Used Haas Vf 2 Ss for sale (225)

Condition: excellent (used), Year of construction: 2019, Traverses XYZ: 762 x 508 x 508mm, 500mm x 500mm table, Iodpfx Aoz Sqqmocpjtn max table weight 300kg, table tilt +110°, -35°, 22.4kW, 15000rpm, BT40, 40 station tool changer, Through spindle coolant, Tool Setter, Programmable coolant,

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec - Repeatability: 10 arc-sec Ijdpfxey Tp Hgs Acpjtn - Resolution: 0.001° B-axis (rotating): - Rotation range: 360°/continuous - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) - Renishaw riser block for side receiver mounting - Original documentation

Condition: excellent (used), HAAS Mini Mill 2 Vertical Machining Centre Year 2010 Serial number 1081104 X axis travel 508 mm Y axis travel 406 mm Z axis travel 356 mm Table size 1,016 × 356 mm Maximum table load 227 kg Spindle nose to table 102–457 mm Maximum spindle speed 6,000 rpm Maximum spindle power 5.6 kW / 7.5 hp Itjdsz N Alwspfx Acpjn Spindle taper 40 taper — CT40 or BT40 to confirm Automatic tool changer 10 station

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VP 4SS was manufactured in 2014. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool change count of 67,000. If you are looking to get high-quality machining capabilities, consider the HAAS VP 4SS vertical machining centre we have for sale. Contact us for further details. • Operating hours: 14,700 h • Tool changes count: 67,000 • Voltage: 354–488 V Itjdpsz Dauwjfx Acpsn • Phase: 3 • Frequency: 50/60 Hz • Full load current: 40 A

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,200 W, number of slots in tool magazine: 31, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details. • Condition: Showroom machine • Working hours: 0 • Spindle nose to table: max 19.0 in / 483 mm; min 4.0 in / 102 mm • Spindle max torque: 22.0 ft-lbf @ 5000 rpm / 29.8 Nm @ 5000 rpm • Spindle drive system: Direct Speed, Belt Drive • Spindle bearing lubrication: Air / Oil Injection • Spindle cooling: Air Cooled • Table length: 36.0 in / 914 mm Itodpfx Acjz Nxwiepen • Table width: 12.0 in / 305 mm • Table T-slot width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Table T-slot center distance: 4.33 in / 110 mm • Number of standard T-slots: 3 • Max cutting feedrate: 833 ipm / 21.2 m/min • Rapids (X/Y/Z): 1200 ipm / 30.5 m/min • Max thrust (X/Y/Z): 2000 lbf / 8896 N • Tool changer type: Side-Mount Tool Changer (SMTC) • Tool changer capacity: 30+1 • Max tool diameter (full): 2.5 in / 64 mm • Max tool diameter, large (adjacent empty): 5.0 in / 127 mm • Max tool length (from gage line): 7.00 in / 178 mm • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 4.20 s • Coolant capacity: 45 gal / 170 L • Air required: 4 scfm @ 100 psi / 113.0 L/min @ 5.5 to 6.9 bar • Inline air hose & coupler: 3/8 in • Input AC voltage (3 phase) - Low / High: 220 VAC (30 A) / 440 VAC (15 A) • Shipping dimensions: 90.0 in x 80.0 in x 99.0 in / 229 cm x 203 cm x 252 cm • Shipping weight: 4650 lb / 2109.2 kg Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Tool taper: BT-40 • Rapid Traverse: 35.6 m/min • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes Itodpoz Ah S Djfx Acpjn • Automatic Air Blast: Yes • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes • High-Speed Machining: Yes • Auxiliary High-Pressure Filter: Yes

Condition: excellent (used), Year of construction: 2006, Haas TM 2 TRAVELS X 1016MM Y 406 MM Z 406MM Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. Ijdpfx Acsyftdfopotn We find the TM2 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VF 4SS was manufactured in 2018. It features an X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool changes count of 69,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details. Ijdpfxez Dar Ne Acpjtn • Operating hours: 31,300 h • Tool changes count: 69,000 • Voltage: 440 V • Phase: 3 • Frequency: 50/60 Hz • Full-load current: 35 A

Condition: excellent (used), functionality: fully functional, controller manufacturer: Haas, Equipment: documentation/manual, 3-Axis Machining Center Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control system: Haas (retrofit) Operating hours: unknown Serial number: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel distances X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations Iodpfx Asz Sy I Iocpstn - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint (L x W x H): 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- - Retrofitted with a newer Haas M17.04B control system! - In top condition.

