Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. Rbodpfx Ajgvkfyjfbet The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW Rbodpfsgvkgtjx Afbet The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Redpfegvkk Nox Afbebt Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Year of construction: 2021, condition: used, KR Quantec 6-axis robot incl. KRC4 controller and robot control panel 12m Smart Pad, 3100mm reach, 20kg payload External axis module for coupled rotary axis, mathematically coupled Kuka ArcTech Basic Package + Level 2 advanced TouchSense technology to minimize component tolerances Rbedpfewgn Dwox Afbot Kuka Wiresense module During oscillation, the voltage is measured by the power source and thus, in the event of component distortion, the welding path is shifted. * Function only for fillet welds Includes Lorch S5 SpeedPulse XT welding machine Includes automatic torch cleaning station *Cutting device *Milling cutter *Welding separation spray

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table Rbodpfxoh Evt Uo Afbet - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: used, length 850 mm height 1050 mm total power requirement 18,4 kW weight of the machine ca. 200 kg dimensions of the machine ca. 850 x 450 x 1050 mm Water-cooled welding machine Technical data: Adjustment range [A] 30-500 Duty cycle (ED) at Imax. (10 min) [%] 60 Welding current at 100% ED [A] 390 Rbedpfxjvx Uz Uj Afbot Mains connection [V] 3/PE 400 Continuous power at 100% duty cycle [kVA] 23 Fuse protection (slow-blow) [A] 32 Protection class IP 23 Wire diameter steel and stainless steel [ø mm] 0.6 - 1.6 Wire diameter aluminum 1.0 - 1.6 Equipment: - Pressure reducer - Ground cable - Basket coil adapter Welding machine is equipped with 1.0/1.2 mm wire feed rollers

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm Rbsdogvkc Tepfx Afbst weight of the machine ca. 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm Rodpfegvkf Dex Afbjbt - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X

Condition: new, 0,6 t Rodpsgvq Hlefx Afbsbt -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided

Year of construction: 2020, condition: as good as new (ex-display), current capacity 25 kVA number of controlled axis 6 workpiece weight 10 kg weight of the machine ca. 1550 kg Year of construction 2020 demonstration machine, as new Easy ARC 01.02 FD-B6 Welbee P500L welding robot station MIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6 with welding table 2000x1200mm Hole diameter 28 mm The mobile welding cell for the craft business Setting range MIG / MAG 20 - 500 A Steplessly adjustable switching levels Rbodpfxexcuwgs Afbet Duty cycle at rent 40 ° C 50% Current at 100% ED 40 ° C 410 A Wire feed speed 0 - 22 m / min

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Rbedpoyay H Ajfx Afbot Manufacturer: Microstep Model: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source incl. Optimix gas console 1 x drilling spindle 26 kW up to 40 mm diameter, incl. 8-position tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting software at the CNC control 20126 Availability: May 2026

Condition: used, Year of construction: 2022, type of input current: AC, input voltage: 230 V, input current: 6 A, input frequency: 60 Hz, We are offering this used Swift-Cut Pro 3000 plasma cutting machine, year of manufacture 2022. Rbedpfx Afeycv Unjbst Model: Pro 3000 Serial number: PRS-3000-07221520 Voltage: 110–230 V AC Frequency: 50–60 Hz Current: 6 A Phases: Single Year of manufacture: 2022 If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2016, number of axes: 6, This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum load capacity of 15 kg, a workstation reach of 3400 mm, and advanced V6 control. Equipped with a 450A Qineo Pulse A welding machine, it ensures precise and efficient welding. The robot includes a touch sensor and an arc sensor for enhanced accuracy during operations. Consider the opportunity to buy this CLOOS QRC 350 QIROX welding robot. Contact us for more information about this machine. Additional equipment • Premium control panel with wall bracket and cable holder • External gas cleaning device • Adjustable electro-pneumatic valve • Wire feed equipment Machine Benefits Technical Machine Benefits • Built-in welding interface and software • Protective tube for wire transfer • High usability with movable counter-side support Rbsdpfx Aoyaliisfbet • Workstation: 3400 mm • Longitudinal track travel speed: 1. 8 m/sec • Longitudinal track travel length: 7000 mm • Qineo touch sensor: 60 v • Arc sensor for welding path adjustment Extra Information Includes standard height robot stool and computer connector for enhanced usability. Control Unit Control: V6 Advanced Digital inputs and outputs: 16 USB connectors: 2 Connectivity: Expandable up to 16 axes, CAN-Bus, serial interfaces

Condition: used, Plasma Cutting Unit HYPERTHERM Type Max 100 Machine No. 70-2513 Year of manufacture: 1990 Output: 100 Amps = 80% duty cycle 89 Amps = 100% duty cycle Cutting capacity up to 32 mm sheet thickness Stepless adjustment range Rbsdpfjyah Sasx Afbjt Torch hose package length: 22 metres Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 63 Amp. plug - Torch hose package with straight torch, without switch, for robotic operation - Separate pushbutton switch to start the plasma cutter Required space (L x W x H): 850 x 700 x 1100 mm Weight: 225 kg Good condition

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length Rbedpfxoyah R Ns Afbjt - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: used, This orbital welding system, model: ST-95 Tesch, will be auctioned online in our industrial auction / machinery auction (follow-up auction) due to the building relocation of Siemens Erlangen – including laboratory equipment, electrically height-adjustable desks, office chairs, and technology. Rbodpjydbk Dsfx Afbjt

