Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for rolls and strips Adhesive application station: cartridges + PU gluing Workpiece height 6-55 mm Nwedoxlz Nzjpfx Agqjp Pneumatic pressure unit Cutting unit for rolls and strips up to 3 mm (6 mm) edge thickness with adjustment of 0-10° angle of the cutting saws Milling unit, flush milling, radius milling, bevel milling - 15° Scraping unit for bevels and radii Surface scraping unit - finish Machine is CHECKED in TOP CONDITION from a very well-maintained craft business from the Lieboch warehouse

Condition: used, Year of construction: 2012, 1 edge banding machine, manufacturer Format 4, model PERFECT 710, year 2012, serial no. 200.12.004.12, touchscreen control, internal no. I440048 Njdpfx Aexzny Esgqjwp

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance Nwjdswka S Ispfx Agqsp - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: new, feed rate X-axis: 7 m/min, workpiece height (max.): 50 mm, type of input current: three-phase, input voltage: 400 V, With corner copying, suitable for plastic edges from 0.4 - 3 mm, solid wood edges up to 3 mm, and workpieces from 8 - 50 mm, with pneumatic adjustment. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Corner copying unit: Yes Scraper: Yes Buffing unit: Yes Premium equipment for high productivity with minimal space requirements! Intuitive operation with eye-S control and 10" large touchscreen: HMI Maestro Active Edge; graphical representation of all processing units and their operating status; graphical simulation of operations; control of all processing units; regulation of glue pot temperature; assistant functions for machine setup according to the processing program; error diagnosis for quick resolution of simple faults; statistics on processing parameters; USB connection; network connectivity ready; prepared for Industry 4.0 with API REST data transfer protocol. Outstanding accessibility to work units thanks to the large hood, which also provides protection and noise reduction Monoblock steel construction ensures high stability and rigidity of the machine Automatic unit positioning when changing panel thickness Cut-off saw unit with corner rounding (me 35 tr s): for trimming the edge and rounding corners on the top and bottom; for edging solid wood, trimming is done with the radius milling cutter; high-frequency motor with 12,000 rpm; saw blade Ø125mm Z12 Panel feed via feed chain with rubber sliding shoes Extendable workpiece support Adjustment of infeed fence via spacer plates Dimensions and Weights Length (product) approx. 3314mm Width/depth (product) approx. 1085mm Height (product) approx. 1300mm Weight (net) approx. 623kg Nwedpfx Agoxxvanjqep Flush radius milling unit Rated output: 2 x 0.35kW Cutter diameter: HW55.3mm Spindle speed: 12000min⁻¹ Extraction port diameter: 60mm Number of extraction ports: 2 Corner copying unit Rated output: 0.35kW Tool diameter: 58mm Speed: 12000min⁻¹ Electrical data Connection voltage: 400V Mains frequency: 50Hz Glue unit Glue pot rated output: 0.25kW Glue pot operating temperature: 190°C Glue pot extraction port diameter: 60mm Glue pot capacity: 0.8kg Pneumatic connection Operating pressure: 6.5bar Air consumption: 470l/min Feed Feed rated output: 0.55kW Feed speed: 7m/min Edges Edge thickness (coil material): 0.4 – 3.0mm Pre-milling unit Extraction port diameter: 2 x 80mm Rated output: 3kW Cutter speed: 7200min⁻¹ Diamond cutter diameter: 80mm Cutter height: 56mm Material removal: 0.5 / 1 / 1.5 / 2mm Scraper units Radius scraper: 2mm Buffing unit Rated output: 2 x 0.14kW Speed: 2800min⁻¹ Workpiece Workpiece thickness: 8 – 50mm Minimum workpiece length: 120mm Minimum workpiece width: 110mm

Condition: ready for operation (used), Year of construction: 2013, Main Drive Spindle speed range 12000 rpm This IMA NOVIMAT I /G80/390/R3 edgebander was manufactured in 2013. It features dual 4.5 kW motors at 150 Hz, achieving speeds up to 9000 rpm. Capable of handling edge heights from 14 to 65 mm and roll diameters up to 850 mm, it's ideal for precise edgebanding needs. Consider the opportunity to buy this IMA NOVIMAT I /G80/390/R3 edgebander. Contact us for more information about this machine. Nwjdsxr Rxlopfx Agqsp Application Types Edge Banding

