Used horizontal band saws - manual - cutting range 221-299mm for sale (76)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, saw band length: 2,700 mm, saw band width: 27 mm, Features: - solid saw frame made of cast steel - miter cuts 0° - 60° right and 0° - 45° left Bsdpevpuqkjfx Aprowp - hard metal saw blade guides - manual vice with quick-release lever - movable vice - mechanical blade tension with electrical blade monitoring - ergonomically arranged controls Technical data: Motor power 1.3 kW Belt speed 35/70 m/min. Vice clamping width 275 mm Belt dimensions 2700x27x0.9 mm Electric coolant pump 0.06 kW Working height 990 mm Machine weight 424 kg Machine dimensions WxDxH 0.9x1.45x1.6 m Cutting range: Round Square Rectangle 90° 240 mm 240x240 mm 310x200 mm 45° R 175 mm 170x170 mm 240x155 mm 60° R 110 mm 105x105 mm 140x100 mm 45° L 150 mm 135x135 mm 145x125 mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total height: 27 mm, coolant pump power: 80 W, saw band length: 3,420 mm, saw band width: 9 mm, Semi-automatic metal band saw (fully hydraulic) for miter cuts from 0° to 60° right and 0° to 45° left -3-part saw frame: 1. Die-cast aluminum on the front to reduce weight and vibration dampening 2. Traverse made of rectangular steel tube 120x100x4 mm 3. Cast steel on the motor side to reduce vibration -solid substructure with integrated 40 l coolant tank -Hydraulic lowering of the saw frame, continuously adjustable via a flow regulator -Automatic raising of the saw frame after the end of the cut; the lifting is automatic up to the last starting position, which saves time due to unnecessary "air sawing" -solid, hydraulic vice, can be moved on linear guides -mechanical saw blade tension with electrical blade monitoring -gear reduction gear with slanted, hardened and ground teeth -drive roller fastening using an adjusting nut -infinitely variable blade speed from 16 - 100 m/min -hard metal blade guides -solid rotary table with cutting channel to prevent damage to the table. -engraved degree scale Bsdpevph Hfjfx Aprewp -mechanical miter stops at 0°, 45° and 65° -chip removal brush integrated in the saw blade guard -electric coolant pump and coolant shut-off valves on each blade guide block -ergonomically arranged control panel -24 volt control

Condition: new, Manual band saw / self-feeding with double miter capability Cutting capacity 90° round 230 mm / flat 275 x 230 mm / square 230 mm 45° right round 195 mm / flat 190 x 190 mm / square 190 mm 45° left round 170 mm / flat 185 x 150 mm / square 150 mm 60° right round 120 mm / flat 120 x 85 mm / square 85 mm Material support height 760 mm Saw band dimensions 2720 x 27 x 0.9 mm Cutting speed 40/80 m/min Drive power 1.1/1.5 kW // 400V // 50 Hz Smallest diameter 5 mm Dimensions L x W x H 1600 x 1150 x 1477 mm Weight 370 kg - Installation of a minimum quantity lubrication system is possible for an extra charge. Bjdpfodx Nf Hex Aprjwp - Matching roller conveyor and material stops are available.

Condition: new, Semi-automatic metal bandsaw with high cutting accuracy. This machine allows for stepless 90° cuts, as well as miter cuts, from left 45° to right 30°. (Swivel range: left 45° and right 60°) Standard equipment: - Large, rotatable support table – wear-free! (The saw blade channel rotates during miter cuts) - Belt tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via a short-stroke cylinder - Height limitation of the saw frame via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – pipe) - Lowering of the saw arm via a hydraulic cylinder; stepless adjustment Bwjdpfxectgkzo Aprsp - Easy, manual movement of the clamping bar R/L - Electrical belt tension monitoring with saw blade breakage detection - Coolant pump with dual feed to the saw blade guides - Carbide saw blade guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical data: ● Cutting range: 90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm 45° L round 220 mm / flat 230 x 210 mm / square 210 x 210 mm 45° R round 180 mm / flat 205 x 160 mm / square 160 x 160 mm 30° R round 130 mm / flat 130 x 105 mm / square 105 x 105 mm ● Drive power: 1.5 kW // 400 V // 50 Hz ● Total connected load: 3.35 kVA ● Belt speed: 20-120 m/min, stepless ● Saw blade dimensions: 2910 x 27 x 0.9 mm ● Remaining piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1480 x 2000 mm ● Weight: 410 kg Price on request!