Condition: used, Diesey Peco Welding - spot welding machine, type: MHZ, will be auctioned in our industrial auction / machinery auction (follow-up auction due to Siemens Erlangen building relocation – laboratory equipment, electrically height-adjustable desks, office chairs, technology), online. This and many other items are available on our platform. Rbjdpfx Aoyda Afefbst

Condition: used, This INVERTER ARGO - TIG welding machine, model: MARK II 300P, is being auctioned in our industrial auction / machinery post-sale auction due to the Siemens Erlangen building relocation – laboratory equipment, electrically height-adjustable desks, office chairs, technology, online. You will find this and many other items on our platform. Rjdpeydau Uofx Afbsbt

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 15,907 h, Table length: 3000 mm Table width: 1500 mm Laser power in watts: 3000 Control unit: B&R APC 910 Connected load: 33 kVA Approx. machine weight: 7,800 kg Control unit ON counter: 2,472 h Operating hours: 15,907 h Laser ON counter: 32,927 h Laser ON: 7,790 h Special Edition Equipment - Integrated solid-state laser TruDisk 3001 with 1 LLK output - Fully automated pallet changer (with light barrier) Standard Machine Equipment - Enclosed machine frame with integrated components - Motion unit for ultra-precise machining - Drives with maintenance-free three-phase servo motors - Sheet support accessible from both sides - Enclosed beam guidance via laser light cable (LLK) - Fully integrated cooling unit for laser and machine - Integrated control cabinet Rbjdpfx Ajyffmxefbot - Accompanying extraction system - Slag drawers - 19" touch color display - Power supply TruDisk via machine - Work area lighting - Positioning laser diode - PierceLine - FocusLine - NitroLine - Transport and assembly device - Copper cutting kit (includes cutting data) - Brass cutting kit (includes cutting data) TRUMPF Laser - LLK as per standard layout (laser directly beside machine) - Excitation via pump diodes - Laser power control - Laser logbook function Cutting Head - Universal cutting unit - Single-head cutting strategy - Protective glass for lens protection - ControlLine: height regulation and detection of sheet metal edges Control System - Simple drawing module - Easy workshop programming - Fast repeat production - Control B&R APC 910 - Integrated TRUMPF technology data - Automatic shut-off - Programmable cutting gas/pressure selection - ContourLine - FastLine - Microweld - Teleservice via internet - Microjoint - operation via control panel - Adjustable dynamics Data Transfer - RJ45 network connection and USB interface Safety - CE marking - Compact dust extraction unit - Machine enclosure with certified viewing windows - Motorized front door and rear opening - Enclosed machine roof

Condition: used, Year of construction: 2008, CNC gantry plasma cutting machine with oxy-fuel Manufacturer: ESAB Model: SXE P1 4500 Year of manufacture: 2008 CNC control 3 oxy-fuel torches 1 plasma torch with Kjellberg HiFocus 160i power source Rbodpfsyc Nclex Afbjt Without table and filter! 25126

Condition: good (used), Ground cable for shielding gas device, electrode device -Length: 8 m Rsdex R S Alepfx Afbebt -Version: Dinse plug, gas hose, control cable, -Cooling: Water-cooled -Weight: 24 kg

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine Rbodpfegu Nmhex Afbot

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: MicroStep, This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information. Additional equipment Rjdpfxsyaiy So Afbobt • 4kW IPG YLS laser source • Donaldson extraction and filtration equipment • Automatic layout planning software for flat sheets Machine Benefits Technical Machine Benefits • 3m x 1. 5m cutting table with hydraulic pallet changer • Highyag cutting head for perpendicular cutting only Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2016, This MicroStep Fiber MSF 4001.20L was manufactured in 2016. It features a 4m x 2m cutting table with hydraulic pallet changer, an automatic feeding tube cutting system for tubes up to 200mm diameter and 6m length, and a 4kW IPG YLS laser source. Includes Donaldson extraction and filtration equipment. Consider the opportunity to buy this MicroStep Fiber MSF 4001.20L fiber laser cutting machine. Contact us for more information. Additional equipment • Donaldson extraction and filtration equipment Rjdpfxeyaiy Es Afbjbt • Automatic layout planning software for flat sheets • Tube cutting layout planning software Machine Benefits Technical Machine Benefits • 4m x 2m cutting table with hydraulic pallet changer • Automatic feeding tube cutting system, up to 200mm diameter and 6m tube length • 4kw ipg yls laser source • Highyag cutting head for perpendicular cutting only Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,000 mm, travel distance Y-axis: 8,000 mm, This 5-axis AJAN PP 260 A-5T plasma cutting machine was manufactured in 2015. It features a robust AJAN PP260A power source with a cutting capacity of up to 65 mm for mild steel and 50 mm for stainless steel and aluminum. The large working area spans 2000 mm by 8000 mm, and it includes an AJANCNC 952 Controller for precise control. Consider the opportunity to buy this AJAN PP 260 A-5T plasma cutting machine. Contact us for more information. Additional equipment Rbedpfxsyaiyxo Afbot • Cutting Gases: O₂, N₂, F5, H35 / Table Ventilation: Mechanical valve with JET filtration system/ Optional Features: Oxy-fuel torch, pipe cutting unit, industrial fume extraction system Machine Benefits Technical Machine Benefits • Cutting capacity: mild steel: up to 65 mm/ stainless steel: up to 50 mm/ aluminum: up to 50 mm • Piercing capacity: mild steel: 40 mm /stainless steel: 25 mm /aluminum: 25 mm • Max. Positioning speed: 15 m/min • Positioning accuracy: ±0. 01 mm • Number of axes: 5 (with bevel cutting capability) • Control system: linux-based / software: ajancad and ajancam v7. 0