Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,256 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table load: 250 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 710 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Table dimensions: 850 x 400 mm Max. table load: 250 kg Table height from floor: 850 mm Spindle speed: 12,000 rpm Spindle taper: BBT 30 Hnjdpoxlf Nrofx Ag Neu Main spindle power: 13 kW Rapid traverse (X, Y, Z): 60 m/min Max. tool diameter: 68 mm Max. tool length: 200 mm Max. tool weight: 3.0 kg Tool change time: 0.9 s Max. number of tool stations: 20 MACHINE DETAILS Control: FANUC 0i-MF Dimensions (L x W x H): 2,100 x 2,600 x 2,700 mm Machine weight: 3,150 kg Operating hours Machining time: 2,256 h Run time: 3,557 h Control on: 24,690 h EQUIPMENT Automatic door Keyarrow chip conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Hnsdexlctzjpfx Ag Neu Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Hedpfx Asxf Htxjg Njnu Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package

Year of construction: 2007, operating hours: 300 h, condition: ready for operation (used), functionality: fully functional, overall weight: 1,300 kg, machine/vehicle number: PSW-L, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Tool holder with only 300 operating hours! Hnedpfjxliy Usx Ag Nsu MACHINE DETAILS Electrical Data Voltage: 3 × 400 V Frequency: 50/60 Hz Rated Current: 1.8 A Power: 710 VA Pneumatics Compressed air supply: 5 bar / 200 l/min Weight: 1,300 kg Operating hours: 300 h EQUIPMENT 3 pallets Documentation

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Hedpfx Agsxg Izas Njnu Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter: 320 mm, travel distance X-axis: 240 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 495 mm, bar passage: 51 mm, Lathe with LNS bar feeder & additional equipment! The machine has been completely inspected and geometrically measured by the seller. It is ready for immediate use! TECHNICAL DETAILS Travel X-axis: 240 mm Travel Y-axis: 100 mm Travel Z-axis: 495 mm Max. machining diameter: 320 mm Bar capacity: 51 mm Main spindle speed: 5,000 rpm Main spindle motor power: 22 kW Hsdoxg D Amepfx Ag Nenu Sub spindle speed: 5,000 rpm Sub spindle motor power: 22 kW MACHINE DETAILS Control: Mazatrol640T EQUIPMENT 2 x 12-station turrets with driven tools CNC option package EIA / ISO programming Tool eye Partition wall Automatic parts catcher with conveyor belt LNS short bar loader Quick Load Servo III High-pressure coolant 10 bar Chip conveyor Mayfran ConSep 2000 II

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travels X-axis: 760 mm Y-axis: 530 mm Z-axis: 560 mm Speeds Rapid traverse: 40 m/min Spindle Speed: max. 12,000 rpm Power: max. 25 kW Hnodpfsxlf D Nsx Ag Nju Tool magazine and table Tool magazine positions: 30 Table size (L × W): 900 × 500 mm EQUIPMENT Including chip conveyor Including slant bed filtration system Including zero-point clamping system Including 4th axis Rotamatik 120 New Däublin

Condition: ready for operation (used), functionality: fully functional, overall weight: 24,400 kg, operation weight: 23,600 kg, Year of construction: 2007, operating hours: 9,500 h, cutting height (max.): 10,850 mm, arm reach: 10,010 mm, machine/vehicle number: HCMBFH00T00201484, TECHNICAL DETAILS Working Ranges Max. reach: 10,010 mm Max. reach (on the ground): 9,830 mm Max. digging depth: 6,890 mm Max. digging depth (8' level): 6,650 mm Max. cutting height: 10,850 mm Max. dumping height: 8,050 mm Min. swing radius: 2,950 mm Max. vertical wall: 5,600 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,070 mm x 2,990 mm x 2,950 mm Total weight: 24,400 kg Operating weight: 23,600 kg Rear swing radius: 1,680 mm Rear length: 1,680 mm Overall upper carriage width: 2,890 mm Overall height over cab: 2,950 mm Minimum ground clearance: 450 mm Track gauge: 2,390 mm Shoe width: 600 mm Undercarriage width: 2,990 mm Engine: Isuzu AI 4 HK 1 X Power: 122 kW / 164 HP Number of seats: 1 Hjdpoxhdx Refx Ag Nonu Operating hours: approx. 9,500 EQUIPMENT Cabin Standard bucket MONO-BOOM

