Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display Iedpfxoxabm Ne Afhsbb

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg Ibsdpfx Afsxflftjhob dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 2400x1200x200 mm, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product description - Table dimensions: 2400x1200x200 mm - High-quality S355J2 steel with plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole diameter 28 mm - Drill holes in 100x100 mm grid - Corners, edges, and drill holes chamfered at 45° - Side panel height 200 mm - Drill holes in side panels in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / Dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version - Includes 4x base feet (basic configuration) - Includes accessory set (see Image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The newly developed filtoo filter unit from TEKA is a mobile filtration system suitable for a wide range of applications involving the filtration of fumes, Isdpfxoxaal Re Afhjbb dust, and gases. It is also suitable for high-alloy steels (stainless steel). The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA ( formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%). Where can the SIG 230 filtoo be used? - at welding workstations - in workshops - for soldering applications - by restorers - in metalworking shops Features: - BGIA-certified extraction and filtration system . IFA 1005030 for extraction . from high-alloy steels Steels & Non-ferrous Metals - Operating instructions in German Optional equipment available at extra cost (recommended) - STAVO retrofit kit (dust pre-separation) - For FILTOO with spark guard and collection tray Note: - This unit is only used for extracting dry dust/fumes - Read the operating instructions before initial use

Condition: new, cutting range for steel to 12.0 TS mm Ibjdpfx Afjw U U Tgehjb cutting range for steel to 8.0 QS mm capacity at 100% 30.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere output Eingang 4.9 KW voltage 230 V weight 17.9 kg range L-W-H 480 x 210 x 340 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut-off cut for carbon steel . 12.0 mm Optimum cutting thickness carbon steel .. 8.0 mm Stainless steel .. 8.0 mm Aluminum .. 4.0 mm Copper .. 3.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, cutting range for steel to 35.0 TS mm Ibsdpsxaaicefx Afhob cutting range for steel to 25.0 QS mm ampere 20 - 65 Ampere cutting medium Druckluft voltage 400 V output Eingang 7.8 KW weight 51.5 kg range L-W-H 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The Avalon 65 AIR air plasma cutting system with integrated compressor compressor is your reliable partner for demanding applications. use. With the Avalon 65 Air, you can make cuts up to a material thickness of material thickness of 35.0 mm. Features : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc characteristics - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch for activating the air flow to set the test air pressure . without having to trigger the torch - Intelligent protection function protects the plasma torch . from damage such as incorrect air pressure missing wear parts , . overloading of the pilot arc. * max. cutting thickness carbon steel = 35.0 mm (separating cut) * Optimal cutting thickness carbon steel = 25.0 mm (quality cut) * Stainless steel = 25.0 mm * Aluminum = 20.0 mm * Copper = 14.0 mm Special equipment included : - 1x 3.0 m / ground cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, cutting range for steel to 15.0 TS mm cutting range for steel to 10.0 QS mm capacity at 100% 25.0 Ampere cutting medium Druckluft Isdpfx Afsxaavcjhebb output von 20 - 40 Ampere voltage 230 V Air consumption 230 l/min. output Eingang 4.9 KW weight 8.0 kg range L-W-H 505 x 147 x 305 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut for carbon steel .. 15.0 mm Optimum cutting thickness carbon steel .. 10.0 mm Stainless steel .. 10.0 mm Aluminum .. 6.0 mm Copper .. 5.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, table length unterschiedlich mm table width unterschiedlich mm table height (lateral area) unterschiedlich mm weight ca. 240 kg Description : - SPECIAL SET for SIEGMUND 28er clamping tables - ORIGINAL SIEGMUND accessories (!!) Ijdpfx Afoxabvdohjbb included in the scope of delivery : - 1x 280910 .. 28 mm - mobile tool trolley incl. rollers - 8x 280410.N .. Universal stop 150 L nitrided - 4x 280420.N ... Universal stop 225 L nitrided - 2x 280162.N ... Stop and clamping bracket 500 G left nitrided - 1x 280166.N ... Stop and clamping bracket 750 G left nitrided - 1x 280167.N ... Stop and clamping bracket 750 G right nitrided - 1x 280164.N ... Stop and clamping bracket 500 G left nitrided - 1x 280165.N ... Stop and clamping bracket 500 G right nitrided - 4x 280152.N ... Stop and clamping bracket 300 G left nitrided - 16x 280610.N ... Professional screw clamp, nitrided - 6x 280630.N ... Professional screw clamp 45°/90° nitrided - 8x 280651.1.N .. Prism Ø 60-135° nitrided - 8x 280110.N .. Stop and clamping angle 175 L nitrided - 30x 280511 .. Quick-action clamping bolt, double without groove, burnished - 4x 280430.N .. Universal stop 500 S nitrided - 1x accessory set consisting of: - Eccentric, Allen key, brush, - further accessories such as: Probe CleanBasic, Probe Anti-Stick and torch holder

