Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 – Engine: 15 kW Crjdpfx As Aavnfopmji Cutting dimensions: – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops – Material press – Toothed rotator – 2 loading arms Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed – Electric blade guide arm – Hydraulic blade tensioning system with air cushion – Bark remover

Condition: used, RMS 300 Reignmac Multi Rip Saw. Came out working. 33.37kW . Saws 200mm to max of 305mm Credsz Dx Agopfx Apmsi

Condition: used, Year of construction: 1988, functionality: fully functional, Wood removal: up to 8 packages possible Sorting: sorting for 3 qualities possible Magazines: seven magazines with a slat length of 1.30m Four of these can be converted to a slat length of 1.10m Availability: Week 2/2027 Crjdpj Ah Ekmsfx Apmsi Dismantling: Dismantling will be carried out by us (OLWO Worb AG). Transport: Transport will be organized by the buyer.

Condition: like new (used), Year of construction: 2014, operating hours: 2,808 h, functionality: fully functional, input voltage: 400 V, overall weight: 3,760 kg, intake manifold diameter: 200 mm, noise level: 75 dB, actuation type: manual, The machine is in like-new condition. It has only 2,880 operating hours. It can also be inspected while in operation. Crsdpfx Aoz R Uf Hopmji

Year of construction: 2012, condition: good (used), cutting height (max.): 350 mm, neva orbit plus Crodpfx Asz R Uvxjpmoi 350 mm, with numerous frame saws and grinding machines.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Brodbaek centering device. Cede Ahhzaopfx Apmeri

Condition: used, Year of construction: 1980, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: CMS- MI, cutting length (max.): 6,000 mm, year of last overhaul: 2023, Equipment: cabin, documentation/manual, scorer, We are offering for sale our BonGioanni brand band sawmill. It features complete control systems, an operator cabin, log storage, infeed conveyors, and transport tracks. Wheel diameter: 1300 mm Wheel width: 170 mm Log carriage length: 4300 mm Csdpfx Ao Ad Ur Ropmjri Distance between log clamping claws: 1710 and 830 mm Motor power: 55 kW Log splitting saw.

Condition: used, Year of construction: 2022, Manufacturer: SERRA Maschinenbau GmbH, Germany Type: Log band saw (Block bandsaw machine) Model / Type XE135-6-S / XE135 Year of manufacture: 2022 Material number / factory number: XE135-2022-1750 Identification number: W09XE6060NESD1750 Power supply: 3-phase, 400 V, 50 Hz Current (from nameplate): 70.8 A Operating pressure: 180 bar Weight: 5350 kg Cjdpfx Apo Aful Hjmsri Catalogue specifications XE135: Basic cutting length: 6 m Nominal log diameter: Up to 135 cm Cutting width: 100 cm Clearance above / below the blade: 50 cm / 111 cm Blade wheel diameter: 800 mm Blade width: 120 mm; also 140 mm Blade length: 5520-6030 mm, depending on the setting Blade thickness: 1.1 or 1.2 mm Tensioning mechanism stroke: 300 mm Guide / guard opening: Hydraulic Head height adjustment: Electric Head feed: Electric / hydraulic Log handling: Hydraulic Frame: I-beams 300 mm; steel supports 20 mm Wood support surfaces: Stainless steel Catalogue performance: 33 m³ / 8 h Seller contact: 571*326*804 Machine currently operating in Poland.

Year of construction: 2016, condition: used, Mebor VR 900 edger with one mobile saw blade. Cedpfx Ajygqyyopmeri

Condition: good (used), functionality: fully functional, EWD High-Performance Frame Saw – HDN 600 / GDZ 600 / LSH Several EWD high-performance and full-frame saws in very good technical condition are available for sale. The machines can be offered individually or together, depending on the model. Complete overhaul possible upon request. EWD HDN 600 – High-Performance Frame Saw / High-Speed Frame Saw Well-maintained, high-performance EWD HDN 600 full-frame saw in very good condition. Already renewed or modernized: * Struts renewed (2026) * Flywheel renewed (2026) * Water-cooled guides installed (2026) Technical Data Manufacturer: EWD Type: HDN 600 Frame width: 710 × 735 mm Stroke: 600 mm Speed: 310 rpm Equipment / Scope of delivery * Fully hydraulic design * Automatic overhang adjustment * Hydraulic saw tensioner * Hydraulic saw chuck * Pre-selection gearbox * Drive motor * Hydraulically driven splitting wedge, type AVER * Remotely controlled clamping carriage * Electrical control cabinet with control system The system is in very good technical condition and can be completely overhauled and delivered upon request. --- EWD GDZ 600 – Full-Frame Saw / Frame Saw An EWD GDZ 600 is also available in very good condition. Equipment / Scope of delivery * Hydraulic saw tensioner * Splitting wedge * Pre-selection gearbox * Remotely controlled clamping carriage H38 * Cabin The EWD GDZ 600 can also be offered with a complete overhaul upon request. --- EWD LSH Frame Saw In addition, 1 x EWD LSH frame saw is in stock. Further details on design, equipment and technical condition are available upon request. Availability All machines can be inspected by appointment. Credpfx Ae Ahfmdspmsi Further technical data, photos, prices and information on the respective scope of delivery are available upon request.

