Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 133504, MACHINE DETAILS Dimensions (L x W x H): approx. 9,000 x 6,000 x 2,800 mm Voltage: 400 V AC Frequency: 50 Hz Gbeds Ah Em Nopfx Aanow Fuse rating: 1,700 A Rated current: 150 A Power supply system: TN-S Supply pressure: max. 10 bar Operating pressure: 6 bar Compressed air connection: G ½ inch Compressed air quality: ISO 8573-1, cleaned and oil-free Ambient temperature: 10–45 °C Relative humidity: 20–80 % (without condensation) Noise level: < 78 dB(A) EQUIPMENT Suitable for operating environments with low dust and dirt levels, as well as oil vapors and humidity. Note: Further technical details can be found in the attached documents.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2011, operating hours: 27,693 h, laser power: 3,000 W, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,000 W Round tube diameter: min. 16 mm Round tube diameter: max. 225 mm Square tube dimensions: max. 160 × 160 mm Godo Air Hyjpfx Aansbw Rectangular tube dimensions: max. 200 × 100 mm MACHINE DETAILS Loading and unloading Loading length: 6,500 mm Unloading length: 6,500 mm Operating hours: 27,693 h EQUIPMENT Automatic rear loading Automatic unloading system Fiber laser technology Specialized software solutions

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 20,000 h, laser source model: ROFIN DC 020, laser power: 2,000 W, working length: 6,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Processing length: min. 3,200 mm Processing length: max. 6,500 mm Round tube diameter: min. 12 mm Round tube diameter: max. 120 mm Square tube dimensions: min. 12 × 12 mm Square tube dimensions: max. 100 × 100 mm Rectangular and oval tube dimensions: min. 10 × 12 mm Rectangular and oval tube dimensions: max. 120 × 70 mm Laser power: max. 2 kW MACHINE DETAILS Loading and unloading Loading length: 6,500 mm Unloading length: 4,500 mm Load capacity of the bundle loader: 4,000 kg Number of digitally controlled axes: 6 Gbedpj Air Idsfx Aanew Laser source: ROFIN DC 020 Operating hours: 20,000 h EQUIPMENT Automatic bundle loading system Unloading system ROFIN DC 020 laser source Cooling unit (chiller) Extraction system LT120 Optical weld seam tracking system LT120 Integrated micro-dosing system

Condition: used, Used IMAC Pullmax CB 18 portable plate beveling machine for sale. 18mm bevel capacity, automatic feed, cold beveling for weld preparation on plate and pipe. Available from Bowland Trading. IMAC Italia by Lodesani & Carreri . Main features Portable fixed-angle model Robust construction Compact dimensions and low weight Use on a workbench or directly on the sheet metal Automatic feed driven by the milling cutter Maximum bevel depth of 18 mm at 30°, achieved in multiple passes Machining on mild steel sheet Operation in upright or inverted position Operation with an overhead crane Trolley available as an accessory Suitable for machining long, heavy, and large workpieces Bevels at different angles using the optional roller kit Welding preparation bevels Machining of flat plates made from various materials Machining of large-diameter pipes Cold beveling Quiet operation No harmful dust or fumes Entirely manufactured in Italy Compliance with CE regulations IMAC Pullmax CB 18 Portable Plate Beveling Machine For Sale The IMAC Pullmax CB 18 is a robust Italian-built portable plate beveling machine designed for efficient weld preparation on steel plate and large diameter pipework. Manufactured by IMAC Italia (Lodesani & Carreri), the CB 18 provides accurate, high-quality cold bevels without heat distortion, dust, or fumes. Its compact, lightweight design allows operation directly on the workpiece or from a workshop bench, making it ideal for fabrication shops, pressure vessel manufacturers, structural steel contractors, shipyards, pipe fabricators, and heavy engineering applications. The automatic cutter-driven feed system ensures consistent and efficient material removal, producing precise bevels up to 18mm depth at 30° through multiple passes. The machine can be operated upright or inverted and is suitable for machining large, heavy workpieces where portability is essential. Key Features Maximum bevel depth: 18mm at 30° Automatic cutter-driven feed Portable fixed-angle design Cold beveling process Suitable for weld preparation Operates directly on plate or workbench Can be used upright or inverted Suitable for large plates and pipework Robust industrial construction Low noise operation No harmful dust or fumes produced Manufactured in Italy CE compliant Gbodpfe Akdhdjx Aansw Ideal for: Steel fabricators Pressure vessel manufacturers Pipework contractors Structural steel engineers Offshore and marine fabrication General heavy engineering applications

