Used veneer presses for sale (143)

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm oil heating hollow steel shelves 8 hydraulic cylinders cylinder diameter: 85 mm pump motor power: 2.2 kW heater power: 18 kW Dedo Airb Sopfx Aizewd total pressure: 160 tons clearance between shelves: 450 mm year of manufacture: 2008 CE marking mylar film on the shelves automatic shelf opening - timed safety switch external dimensions: 3600x1700x2250 mm

Condition: used, Technical specifications: Number of pistons: 2 Piston diameter: 100 mm Shelf dimensions: 1000 x 2500 mm Clearance: 400 mm Hydraulic clamping Engine power: 3 kW Power supply: 380 V Dwodpfx Ao Airgdeizod Overall dimensions: Length: 2900 mm Width: 1200 mm Height: 2000 mm

Condition: ready for operation (used), Year of construction: 1980, Höfer H65S heating plate press Disassemblable design Heating power with energy-saving mode: 7.8 kW, normal: 15.6 kW Dwsds Ahyycopfx Aizod Pressing area: 2500 x 1300 mm Operating pressure: max. 65 tons 4 cylinders Space requirement: 2890 x 1460 x 1650 mm Year of manufacture: 1980

Condition: good (used), Year of construction: 1980, functionality: fully functional, total length: 2,980 mm, total width: 1,530 mm, total height: 2,100 mm, Equipment: documentation/manual, We are offering this used Joos HP 90 veneer press, manufactured in 1980. Dodpfxs Agb Nbe Aizjwd Joos HP 90 hydraulic veneer press with electric combination heating plates. For sale is a well-maintained veneer press with the following specifications: - Press area: 2.55m x 1.35m - Height of press chamber: 0.4m - Operating pressure: 355 bar - Overall dimensions: 2.98m x 1.53m x 2.1m - Manufacturer: Joos - Model: HP 90 - Year of manufacture: 1980 - Machine type: Veneer press - Press area: 255 x 135 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1990, Langzauner LZT 90 Pressing area: 2500 x 1300 mm Dwedpfxs Ahyvvs Aizsd Opening width: 400 mm Number of press cylinders: 6 Total pressing force: 90 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.0 kW Space requirement (L x W x H): approx. 3000 x 1500 x 1950 mm Weight: approx. 3800 kg Hydraulic heating plate press with bottom cylinder design Pressing pressure can be continuously adjusted by means of a pressure control unit Two-stage hydraulic pump with automatic changeover valve from low to high pressure Central control panel at the front Rack-and-pinion compensation for uniform closing Safety pull cord Opening automation Stroke limitation

Condition: ready for operation (used), Year of construction: 1990, Ott 2513, Heavy-duty Veneer Press 4 cylinders Pressing area: 2500 x 1300 mm Heating: electric Opening and closing: electric Pressing force: 90 tons Year of manufacture: 1990 Price: 6,500.- Djdpfx Ao Ahx Ucoizswd

Condition: good (used), Year of construction: 1983, functionality: fully functional, THOROUGHLY CLEANED AND REPAINTED MACHINE Working width 1,300 mm Roller diameter 149 mm Feed rate 22 m/min Djdpfx Ajzxr Uhoizowd Max. pass height approx. 100 mm Mobile version with 2 rollers on the rear machine frame Connection data: 400 V, 50 Hz, 3-phase, N

Condition: used, Year of construction: 2019, LANGZAUNER LZT 70 – hydraulic veneer press, manufactured in November 2019. - Four press cylinders - Pressing force: 70 t according to the manufacturer's brochure - Press plate size: 2,500 × 1,300 mm according to the manufacturer's brochure for LZT 70 - Electric plate heating - Connection: 3 × 400 V + N + PE, 50 Hz Dwsdpfxs Ahzqws Aized - Connected load: 19.3 kW according to the nameplate Collection possible from December 15, 2026, at the latest by February 28, 2027. Inspection by appointment. Disassembly, loading, and transport upon agreement. Price upon request.