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: Itodpfx Acsy Tp E Aopsn - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,326 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 207 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-6SS was manufactured in 2016. It features impressive X, Y, and Z travels of 1,626 mm, 813 mm, and 762 mm respectively, along with a high-power 22.4 kW spindle capable of reaching 12,000 rpm. The machine includes a high-speed side-mount tool changer with 24+1 stations and a robust table load capacity of 907 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-6SS vertical machining centre we have for sale. Contact us for further details. • Travels: X 1,626 mm; Y 813 mm; Z 762 mm; spindle nose to table 102–864 mm • Table: 711 × 1,626 mm; 5 × 16 mm T-slots; 125 mm T-slot pitch; max table load 907 kg • Spindle: max torque 122 Nm @ 2,000 rpm; ABEC Class 7 bearings; electronic orientation; water-cooled spindle head; BT40; through-spindle air blast; tool release button • Tool changer: • Standard side-mount 24+1, BT40; all-electric bi-directional; max tool Ø 76 mm (full), 127 mm (adjacent pockets empty); max tool weight 5.4 kg; tool-to-tool 2.3 s; chip-to-chip 3.2 s • Optional 40+1: tool-to-tool 2.8 s; chip-to-chip 3.6 s; max tool Ø 76 mm (full), 152 mm (adjacent pockets empty) • Feed rates: rapid traverse X/Y/Z 30.5 m/min; max cutting feed 21.2 m/min • Motors/Drives: axis max thrust (X/Y/Z) 15,124 N; direct-coupled servo motors; brushless servo motors; Vector Drive (Y-Δ) • Coolant & lubrication: 360-litre pull-out coolant tank; automatic lubrication system • Construction & enclosure: rigid cast iron construction; triangular wide-base castings; heavy-duty sheet steel enclosure; 14-gauge cold-rolled steel; free-flow enclosure design; door opening width 1,549 mm • Machine size & utilities: max height 3,378 mm; width 5,232 mm; depth 3,835 mm (door open); compressed air 113 l/min @ 6.9 bar; electrical 380 VAC, 3-phase, 50–60 Hz; installed power 28 kVA • Controls/Functions: Rigid tapping; Remote Hand Jog (RJH); tool load monitoring; 5 spare M-functions • Accuracy/Quality: 100% ballbar test for 3D squareness and machining accuracy • Other: high-power cartridge spindle; high-speed side-mount tool changer (24+1); easily accessible coolant tank; 1-year parts and labour warranty Iodpfx Aozh Hbnjcpotn Additional equipment • None listed (no robots, automation, chip conveyor, bar feeder, or other external accessories specified)