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Nwedpfx Ajw Tivmsgqjp Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Operating Units: 9 nr

Condition: excellent (used), Edge bander Holzher Streamer 1057 Pre-milling units Glue application, GLUE JET cartridge glue system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws, angle adjustable Top and bottom milling units R1, R2 Corner rounding unit Nodpfx Agsxf H Rdsqewp Profile scraper Flat scraper Max edge banding height: 45 mm Max edge thickness in roll: 3 mm Machine length: 460 cm Feed speed: 10 m/min

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2650x640x1400 mm Nwsdpfx Aevz E T Hogqop Weight 700 kg Total power requirement 5 kw

Condition: used, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motor-driven adjustable infeed fence Pre-milling unit for panel edge preparation before the glue station, with 2 NC servo axes Syncro edge magazine, fully automatic for rolls and strips MOT3, with 2 motorized hold-down devices GLU-JET automatic glue application station; for cartridges and PUR bonding, thin film technology Glue height adjustment / touch nozzle Nwodpfxsxy Nxyo Agqsp Maximum edge height: 60 mm Pressure unit with 4 motor-pneumatically driven rollers, NC servo axis End trimming unit for rolls and strips up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0–10° angle Flush trimming unit 20 mm MOT3, motorized horizontal adjustment Multifunction milling unit MOT6 with multifunctional milling technology Flush trimming 8 mm Radius milling R1, 3; R2 (2x) Chamfer milling up to 45° Copy-milling unit MOT4, with automatic tool changer MOT2 and oscillating tracer, corner copying, postforming corners, with 4 NC-controlled axes; for top/bottom longitudinal edge milling and copy-milling of front/rear end vertical edge. Working height 60 mm. R1, 3; R2 (2x); chamfer 45° Scraper unit MOT8 incl. high gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); chamfer 45° Nesting package Flat scraper unit with pre- and post-scanning Usage-controlled, oscillating buffing unit for post-processing and edge polishing with 2 textile wheels Spraying units for infeed and outfeed, plus antistatic agent for pressure unit Infeed area electronically controlled separating agent spray device Pressure unit electronically controlled antistatic spray device Outfeed area electronically controlled cleaning agent spray unit with cleaning fluid Automatic chain lubrication Barcode scanner The machine is FACTORY-SERVICED and in TOP CONDITION Year of manufacture: 2021 / Leasing possible The machine is connected and ready for demonstration in the showroom Available from stock Lieboch

Condition: new, Year of construction: 2023, functionality: fully functional, total length: 3,774 mm, edge thickness (max.): 3 mm, overall weight: 842 kg, plate height: 50 mm, For plastic edges from 0.4 - 3 mm, solid wood edges up to 5 mm, and workpieces from 8 - 50 mm. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Scraper: Yes Buffing unit: Yes Top configuration for high productivity in a compact footprint! Intuitive operation with the eye-S control and 10” large touchscreen: HMI Maestro Active Edge Graphic display of all processing units and their operating status Graphical simulation of machining operations Control of all processing units Regulation of glue pot temperature Assistance functions for machine setup according to the machining program Error diagnostics for rapid troubleshooting of simple issues Statistics on machining parameters USB port Prepared for network connection Excellent accessibility to working units thanks to the large hood, ensuring protection and noise reduction Automatic positioning of units when changing panel thickness Panel feed via chain conveyor with rubber slip shoes Quality made in Italy Equipment details 10" touchscreen control panel Optimum machine management with the new 10" touchscreen control panel featuring Maestro Active Edge, visually representing all machine functions Pre-milling unit Two diamond-tipped cutters Glue station Glue is quickly and evenly heated by heating rods located in both the glue pot and the glue application roller Automatic temperature reduction during prolonged machine idle times Teflon-coated glue pot for easy glue changes Device for reusing unused glue Automatic application of edge banding from coils with cut-off knife for edges up to 3 mm Rotary table with Ø 730 mm Self-lubrication of the glue pot Quick-change kit for the glue pot Flush/radius milling unit With horizontal and vertical tracing rollers for optimal tool positioning Equipped with combination milling tool Ø 55.3 mm for flush milling of edges up to 5 mm and radius edges up to 2 mm Precise adjustment via 2 digital displays With chip extraction Surface scraper Absolute cleanliness for perfect finishing of the workpiece surface With rotating copying device Buffing unit Powered by two independently swiveling and height-adjustable motors For perfect cleaning and polishing of panel edges Profile scraper With digital position display Nsdpoxxuvbjfx Agqswp For perfect finishing of plastic edges With device to retract the unit when it is not needed Edge magazine For automatic application of strip edges Solid wood strip edges are automatically loaded and synchronized with the panel feed

