Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Iodjyqybuopfx Abvoap Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, working width: 1,935 mm, number of spindles: 40, plate height: 350 mm, working length: 6,200 mm, number of axes: 4, TECHNICAL DETAILS Iodpeyqx U Hsfx Abveap Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge tape magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Safety mats at the front Vacuum pump Waste chip conveyor Fixed groove unit for slotting in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8105

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Isdpjyq Avhjfx Abvsap Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Iedpfx Ajyuylujbveap Number of processing units: 10 1st unit: Spraying device Tools included 2nd unit: Glue applicator 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Radius scraping unit Tools included 9th unit: Flat scraping unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, power: 16.2 kW (22.03 HP), input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, overall weight: 2,200 kg, TECHNICAL DETAILS Number of machining units: 10 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Iaedpjyuyfzsfx Abvop Tools included 5th unit: Rough trimming unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Fine trimming unit Tools included 8th unit: Corner rounding unit Tools included 9th unit: Radius scraper unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Power: 16.2 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,415 x 1,670 mm Machine weight: 2,200 kg EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 9 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Tools included 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Iasdpfx Aoyux Riebvjp Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm MACHINE DETAILS Power: 11 kW Mains voltage: 400 V Current: 28 A Phases: 3 Frequency: 50 Hz Isdpfx Aoyux Egsbvsap Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multi-function milling unit Glue application unit

Condition: excellent (used), Year of construction: 2020, Homag Edgeteq S-200 Year: 2020 Iaodpfx Aoypm Hhebvsp Specification: Feed Speed 11m/min Machine Length 4605mm Workpiece Thickness max 60mm Edge Material Roll 0-3-3mm Edge Material Strips 0.4-5mm Joint trimming / pre-milling (44mm high blocks) Standard EVA glue unit Pressure zone with 1 main pressure roller + 2 idel rollers with pneumatic adjustment for thickness End Trim unit with pneumatic adjustment for chamfer / straight Top and bottom trimming unit with 2mm cutters Contour trimming unit with 2mm cutters Profile scraping with pneumatic adjustment with 2mm blades Additional changeable scraping heads with 1mm blades Glue Joint scraper Buffers LED indoor lighting Control system easy touch Package for construction elements Basic v Package Central Lubrication 400V 50Hz CE

Condition: excellent (used), Year of construction: 2019, Specification 2 tanks 1 cleaning station Suitable for right sided machine such as Edgeteq S-240, S-300 and S-380 400V 50Hz Iedpfx Abeypm Dgsvoap

Condition: excellent (used), Year of construction: 2019, Specification: Working height: 950mm Iedpfx Aoypm Avsbvoap Length: 4773mm Workpiece Thickness: 60mm Edge Material Roll: 0.4-3mm Edge Material Strip:0.4-6mm Adjustable Infeed Fence Workpiece Support Feed Speed 11m/min Central Lubrication Roller Top Pressure Manual Top Pressure Adjustment Separating Agent Spray Device Joint Trimming Unit 2x2.2kw Panel Pre-Heating QA65 Application unit for PUR Pressure Zone End Trim Unit Trimming Unit Counter Trimming unit Radius Scraping Unit with 2 sets of quick change heads Glue Joint Scraping Detergent Spraying Unit Buffers 400V 50Hz CE XES 200 with 2 tanks and 1 cleaning station including collecting tray.

Condition: used, Year of construction: 2010, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 161/1-10 - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes Iaodoyu Tkkepfx Abvep - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 38.85 - Fuse [A]: 50 - Transport dimensions: 5500mm x 1500mm x 2580mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, total height: 1,600 mm, total length: 3,250 mm, total width: 1,000 mm, Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 7 - └ 1st unit type: Spraying device - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit Iaedeyu Thcspfx Abvep - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 18.6 - Fuse [A]: 25 - Power [kW]: 7.2 - Transport dimensions: 3250mm x 1000mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, total height: 1,600 mm, total length: 5,250 mm, total width: 1,440 mm, Weight: 1.550 kg Edgebander HEBROCK AKV 3006 DK FS maximum edge thickness 3/8 mm min/max. workpiece thickness 10/40 mm min. workpiece length approximately 200 mm min. workpiece width approx. 80 mm feed speed about 10 m/Min. ready in about 6 minutes. maximum power consumption 12 kW electrical connection 400 V / 3 Ph / 50 Hz Pre-mill Glue unit Pressure roller Chopping saw Milling unit Milling unit Corner rounder Radius scraper Flat scraper Cleaning unit Dimensions (length x width x height) 5250x1445x1600 mm, weight 1550kg - Year: 2012 - Documentation available: No - CE certificate present: No - Transport dimensions: 5250mm x 1445mm x 1600mm (l x w x h) - Transport weight [kg]: 1550kg Financial information Iedpfewnhb Ssx Abvoap VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg Price: On request - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers Iedoyrp Uajpfx Abvsap - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, Weight: 3.500 kg Price: On request - Details: - └ Description: Includes Nordson unit built in 2017 - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 6 - └ 1st unit type: Pre-milling unit - - Type/Brand: Nordson - - Tools available: Yes Iedpfx Aboyrpvwjvsap - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Rough milling unit - └ 5th unit type: Cap unit - └ 6th unit type: Fine milling unit - Voltage [V]: 400 - Current consumption [A]: 41 - Fuse [A]: 50 - Transport dimensions: 6700mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, functionality: fully functional, operating hours: 3,900 h, Year of manufacture: 11/2005 Single owner Low operating hours Feel free to contact us if you have any questions Iaodpfoyu U Rfex Abvop

