Condition: new, Year of construction: 2025, Optimum Metal Band Saw OPTIsaw S 275NV Metal band saws with pivoting saw frame. S 275NV with continuously adjustable saw blade speed Item number: 3300265 TECHNICAL DATA Dimensions and weights Length (product) approx. 1400 mm Width/Depth (product) approx. 685 mm Weight (net) approx. 185 kg Max. width/depth (product) approx. 985 mm Max. height (product) approx. 1700 mm Electrical data Drive motor power: 1.5 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 90 W Machine data Saw blade speed(s): 20 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: continuously variable Adjustable Manual saw frame lifting Codjgx T I Uopfx Adasri Cutting ranges Cutting range 0° round (solid material) 225 mm Cutting range 0° square (solid material) 190 mm Cutting range 0° rectangular horizontal (solid material) 150 x 245 mm Cutting range +45° round (solid material) 145 mm Cutting range +45° square (solid material) 150 mm Cutting range +45° rectangular horizontal (solid material) 190 x 150 mm Cutting range +60° round (solid material) 90 mm Cutting range +60° square (solid material) 90 mm Cutting range +60° rectangular horizontal (solid material) 120 x 90 mm Explanation of cutting range: Cutting range determined based on the weight of the saw frame with aluminum. May vary depending on the material used and may be smaller (not cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base Coolant pump Location: From stock 54634 Bitburg - available immediately -

Condition: good (used), Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm Crjdpfx Adoxlzytjaei -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Year of construction: 2014, operating hours: 5,900 h, condition: ready for operation (used), General Data Measurements width 3100 mm Measurements depth 1850 mm Measurements height 2600 mm Codpsxp Stxjfx Adajri Machine weight 2800 kg This Behringer HBP 410-723 G Metal Band Saw was manufactured in 2014. It features an automatic feed and discharge system, with a working area capacity up to 700 mm x 400 mm. Operating for approximately 5,900 hours, it supports a cutting speed of 20 – 140 m/min and is powered by a 4.0 kW saw drive. Consider the opportunity to buy this Behringer HBP 410-723 G Metal Band Saw. Contact us for more information about this machine. Application Types Sawing

Condition: excellent (used), Year of construction: 2006, Model: H-460A Year: 2006 Round Capacity: 460mm Rectangle Capacity: 480 x 460mm Fixed Blade Speeds: 25,32,42,55,70,80 m/min Machine with: Csdpfx Asw Nq Ehodaeri Blade Speed Readout Powered Swarf Brush

Condition: new, Year of construction: 2025, Schnittbereich rund: 660 mm Schnittbereich quadratisch (B x H): 700x660 mm kleinste zu schneidende Größe: 30 x 30 mm Einspannbereich: 20 - 700 mm Bündelschnittbereich (Min.B x H - Max. B x H ): 30 x 30 - 700 x 660 mm Kürzeste Länge des abgeschnittenen Stücks : 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 20 mm Length: 3150 mm Breite inkl. Späneförderer : 4300 mm Height: 3080 mm Höhe der Materialauflage: 895 mm Crodpsxrutysfx Adaji Weight of machine approx.: 6400 kg Electrical connected load: 17,8 kW Leistung des Sägemotors: 11 kW Leistung hydraulischer Motor: 2,2 kW Schnittgeschwindigkeit stufenlos regelbar: 20 - 90 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 1000 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 8100 x 64 x 1,6mm mm

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Crjdpfx Asxrg E Isdaei Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost.

Condition: new, Year of construction: 2025, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cedpfx Ajv Sg T Nsdaori Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. Cjdpfx Asdy Hm Nedaori 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Year of construction: 2004, operating hours: 15,800 h, condition: ready for operation (used), General Data Machine weight 3000 kg Credpfx Aexpymmedaoi This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine. Application Types Sawing

Condition: used, Parts for PMC 12 - or - for LKH 310 - Clamping elements - Saw blade guiding elements Crjdexf H Ucjpfx Adaoi

Condition: used, workpiece length 3000 mm roll diameter 50 mm Codpfx Adjxmkzvjaeri work piece width 300 mm Roll lenght 210 mm Height 800 bis 1100 mm No. - Rolls 12 dimensions of the machine ca. 3 x 0,33 x 0,55 m Unused discharge conveyor with foldable stop and prepared for mounting a measuring scale = 1150,--. Unused feeding roller conveyor with two feet Photo 5-7, price 850, - (2 pieces available). Machine dealer with own stock of 2500 m².