Condition: excellent (used), Year of construction: 2019, operating hours: 43 h, functionality: fully functional, machine/vehicle number: PR4-3000-0719-0385, input voltage: 400 V, working width: 1,500 mm, working length: 3,000 mm, control type: CNC control, Swift-Cut Pro MK4 CNC plasma cutting table, 3000 x 1500 mm cutting bed. Bought new from Swiftcut Automation Ltd in August 2019 and used for in-house fabrication work by a controls and automation company. Machine and equipment: - Swift-Cut Pro MK4 3 m x 1.5 m water table with integrated control console - Hypertherm Powermax45 XP plasma power source, 400 V 3-phase - Hypertherm Duramax 180 machine torch, 35 ft lead - 5 m work lead - Swift-Cut MK4 engraver system (V2) - Twin positioning lasers - Swift-CAM Standard software - Control PC with keyboard, Wi-Fi and network card Manuals available: installation, operation and pre-installation guides, plus engraver/marker setup guide. Viewing welcome by appointment at our Sunderland workshop. Collection by buyer. Prices exclude VAT. Gbodpfx Aao Ahikqjnew

Condition: used, Year of construction: 2007, 2007 Amada LC3015 XI NT, Co2 Laser Cutting Machine with CNC Control with Stacker, Donaldson Torit DCE Dust Collector & Riedel Chiller Comprising: Amada LC3015 XI NT Laser Cutting Machine. 'X' Axis 3,100mm x 'Y' Axis 1,550mm x 'Z' Axis 120mm. Sheet Size 3,000mm x 1,500mm, Max 20mm Thick. Max Weight 730kg. 40CFX, 4,000 Watt Co2 Laser Resonator. Automatic Pallet Changer. BWS Transformer. Operating Terminal Beiyer E700 Stand Alone Control. Riedel Stand Alone PC 1001.1MS5.1 Chiller (2007). LKI, AS LUL 300XI Automated Compact Storage, Loading & Unloading Tower System (S/No. 1294) (2006). Sheet Size Max 3,000mm x 1,500mm, Minimum 2,000mm x 1,000mm, Thickness Max/Min 20mm/0.5mm. Mitsubishi Q Series PLC. (2) Sick MSLE03-24011 Beam Sensors. Donaldson Torit DCE Stand Alone Dust Extractor with Donaldson TCB Total Control Board. Gbodpfx Aez E R Idoanow Weight of Laser Cutting Machine Approx 10,500kg. Dimensions Approx 6,500mm x 3,200mm x 2,100mm. Weight of Stacker Approx 11,000kg. Dimensions Approx 4,450mm x 2,700mm x 4,860mm High. Dimensions of Dust Extractor Approx 1,500mm x 1,400mm x 3,200mm High. Dimensions of Chiller Approx 2,860mm x 1,130mm x 2,000mm High. Power Supply 415 Volt, 3 Phase. Viewing Recommended. Please Note Technical Details of Stacker Shown within the Pictures.

Condition: used, functionality: fully functional, Year of construction: 2021, control type: CNC control, laser power: 3,000 W, type of cooling: water, Equipment: centralized greasing system, cooling unit, emergency stop, fume extraction, safety light barrier, Selling a used machine, currently in operation. Gbjdpfx As Akcnaoansw

Condition: used, Year of construction: 2022, Rotating and tilting table from Protec. Gjdpfs Akc Dtox Aanjbw