Condition: new, Year of construction: 2022, IN STOCK -- The ARG 235 plus is a manual metal bandsaw with high cutting accuracy. This machine allows miter cuts from -45° to +30° continuously (swivel range left 45° and right 60°) Technical Specifications: ● Cutting range: - 90° round: 235 mm / square: 230 mm / rectangle: 280 x 180 mm - 45° Right round: 165 mm / square: 145 mm / rectangle: 185 x 180 mm - 30° Right round: 115 mm / square: 80 mm / rectangle: 115 x 80 mm - 45° Left round: 185 mm / square: 160 mm / rectangle: 185 x 100 mm ● Drive Power Saw Blade: 0,9 / 1,4 kW / 400 V / 50 Hz Bjdpfx Asmftv Roprswp ● Saw Blade Speed: 40 and 80 m/min ● Saw Blade: 2710 x 27 x 0,9 Standard Equipment: ● Powerful saw blade drive ● Stepless adjustment of the cutting feed from the control panel ● Manual clamping of the workpiece, movable clamping stock with dovetail guide ● Easy adjustment of the saw for miter cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in different sizes or versions!

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, USED MACHINE – Manual metal band saw (hydraulic saw frame lifting), double mitre -45° – 90° – 30° Technical details: • Manufacturer: BEKAMAK • Year of manufacture: 2010 • Cutting capacity: 90° round: 270 mm; rectangular: 350 x 220 mm; square: 270 mm 45° right round: 230 mm; rectangular: 230 x 150 mm; square: 170 mm 30° right round: 150 mm; rectangular: 150 x 100 mm; square: 100 mm 45° left round: 190 mm; rectangular: 200 x 100 mm; square: 160 mm • Drive capacity Saw band drive 400 V / 50 Hz / 1.5 kW Coolant pump 400 V / 50 Hz / 0.12 kW Hydraulic motor 400 V / 50 Hz / 0.37 kW • Band speed 20 – 100 m/min • Working height 910 mm • Saw band 3160 x 27 x 0.9 mm • Dimensions 1730 x 770 x 1460 mm • Weight 476 kg Standard equipment: • Hydraulic lifting of the saw frame, which automatically returns to the preset starting position after the cut is complete • Powerful band drive via industrial electric motor with frequency inverter for variable band speed from 20 to 100 m/min • Saw frame lowering via hydraulic cylinder; infinitely adjustable • Saw frame height adjustment via limit switch • Robust, low-vibration cast frame • Quick-release vice for easy and convenient material clamping • Easy manual movement of the vice to left/right • Simple mitre angle adjustment of the saw via rotation of the saw frame Bodpoycf D Eefx Aprowp • Electronic saw blade tension monitoring with broken blade detection • Sturdy machine base with coolant tray and coolant pump • Carbide saw band guides and guide rollers • Light-duty material stop, 500 mm • Coolant pump with dual feed to the saw band guides, independently adjustable • Rotating band cleaning brush

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2.725 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. Bjdpfx Apofgyh Hsrswp

Condition: excellent (used), Year of construction: 1999, Cutting diameter round: 200 mm Saw band length: 2,830 mm Bwedpfjyvtcwex Aprop Cutting angle adjustment: 45° right/left

Condition: good (used), Year of construction: 2021, Mitre cuts up to 60° left and 45° right Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Infinitely variable band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 420 kg Ball-bearing rotary table Quick-release vice Large material support Coolant system Bedjyuyb Nspfx Aprjwp Including: Infeed roller conveyor 2x2000 mm Measuring unit 4000 mm on the discharge side with digital display