Condition: good (used), Year of construction: 1992, functionality: unexamined, power: 16 kW (21.75 HP), empty load weight: 5,880 kg, Brand: Kasto Model: HBA 660 AU Year of Manufacture: 1992 Serial Number: On request Capacity (kW): 16 Voltage: 380 Frequency (Hz): 50 Weight (kg) approx.: 5880 Quantity in stock: 1 Crsdpfx Ajxivgpjdaei Max. turning diameter (mm): 660 Made in: Germany Comments: Dismantled in working condition, incl. chip conveyor Terms of sale: As is / where is

Condition: new, Year of construction: 2025, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Credpfsd Hx Uqjx Adasi

Condition: excellent (used), Year of construction: 2023, saw blade diameter: 460 mm, cutting height (max.): 146 mm, TECHNICAL SPECIFICATION .. max. diameter of saw blade: 460 mm .. cutting capacity round: 146 mm .. cutting capacity square: 138 mm .. mitre cutting: no .. .. oblong: 250 mm .. .. .. x: 100 mm .. .. to: 220 mm/min Credpfxsxryqks Adaoi DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2200 mm .. space requirements -front/back-: 1950 mm .. total height: 2000 mm .. total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

Condition: good (used), Year of construction: 1996, Metal saw KNUTH HBE 280 - machine in stock - German production - year of production 1996 TECHNICAL SPECIFICATIONS: - engine power 1.2 kW - belt speed 21/28/42/62/84 m / min - two tape guides - cutting angle adjustment - cutting capacity 0 ° - round 280 mm - cutting capacity 45 ° - round 240 mm - cutting speed - without steps 20 - 100 m / min - belt cooling - the stepless movement of the hydraulic saw ensures optimal cutting results and minimizes tool wear Machine dimensions: - length 200 cm - width 100 cm - height 130 cm Credohcit Ijpfx Adaji - weight ~ 500 kg

Condition: good (used), Year of construction: 1993, machine/vehicle number: 116400, Offer 25358 Technical Specifications: - Saw blade diameter up to 400 mm - Cutting capacity at 90° up to: round 130 mm square 120 mm flat 305 x 40 mm or 240 x 85 mm - Mitre adjustment left & right 0 – 90° at 45°: round 130 mm flat 245 x 30 mm or 180 x 70 mm - Infinitely variable saw blade feed rate: 0 – 10 m/min - Saw blade cutting speed: 13 / 26 m/min - Saw drive: 400 V / 1.7 / 2.6 kW Crodpfx Adextnrfsaji - Hydraulic drive: 400 V / 0.75 kW - Hydraulic workpiece vice with infinitely adjustable clamping pressure - 2 pcs. horizontal hydraulic material clamps - Handwheel for fine adjustment - Adjustable backstop - Coolant system - Discharge roller conveyor with length stop: 3,000 mm - Feed roller conveyor: 3,000 mm - Required space approx. W 800 x H 1770 x D 1020 mm - Weight approx. 950 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Control Kasto total power requirement 30 kW weight of the machine ca. 11,6 t dimensions of the machine ca. 4800 x 2600 x 2870 mm Additional information Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Cjdpexlpwajfx Adaori Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Weight 2000 kg Chip conveyor

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, saw blade diameter: 200 mm, Fully automatic metal circular saw for burr-free cuts and high sawing performance in thin-walled material Manufacturer: Rohbi Series: RKA-86 Control system: Siemens Year of manufacture: 2007 Origin: Switzerland technical data: ----- - High-speed spindle for saw blade 500 - 3,900 rpm (2.0 kW) - Clamping cylinder pneum. 2.000 N Crsdpfetxlxujx Adaei - Cutting range round solid material with HSS saw blade: 2-60 mm - Cutting range profiles solid material with HSS saw blade: 60x40 mm - Cutting range round pipe material with HSS saw blade: 2-70 mm - Cutting range profile material with HSS saw blade: 80x40 mm - Material feed carriage max. stroke: 1,250 mm Drive via gear wheel / gear rack - Clamping vice clamping: hydraulic - Minimum quantity lubrication - Saw blade dimensions: 100 - 200 mm (HSS or solid carbide) - Saw blade monitoring via load pick-up - Chip removal via external extraction possible - Material removal via retracting chute - Weight: 900 kg Accessories: ----- - Operating instructions - 3x sets of clamping jaws with drawings

