Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm Iiedpfxjy E Hynj Ag Uec saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine xH: 1480 x 1700 x 2000 m

Condition: used, Technical details: dimensions of saw-band: 3400 mm saw band length: min. 3200 mm saw band width: 20 mm band speed: 6 / 12 / 25 / 75 / 150 m/min cutting speed: 15 - 1500 / steples m/min Table dimensions: 665 x 665 mm table height over floor: 1050 mm table swivelling to both sides: 15° / 30° Grad table feed: Länge: 250 mm total power requirement: 4,0 kW dimension machine xH: 1,2 x 0,9 x 2,2 m Iiodpfxjv T Th No Ag Ujc Steel and metal band saw with saw band cutting, welding and grinding device Saw band speed 2 steps, infinitely variable Infinitely variable table feed Tiltable table Machine lighting Stop bar *

Condition: used, Technical details: cutting diameter: 280 mm saw band length: 3660 mm saw band width: 25 mm Cutting height: 280 mm application:: Metallsägearbeiten cutting width: 400 mm cutting speed: 35 - 70 stepless m/min machine weight approx.: K.A. kg dimension machine xH: 1,4 x 1,8 x 1,2 m robust and accurate automatic band saw miter cut possible incl. roller conveyor with access approx. 6000mm and exit 3700mm * Iijdpeu Nih Iofx Ag Usc

Condition: used, Year of construction: 1982, Technical details: cutting diameter: 120 mm dimensions of saw-blade: 425 x 30 mm cutting range 90 degrees: round: 120 mm height over floor: 800 mm electrical connection: 380 V / Hz. strokes per minute: 60 / 92 / 140 Hübe/min. total power requirement: 1,5 kW Overall size: ca. L:1,2 x B: 0,75 x H: 1,10 (Bügel angehoben) m Vice adjustable in longitudinal direction by loosening the nuts. Mitre cut and straight cut: 45° and 90° with cutting pressure and lifting hydraulics After the cut is completed, the machine switches off and the saw blade remains in the lowest position. Workpiece holder via fixed jaw and clamping jaw, with hand crank Iodpfx Aou Nilaeg Usic Coolant device in the base limit stop *

Condition: used, Year of construction: 1982, Technical details: dimensions of saw-band: 3920 - 4050 mm Iodpfx Agoyzpkne Uoic throat: 500 mm workpiece height: 400 mm table - inclinable: 15 - 30 Grad Cutting height: 400 mm band speed: 15 - 940 m/min Table dimensions: 800 x 820 mm mm machine weight approx.: 1000 kg dimension machine xH: 1,3 x 1,3 x 2,2 m

Condition: used, Technical details: cutting diameter: 260 mm Iedsy Dc N Ajpfx Ag Usic saw band length: 4310 mm saw band width: 27 mm cutting range 90 degrees: round: 260 mm cutting range 90 degrees: square: 260 x 260 mm band speed: 17 - 110 m/min electrical connection: 400/50 V / Hz. total power requirement: 3,5 kW machine weight approx.: 1000 kg dimension machine xH: 2,3 x 1,0 x 1,4 m dimensions L x W x H: 3,0 x 0,4 x 0,8 m

Condition: used, Technical details: Ijdpsu Niuzefx Ag Usic Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: used, Year of construction: 1991, Technical details: cutting diameter: 240 mm saw band length: 3000 mm saw band width: 20 x 0,8 mm cutting range 90 degrees: round: 240 mm band speed: 20; 35; 50; 70 m/min total power requirement: 1,8 kW machine weight approx.: 330 kg dimension machine xH: 1,9 x 1,1 x 1,1 m hydraulic operation clamping jaw size 150 x 100mm, manual clamping (hand wheel) 1 transport roller each before and after vice support incl. 4 pieces band saw blades incl. 2 pieces roller tables (2000 x 520 x 750mm and 1000 x 520 x 750mm) incl. limit 3000mm Isdpfxsu Nihus Ag Ujic *

Condition: used, Technical details: cutting diameter: 460 mm saw band length: 4670 mm saw band width: 45 mm cutting range 90 degrees: round: 460 mm cutting range 90 degrees: square: 320 x 500 mm band speed: 16...160 m/min feed stepless: ja / jes / Sí mm/min electrical connection: 380 V / Hz. total power requirement: ca. 7,5 kW machine weight approx.: 2900 kg dimension machine xH: 2,8 x 2,45 x 1,7 m dimensions L x W x H: Rollenbahn: 1,1 x 0,6 x 0,3 m FULLY AUTOMATIC BANDSAW Manual and automatic operation Multiple stroke = single up to 580mm and multiple up to 5220mm Tension via clamping jaws WxH: 100 x 250mm motorized band tensioning Saw blade cooling piece counter Lubrication of the saw blade guide Accessories: Infeed track, motor-driven, LxW: 1300mm x 530mm Iijdpfx Asu Niixsg Ujc Outfeed track LxW: approx. 1000mm x 750mm *

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm Iijdpfxou Nilyo Ag Uoc cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Condition: used, Year of construction: 1983, Technical details: throat: 315 mm throat in width: 310 mm throat in - height: 230 mm Iisdpfx Aova E E Tog Usc saw band length: 2530 - 2650 mm saw band width: 13 mm band speed: 12 - 750 m/min Table dimensions: 500 x 500 mm table height over floor: 950 mm total power requirement: 1,3 kW machine weight approx.: 450 kg dimension machine xH: 0,8 x 0,7 x 1,65 m Steel and metal band saw Filing band length 2550 mm Additional equipment: Saw band processing Ideal -> saw band cutting device-saw band welding device-saw band grinding device Cooling via spray feeder Foot control Accessories -div. saw bands -1x running wheel Ø 320 mm -Saw band by the meter RRR Roentgen *

