Used CNC turning and milling centers for sale (660)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 92,000 h, Functionality: fully functional, turning length: 1,097 mm, turning diameter over cross slide: 455 mm, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 107 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, tool mount: 40 mm, total height: 2,130 mm, total length: 5,560 mm, chuck outer diameter: 315 mm, total width: 2,400 mm, quill stroke: 120 mm, quill diameter: 120 mm, overall weight: 8,900 kg, spindle diameter: 90 mm, We would like to get rid of our CTX500 due to a new purchase. The machine was built in 2002 and has since then done 91,535 hours for our company. The CTX500 is a 2-axis universal lathe with a partial hollow clamping device and has a chip conveyor, a tailstock, a three-jaw chuck SMW KNCS-N 315 and a tool carrier with 12 stations. It is fully functional and without any restrictions as it is and has been serviced at regular intervals. If you are interested, we could inspect the machine during a viewing and carry out a test run as it is still running as a production machine and is therefore under power. A sale would be possible immediately, handover possible in week 19 2025. Here are a few more technical details about the machine: Working area: - Swing diameter over bed track cover 680 mm - Swing diameter over face guide 455 mm - Chuck diameter 250/315 mm - Face stroke 320 mm - Longitudinal stroke 1097 mm Headstock: - Spindle head (flat flange) 220 h5 mm - Spindle diameter in the front bearing 140 mm - Spindle bore 107 mm Main drive: - Power of the three-phase main drive 23 kW - Speed range 18-3600 rpm Tool carrier: - Number of tool stations 12 (Tool holder according to DIN 69880 (VDI 3425) - Cylinder shank diameter 40 mm - Switching time 30° 0.86 sec. 180° 1.62 sec. Tailstock: - Quill diameter 120 mm - Quill holder MK 5 - Quill stroke 120 mm - Quill force max. 1400 daN Hydraulics: - Capacity approx. 30 l - Max. pressure 80 bar - Pressure for clamping device max. 80 bar Coolant device: - Capacity approx. 220 l - Pump output 1.7 kW - Delivery rate at 6 bar 20 l/min Fresh oil lubrication: - Capacity approx. 5 l Electrical connection: - Total connected load approx. 58.5 kVA - Voltage 400 V - Frequency 50 Hz Celqvm Tovzy Dtoiegt - Fuse (slow) according to VDE 0100 100 A - Permissible voltage fluctuation at 400V (+/-) 10 % Ambient conditions: - Permissible ambient temperature from +15 to +35° C - Max. relative humidity 75 % - Max Installation altitude 1000 m above sea level Weights: - Net weight of the machine without chip conveyor approx. 8700 kg - Gross weight of the machine when transported by truck approx. 8900 kg Dimensions: - Machine with chip conveyor L x W x H approx. 5560 x 2400 x 2130 mm We are of course happy to answer any further questions you may have. Please just contact us.

Condition: new, turning length: 440 mm, turning diameter: 550 mm, Siemens system Maximum Swing Over Bed 550mm Maximum Machining Diameter 450mm Maximum Machining Length 440mm Maximum Swing Over Slide 320mm Spindle "200-A2-6 NN3020-100BTR/NN3018" Spindle speed range 0-4500rpm Spindle bore 66mm Chuck Size 8''hydraulic chuck Ballscrew Specifications X-3210-THK/Z-3210-THK Linear Guide Specifications X-35-PMI/Z-35-PMI Ballscrew Bearings X-2562/Z-2562 Cjlowfqkwsqvm Tiegt X-Axis Travel 510mm Z-Axis Travel 620mm Y-Axis Travel ±50mm Tailstock sleeve travels 450mm Tailstock sleeve taper MT5# X/Z Axis Rapid Traverse Speed 24/24m/min X/Z Axis Repeatability 0.003mm Power of Servo Spindle Motor 11KW Overall Dimensions 2405*1767*1740mm Weight (Approx.) 3500KG Tailstock type Servo tailstock Power turret BMT45Y-15-364