Year of construction: 2021, condition: used, functionality: fully functional, Other Mast type: None Technical condition: New Description: Euro pallets: 1200 x 800 x 150 mm Load capacity: 15 pallets PLC control: Siemens S7-1200 Electric linear drive system: Linak Color: RAL 3002 red Including safety barrier and forklift protection Cjdpfx Aovdvycjdaeri

Condition: good (used), Year of construction: 1998, cutting diameter 320 mm saw band length 5400 x 34 x 1.1 mm capacity 90 degrees: flat 500 x 300 mm capacity 45 degrees: round 300 mm capacity 45 degrees: flat 300 x 300 mm capacity 60 degrees: round 130 mm capacity 60 degrees: flat 130 x 250 mm clamping range 0 - 500 mm clamping height 20 - 320 mm 300 Single stroke - automatic 0 - 600 mm Multiple stroke - automatic 0 - 9999 mm Remaining piece length ca. 75.0 / 155 mm min. dia. Ø 5.0 mm work height max. 750 / 830 mm down speed 0 - 300 mm/sec workpiece weight max. 250 kg/m coolant capacity 120 l cutting pressure 10 - 30 bar Control SIEMENS total power requirement 5.5 kW AC weight ca. 3000 kg range L-W-H 2800 x 2600 x 2200 mm in good conditions Cedpfx Aoxiyzdodaeri with lots of special accessories (!!) Features: - Robust, fully automatic electro-hydraulic miter band saw (INDUSTRIAL) - For angles up to 60°, with ball-bearing rotary table - Electric motor angle adjustment * Stepless adjustment of the miter angle - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Infinitely adjustable clamping pressure - Infinitely variable speed adjustment of the saw blade - Manual & automatic sawing process selectable - Coolant device + minimum quantity spray device (oil cooler) - Operating instructions for machine + control system * Special accessories included: - Electro-hydraulic bundle clamping device - 2x electro-hydraulic vertical clamping device - Roller conveyors - Electro-motor miter angle adjustment - Minimum quantity spray device (oil cooler)

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1500 01025, saw blade diameter: 400 mm, total height: 1,700 mm, total width: 1,100 mm, overall weight: 700 kg, type of input current: three-phase, cutting diameter: 130 mm, space requirement height: 2,000 mm, space requirement length: 900 mm, space requirement width: 1,200 mm, length stop: 6,000 mm, Kaltenbach KKS400E cold circular saw, year of manufacture approx. 1980–1982, fully functional, can be inspected under power. Incl. outfeed roller conveyor with 6000 mm length measuring device. Cutting range at 90°: D130 or 120x120 mm, flat material 315x40 mm. Crodpswx Nn Iefx Adaoi

Condition: used, Year of construction: 2009, machine/vehicle number: 150006, Offer 25301 Technical Data: - Cutting capacity at 90° round: 280 mm - Square: 280 x 280 mm - At 45° round: 240 mm Crsdextmzljpfx Adaei - Square: 210 x 210 mm - Saw band dimensions: 3400 x 27 x 0.9 mm - Infinitely variable cutting speed: 20 to 100 m/min - Hydraulic raising and lowering of the saw frame - Infinitely variable cutting pressure adjustment: 0 to 10 m/min - Total drive power: 400 V / 1.7 kW - Coolant system - Stop - Required space approx.: W 900 x H 1100 x D 1800 mm - Weight approx.: 550 kg

Year of construction: 2005, condition: ready for operation (used), A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment. Cedsxtpq Aspfx Adaeri

Condition: good (used), functionality: fully functional, cutting length (max.): 600 mm, pivoting range: 20,135 °, For sale: 1 used double mitre saw Cjdpfoxrag Esx Adajri Manufacturer: Hebö Maschinenfabrik Model: unknown Year of manufacture: unknown Saw blade diameter: 500 mm Processing length: up to 600 cm Mitre angle: 20 - 135 degrees Control system: see picture The machine can be inspected at our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 2012, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm Codpfx Ajxiyzksdaeri capacity 45 degrees: flat 240 x 150 mm capacity 45 degrees: round 240 mm capacity 60 degrees: flat 150 x 180 mm capacity 60 degrees: round 150 mm turning speed range: 35 + 70 m/min saw band length 3100 x 27 x 0.9 mm weight of the machine ca. 540 kg range L-W-H 1800 x 950 x 2100 mm Features: - Robust electro-hydraulic band saw (INDUSTRY) - Large mounted rotary table * For miter cuts from 45° left to 60° right - Automatic saw frame lowering * With continuously adjustable feed * End stop at end of cut - 2x saw blade speeds - Manual vice clamping - Control panel - front right - Coolant device - Operating instructions in German