointment. Further technical data, photos, prices and information on the respective scope of delivery are available upon request.

Condition: like new (used), functionality: fully functional, Log sorting line with 4 pockets, 2 on each side. Material diameters 100–500 mm, lengths 3–5 m. Fpsdpez Dtchsfx Aanop Log deck 12 m: new Step feeder: new Receiving conveyor, 10 m: refurbished Pockets, 13 m: partly new Electronics: new Hydraulic system: new

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). If you have any questions, please do not hesitate to contact me. Fpsdpfsyz Ia Iox Aanjp