Condition: used, Make: Honeywell BraukmannType: R 295 SAType of installation: 2 Iodpfxedc A R Re Ag Usic

Condition: good (used), Support stand, assembly stand, steel stand, welding table, assembly table, work stand, heavy-duty support stand, mobile stand, support stand, trestle, support stands -Auxiliary stand: Steel stand with spring-loaded chassis -Height: 430 mm -Load capacity: 15 tons distributed load -Number: 14 axle stands available -Price: per piece Isdey Ndy Hspfx Ag Ueic -Dimensions: 410/1200/H430 mm -Weight: 60 kg

Condition: used, Year of construction: 2025, cutting diameter max. 225 mm saw band length 2.480 mm Iodpfxjykb Enj Ag Ueic width of saw-band 27 mm dimensions of saw-band 2.480 x 27 x 0,9 mm cutting angle 0 - 60 ° band speed 20 - 90 m/min Cuttingrange 90° max. 225 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 150 x 245 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 120 x 90 mm capacity 45 degrees: round 145 mm capacity 45 degrees: square 150 mm capacity 45 degrees: flat 190 x 150 mm total power requirement 1,5 kW weight of the machine ca. 185 kg dimensions of the machine ca. 1,5 x 1,2 x 1,6 m Metal Bandsaw OPTIMUM - OPTIsaw S 275 PV

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Iodelqadhspfx Ag Usic Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm width without fence 800 mm weight approx. 750 kg good condition

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Iedeuqgbtopfx Ag Ujic Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Condition: used, Year of construction: 2015, machine/vehicle number: 111376, Belt length approximately 3,800 mm, automatic tensioning device. Iisdpfx Aoy U R Saeg Uec

Condition: used, Year of construction: 1977, roll diameter 420 mm throat 410 mm workpiece height 265 mm width of saw-band 3 - 25 mm cutting speed 12 - 375 m/min table surface area 600 x 600 mm Iijdpfxsy T Sdbs Ag Usc total power requirement 1,7 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,0 x 0,9 x 1,9 m

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Isdpfjd N H A Nox Ag Ujic Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, Double Mitre Saw RAPID Type DGL 5000 / 500 In need of repair - control unit non-functional Year of manufacture: 1993 Cutting length: 5000 mm Shortest cut length: 350 mm Saw blade diameter: 500 mm - Control unit non-functional Space requirement (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are making space Affordable machine – ideal for export Iedpsyxy S Djfx Ag Ueic

Condition: used, Column-guided bandsaw semi-automatic METORA - KALTENBACH Type HMB 380 DS Only for 90° cuts (Made in Austria) Machine No. 4580028 Year of manufacture: approx. 1993 Cutting capacity round: Ø 380 mm Iiodpfx Agsdzqtgj Ujc Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw band speed: 25–108 m/min, continuously variable Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw in double-column design - Hydraulic saw bow descent with stepless adjustable cutting pressure - Stepless adjustable descent speed - Hydraulic vice clamping with hydraulic bundle clamping from above - Hydraulic unit integrated in machine base - Material feed roller on infeed side with geared motor (not mounted on machine frame) - Coolant system with coolant pump for water emulsion - Minimum-quantity lubrication system for the saw blade - Electric heating cartridge for cooling water and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display, and hydraulic stop carriage clamping Stop length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable without roller conveyor Machine footprint (L x W x H): 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of stop system: approx. 800 kg In good condition

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm Iisdpfx Agey I Da Ro Usc - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: used, Year of construction: 2009, machine/vehicle number: 0102-250002, The Behringer HBP310-523GA double mitre bandsaw is a high-quality, robust machine that has been specially designed for professional use in metalworking. It offers an excellent combination of performance, precision and versatility, making it suitable for a wide range of applications in the industry. The HBP310-523GA is sold including roller conveyor in the infeed and outfeed side, feed gripper system and cross feed system in the outfeed area. The machine is in very good condition. Working areas of the HBP310-523GA saw Mitre left 75° round 310 mm, flat W x H = 520 x 310 mm 60° round 310 mm, flat W x H = 450 x 310 mm Iijdpfx Asyh Ixaog Uoc 45° round 310 mm, flat W x H = 350 x 310 mm 30° round 230 mm, flat W x H = 230 x 310 mm Mitre right 75° round 310 mm, flat W x H = 500 x 310 mm 60° round 310 mm, flat W x H = 420 x 310 mm 45° round 270 mm, flat W x H = 270 x 310 mm Minimum round: 20 mm Maximum material length: 10 m

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, cutting length (max.): 6,000 mm, Elumatic double miter saw incl. accessories, short-length cutting device, infeed roller conveyor, ECI-580 control system. Iedpfxjzfaglj Ag Uoic

Condition: good (used), Column-guided band saw fully automatic METORA type VMB 305 DS only for 90° cuts Machine number 4690022 Cutting range round Ø 300 mm Square 305 x 305 mm Saw band speed approx. 25-108 m/min. stepless Material inlet height approx. 570 mm Hydraulic drive power 1.5 kW Drive power saw motor 4 kW Mains connection 400 volts, 50 Hz Strap dimensions approx. 4900 x 41/ 32 x 1.3 mm - Fully hydraulic band saw in two-column design - Hydraulic saw frame lowering with stepless cutting pressure adjustment - Infinitely adjustable lowering speed - Hydraulic vice clamping, bundle clamping - Hydraulic unit integrated in the machine base Isdpfxefd U Tbe Ag Ueic - Coolant device with cooling lubricant pump for water emulsion -with chip conveyor for removing the cutting chips (not shown) - Year of construction subject to change