Condition: ready for operation (used), Year of construction: 2015, This Hebrock TOP 2000 PLUS was manufactured in 2015. A used edge banding machine, it features a gluing unit, cutting unit, and combination milling unit. It handles edge material thickness from 0.5 to 3 mm and can manage workpieces from 10 mm to 45 mm in thickness. Ideal for precise edge finishing tasks. Contact us for more information about this machine. Application Types Nedoxrwf Sepfx Agqjwp Edge Banding

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: - Control unit with 10.4" touchscreen color display - Extendable workpiece support - Motorized, position-controlled pressure beam - Chain feed with feed speed of 12 m/min - Ball-bearing roller support plate, diameter = 770 mm - Double-motor jointing milling unit / 2 x 1.1 kW - Edge feed for coil and strip material, 0.4 – 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Premelting unit for EVA adhesive - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit Nwjdjw Nadtspfx Agqep - Double-motor end cutting saw unit / 2 x 0.50 kW - Double-motor multifunctional unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner processing unit - Radius scraper - Surface scraper - Double-motor polishing unit (buffing) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim

Condition: excellent (used), Hebrock 3003 Edge Bander well equipped, can be tested before purchase Initial MILLING AirTronic zero joint glueless system - hot air glue application with a roller, pneumatic preliminary guillotine pressure rollers anti-adhesive fluids finished cutting saw top-bottom milling unit, R1 - R2 pneumatically adjustable corner milling unit pneumatically adjustable flat scraper max element height 50mm Nwodpfjwmc I Dsx Agqop max veneer thickness in roll 3mm feed 10m/min power consumption 15.8KW very good condition, fully fulfills its functions

Condition: excellent (used), functionality: fully functional, total length: 9,300 mm, overall weight: 4,000 kg, Feed infinitely variable from 18–24 m/min For edge material from rolls or as strips up to 20 mm edge thickness Transport chain 80 mm wide with rubber coating Workpiece support – scissor-type, extendable up to 1000 mm Infeed extension 500 mm Feeding device with two driven, angled rollers Processing units: Jointing cutter unit with 2 motors, each 3 kW Gluing unit A20 Trimming unit HL83, chamfer/straight with 2 motors, each 0.5 kW Pre-milling unit with 2 motors, each 1.5 kW Contouring/milling unit FK, 8-position automatic, with 2 motors each 0.55 kW Multi-stage finish sanding unit MN, automatic Finish sanding unit for glue joint Buffing unit above and below with oscillation Nwsdpfjw Sdlmox Agqep Chip conveyor belt Electronic frequency inverters for processing units HOMATIC control system with NC21 input module Good condition of the machine.

Condition: used, OTT Tornado - TOP Control system: via a 15-inch color touch monitor for full automation and maximum operator comfort. CM-CombiMelt gluing system suitable for processing EVA and PUR hot-melt adhesives as well as all standard cleaning granulates. Jointing station for edging chipboard panels. Automatic roll magazine. Automatic edge magazine. Double end-trimming unit with automatic swivel 0° / 3°. Flush trimming unit for flush trimming up to 12 mm. Fine radius trimming unit – profile cutters R2 – R5. Automated copying and corner rounding unit. Scraper unit – radius. Scraper unit – radius and chamfer. Surface scraper unit. Sliding agent spray unit – PU. Cleaning set with fine buffing unit. Very stable workpiece support with roller conveyors – front with scissor extension. Complete tool set included. The machine is LIKE NEW and in EXTREMELY WELL-MAINTAINED CONDITION. First commissioned in 2009, very low operating hours – approx. 1,600. Machine from lease return / leasing option available. Nwodpfx Aoxy Iw Uogqep Available from stock in Lieboch.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Edgebanding machine HolzHer 1321, in very good working condition, regularly in use, edgebanding programs available, robust industrial machine Nwodpfoxiv Efox Agqep - Pre-milling unit/jointing with spare DIA cutter - Glue application unit, upgraded a few years ago to continuous slot nozzle, pressure section - Glue height and edge thickness fully controllable via display, compatible with cartridge or granulate, PU glue possible - Panel preheating - Separate top and bottom pre-milling units - Motorized rounding unit, adjustable for 2 mm radius - Straight/angled end trimming - Radius scraper - Corner copying unit - Flat scraper - Buffing unit Offered in ready-to-use condition. Still regularly in use until approx. week 42/43, testing is welcome.

