Used complete sawmills (stationary) for sale (125)

Condition: new, Solid block band saw for log diameters up to 130 cm. Soft starter included, extendable with additional sections. Automatic feed with stepless speed adjustment. Electric height adjustment conveniently operated from the control panel. 8.4-inch touchscreen LCD for height control. Equipped with telescopic log turner, log lifter, 3 telescopic angle stops with 2 extendable log clamps, powered log lifter for horizontal log feed, and coolant pump. Saw unit is suspended on both sides for greater stability and improved precision. CE certified. Technical Data: Cutting length: 6.6 m Max. log diameter: 1300 mm Max. board width: 1000 mm Max. saw blade stroke: 1080 mm Max. frame passage: 365 mm Motor ratings at 100% duty cycle: Main motor: 22 kW Feed motor: 3 kW Hydraulic unit: 7.5 kW Lift motor: 0.75 kW Saw blade size: 6500 mm x 50-60 mm Gsdpfxovrvhvo Aqijka Weight: 3600 kg Optional Special Equipment: Extension section, each 4 m 30 kW motor Pre-cutter unit Double-arm log lifter Telescopic log turner Chain log turner Log clamp Material return conveyor Material chute Sharpening machine Setting device Tarpaulin cover Extras not included in the price (Example image)

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Gsdjnygvrepfx Aqioka Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: good (used), Year of construction: 1994, Complete sawmill: Loading system + bandsaw 1100, blade 130 mm + hydraulic log carriage model EO 700 + 1 outfeed Gedsy Iuuxspfx Aqieka

Condition: used, Mobile sawmill Logosol B1001, year of manufacture 2020, very good condition, 23 HP engine, hydraulic log leveling, XL log holder, trailer kit Gkodpfx Aqovr I Hqjioa Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Jonsored Chainsaw Mill EL-600, 9m cutting length, electric motor, 5.5 kW, 600 kg, maximum log diameter approx. 500 mm Gkodpfx Aqox H Udwjiea Prices subject to change without notice; errors, misprints, and typographical mistakes excepted.

Condition: used, machine/vehicle number: G-BBS124070P, Pilous CTR750EV log band saw, very good condition, new rails, 5.5 kW, 4100 mm band length, 460 kg Godpfx Aqevw Ecgsioka Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 141-8300, cutting length (max.): 7,000 mm, saw blade width: 100 mm, year of last overhaul: 2022, Zenz BN 110 S saw with mechanization 22 kW drive motor 7 m cutting length 5 vertical supports 2 tensioners (+ 2 supports) Log lifter 4 leveling devices with claws 1 log roller 1 pre-cutter 20 l water lubrication drum PLC control Seat mounted on armrests PLC on the left - joystick on the right Mechanization, built in 2022, consisting of: Hydraulic flap frame for removal from the saw with electrically driven roller conveyor Roller conveyor with hydraulic ejectors 4 m roller conveyor All electrical and hydraulic elements can be operated from the operator's station. Gkjdpfxswhcwhj Aqiea Zenz automatic sharpening machine, type AHB No. S-1012

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, saw drive: 380 W, PRIMULTINII SIF 1600 band saw, in very good working condition. Gsdpfjyha A Tsx Aqijka

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm Gjdpfovtwzmsx Aqioka The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: used, type of input current: three-phase, cutting length (max.): 6,000 mm, cutting height (max.): 650 mm, roll diameter: 700 mm, saw drive: 27,200 W, input voltage: 380 V, conveyor belt speed: 30,000 mm/s, Equipment: documentation/manual, For sale: used but well-maintained automated wood cutting line NG-700L, manufactured in Lithuania. The machine has been lightly used and is still connected; last time it was operated about a year ago and worked without issues. The line is offered complete with: log loading ramp, receiving and sorting table, auxiliary outfeed table (roller conveyor), control cabinet, detailed technical drawing and leg layout scheme for relocation. Technical specifications: Log length capacity: 2.5 – 6 m Max. log diameter: 65 cm Gkedow N S S Aepfx Aqioa Saw wheel diameter: 700 mm Saw linear speed: 30 m/s Productivity: 1.5 – 3.0 m³/h Rated supply voltage: 380 V ±19 Maximum power consumption: 27.2 kW Log clamping and turning: hydraulic Dimension setting: programmable Line operation: operator console Additional information: The equipment is in good condition and ready for further use. Full documentation and drawings are included to facilitate transport and installation.

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, Complete fully automatic sawmill line STORTI year of production 2020 Conditon as new, complete set contain all equipment for installation as steel supports, communication walkways, air compressor with whole installation. Machinery set: - Chainbelt log loading station - Multiprisma Storti MP350 - Belt transporting/sorting station - Chainbelt transport to multiblade saw Gedpfx Aqjt H Nm Rsioka - Multiblade saw Storti MP350 - Double saw with automatic positioning Storti RM500 Whole line is fully equipped for immediate production start