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 1,520 mm, turning diameter: 540 mm, spindle speed (max.): 10,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,595 mm, rotational speed (max.): 3,500 rpm, number of slots in tool magazine: 40, swivel angle B-axis (min.): -120 °, swivel angle B-axis (max.): 120 °, TECHNICAL DETAILS CNC control: Fanuc 18iT-B Turning length: 1,520 mm Swing diameter: Ø 540 mm Turning diameter over bed: Ø 750 mm Turning diameter over cross slide: Ø 600 mm Bar capacity: 76 mm Turning-milling spindle X-axis travel: 555 mm Y-axis travel: ±80 mm (160 mm total) Z-axis travel: 1,595 mm B-axis indexing: ±120° (240° total) Tool system: Capto C6 Max. tool diameter (continuous): 90 mm Max. tool diameter (without adjacent tools): 120 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time (tool to tool): 1.5 s Number of tools in the magazine: 40 Max. spindle speed: 10,000 rpm Milling spindle motor power (30 min / continuous operation): 15 / 11 kW Lower turret X-axis travel: 185 mm Y-axis travel: 1,640 mm Number of tool positions: 12 Max. speed of driven tools: 4,000 rpm Main spindle Max. spindle speed: 3,500 rpm Chuck size: Ø250 mm Spindle mount: ASA A2-8 Spindle bore: Ø86 mm Draw tube bore: Ø77 mm C-axis – max. indexing angle: 0.001° Main spindle motor power (30 min / continuous operation): 26 / 22 kW Hnjdexf Hrnjpfx Ag Nju Counter spindle Max. spindle speed: 3,500 rpm Counter spindle travel: 1,565 mm Travels and rapid traverses X1 axis travel: 555 mm X2 axis travel: 185 mm Z1 axis travel: 1,595 mm Z2 axis travel: 1,640 mm Y axis travel: ±80 mm (160 mm total) A axis travel: 1,565 mm C1, C2 axis travel: 360° (0.001° resolution) B axis travel: ±120° (240° total) B axis coupling angle: 15° X1, Z1, Z2 axis: 24 m/min Y axis: 16 m/min A axis: 24 m/min C1, C2 axis: 200 rpm B axis: 27 rpm MACHINE DETAILS Weight: 15.5 t Connected load: 93.92 kVA Dimensions: 5,550 x 2,560 x 2,645 mm EQUIPMENT - Fanuc 18iT-B CNC control - Capto C6 tool system - 40-position tool magazine - Lower turret with 12 tool positions

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Centre height: 225 mm Hnsdpfxoxlix Ds Ag Nou MACHINE DETAILS Control: Fanuc 16T

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable Hnsdpfoxg Ix Sox Ag Neu - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,000 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, travel distance X-axis: 140 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Axis Travel X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning Capacity Turning length: 750 mm Swing diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centers: 750 mm Maximum bar diameter: 52 mm Spindle Spindle speed (max.): 4,000 rpm Spindle bore: 91 mm Spindle bearing diameter: 95 mm Main spindle speed range: 60 - 6,000 rpm Main spindle drive power: 22 / 18.5 kW Maximum torque: 198 Nm Sub-spindle (B-axis) travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Turret Number of turrets: 2 Number of tool stations: 2 x 16 positions Square shank height: 20 mm Drill shank diameter: 25 mm Turret indexing time: 0.2 s Toolholder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid Traverse Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Hsdpfx Agoxgglkj Njnu Control: MSX 501 Dimensions & Weight Dimensions: 6500 x 3000 x 2500 mm Machine weight: approx. 5.1 t Total power requirement: 73.9 kVA Operating hours: 5,000 h EQUIPMENT LNS bar feeder

Condition: ready for operation (used), Year of construction: 2022, operating hours: 674 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, bar diameter (max.): 42 mm, TECHNICAL DETAILS MAIN SPINDLE Max. bar diameter: 42 mm Travel: 100 mm Spindle speed: 6,000 rpm Spindle drive power: 7.5/5.5 kW Minimum C-axis resolution: 0.001 degrees SUB SPINDLE Max. bar diameter: 34 mm Spindle speed: 5,000 rpm Spindle drive power: 5.5/3.7 kW Minimum C-axis resolution: 0.001 degrees Number of turrets: 2 UPPER TURRET Number of positions: 8 Travel X: 140 mm Travel Z: 235 mm Travel Y: 70 (+/-35) mm Driven tools speed: 5,000 rpm Driven tools power: 1.0 kW LOWER TURRET Number of positions: 6 Hsdpoxlfu Uofx Ag Nenu Travel X/Z: 140 / 310 mm Number of spindles: 2 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,220 x 1,460 x 1,700 mm Machine weight: 3,100 kg ELECTRICAL SUPPLY Total connected load: 30 kVA Operating Hours Machining hours: 674 h Control on hours: 4,953 h

Condition: like new (used), Year of construction: 2019, operating hours: 253 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, Machining centre from year 2019 with only 253 cutting hours! TECHNICAL DETAILS Travels Travel X: 800 mm Travel Y: 450 mm Travel Z: 510 mm Rapid traverses Rapid traverse X: 36 m/min Rapid traverse Y: 36 m/min Rapid traverse Z: 30 m/min Hnedpoxlip Njfx Ag Nou Worktable Worktable dimensions: 1,000 x 450 mm Maximum table load: 600 kg Spindle Head: 12,000 rpm BT 40 Tool changer: 30 positions Rotary axis 4th axis: Tsudakoma Rotary axis diameter: 160 mm MACHINE DETAILS Control: Fanuc iSeries Operating hours Cutting hours: 253 h Operating hours: 300 h EQUIPMENT Chip conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! TECHNICAL DETAILS Laser power: 4 kW Table width: 3,000 mm Table length: 1,500 mm EQUIPMENT Hedpfxjxgg Ire Ag Njnu Ridel chiller Donaldson extraction unit 2 exchange tables