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 62005_2.0x3.0-30HP, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, total length: 3,500 mm, total width: 2,500 mm, Equipment: safety light barrier, NEC / DUAL HEAD Power Jet Systems Multi-Axis Waterjet Cutting Table Sold with x2 Digital Control High-Pressure Waterjet Pumps HP Pump Models: SX 222 V3 (Yr. 2005) Pump & SX 245 Pump (Yr. 2001) Plus, includes KMT Abrasive Hopper TWIN HEAD Industrial CNC Waterjet Cutting System: Manufactured by NEC Power-Jet Systems, this heavy-duty multi-axis waterjet cutting table is designed for precision cutting applications using pure water and/or abrasive waterjet technology. The machine features a rigid steel box-frame construction with integrated water tank, servo-controlled motion system, and industrial CNC control software. Suitable for engineering, fabrication, stone, glass, plastics, composites, rubber, foam, and metal cutting applications. Key Features: Multi-axis CNC waterjet cutting table Precision Ball Screw or Precision Rack & Pinion drive systems Linear bearing slideways Baldor digital servo motors and drive system Touchscreen operator interface Dedicated waterjet cutting software Integrated water tank/cutting table Adjustable water level system Abrasive distribution system mounted on gantry or Z-axis carriage Pure water and abrasive cutting capability Multi-head cutting configurations available Heavy-duty steel framework construction Stainless steel and anodised aluminium wetted components CAD/CAM compatibility with kerf compensation Nesting and material optimisation capability Dry-run facility and programmable jogging functions Technical Specification Construction Rigid heavy-duty steel framework Integral cutting tank and table Enclosed drive systems Cable trunking for protected service routing Local abrasive transfer unit Stainless steel and anodised aluminium wetted parts Integrated operator panel and electrical controls Motion System Precision Ball Screw drive (MaxiJet models) Precision Rack & Pinion drive (MidiJet models) Linear bearing guideways Baldor digital servo drives and motors Multi-axis configurations available: 2, 3 or 5-axis systems Software & Control Proprietary Power Jet cutting software CAD/CAM import capability Kerf compensation Material nesting and optimisation options Programmable jog speed control Home and return-home functions Dry-run programme verification Standard Machine Sizes MaxiJet: High-precision CNC waterjet table Ball screw drive system Standard cutting area: 2m x 3m Applications / Suitable for cutting: Godpjz Nll Hefx Aanebw Steel Stainless steel Aluminium Stone Glass Plastics Rubber Foams Composite materials Technical engineering materials NEC Power Jet CNC Waterjet Cutting Machine | Multi-Axis Abrasive Waterjet Table | Servo Controlled Search Keywords Waterjet cutter, CNC waterjet, abrasive waterjet machine, pure waterjet cutter, Power Jet Systems, MaxiJet, MidiJet, industrial cutting table, CNC cutting machine, water jet cutting system, fabrication equipment, engineering machinery.

Condition: good (used), functionality: fully functional, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser power: 6,000 W, sheet thickness (max.): 20 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, 6 kW Bodor Laser Cutter. Gedpfx Aoz Niv Ajansbw 2 Years old with low usage (less than 4 hours per week). Comes complete with mezzanine floor to raise chillers, air compressors and extractors out of the way. Cuts up to 20mm thick hardox on Oxygen. Cuts up to 6mm mild steel on Compressed Air. Automatic door and work bed. Manual part trays underneath.