Condition: new, Technical data: Cutting range: round 0°: 255 mm square 0°: 200 x 200 mm flat 0°: 320 x 200 mm round 45°: 195 mm square 45°: 195 x 195 mm flat 45°: 195 mm round 60°: 125 mm square 60°: 125 x 125 mm flat 60°: 130 x 120 mm round -45°: 200 mm Bwsdpjd R Sipsfx Aprjp square -45°: 170 x 170 mm flat -45°: 200 x 170 mm Cutting speeds: 35 / 70 m/min Saw band: 2750 x 27 x 0.9 mm Working height approx.: 930 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 400 V Dimensions L x W x H, approx.: 2000 x 1250 x 1900 mm Weight, approx.: 350 kg Features: - Double miter saw with a swiveling saw arm from -45° on the left to +60° on the right - Ideal for cutting tubes, profile material, and solid material made of stainless steel, iron, etc. in commercial applications - Generously sized cast saw arm for vibration-free operation - With 2 saw band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw band guide for optimal cutting results - CE/IEC, German documentation and German service Scope of supply: - Saw band - Material stop - Manometer (band tension) - Saw band carbide guides - Vise with quick-release mechanism - Integrated coolant system - Hydraulic arm lowering - Motor protection switch - Automatic end stop - Base frame

Condition: new, Manual metal band saw with high cutting accuracy. This machine allows for stepless 90° cuts, as well as bevel cuts, from left to 45° and from right to 30°. (Swivel range: 45° left and 60° right). Standard equipment: - Large, rotatable support table – wear-free! (The saw band cutting channel rotates with the bevel) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via a short-stroke cylinder - Height limitation of the saw frame via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – pipe) - Lowering of the saw arm via a hydraulic cylinder; stepless adjustment - Manual lifting of the saw arm after the cut - Easy, manual shifting of the clamping jaw R/L - Electrical band tension monitoring with saw band break control - Coolant pump with dual feed to the saw band guides - Carbide saw band guides and guide rollers - Bi-metal saw band M 42 - Chip brush Technical data ● Cutting range: round flat square 90° round 278 mm / flat 340 x 275 mm / square 275 mm 45° R round 260 mm / flat 320 x 255 mm / square 230 mm 30° R round 155 mm / flat 145 x 115 mm / square 115 mm 45° L round 205 mm / flat 275 x 180 mm / square 180 mm ● Drive power: 1.5 KW // 400V // 50 Hz ● Band speed: 20-120 m/min, stepless ● Saw band dimensions: 3125 x 27 x 0.9 mm ● Remaining piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg Price on request. Bodpfxsd Dpz Ao Aprowp

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Bwjdsrah S Hspfx Aprop Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: A 23020337, functionality: fully functional, Manual tilting frame metal band saw with hydraulic saw frame lowering for mitre cuts from 0 - 60 ° right The compact machine has a manual vice with quick-release lever. The saw frame lowers at an infinitely variable speed. The machine is switched off by a limit switch when the saw cut is complete. Another limit switch monitors the saw blade tension. An ergonomic control panel enables safe and easy handling of the LZ 280 S. Features: - Professional band saw for use in workshops, metalworking shops, etc. - For cutting hollow profiles and solid materials, stainless steel, tool steel, ... - Saw frame sturdy cast iron construction - 2 cutting speeds for versatile applications - Flow regulator to regulate the lowering speed of the saw frame - Smooth, low-vibration operation thanks to the use of high-quality materials - Robust cast iron vice with quick-release lever - Ergonomically arranged control panel - Mechanical saw blade tensioning with electrical blade monitoring Equipment: - M42 bi-metal band saw blade - Mechanical band tensioning with electrical band monitoring - Carbide plates for precise blade guidance - Manual vice with quick clamping lever - Coolant device - Motor protection switch - Automatic limit switch - Workpiece stop - Emergency stop button Technical data: * 400 V three-phase motor 0.75/1.1 kW * 2 cutting speeds (33/66 m/min) * Vice clamping width 250 mm * Working height 925 mm * Saw blade dimensions 2450x27x0.9 mm * Weight 255 kg Bsdpfx Aovgbatsprjwp Cutting range in mm: 90° 220 215x215 250x155 45° R 160 150x150 160x110 60° R 100 85x85 80x95