Condition: new, Year of construction: 2025, Laser Cutting Machine Ibjdpfez Aku Uox Afheb Type DX1530FL Capacity 1500 x 3000 Power 3Kw MAX Fiber Laser Laser Head RAYTOOLS BM110 Precision grid for XY axes YYC High-speed servo motor and drive INNOVANCE High-precision linear guide (bearing) H-WIN Precision ball screw (Z-axis) TBI Control System RAYTOOLS XC-3000 Gearbox Electrical Components ABB Gas Circuit CKD Mechanical platform and accessories DXTECH Water Chiller Hanli Voltage 380V Three-phase 50 Hz

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. Ibjdpfx Afjzdz U Uohsb It has been disassembled and stored since 2022. Original new price: 450,000 euros.

Condition: used, table length 400 mm table width 400 mm table load 250 Kg table diameter 400 mm Iodjz Dkywjpfx Afhsbb swivelling range 135 Grad turning speeds 0,2 - 3,0 stufenlos U/min total power requirement 0,3 kW weight of the machine ca. 0,115 t dimensions of the machine ca. 1,2 x 0,8 x 1,5 m Welding turntable with - footswitch - manual tilt/swivel - remote control - infinitely variable speed - machine base frame

Condition: ready for operation (used), Year of construction: 2019, operating hours: 600 h, number of axes: 2, Plasma cutting machine manufactured in 2019. This KOIKE PNC-12 Extreme features an effective cutting area of 1,500 x 3,000 mm and a maximum programmed cutting speed of 3,000 mm/min. It includes a robust downdraft cutting table and a Cebora plasma power source with a maximum cutting current of 110 A. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE PNC-12 Extreme machine we have for sale. Contact us for further details. • Operating hours: approx. 600 h • Condition: Excellent • Effective cutting area: 1,500 x 3,000 mm • Rapid travel speed: 4,000 mm/min • Maximum programmed cutting speed: 3,000 mm/min • Drive system: Rack-and-pinion X/Y with linear guides • Control unit: KOIKE D420, 7-inch colour display, USB and manual program input • Torch control features: Initial height sensing, arc-voltage height control, collision/breakaway protection • Plasma cutting performance: Ibedpfx Asz Dhqaofheb • Maximum cutting current: 110 A • Recommended mild-steel cutting capacity: up to 35 mm • Maximum cut: approx. 40 mm • Maximum severance: up to 50 mm • Mild-steel piercing capacity: up to 20 mm • Duty cycle: 90 A at 100% / 95 A at 60% / 110 A at 50% • Oxy-fuel cutting performance: • Mild-steel cutting capacity: up to 80 mm (depending on nozzle, gas type, material and cutting conditions) • CNC-controlled piercing sequence Additional equipment • Plasma power source: Cebora Plasma Sound PC 110/T (Art. 336) • Machine torch: Cebora automatic torch with approx. 10 m cable package • Oxy-fuel: Original KOIKE motorised oxy-fuel cutting torch; automatic gas solenoid valves • Downdraft cutting table: Sideros Engineering Sirion 1000 (2019), S/N 1027/19 • Max air pressure: 6 bar • Max table load: 500 kg/m² • Design: Sectional/zoned downdraft table with central extraction channel • Nesting/CAD-CAM software on USB drive • Available documentation and accessories