Condition: used, Year of construction: 2008, turning length: 2,000 mm, turning diameter: 520 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 250 mm, bar passage: 77 mm, workpiece weight (max.): 1,000 kg, total height: 3,300 mm, bar diameter: 77 mm, overall weight: 17,000 kg, controller manufacturer: SIEMENS, controller model: 840 D SL, center width: 2,000 mm, distance between centers: 2,000 mm, machining diameter: 520 mm, number of spindles: 1, space requirement length: 7,700 mm, space requirement width: 4,200 mm, CONTROLS .. CNC controls SIEMENS 840 D SL BASIC FUNCTIONS .. number of spindles: 1 .. live positions: yes .. number of c-axes: 1 .. number of y-axes: 1 .. number of b-axes: 1 WORKING RANGE TURNING Cgjlqvmjwg Edhj Tist .. swing diameter (max): 520 mm .. turning diameter (max): 520 mm .. bar diameter (max): 77 mm .. worpiece length max.: 2000 mm .. workpiece weight max.: 1000 kg MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. drive power S6 40%: 33 kW .. drive power S1 100%: 45 kW .. spindle torque S6 40%: 630 Nm .. c-axis: yes X/Z SLIDE .. Y-axis travel: 250 mm .. rotating range B-axis up to: 220 ° .. rapid traverse Z: 40000 mm/min .. rapid traverse X: 30000 mm/min .. rapid traverse Y: 15000 mm/min .. tool fixture: Milling Spindle .. number of tool positions (total): 80 .. number of live positions: 80 .. - rotation speeds (max): 9000 /min X SLIDE .. X-axis travel: 600 mm TAILSTOCK .. distance betw. centers (max): 2000 mm STEADY .. design: offen .. diameter (min): 45 mm .. diameter (max): 310 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 7700 mm .. space requirements -front/back-: 4200 mm .. total height: 3300 mm .. total weight approx.: 17000 kg ATTACHMENTS (TURNING) .. self-centering chuck: 1 .. - clamping diameter: 340 mm .. tailstock: optional .. steadies (number): 1 .. chip conveyor: yes .. coolant unit: yes .. aspiration unit: yes .. hydraulic system: yes .. European CE standards: yes Equipment: - 3-jaw Autoblok 340-117 chuck Machines in good condition and still in operation 2023 B-axis overhauled (€50,000) 2024 SMW steady rest SR5-ZSW (45-310), almost new 2025 Rotary union replaced Operating hours: - NC program runs: 29200h - Spindle running: 22200h

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 27578101, WFL M30 with Promot gantry loader large tool magazine for 90 tools Cgolqvm Tstr Dtfjist with turret and subspindle SIEMENS 840C Very good condition, was overhauled 10 years ago Price free loaded

Condition: used, Year of construction: 1998, Functionality: fully functional, Equipment: documentation/manual, Mazak Lathe 5 Axis Turning And Milling X,Z,C,Y,B Type INTEGREX 50 Cslqvov Iltgem Tisgt Year 1998 Cnc Mazatrol 640 MT PC-Fusion-Cnc The Machine Is Complete With Chip Conveyor With All Documentation With 3 Cupboards Full Of Tools

Condition: good (used), Year of construction: 2016, Mazatrol smooth Control, Bar capacity 65mm, maximum machining diameter 500mm, maximum cutting length 910mm, Y Axis travel +/- 100mm, X axis 450mm, Z axis 960mm, milling power 7.5kW, milling speed 12000rpm, Main Spindle power 11kW, Spindle speed 5000rpm, Sub-spindle power 11Kw, sub-spindle 5,000rpm, 36 Station ATC, CAPTO C6 Spindle, B axis -30 ~ +190 degrees, Colqvjtwaqiem Tiogt C axis 0.0001 degrees, parts catcher, swarf conveyor, , 2 x 8” chucks