Condition: used, Trotec Gjdpfx Aj Akdhajanebw Laser marking system / fiber laser marking system SpeedMarker 300 / SM300 S2 SpeedMarker FL 20 / 20 W Yb fiber laser Enclosed laser cabinet For sale is a used Trotec laser marking system for industrial marking and labeling applications. Technical data: Manufacturer: Trotec Laser Automation GmbH System type: SpeedMarker 300 / SM300 S2 Laser source: SpeedMarker FL 20 Laser type: Yb fiber laser Laser rated power: 20 W Wavelength: 1,050–1,090 nm Dimensions of the laser cabinet according to system-specific drawing: Width: approx. 559 mm Depth: approx. 806 mm Height: approx. 925 mm Weights according to a more recent manufacturer's data sheet (not confirmed for this system): Marking system incl. lens: approx. 65 kg Laser module: approx. 20 kg Laser PC / controller: approx. 9 kg Total weight with workstation: 120 Electrical data according to system documentation: Station: 230 V AC / 16 A / 50–60 Hz Station rated power: 1,500 W Laser source: 230 V AC / 2.1 A / 50–60 Hz Laser source rated power: 415 W Equipment: Enclosed laser cabinet with viewing window Pneumatically operated front door Laser control and laser PC Z-axis and rotary axis according to documentation Control panel with emergency stop and laser reset Safety shutter and door monitoring Exhaust connection / hose routing Workstation base as shown in the pictures Software / accessories according to the pictures: Trotec SpeedMark 3.9.3 on the PC SpeedMark software CD USB dongle "Trotec Gen4" License documents / JobControl certificate Other data carriers and documentation License status and transferability unchecked Application areas: Laser marking and component identification Metal marking / nameplates Serial numbers and industrial marking Condition: Used Optical condition according to the pictures. Scope of delivery: 1 × Trotec SpeedMarker 300 laser system With existing components as shown in the pictures. The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping via freight carrier possible by arrangement. Subject to changes, errors and prior sale. We will gladly answer any questions by telephone.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,540 h, machine/vehicle number: A1121D0047, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: Touchpoint HMI, laser type: fiber laser, laser source manufacturer: Trumpf, laser source model: TruDisk 3001, laser hours: 738 h, laser power: 3,000 W, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 2,500 mm, table width: 1,250 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,535 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 108 m/min, feed rate Y-axis: 108 m/min, workpiece weight (max.): 150 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer a well-maintained TRUMPF TruMatic 3000 (K09) combined laser and punching machine, manufactured in 2022. Manufacturer: TRUMPF Godpfx As Af Uvyeanebw Model: TruMatic 3000 (K09) Material number: 2448753 Power frequency: 50 Hz Voltage: 400 V Diagram number and version: 93120-5-200_05 Serial number: 407618918 Year of manufacture: 2022 Equipment number: A1121D0047 This is an excellent machine located in a clean production environment. It has only been used to process thin sheet metal under 3mm. It has almost all optional features selected from TRUMPF. It is equipped with SheetMaster and SortMaster. It comes with more than 500 tools, automatic QuickSet, and QuickSharp. It is currently in operation and can be inspected by appointment. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 84 m², suction capacity: 9,700 m³/h, negative pressure: 3,800 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Gedpfx Ae Ai S Skjanebw Brand: ESTA Model: DUSTEX F-84 The filter is cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Parameters: Max. capacity – 9700 m3/h Max. vacuum – 3800 Pa Filtration area 84 m2 Cartridge filter inserts – 4 pcs. Motor power 7.5 Kw. Inlet diameter – 350 mm Device dimensions: Height – 3.38 m Width – 1.38 m x 1.34 m Base – 1.05 m x 1.05 m Stock number: 0031

