Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display Csdpfxjxab R Uo Adasri - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: excellent (used), Year of construction: 2010, Automatic Mitre Bandsaw Credpfx Aextuzgodaei Fully automatic operation for mitre cuts from 90° to 30° Infinitely variable adjustment of mitre angles Infinitely variable band speed from 17 to 110 m/min Cutting capacity: 90° / 45° / 30° Round mm: Ø320 / Ø320 / Ø200 Square mm: 320x320 / 300x300 / 200x200 Flat (W x H) mm: 450x200 / 300x300 / 200x300 Weight: 1400 kg With 10-metre infeed conveyor Operating instructions and manuals available. Very good, well-maintained condition

Condition: excellent (used), PERTICI UNIVER 50 SEMI-AUTOMATIC MITRE SAW This machine is primarily designed for cutting aluminium and PVC profiles. Both mechanical and electrical safety features of the guards have been given special attention. During upward cutting, the operator is protected by the top cover as well as by the machined profile. The cutting angle can be manually set from 0 to 67.5 degrees, both left and right, by rotating the turntable. Seven fixed stops (67.5 - 60 - 45 - 0 - 45 - 60 - 67.5) enable cutting without adjustment. Other positions are set using a graduated rule. Motor: 5.5 HP Three-phase supply Blade diameter: 500 mm Cutting capacity at 90°: diameter 178 mm or 160 x 160 mm 1 carbide blade, diameter 500 mm 2 vertical pneumatic clamps 2 horizontal pneumatic clamps Blade lubrication. Cedexp Rx Tjpfx Adaori

Condition: used, Year of construction: 1998, cutting diameter 1360 mm saw band length 8738x80x1,6 mm cutting width 1060 mm KASTO BBS 1360/1060 block band sawing machine Hydraulic saw blade tensioning, factory-set. Mobile sawing machine for heavy sawing work on large blocks/slabs. Credsxt Uvkopfx Adasi Technical data Total drive power approx.: 13kW Saw motor approx.: 7.5kW Max. cutting height with cut monitoring: 1360 mm Max. cutting height without cut monitoring: 1420 mm Cutting height with pressure roller: 1280 mm Min. cutting width: 10 mm Max. cutting width with electromechanical measuring stop approx.: 1000 mm Cutting width without measuring stop: 1060 mm Cutting speed: 14-75 m/min Cutting feed: 0.7-270 mm/min Saw blade dimensions: 8738 x 80 x 1.6 mm or 8738 x 67 x 1.6 mm Rake width: 2.4 mm Saw blade guide: carbide, replaceable and adjustable Saw blade back guide: roller, replaceable Saw blade cleaning: by easily replaceable plastic brushes, motorised Coolant: supplied via two coolant nozzles Pump capacity approx.: 100 litres/min On request, we can also offer you the 7 immediately available saw blades at an additional cost.

Condition: good (used), Year of construction: 2002, Machine is in good condition. Cedpfjxu Ea Njx Adasri

Condition: used, functionality: fully functional, saw band length: 4,800 mm, saw band width: 16 mm, type of input current: three-phase, empty load weight: 1,200 kg, Equipment: rotational speed infinitely variable, Pehaka USF -10-R Good condition – ready for immediate use. Table size 750x840mm, hydraulically adjustable; fixed table 500x580mm Band speeds: 12 m/min up to 2000 m/min Infinitely variable drive – variomatic File band device Circular cutting device No welding unit Transport can be organized at buyer’s expense upon request Free loaded on truck (FCA); loading for collection is no problem Collection possible at any time Shipping also available outside the EU For further questions, feel free to call. Crjdpfx Adjxrb Azeaoi

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Csdpfsxpd D Nex Adasri Voltage: 400 V Air connection: 6 Bar

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: Cedpfxovmtdkj Adaeri 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Voortman VB1250 lintzaag kap: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale boorunits 1 verticale booreenheid elke unit heeft een automatische gereedschapswisselaar met 5 posities spindel: SK40 (koeling via spindel) boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm draadtappen: M8/M24 profielhoogtemeting inbegrepen middelpuntmarkering inbegrepen nummermarkeringseenheid inbegrepen 18 meter invoerrollenbanen 6 dwarstransportbanden van 4 meter lengte maximale breedte: 1050 mm cap: 400 kg/m max positioneringsgewicht: 9 ton Roltransportmeetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4kW - 160 bar Cjdpfxowlkwwj Adaeri