Condition: used, Year of construction: 2014, turning length: 1,000 mm, turning diameter: 540 mm, spindle speed (min.): 4,200 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,100 mm, total height: 2,820 mm, total length: 4,250 mm, total width: 2,314 mm, overall weight: 12,000 kg, CNC Multitasking Turn-/ Mill Centre CNC Control Fanuc Series 31i - A Turning diameter 540 mm Turning length 1000 mm Spindle bore diameter 52 mm Spindle nose A 2-6 Turning speed 4200 r/min Cgjlqvm Tsv Unqnjiot Milling head speed 12.000 r/min Movement X-Y-Z-axis 600 x ±80 x 1100 mm B-Axis Travel +110 / +115 mm C-Axis indexing 360° Tool Taper HSK 63 Tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2005, Lathes Travel distance X: 550 mm Travel distanceY :110 mm Travel distance z: 1585 mm turning length: 1585 mm max. turning diameter: 640 mm spindle boring: 79 mm max. turning moment: 390 NM range of revolutions till: 5000 rpm Cgjlqvm Towczp Seiet Control: Siemens 840D powerline 9 axis

Condition: used, Year of construction: 1998, turning diameter: 300 mm, bar passage: 51 mm, bar diameter: 51 mm, overall weight: 5,200 kg, controller manufacturer: MAZATROL, controller model: T-PLUS, machining diameter: 300 mm, number of spindles: 2, CONTROLS .. CNC controls MAZATROL T-PLUS BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 2 WORKING RANGE TURNING .. swing diameter (max): 300 mm .. turning diameter (max): 300 mm .. bar diameter (max): 51 mm TOOL MAGAZINE .. number of positions: 12 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 5200 kg ATTACHMENTS (TURNING) .. bar magazine: yes .. - bar diameter (max): 51 mm .. chip conveyor: yes .. coolant unit: yes Cgelqvjwg Edbjm Tiet .. hydraulic system: yes Machine in TOP condition (Service only provided by the manufacturer) - 7500h spindle hours - LNS bar loader - tool holders - 1 x Kitagawa Ø 208mm - 1 x Hainbuch jack - Exhaust air filter - Reduction tubes - Chip bucket

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, feed rate X-axis: 318 m/min, feed rate Z-axis: 660 m/min, This machine, which can be considered as new, is equipped with a HAAS control unit and has mainly worked with carbon and alloy steel in the past / HAAS bar loader included / HAAS control unit / Number of spindles: 1 / Spindle speed range: 3400 1/min / Spindle motor power: 22 kW / X-Z AXIS movement: 318 mm / 660 mm / Workpiece stroke: 76 mm / Chip conveyor / Internal cooling / Tailstock included / Gearbox (2 speeds A2-6) / Number of turrets: 1 / Number of tool positions: 12 / Max. tool diameter: 25 mm Cgjlowd Tdkjqvm Tijt

Condition: used, Year of construction: 2001, Functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Lathe 5 Continuous Axis Type INTEGREX 200Y Year 2001 Mazatrol 640 MT PC-Fusion-Cnc Cnc Celqsv Hzbqevm Tijgt The Machine Is Complete With Cutting Conveyor With All Documentation With 2 Cupboards Full Of Tools Spindle Rotation Speed 10,000 Spindle Motor Power 22 kW / 15 kW X-Axis Movement 530 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 70 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 1065 mm Z-Axis Rapid Traverse 30 m/min B-Axis Movement Continuously Adjustable 0.001° degrees Tool magazine 36 Turning diameter 350 mm Turning length 1020 mm Bar passage 65 mm Tool attachment capto c6 Tail stock available High pressure coolant Pressure value 15 bar For more information and photos please contact us

Condition: used, Year of construction: 2011, turning diameter 16 mm turning length 145 mm control Sinumerik 828 D number of spindle speeds 15000 gripping station 16 spindle speed: 15000 load magazine ILS-MUK 7012 Breuninger Irco high-pressure pump Knoll total power requirement 15 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 2.1 x 1.1 x 1.9 +Irco ILS mm Turn-mill centre for maximum precision Benzinger DoLittle B3, built in 2011 Cjlqovxa E Sovm Tijgt with short barloader Irco ILS-MUK 7012 (bar length 1200mm) Excellent conditions! - Dolittle B3 main and counter spindle with linear tool structure Tool stations: Main spindle 10 tools + 1 stop (2 blocks 5 tools each + 1 stop) Counter spindle 11 tools (2 blocks of 5 and 6 tools) Driven tools via the swivelling axis 6 tools Machine ON/OFF: 1 shift There are 10 tool blocks in total. Technical data - Traverse path X1 axis 320mm - Traverse path Z1 axis 145mm - Traverse path Z2 axis 90mm - Traverse path Y-axis 80mm - 2x C-axis - Rapid traverse speeds X/Y/Z 30 m/min - Water-cooled motor spindle 16 mm, 15,000 1/min - BENZINGER linear tool carrier system - Swivelling NC axis with 6 driven tools Accessories: Knoll high-pressure pump Hydra cooling system Suction channel Tool holder, collets 10 tool blocks