Condition: used, Year of construction: 2023, functionality: unexamined, total width: 3,000 mm, total length: 6,000 mm, Equipment: documentation/manual, We are selling our CNC plasma cutting machine at our Krefeld-Linn location. Unfortunately, this excellent machine is not being fully utilized, so we are offering it for sale. It is suitable for plasma and oxy-fuel cutting. The machine is operational at the location and can be inspected or tested while in operation with some advance notice (personnel must be present on-site, gas must be available). Bevel cutting and marking of components were the applications that, in addition to the generally high quality of the machine and the cut edges, always impressed us. New price in 2023: EUR 290,000 plus VAT (including installation). Gedps Aihalofx Aanjbw Machine designation: MasterCut 6001.30PtkG Plasma rotator "MasterCut" for weld preparation with the Kjellberg® Q 3000 plasma power source Oxy-fuel support, fully automatic Total working area: approx. 6,000 x 3,000 mm Max. travel height: approx. 150 mm Max. table load: approx. 150 mm Guideways in X-direction: milled S49 rails Drives: digital, maintenance-free AC servo motors with IRC Positioning speed: up to 30,000 mm/min Positioning accuracy: ≤ 0.15 mm/m Bidirectional repeatability: 0.05 mm/m 1. Control PC 2. USB 3.0 connection for storage media 3. Remote maintenance module MicroStep RemoteDiagnostics® 4. Flame cutting table with sectional extraction | 6,000 x 3,000 mm 5. Grid cover in the flame cutting table | 6,000 x 3,000 mm 6. Reinforced design of the flame cutting table | 6,000 x 3,000 mm 7. Kjellberg® plasma power source Q 3000 8. Connection of the fine plasma source to the CNC control 9. Control of the automatic gas console 10. Electrical and mechanical torch sensing 11. Integration of an existing Kemper filter system, Type System 8000 with a capacity of 7.5 kW. 12. LED signal column on the portal bridge (2 colors) 13. Tactile shut-off device for guideways 14. Light curtain protection (collision protection) of the portal bridge via emergency stop 15. Smart Z Movement 16. Plasma rotator "MasterCut" with fully automatic support 17. ACTG® - Automatic calibration unit for the bevel cutting unit 18. ACTG® Calibration Report 19. Oxy-fuel support | fully automatic 20. Automatic gas console for oxy-fuel torch (cutting gas: acetylene) 21. Machine cutting torch GCE® FIT+ three (cutting gas: acetylene) 22. Active collision protection 23. Asper Basic® | The 2D programming software (single-user license) including gas system and extraction. We can dismantle and load the system at the buyer's direction and risk.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8070850, total height: 1,186 mm, total width: 806 mm, total length: 856 mm, overall weight: 420 kg, laser power: 4,000 W, laser wavelength: 1,070 nm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, sheet thickness steel (max.): 5 mm, degree of automation: automatic, sheet thickness stainless steel (max.): 4 mm, laser type: fiber laser, laser source manufacturer: IPG Photonics GmbH, actuation type: electric, Equipment: cooling unit, Technical Data Manufacturer: IPG Laser GmbH Laser Model: YLS-4000-S2-IHE Serial Number (SN): 8070850 Rated Voltage: 400V AC +-10% 3P/PE Frequency: 50/60 Hz Full Load Current: 80 A Fuses: 80A / 120kA Date of Manufacture: 08.12.2008 Wiring Diagram: G25-16-70820-4 Cooler Wiring Diagram: G25-16-61012-4 Certification: CE marking Wavelength: 1070 nm Wavelength Bandwidth: approx. 1070 nm – 1080 nm Rated Output Power: 4.0 kW Laser Class: Class 4 Godpfx Ajzc Hpveanobw Power Control: 10% to 100% Typical Fiber Diameter (Delivery Fiber): Mostly 100 µm (micrometers) Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, total height: 800 mm, total length: 3,000 mm, total width: 1,500 mm, Colour: Blue Empty weight: 1.400 kg - Model: Hardened metal - Table length [mm]: 3000 - Table width [mm]: 1500 - Table top thickness [mm]: 15 - Max. workpiece weight [kg]: 4000 - Options: Drilled holes, Diagonal grid - └ Hole diameter [mm]: 28 Gbedpfs Ai Hb Isx Aanow - Transport dimensions: 3000mm x 1500mm x 800mm (l x w x h) - Transport weight [kg]: 1400kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation. Gedpfx Asz Eu Syoanobw

Condition: used, total height: 1,000 mm, total length: 2,400 mm, total width: 1,200 mm, Year of manufacture: 2024 Colour: Grey Empty weight: 800 kg Welding Table / Clamping Table - Drilled holes! - Diagonal grid! Dimensions: 2000x1000 - 2400x1200 - 3000x1500mm Tabletop thickness: 15 mm Hole diameter: 28 mm Price excludes accessories. Individual tools are also available. Standard Tool Set: - 4× 3D Angle 300 mm - 6× Stop 150 mm - 6× Stop 225 mm - 1× Protractor - 2× Prism - 1× Eccentric Clamp Gsds Ai E Dxspfx Aanjbw - 1× Flat Angle - 12× Clamping Bolt - 12× Clamping Clamp - Year: 2024 - Model: Hardened metal - Table length [mm]: 2400 - Table width [mm]: 1200 - Table top thickness [mm]: 15 - Options: Drilled holes, Clamping grid, Diagonal grid, Adjustable working height - └ Hole diameter [mm]: 28 - Transport dimensions: 2400mm x 1200mm x 1000mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2022, Waterjet cutting machine manufactured in 2022. This BMB 167 features a maximum sheet size of 1670 × 1210 mm and a maximum die cutting size of 1650 × 1200 mm. It operates at a processing speed of 4,500 sheets per hour and can handle a maximum material thickness of 8 mm. If you are looking to get high-quality die cutting capabilities, consider the BMB 167 machine we have for sale. Contact us for further details. • Die cutting method: Flatbed • Maximum sheet size: 1670 × 1210 mm • Minimum sheet size: 620 × 560 mm • Maximum die cutting size: 1650 × 1200 mm • Maximum pressure: 250 tons • Maximum material thickness: 8 mm • Processing speed: 4,500 sheets/hour • Main motor power: 15 kW • Total power: 25 kW • Processed materials: Corrugated cardboard, carton board • Line components: Feeder, die cutter, stripping unit, delivery section Gbjdpfx Aas Ai Svksnow • Machine weight: 23,000 kg • Operating status: In production