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Log handling line, LINCK sawmill line, lumber sorting line with stacking system Log handling line: - Infeed - Cut-to-length - Turner - Emergency outfeed channel, possibility of log discharge - Root flare reducer (butt reducer) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 boxes LINCK sawmill line: LINCK Canter V40, year 1997 • Max. roundwood diameter: 650 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK Multi-rip saw CSMK 375-A3/B3, year 1997 Gkedpfxoyyd Tne Aqisa • Min. timber length: 3.00 m • Min. cutting thickness: 50 mm • Max. cutting thickness: 375 mm • Feed speed (frequency controlled): 25-70 m/min • Saw diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Plate • Shaft speed: 2500 rpm • Drive power per saw shaft: 110 kW • Weight (with motors): 18800 kg LINCK Turner DV 55, year 1996 • Feed speed: 36.2 m/min • Max. log diameter: 550 mm LINCK Canter V30, year 1996 • Max. roundwood diameter: 500 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK Milling unit VP34 • Min. timber length: 3 m • Max. timber length: 4900 mm • Max. milling depth: 50 mm • Max. cutting height: 120 mm • Min. board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK Saws S2 VS 66 S • Min. timber length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK Multi-rip saw S3 VSV 80-A, year 1988 • Min. timber length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Plates LINCK Horizontal saw KH1, year 1985 • Min. timber length: 3 m • Min. cutting height: 60 mm • Max. cutting height: 140 mm • Max. cutting depth, right saw: 140 mm • Max. cutting depth, left saw: 140 mm • Min. cutting depth: 130 mm • Feed speed: 40 m/min • Saw diameter: 520x5.8/4.0x150 mm Lumber sorting: Lumber sorting by length, width and thickness 32 boxes for lumber Stacking and bundling system for lumber packs The offered line has a real capacity of approximately 70 000 m3 - 110 000 m3 per year in one-shift operation. Huge spare parts inventory. Sharpening room. We offer complete service from sale to installation and commissioning in the new location. For an additional fee, professional dismantling, loading and commissioning in the new location are possible.

Condition: used, Conveyor mechanization suitable for scanning systems. Speed: up to 140 m/min. Manufacturer: Framtec (Sweden) Gjdexpgmgepfx Aqijka Year: 2014

Condition: refurbished (used), Completely refurbished Bongioanni CRL 4 tensioning wagon with clamping blocks. Track gauge 1200 mm. Rails newly milled. Servo-electric drive. Sale upon customer order. Gkodpfx Asxtwxbeqiea

Condition: used, Complete sawing line IDC000103 1. SAW group Gkjdpfsu E Hu Dex Aqioa Soderhamn Eriksson 240-12 ARI Vislanda KS12.2 2. SAW group Soderhamn Eriksson 240-12 Ari Vislanda DS74+1 3. ARI Vislanda KT5A-230 Speed up to 60 m/min.

Condition: used, Year of construction: 1991, machine/vehicle number: IDC000046, HewSaw R200 from 1991, complete with line. Description: - Log table - Step feeder - Cambio 45 - Log conveyor with pneumatic cylinders pushers on the right side - Log table before HewSaw R200 - Step feeder - Log separator - HewSaw infeed table Gkedera A Rvopfx Aqija - HewSaw R200 from 1991 - All electrical systems (Cabinets), but must be rebuilt. There is no schematics for it. - All hydraulic systems - Sharpening room, with all tollings.

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Gksdpfx Aoxg Ubyeqisa Linck resaw, max. cutting height 285 mm Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer

Condition: reconditioned (used), functionality: fully functional, A chipper canter/4-band saw/rotary gang saw line with one edger is available for sale. All the mechnical parts will be checked by our professional team before delivery to a potential customer. Worldwide transportation can be arranged. Gkjdpoxaztvefx Aqija

Condition: refurbished (used), A complete used sawline is available for sale. The first sawing stage includes an edger, and the second stage features profiling machines. All conveyors and components are included. The line will be fully refurbished mechanically; the electrical system is complete but sold as is. Please inquire for pricing and further details. Gjdpfxowa Nrpo Aqieka

Condition: good (used), the machine is in good condition, includes electrical cabinets, sharpening machine Gedpfx Aevdyr Njqiska

Condition: good (used), complete sawmill line Gkedpoqy A Hcjfx Aqioa Soderhamn//+Ari

Condition: used, Year of construction: 2000, functionality: fully functional, Trolley with belt for 1500 cm saw, log loading ramp, and 8 m board conveyor with retention. Saw motor 37 kW. Gjdpjxvpd Iofx Aqioka

Condition: used, Year of construction: 2004, functionality: fully functional, cutting length (max.): 8 mm, Equipment: cabin, Complete Artiglio log saw with Eagle 1100/I carriage. It has been maintained by Artiglio in 2018. It is in excellent condition. Gkjdpfov Sr U Eex Aqija

Condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 7,500 mm, workpiece diameter (max.): 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a complete sawmill including sharpening workshop! TECHNICAL DETAILS Max. log diameter: 1.5 m Max. log length: 7.5 m Automatic separator: RG SX Resaw: 1,300 RG Trimmer: NO/5 single-blade EQUIPMENT Gksdpfjxgg Skox Aqisa Primultini model 460 sharpening machine for bandsaw blades Primultini bandsaw blade beveling machine Vollmer sharpening machine Bandsaw blade end-welding device Additional sharpening machine Many saws

Condition: used, Year of construction: 2007, functionality: fully functional, cutting length (max.): 5 mm, overall weight: 3,000 kg, Includes: Gjdpfx Aqsv Stdbsijka -Complete log sawmill -Log loading ramp -Roller track 6 meters It is in excellent condition and fully functional