Condition: ready for operation (used), Year of construction: 2013, This Lange B 85 K edgebander was manufactured in 2013. It features an automatic edge feed, gluing unit, pre-cutting shears suitable for roll material up to 2 mm edge thickness, a pressure zone, cutting unit, and a combination milling station. A surface scraper is also included. Consider the opportunity to buy this Lange B 85 K edgebander. Contact us for more information. Application Types Edge Banding Nwsdpfxexrwhae Agqsp

Condition: excellent (used), CATALOG NUMBER 7729 TECHNICAL DATA Equipment: - Tape holder - Glue tank (granulate) - Tape feeder - Guillotine – pre-cutting the edging - Pressure rollers 2 pcs - Min. width of processed components: 50mm - Thickness of processed components: 10-40mm - Min. internal radius: 50mm Nwedpfx Ajxaprgsgqsp - Angled gluing with 1mm thick edging, 0-45° - Edge thickness: 0.3-3mm - Electric feed - Total power: 2kW - Compressed air pressure: 6-7 bar - Dimensions (L/W/H): 1700x1300x1550mm - Weight: 310kg ADVANTAGES – Made in Poland – Unpainted – DTR technical documentation – Very good condition – used edge banding machine Net price: PLN 6500 Net price: EUR 1550 (exchange rate: 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: excellent (used), Felder G360 Edge Bander, Pre-milling cutters, Glue application by roller, Pneumatic pre-cut guillotine, Pressure rollers, Finishing saws, Top and bottom milling unit R1 – R2, Profile scraper, Polishing unit Edge thickness: 0.4–3 mm, Max. panel height: 45 mm, Feed speed: 7 m/min, Total power requirement: 2.8 kW, Nedoxy Iwbopfx Agqewp Machine length with table: 290 cm, without: 240 cm.

Condition: used, Year of construction: 2011, Type KDF 220 C Year: 2011 Unit controlled via display Gluing unit End trimming saw unit Flush milling unit Corner copying unit Radius scraper Surface scraper Edge thickness: 0.4 - 3 mm Workpiece thickness: 8-50 mm Nwsdpfx Agsxc N Hvoqop Feed rate: 10 m/min Total power: 9.5 kW Length: 4150 mm Weight: 1150 kg €19,990 incl. VAT, stated on the invoice

Condition: used, Year of construction: 2011, Price: On request Njdsxiwzzspfx Agqswp What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2011 - Documentation available: No - CE marking present: Yes - Serial number: AH/335516 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2020, operating hours: 90 h, functionality: fully functional, Available now: a high-performance Holz-Her 1308XL Edge Bander, manufactured in 2020 and maintained to a very high standard. This compact, powerful machine is perfect for shops looking for professional edgebanding results with maximum efficiency and precision. Machine Details: Make/Model: Holz-Her 1308XL Year: 2020 Condition: Excellent – low hours, clean, and well-maintained Nwodpfxoxlcfqs Agqjp Usage: Light commercial – ideal for joinery and cabinetry work Location: [Insert location] Availability: Immediate Key Features: Glu Jet system for PUR & EVA application Pre-milling unit for perfect edge prep Corner rounding for seamless finishes Touchscreen control panel with intuitive interface Fast heat-up time and energy-efficient operation Compact footprint with high-end capabilities This model offers professional-grade edge quality, ideal for kitchens, furniture, and interior fit-out production. Holz-Her’s build quality and user-friendly controls make this a standout choice for serious workshops.