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1575 x 584 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. • Working Hours: 0 (Showroom machine) • Spindle Nose to Table (max): 32.9 in / 836 mm • Spindle Nose to Table (min): 7.9 in / 201 mm • Spindle Max Torque: 340.0 ft-lbf @ 700 rpm / 460.0 Nm @ 700 rpm • Spindle Drive System: 2-Speed Gearbox • Table Length: 62.0 in / 1575 mm • Table Width: 23.0 in / 584 mm • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • T-Slot Center Distance: 3.15 in / 80 mm • Number of Std T-Slots: 7 • Max Weight on Table (evenly distributed): 4000 lb / 1814 kg • Max Cutting Feedrate: 500 ipm / 12.7 m/min • Rapid Traverse (X, Y, Z): 710 ipm / 18.0 m/min • Max Thrust X: 3400 lbf / 15124 N • Max Thrust Y: 4100 lbf / 18238 N • Max Thrust Z: 5600 lbf / 24910 N • Tool Changer Type: SMTC (Side-Mount Tool Changer) • Tool Capacity: 30+1 • Max Tool Diameter (full): 4.0 in / 102 mm • Max Tool Diameter, Large (adjacent empty): 7.0 in / 178 mm • Max Tool Length (from gage line): 16.00 in / 406 mm • Tool-to-Tool Time (avg): 4.20 s • Chip-to-Chip Time (avg): 6.30 s • Coolant Capacity: 95 gal / 360 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Coupler (Air): 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC (70 A Full Load) • Input AC Voltage (3 Phase) - High: 440 VAC (35 A Full Load) • Domestic Shipping Pallet Dimensions: 168.0 in x 102.0 in x 125.0 in / 427 cm x 260 cm x 318 cm • Export Crate Dimensions: 168.0 in x 102.0 in x 130.0 in / 427 cm x 260 cm x 331 cm • Shipping Weight: 16250 lb / 7371.0 kg Additional equipment • Machine vise mounted on T-slot table • Air gun attachment • Spray container and cleaning brush holder mounted on control arm console Itjdpfx Asz Nlyqocpen Technical Specification Taper Size BT 50

Condition: used, Year of construction: 2019, operating hours: 6,744 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,454 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Buy both machines together for €125,000. Excellent opportunity for a complete Haas machining package. • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws • RTAP-3 – Synchronized threading without expensive holders with compensation • TSC 300 psi (21 bar) • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE • Automatic air gun • TAB – air cooling through the spindle • Renishaw WIPS – measuring, scaling, rotation • High-speed machining • ACF 25-micron filter • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC • WIFI connection to local network • WIFI camera • Automatic door • 15 tool holders • 4,454 hours of cutting (Spindle On Time) Itodpfx Aozc Ni Sscpon • 6,744 hours of cycle time The machine is powered on and available for inspection at any time. Complete documentation available. Original paint, no accidents, no crashes. Regularly maintained machine. Immediate availability.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. • Machine hours (as shown on the screen): • Power On: 25,416 h • Cycle Start: 8,164 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 positions (side-mount) Itedpfx Acox D I Stepsn • CNC control: Haas CNC Control

Condition: used, Year of construction: 2018, HAAS ST20Y, year 2018 Y-axis C-axis Live tooling Chuck diameter 210mm Max. spindle speed 4000 rpm Spindle bore 51mm Z-axis travel 533mm Y-axis travel ±51 mm X-axis travel 236 mm Tool turret with 24 positions on BMT65 Programmable tailstock Tool probe Itedoz N Spljpfx Acpon Part catcher Chip conveyor Tool holders: 9 standard Powered tool holders: 2, 1/1

Condition: excellent (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, HAAS control with LCD screen and USB interface Ijdpfoz R Altjx Acpetn Table dimensions: 1219 x 457 mm Max. table load: 1588 kg T-slots in table: 16 x 80 x 5 mm X-axis: 1016 mm Y-axis: 508 mm Z-axis: 635 mm Distance from spindle nose to machine table: 107 - 742 mm Spindle speed: 8100 rpm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer: 20-fold (or 20-station) Weight: 5320 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Equipment, Accessories - Coolant system - Chip auger - RENISHAW zero-point probing system with OMP60 probe - RENISHAW tool setter (not mounted) - Machine feet - Documentation The machine has been used very little and is in very good condition. It is still under power in Hungary. First owner. It was purchased as new in Hungary and has not run long hours.