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Manual high-performance metal bandsaw with selectable manual or hydraulic saw frame lowering. In autonomous mode, the lowering speed is continuously adjustable via the “Push&Pull” controller. By pulling the controller, the frame maintains the previously selected speed, removing the need to reset it for the next cut. Standard Features: - Saw frame made of a robust cast construction - Heavy-duty round table with cutting channel for mitre cuts from 0°–60° to the right and 0°–45° to the left - Movable vise with adjustable guide rails and quick-release lever for repeat cuts - Oil-bath reduction gearbox with bronze gear and hardened, ground steel worm - Electric coolant pump for band lubrication and cooling - Mechanical bandsaw blade tensioning with electrical blade tension monitoring - Precise blade guidance via adjustable, ground carbide plates and ball bearings - "Push&Pull" controller for adjusting the lowering speed - Rotating swarf removal brush - Precision angle scale for angles from 60° right to 45° left - Control panel with ready-to-operate indicator, main/speed selector switch, and switch for manual or autonomous lowering mode - Emergency stop button at knee height for optimal accessibility - Microswitch in the handle for starting motor and pump (dead-man function in manual mode) - Safety switch on the saw frame guard and blade tensioning carriage - Limit switch for automatic motor shutoff after cutting - Length stop for repeat cuts - Material support on the infeed side - Bi-metal saw blade - Tools and user manual Technical Data: - Pole-changeable 400 V three-phase motor, 1.1/1.5 kW - 2 cutting speeds (33/66 m/min) - Vise clamping width: 305 mm - Working height: 940 mm - Saw blade dimensions: 2750x27x0.9 mm Bwjdexcnqaopfx Aprop - Weight: 380 kg Cutting capacity in mm: 90° 255 250x250 300x200 45° R 190 180x180 190x170 60° R 110 110x110 150x110 45° L 160 140x140 170x120

Condition: new, neu Bodpsynmq Defx Aprowp ca. 10 Wochen ab Auftrags Italien 10370 € 199.1 € Schwenkrahmen 3120 mm 35/70 m/min 280 mm 240 mm 350x140 mm rund 230 mm, quadrat 200 rund 150 mm, quadrat 130 rund 200 mm, quadrat 170 830 mm 1550 mm 1400 mm 1750 mm 420 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment digital readout for mitre cuts

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 11070 € 212.54 € Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 280 mm 240 mm 420x200 mm rund 260 mm, quadrat 240 Bjdpfxsynmqwe Aprjwp rund 170 mm, quadrat 160 rund 200 mm, quadrat 180 830 mm 1600 mm 1400 mm 1800 mm 438 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Bsdsy En E Sepfx Aprjwp Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE Bjdpfx Apei D Di Serewp 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 8680 € 167.52 € Bedpfowirpvex Aprswp Schwenkrahmen 3120x27x0,9 mm 35/70 m/min 280 mm 240 mm 370x140 mm rund 225 mm, quadrat 215 rund 140 mm, quadrat 140 830 mm 1550 mm 1400 mm 1900 mm 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, type of input current: DC, Equipment: CE marking, The Bernardo HBS 275 model is one of the most renowned and highly regarded bandsaw models in Europe. Within its class of work, it is undoubtedly the best choice. This is a precise bandsaw designed for universal applications—robust, rigid, and highly reliable. The saw features a swiveling arm for cutting angles up to 60°, a tension gauge for the blade, and a coolant system. The cutting capacity is up to 225 mm round (flat: 245x150 mm). Optimal blade tension adjustment thanks to the dial-type tension gauge. Infinitely variable saw arm adjustment via a hydraulic cylinder with regulating valve. Durable, robust quick-release vise. Suitable for cutting solid and hollow materials from various metals. Two-speed motor ensures optimal power for each operation. Double bearing blade guides for perfect tracking and blade movement. Solid frame and arm construction ensure precise work without excessive vibration. Automatic cutoff after the cutting cycle (limit switch). Technical Specifications: Round cutting capacity at 90°: 225 mm Flat cutting capacity at 90°: 245 x 150 mm Square cutting capacity at 90°: 200 x 200 mm Round cutting capacity at 45° R: 160 mm Square cutting capacity at 45° R: 160 x 160 mm Round cutting capacity at 60°: 100 mm Flat cutting capacity at 60°: 100 x 100 mm Working height: 910 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Blade width: 27 mm Cutting speed: 45 / 90 m/min Coolant system pump power: 0.1 kW Motor power: 1.5 kW Motor power S1 100%: 1.1 kW Voltage: 400 V Dimensions (width): 1430 mm Dimensions (depth): 720 mm Dimensions (height): 1700 mm Weight approx.: 190 kg Scope of Delivery: Bandsaw Workpiece stop Base Blade tension gauge Quick-action vise Coolant system Hydraulic cylinder Bjdjytr Hzopfx Aprswp Emergency stop switch Automatic limit switch