Condition: used, Year of construction: 1985, chucking diameter 315 mm table load 300 Kg turning speeds 0,1 - 4,0 U/min connected load frequency 220 V bore diameter 63 mm weight 0,09 t Dimensions (LxWxH) 0,8 x 0,6 x 1,2 m Welding turntable incl. - 315 mm chuck - 3-axis torch holder Ibsdpfx Afsz Dky Djhjb - Cutting torch - Machine base frame

Year of construction: 2011, condition: ready for operation (used), controller manufacturer: KUKA, controller model: KCP2, laser power: 4,000 W, This 6-axis TRUMPF TruLaser Robot 5020 was manufactured in 2011. It features a TRUMPF TruDisk 4002 laser source and includes essential components such as an articulated robot arm, rotary/tilt table, and a chiller unit. If you are looking to get high-quality laser welding capabilities, consider the TRUMPF TruLaser Robot 5020 machine we have for sale. Contact us for further details. - Mains Voltage: 400 V- Frequency: 50 Hz- Connected Load: 16 kVA- Control Voltage: 24 V=- Required Fuse: 63 A- Compressed Air Connection: 6 +/- 1 bar- Laser Source: TRUMPF TruDisk 4002- Controller / Teach Pendant: KUKA KCP2- Included Components: Enclosure Cabin, Articulated Robot Arm, Rotary/Tilt Table, Control Panel, Laser Generator Unit, Chiller / Auxiliary Unit Ibsdsz A Tx Hepfx Afheb

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Model: MO Compact 900 Year of commissioning: 2025 Condition: Demo machine — under 200 production hours, virtually factory new Type: CNC plasma PIPE profiling machine (6-axis) - no beams Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a 6-axis CNC pipe cutting machine capable of processing round pipes up to 914 mm in diameter and 12,000 mm in length, with wall thicknesses ranging from 3 to 50 mm. The machine was installed in 2025 in Belgium and has logged fewer than 200 production hours — making it virtually a new machine at a pre-owned price. The 6th CNC axis maintains a constant torch-to-material distance, ensuring flawless weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head allows torch adjustment of ±60° and 380° rotation for precise contour cutting on any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor transport system on rail — Two-point fume extraction (at cutting head and through chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — E-cabinet with CNC unit, PLC, IP54 enclosure, power buffer — Industrial PC with 22" touchscreen and mobile control panel — All safety devices (CE certified per 2006/42/CE and 2004/108/CE) — Full technical documentation, operator manuals, installation drawings Key specifications: — Clamping range: 50 – 914 mm — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) — Plasma bevel range: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation footprint: 7.0 × 4.0 × 4.0 m — Machine weight: 6,000 kg Please note: COROBS machine control software licenses are not included and must be purchased separately from Voortman. Voortman can provide reinstallation, commissioning, operator training, and ongoing maintenance contracts at the buyer's facility. Why buy this machine? A new MO Compact 900 currently costs EUR 350,000+ and has a lead time of 6–12 months. This unit offers the same capability with immediate availability and significant savings. Full OEM support from Voortman is available for the buyer. Location: Belgium (available for inspection by appointment) Delivery: Ex-works. Dismantling and transport by agreement. Ibsdpfxey H I Trj Afhob For questions or further information, please send us a message or call us.

Condition: new, - Horizontal capacity: 500 kg - Vertical capacity: 250 kg Iedpjwin I Iofx Afhsbb - Table dimensions: 550 mm - Electrically tiltable - Foot pedal - Emergency stop - Documentation - 230 V

Condition: excellent (used), Trumpf TruMark 3000 Industrial laser Laser marking system 2 units in stock. Ibsdpfsz Azwgsx Afhob