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Itedpfoxrf Stex Acpen Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, controller manufacturer: Haas, total height: 2,500 mm, total length: 3,500 mm, total width: 2,800 mm, table width: 450 mm, table length: 1,200 mm, overall weight: 6,000 kg, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, A Haas VF3 CNC vertical machining center is available. X/Y/Z axis travels: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, maximum table load: 1500kg, rapid traverse rate: 25m/min, feed rate: 16m/min, number of tool positions: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. On-site inspection is possible, and the machine can be powered on. Ijdpezu Dfdsfx Acpjtn

Condition: excellent (used), Year of construction: 2008, Haas VF-5D/40TRHE 5-Axis Machining Center Year of manufacture: 2007/11 X-axis travel: 1,270 mm Y-axis travel: 660 mm Z-axis travel: 635 mm A-axis swivel range: ±120° B-axis rotary range: 360° Diameter of the rotary table: Ø211 mm Max. load capacity of the rotary table: 90.7 kg Table dimensions: 1,321 × 584 mm Max. table load: 1,814 kg Spindle speed: 0–15,000 rpm Spindle motor: 20 HP / approx. 14.9 kW Spindle taper: CT #40 Tool changer: 24 positions APPROXIMATE MACHINE DIMENSIONS Length: 3,531 mm Width: 2,591 mm Height: 2,921 mm Machine weight: approx. 7,484 kg Itedpfx Aoztwdqscpon EQUIPMENT HAAS 5-axis control (drives and wiring) 2-axis swivel table (trunnion)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power Ijdpfx Aoydil Necpjtn 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: excellent (used), Year of construction: 2016, operating hours: 581 h, feed length X-axis: 508 mm, feed length Y-axis: 406 mm, feed length Z-axis: 356 mm, controller manufacturer: Haas, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, We are offering this excellent Haas Mini Mill 2 vertical machining center, manufactured in 2016. It was primarily used to process aluminum, with occasional work on other materials such as POM, MDF, and brass; steel was processed very rarely. A large selection of tools (almost exclusively for non-ferrous metals) is available and will also be sold. We would be happy to offer it as a set. Total cycle time: 581 hours. The machine has been used infrequently and is therefore in very good condition. Includes a Renishaw measuring system. Isdpfx Aozg E Hmecpotn If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Haas Machining Center 3 Axes + 1 Itjdpjz Ir Nusfx Acpon Model VF-1DHE Year 2002 Documentation Available Includes 4-Axis Rotary Table Video Available Inspection Possible

Condition: good (used), Year of construction: 2006, functionality: fully functional, Machine parameters: Swing over bed: 406 mm Itodpfxez S Hy Rs Acpen Max. turning length: 1219 mm Description: The machine is in good technical condition, and a test run is possible upon prior agreement. Haas CNC control. Max. turning diameter 406 mm / 16". Max. turning length 1,219 mm / 48". Distance between centers 1,219 mm / 48". Swing over cross slide / carriage approx. 282 mm / 11.1". X-axis travel 203 mm / 8". Z-axis travel 1,219 mm / 48". Spindle A2-6. Spindle bore 76.2 mm / 3.00". Spindle speed 0–2,000 rpm. Spindle power 12 HP / approx. 8.9 kW. Torque approx. 203 Nm at 150 rpm. Chuck usually 10" / 254 mm. Tailstock manual, depending on configuration. Weight approx. 2,087 kg. Machine dimensions approx. 2,515 × 1,727 × 1,981 mm (operating dimensions). Electrical connection 195–260 V, 3-phase / approx. 25 A or 1-phase 240 V / 40 A depending on configuration.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,995 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, controller manufacturer: HAAS, table width: 267 mm, table length: 1,467 mm, table load: 159 kg, overall weight: 2,295 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, number of slots in tool magazine: 10, number of axes: 3, This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details. • Max tool diameter: 89 mm • Positioning accuracy: 0.01 mm • Repeatability: 0.01 mm • Air pressure: 6.9 bar • Air consumption: 113 l/min • Power supply: 3 × 400 V, 50 Hz Technical Specification Taper Size ISO 40 Itsdpfxjzcnzmj Acpon

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5SS was manufactured in 2016. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and a 24-position tool magazine. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5SS vertical machining centre we have for sale. Contact us for further details. Ijdpfxeypb A Dj Acpjtn • T-slots: 7 • Max spindle torque: 122 Nm @ 2000 rpm • Rapid feed: 30 m/min • Tool magazine: 24 positions Technical Specification Taper Size ISO 40