Condition: used, Trumpf TruMicro 6 kW Laser Source High-performance disc laser with nanosecond pulses. The high-performance nanosecond lasers of the TruMicro Series 7000 are based on disc laser technology and combine short pulses and high pulse energies, even at high frequencies. This enables you to remove coatings and contaminants at maximum speed and reduce your cycle times. Optimize your processes further by varying the repetition rate – while maintaining a constant pulse duration. For efficient and economical cleaning of tire molds, the short-pulse lasers of the TruMicro Series 7000 are the ideal tool. Large-area applications with high average power: Ablation, cleaning, tempering: The lasers of the TruMicro Series 7000 demonstrate their full performance in large-area applications. With pulse energies of up to 100 mJ, they achieve enormous material removal rates. A scanner ensures excellent utilization of the power. Flexible laser fiber optic cables transport the light where it is needed and facilitate the integration of the laser. Gbsdpjxaktlefx Aanew Manufacturer: Trumpf Type: TruMicro 7050 Laser Source Power: 6 kW Cooling: Water System input power: 380–460 VAC 3-phase Laser power: 750 W Wavelength: 1030 nm Pulse energy: 80 mJ Pulse duration: 30 ns Beam quality: 20 mm Repetition rate: 5 to 100 kHz Fiber diameter: 400 µm IP rating: 54 Dimensions (W x H x D): 1460 mm x 1350 mm x 730 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1988, functionality: limited functionality, total width: 5,500 mm, total length: 5,500 mm, We are offering this used Yaskawa Yasnac RX ENCM - RP618 welding cell with welding robot and rotary table, manufactured in 1988. Manufacturer: Yaskawa Model: Yasnac RX ENCM - RP618 Year of manufacture: 1988 Condition: Used Machine type: Welding cell with welding robot and rotary table Rotary table: Motoman Type YRFL-NND10G Data: Year: 1988 Weight: approx. 2200 kg Axis dimensions: 1400 mm x 600 mm Footprint: 5500 mm x 5500 mm Programming documentation not available PLC control with occasional error message (pressing the PLC control resolves the error) Included: Robot Rotary table Control cabinet Robot controller Pictured drip tray Pictured floor mat Gbjdpfx Aj Aifrhjansw Light curtains Not included: Welding machine Extraction system Partition walls (right / left) Availability: Upon request IMPORTANT!!! Dismantling and transport will be carried out by the buyer. If you have any questions or require further information, please send us a message or call us.