Condition: excellent (used), Year of construction: 2025, machine/vehicle number: 0987, functionality: fully functional, Optimum Metal Band Saw OPTIsaw S 275NV Metal band saws with pivoting saw frame. S 275NV with continuously adjustable saw blade speed The machine was bought in 2025 and has been working for about half a year. TECHNICAL DATA Bwodpfjythuzex Aprjp Dimensions and weights Length approx. 1400 mm Width/Depth approx. 685 mm Weight 185 kg Electrical data Drive motor power: 1.1 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 90 W Machine data Saw blade speed(s): 45 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: continuously variable Adjustable Manual saw frame lifting Coolant pump

Condition: new, Year of construction: 2026, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight NETTO/ BRUTTO Bsdpfx Asvuf S Noprswp 220 kg / 284 KG Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: new, Year of construction: 2026, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Product features Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. Bwedpfxsi D Ddis Aprjp The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band size - 2720×27×0.9 mm Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Weight - 370 kg Warranty - 12 months User manual - yes CE declaration - yes Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Bodpfx Apsmrnk Ejrowp Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Cormak S200R Manual band saw for cutting in large industrial facilities. Features high accuracy metal cutting, even at 45º/60º. Bjdjfy Ttiopfx Aprswp Machine features CORMAK S-200R MANUAL band saw with EC declaration, provides cutting metal at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Appropriate arm lowering speed is ensured by a valve controlling oil flow between the chambers. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. Material is fed manually. This model is used in both low and high quantity production, and due to its solid construction allows for cutting various materials, including stainless steel, tool steel and profiles. The machine provides cutting at an angle due to rotary arm. The band saw arm is made of uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of various materials. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. The arm is equipped with an automatic blade tension sensor, at a 25° angle, thus increasing blade's durability. There is a blade cleaning brush attached to the bottom of the arm. Machine drive is transmitted through a worm drive filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds. The motor is thermally protected. Two cutting band speeds: 35 and 70 m/min. The construction: the arm, the vice and the rotating table are iron castings. Closed cooling system. The machine is equipped with a bumper with a ruler for setting the length of material cut. The base of the machine is a rigid cuboid made of steel sheets in which a fluid container with a flood coolant pump is located. Safety during cutting ensures an electrical system that meets all EC requirements. The machine is equipped with a limit switch which stops the machine after a cutting process is finished, an emergency button, and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened Technical data Type gravitational Arm raising and lowering gravitational with stepless arm lowering adjustment Band speed 36/70 m/min Cutting at an angle from 45° left up to 60° right Vice manual Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base height 890 mm Cutting band dimensions 27×0.9×2910 mm Total power 2.1 kW Dimensions (LxWxH) 1600×800×1400 mm Weight 500 kg Max. cutting range [mm] Angle 0º ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 For more information please visit our web page or contact us