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, spindle motor power: 7,500 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, overall weight: 2,750 kg, The Mazak Quick Turn 10 with Fusion 640T control system has been overhauled in the workshop and is in very good condition. Cgelqvm Teu Auhasijt

Condition: new, NEW MACHINE // MULTIPROCESS CENTERS GMTK HR 800 / 1000 / 1200 / 1500 SIEMENS SINUMERIK ONE control system Ø over bed slide: 820 / 1,020 / 1,220 / 1,520 mm Center distance: 2,500 to 10,000 mm Max. workpiece weight: 3,500 to 20,000 kg Main spindle motor: 22 + 22 to 52 + 52 kW Max. speed: 1,260 to 2,700 rpm Max. torque: 3,340 to 12,575 Nm Cgolqvswaxapsm Tist C-axis Milling spindle motor: 27 to 46 kW Milling spindle speed: 3,000 to 5,000 rpm Max. Torque: 261 to 712 Nm Internal coolant supply 70 bar B-axis swivel range -110° / +90° Tailstock quill diameter: 180 to 320 mm Tailstock quill stroke: 200 to 280 mm Robot tool changer: Unlimited number of tools or can be configured to customer specifications Only inquiries from Germany will receive a response // Only inquiries from Germany will be processed

Condition: used, Year of construction: 1990, operating hours: 9,999 h, Functionality: fully functional, machine/vehicle number: 8153, turning length: 550 mm, turning diameter over cross slide: 240 mm, turning diameter: 240 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 3,200 rpm, spindle bore: 65 mm, overall weight: 5,500 kg, Well-functioning okuma cnc lathe. With subspindle !! Dutch language operation. IGF, super easy to program. Dnc one unit, to save programs or import from a cam program. 3200rpm, 12 position turret. 12" chuck on the main spindle, 6" chuck on the subspindle. Many tool holders. Losma extraction. Parts catcher. Cgolqvm Tjwcpu Neijt barfeeder interface. Chip conveyor, cooling pump. All manuals present. Still used daily, nice reliable and especially clean machine. Is turning bearing fits all day long. Explanation / mini course is no problem Can go from May 1, due to purchase of another lathe.

Condition: good (used), Year of construction: 2011, spindle diameter: 52 mm, Equipment: documentation/manual, Turn-Mill Center Manufacturer: Mori Seiki Type: NZ 1500 Year of manufacture: 2011, iBN: 2012 TECHNICAL DETAILS Swing over bed: 800 mm Cgjlqvmev Iy A Ae Tist Turning diameter: 300 mm Turning length: 810 mm Bar capacity/bar throughput: 52 mm Speed: 6000 rpm Spindle power: 22 kW Y-axis: +65 / -45 mm Control: Fanuc, model F31iA with MAPPS IV dialog programming Additional features: Polygon turning, RAM expansion to 1 MB, max. 1000 storable part programs, synchronous thread cutting, hobbing function on main and sub-spindles, tailstock function, holding brake on main and sub-spindles, workpiece unloading system Number of turrets: 2 Number of tool positions: 2 x 16 Pieces Speed of driven tools: 6000 rpm MACHINE DETAILS Weight: 8100 kg Connected load: 81 kVA On-time: 37,116 h on March 12, 2025 Machining time turret 1 / 2: 8,815 / 5,794 h EQUIPMENT Extensive tool selection: - 4 straight driven tools - 1 milling head - 4 angle heads - 1 double angle head - Approx. 16 static tool holders The machine has been fitted with a new main spindle bearing; its geometry is still in excellent condition. All holders, tools, and drive units are included.