Condition: used, Year of construction: 1988, A fully automatic band saw with hydraulic material feed is for sale. Manufacturer: Amada Model: HA 250 Year of manufacture: 1988 Location: Bremen The machine was stored in fully functional condition as a backup unit in case another saw failed. It has not been used since and the warehouse is now being cleared. _____ Our general terms and conditions apply; in addition, the seller assumes no liability for typographical or data transmission errors. The information and images have been provided to us by the owner and authorized for publication. The appearance of the items offered corresponds to their age and the images shown. The technical condition and wear of the items offered are appropriate for their age. Used machines are sold exclusively to commercial buyers and without any warranty. Credpfxjxrtr Ij Adasi

Condition: used, Max. saw blade diameter: 350 mm Manual saw feed 2 sawing speeds Coolant lubrication Crodpfxsxn Ivgj Adasi

Year of construction: 2025, condition: new, Material support stand No. 100006, height 650-1050 mm, powder-coated, RAL 7011 Crsdpfx Adjxqrghsasi

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2021 102 14, Offer 25300 Technical specifications: - Manual band saw Csdsxup Ttjpfx Adasri - Saw band dimensions: 2750 x 27.0 x 0.9 mm - Infinitely variable cutting speeds: N 15 / 90 m/min - Max. clamping capacity: 355 mm - Mitre adjustable left and right up to 30° - Cutting range: - 90°: - round: 255 mm - square: 190 mm - flat: 310 x 190 mm - 45° left & right: round 215 mm - Drive: 400 V / 1.5 kW - Coolant system - Weight: approx. 350 kg - Space requirement: approx. W 700 x H 1600 x D 1700 mm

Condition: used, 1 piece metal band saw KASTO KASTOCUT G U3 with 2 work stands, as per photos and inspection Colour: grey Condition: used Payment method: Advance payment by bank transfer Storage location: Hall 2 Shipping: Collection only – Shipping is not offered for this item! Codpfx Aoxrcqmedaori

Condition: used, saw blade diameter 560/660/710 mm cutting diameter 170/220 mm Csdpfoxnc U Rox Adaeri cutting range 1000 x 220 mm cutting speed 7- 48 m/min clamping devices hydraulic pneumatic 20- 315 mm dimensions 2,9 x 2,2x 1,95 m weight of the machine ca. 2,8 t Used plate saw - part fixures - new security componens - external control panel

Condition: used, Year of construction: 2014, functionality: fully functional, saw band length: 5,700 mm, saw band width: 41 mm, cutting range round steel at 90°: 440 mm, cutting width (max.): 440 mm, cutting height (max.): 520 mm, Ref. No. 5.4-780 1 used automatic bandsaw KASTOtwin A4x5, year 2014 Chip conveyor Coolant system Technical specifications: Cutting range round: 440 mm Cutting range square: 520 x 440 mm Infinitely variable cutting speed: 15–150 m/min Saw blade dimensions: 5700 x 41 x 1.3 mm Drive capacity: 5.5 kW Machine weight approx.: 3000 kg Technical data, accessories and machine description are non-binding. Csdexrcppspfx Adaori

Condition: good (used), gearing type: mechanical, Do you have gearbox damage on your Behringer or Kasto saw .....? Codpfx Adjtv Eyvoasri We can repair or refurbish your gearbox, no problem. In some cases we can also supply you with replacement gearboxes from stock

Condition: new, The B 200 S is a robust Horizontal Mitre Cutting Bandsaw designed for efficient and precise cutting in industrial workshops and one-off production settings. As an entry-level model in the Semi-Auto Bandsaw category, this KNUTH machine features a swiveling saw frame that allows for miter cuts of up to 45 degrees, enhancing versatility for various tasks. The infinitely variable saw frame feed is controlled by a hydraulic valve, providing precise adjustments even during operation. Built for durability, the one-piece cast-iron saw frame and low-maintenance V-belt drive ensure consistent performance while minimizing vibration and noise. Equipped with a coolant system, quick-release device, and mobile base, the B 200 S is engineered for ease of use. With a cutting capacity of 205 mm for round materials and 205 x 215 mm for flat materials, this Horizontal Mitre Cutting Bandsaw is a smart addition to any workshop. You can order online to take advantage of this reliable solution from KNUTH. Credpfx Adsuyh I Uoasi