Condition: used, TRUMPF Mobile Laser Marking System / Mobile Laser Marker TRUMPF TruMark 5010 Mobile Marker Mobile fiber laser marking system with a hand-held processing unit For sale is a used mobile laser marking system from the manufacturer TRUMPF. The system is suitable for the permanent marking of metallic components, Godpfxoz Eh Eyj Aanobw for texts, barcodes, Data-Matrix codes, graphics, and logos, as well as for industrial applications in production and quality assurance. Technical data: Manufacturer: TRUMPF Laser Marking Systems AG Type: TruMark 5010 Mobile Marker Device type: Mobile laser marking system / Fiber laser Year of construction: 2014 Laser medium: Yb:Fiber Wavelength: 1062 ± 3 nm Pulse repetition frequency: 1–200 kHz Pulse duration: 250 ns Max. Marking area size: 50 × 30 mm² Min. Focal diameter: 70 µm Beam quality M²: < 1.6 Electrical connection: 100–230 V / 50–60 Hz Power consumption: 2.5 / 5 A Power rating according to nameplate: 600 W Typical power consumption at rated power: 210 W Protection class: IP40 Dimensions: 460 × 1200 × 980 mm (W × H × D) Weight: 90 kg Processing unit: Dimensions: 190 × 320 × 490 mm (W × H × D) Weight: 5 kg Length of connecting hose: 1.7 m Laser safety class: 1 for metallic workpieces Extraction: integrated Equipment: Hand-held laser processing unit Mobile chassis Integrated touch display Integrated extraction Yb:Fiber laser TruTops Mark operating/marking software Connecting hose Original TRUMPF product documentation Accessories as shown in the pictures Application areas: Laser marking of metallic components Component marking Traceability Static and variable texts Barcodes Data-Matrix codes Graphics and logos Prototype construction Sheet metal fabrication Automotive industry Aerospace industry Scope of delivery: 1 × TRUMPF TruMark 5010 Mobile Marker Hand-held processing unit Touch display Integrated extraction TRUMPF product documentation Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or any other items not explicitly mentioned are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: like new (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 1872509, overall weight: 1,000 kg, We offer a well-maintained high-pressure water pump UHDE HP 19/15-S. Year of manufacture 2007. Condition is as new. Gedpfo Ahw Erex Aanebw

Condition: used, Year of construction: 2021, functionality: fully functional, sheet thickness (max.): 25 mm, working width: 1,500 mm, hose package length: 10,700 mm, working length: 3,000 mm, CNC Plasma Cutting System Swift-Cut Pro 3000 MK 5 – Complete Manufacturing Cell incl. Portal Crane & Hypertherm 105 SYNC Description For sale is a professional, fully functional, and immediately ready-to-use CNC plasma cutting system, type Swift-Cut Pro 3000 (MK 5). The system was acquired from the renowned specialist dealer Heidenbluth Schweißtechnik and set up as a well-thought-out, turnkey manufacturing cell. The machine is in operation, has few operating hours, and can be inspected and tested while powered on. Gjdpfx Ao Ah Eu Esanebw Scope of Delivery & Technical Equipment • CNC Cutting Table: Swift-Cut Pro 3000 MK 5 with a working area of 1,500 mm x 3,000 mm. Equipped with a sectional extraction table, Soft-Sense height sensing, collision protection, and a robust steel frame with integrated forklift attachment. • Plasma Power Source: Hypertherm Powermax 105 SYNC (year of manufacture 04/2021) incl. CPC connection, voltage divider, and serial interface for precise cuts up to 25 mm sheet thickness. • Cutting Torch: Machine cutting torch Smart SYNC 180° (10.7 m). • Material Handling System (Portal Crane): Solid, custom-made steel crane frame including a heavy-duty trolley with chain hoist for ergonomic loading of large-format sheets. • Marking System: Integrated marking system PRO. • Exhaust & Compressed Air: Powerful exhaust fan set (radial fan with wall console) for long duct runs including approx. 20–25 m of flexible ducting. Integrated Camozzi compressed air maintenance unit and a water separator Dropout 600 A. • Control & Software: Industrial control console with touchscreen monitor, PC and LAN connection. Including full versions of SWIFT Wizard 3 (automatic nesting) and SWIFT Cam Wizard 3 (incl. 2nd license with dongle for an additional external workstation). • Accessories: Comprehensive set of wear parts (SYNC 45A to 105A, FineCut nozzles, electrodes and wear parts box). Sales and Delivery Conditions • Price: €28,500 (net) OBO (or best offer) • Location: Schleswig-Holstein • Availability: Immediately • Delivery: The sale is intended for self-collection. Assistance with loading on-site is possible upon agreement using a forklift. Dismantling of the ceiling structure (crane) and the piping is carried out by the buyer after consultation.

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Gjdpfxjzlt Ayj Aanjbw This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.