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Djdpfx Ajymmgijizewd Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Condition: used, Technical specifications: Dwodpfx Ais Ah Ed Ijzod Throughfeed press with automatic loading and unloading function + integrated shelf heating. Number of cylinders: 6 Cylinder diameter: 70 mm Optional connection to central heating system Integrated heating power supply: 4 x 12 kW heaters Shelf dimensions: 1900x3000 mm Clearance: 130 mm Hydraulic clamping Safety switch Motor power: 2 kW Power supply: 400 V Two tables – loading/unloading Dimensions: 3300x2500 - belt conveyor with 1 kW motor 3300x2500 - roller conveyor Overall dimensions: Length: 11000 mm Width: 4000 mm Height: 1800 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Programmable control, heated platens, Dwjdpfx Ajz Rn Sfoizod 8-cylinder hydraulic pressing system. Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition!

Condition: used, Technical specifications: Dwodpfxe Ah Ehyj Aizsd Number of pistons: 4 Piston diameter: 40 mm Shelf dimensions: 1100x2500 mm Clearance: 400 mm Hydraulic clamping system Safety switch Motor power: 2 kW Power supply: 380 V Overall dimensions: Length: 2800 mm Width: 1380 mm Height: 1640 mm

Condition: ready for operation (used), OTT Model JU 2510 Dodo Ahytlopfx Aizswd Hydraulic veneer press with electric heating plates Under-plunger design Central control panel with all operating elements Analog temperature display for both heating plates Press pressure can be adjusted continuously by means of a pressure switch Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Safety pull cord Rack-and-pinion compensation Pressing area 2500 x 1100 mm Number of press cylinders 4 Total pressing force 70 t Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 20.3 kW Space requirement (L x W x H) approx.: 2960 x 1240 mm Weight: approx. 2900 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, plate length 3000mm plate width 1300mm oil heating with electric heater 6 hydraulic pistons pistons diameter 85mm plates span 650mm Dwedpez D Afrsfx Aized pressure 3kg/cm2 pump motor power 2,2kW

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 21370-07-1268, functionality: fully functional, Available from April 1, 2027, for self-dismantling and self-collection. Langzauner heating press / veneer press, type LZT 100-SF, manufactured in 2007. The machine is suitable for pressing and gluing sheet materials, veneers, and comparable workpieces. It features heated press surfaces and a hydraulic pressing device. The upper and lower heating elements can be switched on separately. Technical data • Manufacturer: Langzauner • Type: LZT 100-SF • Year of manufacture: 2007 • Factory number: 21370-07-1268 • Heating: upper and lower heating • Temperature display: separate for top and bottom • Pressing time: adjustable • Opening time: adjustable • Automatic opening: available • Electrical connection: 3 × 400 V + N • Frequency: 50 Hz • Rated current: 42.2 A • Connected power: approximately 27 kW according to the nameplate Dwodpfsz Dai Ujx Aizod • Hydraulic press with 6 press cylinders • Safety cable / safety device • Press surface heating plates in top condition, no damage • Heating plate size: 3,000 × 1,300 mm • Max. press opening / stage clearance: 400 mm • Total pressing force: 100 tons • 6 press cylinders • Electric heating plates

Condition: used, Year of construction: 2019, machine/vehicle number: 197341119, input voltage: 400 V, input frequency: 50 Hz, pressing force: 120 t, table width: 1,400 mm, table length: 3,200 mm, ITALPRESSE XL/8-S – Thermoil-heated platen veneer press Year of manufacture: 2019 Machine number: 197341119 Press area: 3,200 x 1,400 mm Pressing force: 120 tons Heating: Thermoil with electric boiler Electrical connection: 400 V / 50 Hz Hydraulic veneer press with control unit and hydraulic unit, as shown in the photos. Press area and pressing force according to the delivery note; year of manufacture and machine number according to the nameplate. Location: Basel area, Switzerland. Inspection possible until early December 2026 by appointment. Dismantling and removal between December 8th and 18th, 2026, after coordinating a schedule. Djdpfx Aio Agxfgszowd Price upon request. Scope of delivery and current operating condition to be agreed upon. Subject to change and errors.