Condition: used, manufacture Nelson Type FSE 100 / FSE 500 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Includes welding head, hoses, and control cabinet. Ijdpfoy Ihbxjx Afhsbb 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Year of construction: 2020, condition: used, Mains voltage 400V, 3 Phasen, N, PE, 50 Power consumption 40 KVA Network backup 32 A Isdpfoyu U E Nsx Afhsbb PTA main flow (25% ED) 280 A Pilot main current adjustable 5 - 20 A PTA burner PT 200 S-AUT In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, MIG/MAG pulsed gas shielded welding machine, EWM, type Phoenix 301 Progress Puls Force Arc Serial No. Art. No.: Year of manufacture: 2007 Isdoz Afhijpfx Afhobb Power: 300 amps = 60% duty cycle 250 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 29 volts Mains connection: 400 volts, 50 Hz, 16 amps plug - Digital display for voltage and current - Pulse function - Various welding programs selectable - 2-cycle, 4-cycle and spot welding - Water-cooled - 4-meter hose package, NEW, with central connection - Welding gas pressure regulator, NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration

Condition: excellent (used), Fronius TransPuls Synergic 5000 – 500 A MIG/MAG pulsed arc welding machine, water-cooled For sale is a powerful Fronius TransPuls Synergic 5000 industrial welding system with a separate wire feeder, water cooling, and a trolley. Iedpfx Afoz Ag Idshebb The digital Synergic control allows for convenient adjustment of the welding parameters. Thanks to various pre-programmed characteristic curves, the system – with the appropriate wire, shielding gas, and accessories – is suitable for welding steel, stainless steel, and aluminum, among other materials. A special feature is the water-cooled Fronius JobMaster welding torch. This torch has a digital display and enables the display and adjustment of important welding parameters directly on the torch. Equipment: * Fronius TransPuls Synergic 5000 Comfort * Wire feeder Fronius VR 4000 * Water cooler Fronius FK 4000-A * Water-cooled Fronius JobMaster welding torch * Digital display and adjustment options directly on the torch * Ground cable * Cylinder transport trolley with cylinder holder * Wire spool holder * Digital Synergic control * MIG/MAG standard and pulsed arc welding * Various pre-programmed material characteristic curves Technical data: * Manufacturer: Fronius * Type: TransPuls Synergic 5000 * Mains connection: 3 × 400 V * Mains frequency: 50/60 Hz * Maximum welding current: 500 A * Duty cycle: 500 A at 40% * Continuous operation: approx. 360 A at 100% * Wire feeder: VR 4000 * Water cooling: FK 4000-A * Cooling capacity: 2 kW * Protection class: IP23 * Suitable wire diameters: 0.8 / 1.0 / 1.2 / 1.6 mm * Material programs for steel, CrNi/stainless steel, aluminum, cored wire, and CuSi3, among others The device is in very good condition. An inspection is possible by prior appointment. Shipping is possible. Please contact me if you have any questions or are interested. The sale is made commercially. The stated price includes statutory VAT. You will of course receive an invoice with VAT shown. Subject to change, prior sale, and errors.

Condition: used, Straightening and welding plate, steel and grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 2000 mm Width: 1500 mm Ibodpfx Aeqylk Ujfhjb Thickness: 125 mm Plate thickness: approx. 40 mm throughout Table height: 880 mm - Table substructure made of steel (custom-made) Weight: 1700 kg Good condition

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar - with pressure reducer Iodpfxjxciumj Afhebb Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Good condition

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) Ibedpfx Ajrtvi Usfhjb TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) Ibsdpfx Aertvi Rofheb WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: good (used), Year of construction: 2010, total height: 765 mm, total width: 765 mm, total length: 2,790 mm, overall weight: 3,000 kg, set 1 (5 x in stock)  Driven Master unit CD-30 set 1 (5 x in stock) Idler Slave unit CI-30  Load capacity drive 15 ton Load capacity idler 15 ton Turning capacity combi 45 ton turning speed 130 - 1300 mm/Min Wheel size diameter 520 mm Wheel size width 176 mm Load capacity per section:15T Vessel range Minimum: 466 Vessel range Maximum: 6300Ø Variable rotation: yesRpm No of wheels per section:2+2 Wheel dimensions: 570 x 176Ø x mm Number of matching pieces:5 Length: 2790mm Width: 765mm Height: 765mm Weight: 3000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ibjdpfezw Hnmjx Afheb