Condition: good (used), functionality: fully functional, Primultini 1300, fully functional and in very good working condition. Credpj Ahdv Sofx Apmei

Condition: excellent (used), functionality: fully functional, VK26M debarking machine with infeed and outfeed roller system The machine is in excellent condition and has been used very little. It has been inspected in the workshop. Scope of delivery: Main machine, infeed rollers and tilting table. Technical data: * Debarking diameter: 10–61 cm * Rotor opening: 65 cm * 4 main peeling knives and 4 cutting knives * Rotor speed: 235 rpm * Main motor: 30 kW, 1,500 rpm * Feed rate: 17–42 m/min Crsdpfe Ahzqpex Apmji * Suitable for wood lengths from 3 m

Condition: used, Year of construction: 2022, functionality: fully functional, Used horizontal ZENZ block bandsaw line, type BN 110 S, with complete conveying system, stationary. Automatic infeed system with log feed-in device, control panel for the block bandsaw, with cutting program and conveying system for the removal of cut material, including a sorting conveyor. Year of manufacture: 2007; general overhaul in 2022 Conveying system year of manufacture: 2022 Manufacturer's number: 141-8300 Equipment: • 22kW drive motor • 7m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 leveling supports with clamps (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • PLC on the left - joystick on the right • 1 Zenz sharpening machine, type AHB (factory number: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water lubrication system with 20l tank and nozzle o Mounted on the blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifting preparation in the frame o With control unit o Holder for pipe o Two holders for cylinders • Ejector, hydraulically operated, for 820mm frame • Green laser indicator, horizontal Mechanization consisting of: • Folding frame, hydraulically operated, for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors Codpo Adr Uvsfx Apmsri o Both roller conveyors run simultaneously • Roller conveyor, 4m long, slightly inclined with stop o All electrical and hydraulic elements can be operated from the control panel The block bandsaw, including the conveying system, is fully operational. If required, we can provide support with dismantling and assembly.

Condition: good (used), Year of construction: 2000, Equipment: crane, Baljer & Zembrod OB/19V-LA – wood sorting crane, 2000. Price: 70,000 PLN net. For sale: a device for handling, sorting, and transferring roundwood, manufactured by Baljer & Zembrod. Crodez Nwxxepfx Apmsi Technical specifications: Manufacturer: Baljer & Zembrod Model: OB/19V-LA Crane type: OBX II Year of manufacture: 2000 Chassis number: 1593 Maximum crane reach: 13.2 m Lifting capacity at maximum reach: 2200 kg without grab Operator cabin with air conditioning Drum for winding the power cable The device is designed for use in sawmills and wood storage yards. Price: 70,000 PLN net. Inspection possible by prior arrangement. More information available by phone.

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. Crjdpoyxhq Ujfx Apmji This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. Codezagkzspfx Apmori And other accessories, such as spare blade guide wheels, etc.

Condition: good (used), Year of construction: 2000, operating hours: 40,000 h, functionality: fully functional, track width: 3,000 mm, Equipment: crane, low noise, BZH sorting and cutting trolley. Track gauge: 3m. OBX 2 crane. Lifting capacity at 13.20m: 2200kg without grapple. Chainsaw on the right side. Crane positioned in front of the cab. Credjzycf Tepfx Apmji Grapple. Sold separately.

Condition: like new (used), functionality: fully functional, Log sorting line with 4 pockets, 2 on each side. Material diameters 100–500 mm, lengths 3–5 m. Crodpfjz Dtchjx Apmji Log deck 12 m: new Step feeder: new Receiving conveyor, 10 m: refurbished Pockets, 13 m: partly new Electronics: new Hydraulic system: new

Condition: reconditioned (used), functionality: fully functional, A CAMBIO 35 debarker is for sale. The CAMBIO 35 is equipped with a baby roll, which enables the debarking of logs with a minimum length of 1.5 m. The set includes a SODERHAMN conveyor with additional rollers after the debarker. The debarker will be sold after a major overhaul. Cjdo Ahi Imopfx Apmsri

Condition: reconditioned (used), functionality: fully functional, 1 Unit = 6 pc. suitable for Cambio 66 infeed and outfeed side Ø approx. 450 mm height: approx 340 mm Csdps Ah Sawofx Apmori shaft mount: Ø 100 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). Crjdpeyz Ia Isfx Apmei If you have any questions, please do not hesitate to contact me.