Condition: used, Year of construction: 1992, Veneer press Manufacturer: Joos Type: HP80 Year of manufacture: 1992 Technical data Djds Aigluepfx Aizewd Press area: approx. 2,500 x 1,250 mm Total pressing force: approx. 80 t Specific pressing pressure: approx. 2.4 - 2.5 kg/cm² Number of hydraulic cylinders: 4 Cylinder diameter: 80 mm Press opening: approx. 400 mm Number of levels: 1 Heating plates: Aluminum, electrically heated Heating temperature: up to approx. 120 °C Main motor: approx. 1.1 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, operating speed: 50 mm/s, table width: 1,300 mm, table length: 4,200 mm, ram plate width: 1,300 mm, ram plate length: 4,200 mm, distance table to ram: 300 mm, total length: 14,090 mm, total width: 2,600 mm, total height: 2,380 mm, overall weight: 13,000 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, The QIULIN BY624×14/20 industrial hydraulic press is designed for pressing and gluing flat components, veneer pressing, and the production of furniture and door elements. It features a single-platen design with two heating plates. The heating is electric, using thermal oil, with separate temperature control for the upper and lower plates. TECHNICAL SPECIFICATIONS – CATALOG DATA: – Brand: QIULIN – Model: BY624×14/20 – Country of origin: China – Type: hot hydraulic press – Pressing force: 2000 kN, 200-ton class – Number of working platens: 1 – Number of heating plates: 2 – Length of working plates: 4200 mm – Width of working plates: 1300 mm – Plate thickness: 52 mm – Maximum press opening: 300 mm – Unit pressure: 3.7 kgf/cm², approximately 0.36 MPa – Working temperature: from ambient temperature to 120°C – Total installed power: 79.35 kW – Plate closing speed: 50 mm/s – Heating: electric with thermal oil – Separate temperature adjustment for both plates – Automatic plate opening – Semi-automatic operation EQUIPMENT VISIBLE IN THE PHOTOS: – Robust frame construction – Hydraulic cylinder assembly – Hydraulic power unit – Separate control panel – Conveyor belt and table for material feeding and removal CATALOG DIMENSIONS OF THE UNIT: – Length: 14,090 mm – Width: 2600 mm – Height: 2380 mm – Weight: approximately 13,000 kg Used machine, as shown in the photos. Dedpfx Aez Ix Aujizowd Paid transport can be arranged. Please contact us for details. JBS Woodworking Machinery WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), Shelf length: 250 cm Shelf width: 130 cm Clearance: 40 cm Dedpfx Ais Ag Emhszswd

Condition: excellent (used), functionality: fully functional, plate length 3500mm plate width 1300mm two inserts Dwedpfsz D Afxjx Aizsd water heating - needs to be connected to heater 8 hydraulic pistons pistons diameter 85mm span between plates max 460mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Shelf length: 3000 mm Dwedpfxjzfgare Aizod Shelf width: 1300 mm 6 hydraulic cylinders, 75 mm Clearance: 400 mm Water heating Year of manufacture: 2001 Weight: 3200 kg Overall length: 440 cm Overall width: 190 cm

Condition: used, Year of construction: 1998, Complete line Sign press oil Power 31 kW 250/130 cm Press entry and exit automation Ejector to die-head? Actually 'moulurière' refers to 'molder' or 'moulding machine'. 'Ejecteur vers moulurière par exemple' -> 'Ejector towards a moulding machine, for example' Glue applicator ORMA SC2R-300 at press entry 380 V Djdpfx Aioz Dfyfozjwd Available immediately

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 – Robust Veneer Press 4 cylinders Pressing area: 2500 x 1300 mm Heating: electric Opening and closing: electric Dodsx Dzvxjpfx Aizewd Pressing force: 90 tons Pressing plates: Goldeloxal coated Year of manufacture: 1994 Price: 7,500.-

Condition: excellent (used), Year of construction: 2018, Veneer press, OMC Type PL 105 30/13 Year of manufacture: 2018 Dsdpszx Sh Usfx Aizowd Dimensions: 3000 x 1300 Piston diameter: 6 x 85 3.2 kg/cm2 Weight: approx. 3300 kg

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards Dwedeyxp Twspfx Aizjd The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.