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 26BB2444, No minimum price – guaranteed sale to the highest bidder! Hsdpfx Aexliwyjg Nonu MACHINE DETAILS Electrical Data Connection: 380 V / 50 Hz Rated power: 10 kVA Fuse rating: 25 A Control voltage (AC): 220 VAC Control voltage (DC): 24 VDC EQUIPMENT Coolant tank

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Rated current at full load: 5.04 A Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz Note: The machine will be available from 02/12/2025! Hjdpfx Aoxdkxiog Nonu

Condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 7,500 mm, workpiece diameter (max.): 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a complete sawmill including sharpening workshop! TECHNICAL DETAILS Max. log diameter: 1.5 m Max. log length: 7.5 m Automatic separator: RG SX Resaw: 1,300 RG Trimmer: NO/5 single-blade EQUIPMENT Primultini model 460 sharpening machine for bandsaw blades Primultini bandsaw blade beveling machine Hnodpfx Ajxgg Skeg Nou Vollmer sharpening machine Bandsaw blade end-welding device Additional sharpening machine Many saws

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Hnsdpfx Agjxlfk Nj Neu Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original machine price was approximately GBP 767,000! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Hjdpfx Agsxlcz Eo Njnu Maximum Sheet Thickness (Cutting) Steel: 30 mm Stainless steel: 30 mm Aluminium: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y parallel): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral axis repeatability (R): 0.025 mm Mean bilateral axis positioning deviation (M): 0.05 mm Edge detection accuracy: ±0.5 mm Workpiece Weight Maximum workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Table Change Time Shuttle table changeover time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: Fiber Consumption Total power consumption (incl. exhaust, cooler): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan 2nd high-pressure cutting gas channel Prepared for N2 generator Internal dust extraction system Electrical cabinet position: top (mezzanine structure not included) Note: The machine has already been dismantled, is in storage, and is no longer connected to power.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, cutting height (max.): 50 mm, product length (max.): 330 mm, product width (max.): 330 mm, production capacity: 1,000 unit/h, No reserve price – guaranteed sale to the highest bidder! Three-knife trimmer for high productivity: up to 1,000 cutting cycles per hour! TECHNICAL DETAILS Cutting thickness: 2 – 50 mm Number of knives: 3 Untrimmed format: Maximum: 330 x 330 mm; Minimum: 148 x 105 mm Trimmed format: Maximum: 300 x 300 mm; Minimum: 142 x 100 mm MACHINE DETAILS Dimensions (L x W x H): 2,260 x 1,160 x 1,600 mm Weight: approx. 1,530 kg FEATURES User-friendly LCD display Flexible processing of various product sizes Fast changeover times of less than 10 minutes Hodpfxexlzuqe Ag Njnu Advanced locking system for operator safety

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roll material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Diameter: max. 240 mm Maximum print speed: 64.2 m²/h (in express mode) Hnsdpfjxdiyfjx Ag Nou MACHINE DETAILS Dimensions & Weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg Note: The machine heads must be replaced. The seller can offer full service in this regard. The machine will be available from 02.12.2025!

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 135 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 16, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Hnjdexlffyepfx Ag Neu Machining Main spindle max. bar diameter: 16 mm Max. machining length without re-gripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. thread diameter: M6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. thread diameter: M3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm Main spindle C-axis indexing: 1° Rapid traverse Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive capacity Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 × 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input modes: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Ejection and unloading device Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant system with movable jet arms Power clamping system for main and pick-off spindle

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 50300315, product height (max.): 15 mm, product width (max.): 305 mm, product length (max.): 210 mm, paper weight (min.): 50 g/m², paper weight (max.): 200 g/m², TECHNICAL DETAILS Insert Hnedpfx Ajxdii Hsg Nou Length: min. 100 mm – max. 210 mm Width: min. 150 mm – max. 305 mm Weight: min. 50 g/m² – max. 200 g/m² Product height: max. 15 mm Envelope Length: min. 105 mm – max. 230 mm Width: min. 162 mm – max. 341 mm Flap width: min. 25 mm – max. 70 mm Speed: max. 15,000 envelopes/h MACHINE DETAILS Printed labels: 798,538 pcs Note: The machine will be available from 02.12.2025!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1200 units per shift! TECHNICAL DETAILS Production capacity: 150 units/h MACHINE DETAILS Electrical Data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra/Thin Spacer Frame Machine i-3 - CE version Warm-edge spacer manufacturing system Hsdpfxoxdibpo Ag Njnu Production of Intercept ULTRA stainless steel, ThinPlate, or BlackLine Note: The machine is available from 02/12/2025!