Condition: used, Year of construction: 2004, travel distance X-axis: 320 mm, travel distance Z-axis: 1,250 mm, total height: 2,525 mm, controller manufacturer: SIEMENS, number of spindles: 2, space requirement length: 6,900 mm, space requirement width: 2,200 mm, CONTROLS .. CNC controls SIEMENS BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 2 .. live positions: yes Celqjwf Hgzevm Tiogt .. number of c-axes: 2 .. number of y-axes: 1 .. number of b-axes: 1 X/Z SLIDE .. Z-axis travel: 1250 mm .. X-axis travel: 320 mm .. tool fixture: Turret .. number of tool positions (total): 12 X/Z SLIDE .. Z-axis travel: 1250 mm .. X-axis travel: 214 mm .. tool fixture: Turret .. number of tool positions (total): 10 TOOL MAGAZINE .. magazin type: disc magazine .. number of positions: 32 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6900 mm .. space requirements -front/back-: 2200 mm .. total height: 2525 mm

Condition: used, Year of construction: 2000, Turning length 1000 mm Max. swing 640 mm dia. Max. turning 540 mm dia. Cgelqvop Ui N Hjm Tist Spindle bore 51 mm Max. Spindle speeds 4000 rpm (same for subspindle) Max. spindle speeds on milling spindle 6000 rpm No. of stations in tool changer 40 pcs. Control: PC Fusion 640 A Equipped with: Gantry loader 10 pcs. tool holders

Condition: used, Year of construction: 1997, max. swing over bed 890 mm max. Turning diameter over bed 830 mm centre distance 2.000 mm control SIEMENS - 840 C main spindle bore 122 mm spindle diameter in front bearing 200 mm driven tools turning speeds 1.250 U/min CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 25 UK / 2000 equipped with a turret for driven tools and tailstock. The milling drive was overhauled in 2023. Additional equipment / extensive package of tools a.o.t.: - Centering points, - Jaw sets, - Clamping jaws, - bezel - 2x 3 jaw chuck, Cjlqvmjvn U Tio Tiogt The machine videos from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 25 UK | Heynumat 25-UK | Heynumat 25 UK 2000

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D Cgjlqvm Tsu Hrbfjist main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 5 U | HEYNUMAT 5-U | HEYNUMAT 5 U 1500

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Cgsljvfxmneqvm Tiet Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. Cjlqvmsvfxmhs Tisgt The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: used, Year of construction: 1998, turning length 4.500 mm Cgslqeu Hra Ievm Tist greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm turning length 350 mm control Fanuc 18i Main-/Counter -spindle turning speeds 6.000 U/min y-axis +/- 40 mm number of tapers in turret head 12 tool holder VDI 25 Dimensions (L x W x H) 3.838 x 820 x 1.900 mm weight of the machine 4.400 kg Cslqvm Tev Htkqeiegt CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-5 with main and sub-spindle, Y-axis, turret configured for driven tools, and equipped with a bar feeder. The machine has 18.600h running hours. Scope of delivery / Accessories: Clamping devices: + 15x collets SK42 (for Hainbuch Spantop Nova) + Manual wedge bar chuck (like new) with various jaw sets (Rota-S-plus) + Various jaw sets for pneumatic chucks (Graber) Tool holders (Driven tools): + 1x double holder for main and sub-spindle + 3x axial for main spindle + 3x radial + Approx. 15x various holders for boring bars and turning tools Additional accessories: + Hydrobar bar feeder for 1.5m bars The machine is in good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-5 | 42STM | 42STM5 | 42 S TM-5

Condition: used, spindle hollow 65 mm spindle diameter in front bearing 100 mm clamping chuck diameter 165 mm max. turning diameter 200 mm max. swing diameter 420 mm turning speeds 5.000 U/min control Siemens 840 D sl CNC Turning- and Milling Center | INDEX - G200 equipped with a turret for driven tools as well as y- + B- axis. The INDEX - G200 has been overhauled by RSV-Service GmbH (including control conversion) in 2014. Cgolsvzcp Eeqvm Tist The machine only has 19.000 hours of Power-On. Further information: - Please note that the bar loader is not included in the scope of delivery! The machine videos from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G-200 | G 200