Condition: ready for operation (used), Year of construction: 2022, Additional Equipment Control Panel: Smartouch 21" Control System: E-motion // control system with motorized adjustment (accuracy 0.01 mm) Chain Feed System: With automatic lubrication Top Pressure Beam: Motorized height adjustment Pre-milling Unit: 2 x 2.2 kW motors, diamond cutters, up to 3 mm removal Glue Application System: Compatible with EVA and PUR, fast heat-up (8 min) Additional Glue Tank: For fast glue change Edge Pressure Unit: 1 driven + 2 passive rollers, pneumatic control Trimming Unit: 2 motors (0.5 kW), adjustable 0–15° Nwodpfx Aoxxdutjgqsp Multi-functional Trimming Unit: 2 motors, 0.75 kW, top and bottom Corner Rounding Unit: Edge thickness 0.4 – 3 mm, panel height 10 – 60 mm, 2 independent motors, 12000 rpm This FORMAT4 Tempora F800 60.12/2 E edgebander was manufactured in 2022. It features a Smartouch 21" control panel, E-motion control system, and a chain feed system with automatic lubrication. The machine includes a pre-milling unit with diamond cutters and a glue application system compatible with EVA and PUR. Consider the opportunity to buy this FORMAT4 Tempora F800 60.12/2 E edgebander. Contact us for more information. Application Types Edge Banding

Condition: good (used), Year of construction: 2022, functionality: fully functional, Single-sided edge banding machine for applying edge banding tape with hot-melt adhesive to all four sides of a rectangular panel, including the finishing of the edge tape. TECHNICAL SPECIFICATIONS: • Feed speed: 7 m/min • Panel thickness: 8 – 50 mm • Edge band thickness (strips): 0.4 – 3 mm (optionally 5 mm) • Edge band thickness (roll, incl. covers): 0.4 – 3 mm • Max. cross-section of edge material for trimming: 150 mm² • Roller holder diameter: 700 mm • Max. projection of edge band relative to the panel: 4 (2+2) mm • Min. distance between two panels: 600 mm • Min. panel length (minimum width 100 mm) with edge tape on roll: 160 mm; with edge material in strips: 180 mm Nwedpfxjxpgxvj Agqop • Min. length of edge tape on roll: 200 mm • Min. length of edge material in strips: 220 mm • Min. panel width with edge tape on roll: 110 mm (min. length 210 mm) • Working height: 900 mm • Width for fixed panel support: 615 mm

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Edge banding machine Hebrock AKV3005DK-F with jointing, corner rounding, and two scraping blades. Very well-maintained machine from a small business, in excellent condition. Touch-screen interface with PLC control for user-friendly operation; up to 12 operating programs can be stored. Edge thickness (coil): approx. 0.4 – 3 mm Workpiece height: approx. 8 – 53 mm Feed rate: approx. 10 m/min Soundproof hood Extendable workpiece support, special feature, extendable up to 950 mm Extraction ports: 80 + 140 mm Units/Aggregates: Quick-change glue pot with glue outlet; two glue pots included (one used for EVA glue, one for PU glue), the PU glue pot is practically as new, used only for a single order. Upper pressure manual adjustment with SIKO counter Infeed fence manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Jointing cutters with Leitz Whispercut diamond cutters, still sharp Gluing unit with automatic edge feeding for coil material up to 3 mm Pressure section with 4 rollers Cross-cut saw Integrated chip container for edge offcuts Nsdpfxotpn Ete Agqewp Multifunctional milling unit, R2, with pneumatic adjustment between thin and thick edge Corner rounding mill R2, pneumatically adjustable between thin and thick edge The profile mill can also be used for shelf programs, i.e., only the straight edge is rounded, not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Lockable hood CE mark Operating manual A video of the machine in operation can be provided upon request. All indexable inserts for the milling units and scrapers have been replaced or rotated, saws have been sharpened. Machine is ready for immediate use. Only the diamond jointing cutters (Whispercut) have not been replaced, but are still sharp. Paintwork touch-ups have been done. The Hebrock AKV series is the predecessor of the current K-series. The machine has only approx. 730 operating hours (glue pot switched on), but the frequency inverters were only switched on for approx. 455 hours. Machine is in very good condition; see original photos. Machine dimensions: approx. 5000 x 1400 x 1550 mm (L x W x H) Weight: approx. 1550 kg. The machine can be inspected and demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse; see "more offers from this seller."