Condition: good (used), Year of construction: 2019, machine/vehicle number: 24451.19, Offer 25359 Technical Data: - Cutting capacity at 90° (round): 250 mm - Cutting capacity at 90° (flat): 275 x 180 mm - Miter adjustment to the left - Cutting capacity at 45° (round): 200 mm - Cutting capacity at 45° (flat): 190 x 180 mm - Cutting capacity at 30° (flat): 130 x 110 mm - Material support height: approx. 920 mm - Saw band dimensions: 3100 x 27 x 0.9 mm - Infinitely variable cutting speed: 15 to 100 m/min Crjdpfx Adjxup Rfoaoi - Hydraulic lifting and lowering of the saw frame - Upper travel limit of the saw frame - Infinitely adjustable cutting pressure: 0 – 10 m/min - Hydraulic material vice - Micro-spray cooling system - Total drive power: 400 V / 2.2 kW - Required space approx.: W 2400 x H 1600 x D 1800 mm - Weight approx.: 1300 kg - 3 x Roller conveyor, each 1500 mm

Condition: used, cutting diameter 230 mm saw band length 2770 mm table height 940 mm capacity 90 degrees: round 230 mm capacity 90 degrees: flat 280 x 150 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round R 180 mm capacity 45 degrees: round L 200 mm capacity 45 degrees: square R 155 x 155 mm capacity 45 degrees: flat R 180 x 90 mm capacity 45 degrees: square L 180 x 180 mm capacity 45 degrees: flat L 200 x 100 mm capacity 60 degrees: round 135 mm capacity 60 degrees: square 95 x 95 mm capacity 60 degrees: flat 130 x 90 mm clamping head: 280 mm cutting speed 40 / 80 m/min total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,34 t dimensions of the machine ca. 1,4 x 0,8 x 1,8 m Miter band saw with: Cedpfxexq Hhao Adaori - AutoCut - Micro spray system

Condition: good (used), Year of construction: 1997, Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Scmidt, aluminum metal circular saw Velox 350 24V with solid base frame -Saw blade: Ø 350 mm 1800/3600 rpm -Double miter: 45° Cjden D Urpspfx Adaori -Cutting capacity-round: 90°/45°: Ø 120 | 115mm -Cutting capacity-Square 90°/45°: 200x88 | 150x80mm -Drive: 1.5/1.8 kW -Double clamping device: manual operation -Dimensions: 900/585/H1850 mm -Weight: 194 kg

Condition: used, Year of construction: 1997, cutting diameter / mm saw band length / mm cutting width / mm Control / Csdexrvmzepfx Adaeri KASTO HBA 1060/1260AU band saw Cutting range: 1060x1260mm Cutting speed: 16-80m/min Workpiece weight: Max. 20 tonnes Saw blade: 11400x80x1.6mm Includes remote control Machine weight: 19 tonnes On request, we can offer you the 5 immediately available saw blades at an additional cost.

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Cjdpfx Adogd Si Eoasri Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: excellent (used), Year of construction: 2010, Bernardo VMS 360 vertical band saw. Top condition as a training machine - hardly used The vertical band saws in the VMS series are suitable for sawing almost all sawable materials (e.g. steel, plastic, non-ferrous materials, colored materials, etc.). They are mainly used in general production, in tool and fixture construction for the manufacture of punching and cutting tools. Cutting width: 355 mm Csdpevutxdofx Adaori Cutting height: 230 mm Working height: 960 mm Cutting speed 20 - 90 m/min Saw band length: 2840 mm Saw band width: 3 - 16 mm Table size: 500 x 400 mm Motor power: 0.75 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H) 940 x 560 x 1850 mm Weight approx. 250 kg Comes standard with band welding device, annealing device, scissors and grinding stone Comes standard with continuously adjustable cutting speed Machine body made of robust steel construction for smooth running Precision blade guide for optimal cutting results Ideal for sawing complicated contours and shapes Blow-out device with compressor included in delivery For radius sawing, saw bands from 3 mm width available Solid cast iron table, the large support surface ensures safe working Location: from stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range Cjdpfx Asg U Uv Rodajri 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S