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 120 mm, total width: 4,600 mm, total height: 2,500 mm, spindle motor power: 10,000 W, product length (max.): 13,500 mm, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis HOLZHER Dynestic 7535 was manufactured in 2018. It features a working area of 3700 x 2100 x 120 mm and a powerful 10 kW spindle with a speed of 24,000 rpm. The machine includes an 18-position tool changer and a complete CNC nesting solution for high-performance cutting and drilling capabilities. If you are looking to get high-quality woodworking capabilities, consider the HOLZHER Dynestic 7535 wood mill we have for sale. Contact us for further details. • Control: Beckhoff TwinCAT 2 (PC-based) • Software: WorkCentre, NC-Hops, Cabinet Control, CAMPUS v7 • Tool holder: HSK-F63 • Tool changer: 18 positions (gantry-mounted) • Drilling unit: 10 vertical, 3 horizontal (4 X, 2 Y) • Saw unit: Groove saw integrated in X direction • Table type: Matrix table (gantry construction) • Automatic tool measurement: up to Ø20 mm • Power: 22 kW • CE marked • Key features: Complete CNC nesting solution; high-performance cutting and drilling; advanced control with DXF compatibility; auto lubrication and cooling system; offline programming capability included • Additional services available upon request: Crsdpozug D Ajfx Apmoi • Mechanical and electrical decommissioning, as well as installation support • Basic application training (HOPS), depending on the operator’s experience • After-sales service, including warranty and potential service interventions handled by the seller (T&Cs apply)Please feel free to ask us for detailed pricing regarding these additional services. Additional equipment • Vacuum system: Becker, 250 m³/h • Air cushion table for easy material handling • Zoned safety mats for safe loading during operation • Additional saw blade holder (up to Ø350 mm)

Condition: excellent (used), Catalog number: 7502 TECHNICAL DATA Infeed carriage DTBC-P Wheelbase 750mm Diameter of the infeed material 100-800mm Total side travel 160mm Log rotation to the left and right 360 degrees Forward and reverse travel speed variable Hydraulic pump motor power 5.5kW Auxiliary carriage DTCB Wheelbase 750mm Crjdpfxj Af Uyvs Apmoi Side travel range 160mm Log rotation to the left and right 360 degrees Side travel motor power 1.1kW Infeed carriage dimensions (L/W/H) 2850/1400/1500mm Auxiliary carriage dimensions (L/W/H) 950/650/750mm Total weight 1450kg ADVANTAGES – Made in Poland – Robust construction – Includes cables and chains – Used machine, very good condition, after a major overhaul (invoice available for inspection) PRODUCT FEATURES The auxiliary carriage is designed to support logs or stacks from the infeed side of the saw, with a diameter range of 100 mm to 750 mm. The infeed carriage is designed to feed logs and stacks to the saws, with a diameter range of 100 mm to 750 mm. The device for manipulating logs, namely for clamping the log in the clamps, performing transverse movement, and rotating the log, is powered by hydraulic drives. Net price: 59900 PLN Net price: 13930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to identify the product. We only resell products that the manufacturer has previously introduced to the market. We have no business ties with the manufacturer.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, For sale is a complete stationary sawmill including a dust extraction system and a log infeed system! The new price for the sawing line alone was over €285,000! TECHNICAL DETAILS Cutting length (max.): 3,600 mm Cutting width (max.): 400 mm MACHINE DETAILS Type of input current: Three-phase Year of last overhaul: 2024 EQUIPMENT Log deck LD1-20LH-3SLP-002 Incline chain conveyor 517100-slp2-002 Log turner 517180-SLP2-002 Wood Mizer set works control unit with chair and joystick controls TBS01 setworks Crjdpfxezki Txj Apmsi First set of vertical saws TVSSC/002/2018 Outfeed conveyor TVSEH15S-SC3.6-SD-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Roller conveyor CR8.3.6H-SLP2-002 Roller conveyor with centralising bed CR8-3.6H-SLP2-002 Roller conveyor with air ram stabilising arms TVSEH15S-FT3.6 Second set of vertical saws TVSEH15S-FT3.6-SLP2-002 Flat chain conveyor with stabilising arms TVSEH15S-FT3.6-SLP2-002 Waste chain conveyor for slab wood removal CC4-3.6H-SLP2-002 Horizontal saw HR700EH15S-1-SLP2-002 Roller conveyor with cross transfer chains CR6.5.4H-P-SLP2-002 Transfer chain conveyer x 8 CC2-2.7H-4-P-SLP-002 Cross cut saw 00/19079 1.65-3.6 Dust extraction system with bag filter and blower unit into trailer.

Condition: like new (used), functionality: fully functional, Saw motor for Linck VSV 80, with 80 kW and telescopic shaft. Codps Ahhzljfx Apmjri Saw motor for Linck VS 66.