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 648, functionality: fully functional, operating hours: 347 h, power: 6.8 kW (9.25 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, total length: 4,000 mm, overall weight: 600 kg, For sale is a well-maintained Lange B90KF edge banding machine. Fully operational and still connected for trial runs. Includes extensive accessories and basic materials. Isdpfx Aoyuvk Hjbvjap Features and technical data: - Glue pot - Pressure zone - Pre-milling unit - Edge feed - Sawing unit - Milling unit - Scrapers Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Electrical connection: 400V, 50 Hz, 3Ph Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Weight: approx. 600 kg All information provided without guarantee. Price is net plus VAT. An invoice will be issued for the machine.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 80 mm, edge thickness (max.): 15 mm, height adjustment type: electric, overall weight: 7,000 kg, year of last overhaul: 2023, compressed air connection: 6 bar, power of the milling unit: 3,000 W, space requirement length: 10,500 mm, Fully refurbished Topedge Duo-melt, year 2014 2 x 3Kw each Pre-milling motors Ijdpex Nbprofx Abvsap 80 mm panel thickness 1 x Synchroflex top driven belt system 2 x Glue heads and tanks, Duo Melt system (For instant glue colour changes) 1 x rough trim station 1 x Bevel fine trim (can also be used for fine finishing wood in “flat” setting - adjustable angle 1 x Radius trimming machine 1 x AKF station 1 x 4 position per side AZK4 radius scraper 1 x Flat scraper 1 x Cleaning spray, front, middle and back - LCM 1 x Buffing station 2 x free spaces Infeed fence alignment for narrow panels Nesting package LCM iRelease cleaning system BrushTec ES - not included

Condition: excellent (used), Akzent edge banding machine V31 - Dimensions: 1750 x 530 x 600 mm - Plus additional 600 mm Ø roller table - Milling motor with disc cutter - Workpiece thickness: 10-55 mm - Edge thickness: 0.4-1 mm - 220 Volt Iaodpfeytw Ttjx Abvjp - 3.3 kW - Weight: 135 kg

Condition: used, machine/vehicle number: 008437, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Isdpfx Aeyng Agsbvjap Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment/features: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with cutter (for cuttable edges) - Three pressure rollers - Belt feed motor 0.25 kW; approx. 1250 mm length; feed rate approx. 6.0 m/min; 50 mm wide timing belt with thick, workpiece-friendly rubber coating. Digital counter for height adjustment - Direct glue application to the workpiece: leakproof glue pot with glue supply from below and fast heat-up time after machine stoppage - Flush trimming unit for front and rear workpiece edges, automatic sensing at the workpiece, pneumatic trimming with a cutter for cuttable edges - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 high-performance 0.4 kW high-frequency motors, continuously adjustable from 4000 to 18000 rpm, cutter diameter 70 mm, Z4, radius 2 mm/15°; central extraction connection Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N Iasdoytkiuopfx Abvsp - Total connected load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm (without film disc Ø 800) - Net weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2006, Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details. • Line workpiece capacity: • Length 250–3000 mm • Width 120–1200 mm • Thickness 8–60 mm • Edge bander (KAL 330) — base and transport • Continuous machine base; workpiece support with roller bar extendable ~800 mm • Transport chain 80 mm wide with rubber surface; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18–25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece overhang/supernatant 30 mm • Workpiece thickness 12–60 mm • Edge material from strip: 0.4–20 mm (max cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max cross-section: PVC 135 mm², veneer 100 mm²) • Max coil diameter 830 mm • Pneumatic connection 7–8 bar • Infeed system and controls (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic infeed (lengthwise and crosswise); for precisely sized, square parts • Stepless infeed guidance adjustment (axis), speed set at input terminal • Automatic side adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Input terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granule storage • Quick-lock system for QA/QE application unit; QA front glue storage for color change • Basic gluing unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Trimming unit HL84 with standing trimming stop for sensitive edges • Pneumatic trimming motor adjustment (2 positions: flush/level and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side trimming stop adjustment when edge thickness changes • Rough milling unit: 2 motors stacked, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: roughing with ~0.2 mm overhang / without overhang • Reserved free space for a fine milling unit • Contour milling unit Servo FK13 automatic: Isdpfxoytf Iro Abvsap • 2 motors each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-fold tool changer • Feed speed max 20 m/min; minimum spacing between workpieces 500 mm • Workpiece thickness 12–60 mm • Automatic FK adjustment for identical radii on different edge thicknesses; auto retract • FK workpiece guidance with additional clamping for min part length 120 mm (single-sided) • Finishing and cleaning • Multi cleaning unit MN21 automatic: • Up to 3 profiles; tracing from top/bottom/side for chamfer and rounding on pre-milled PVC edges • Electropneumatic air nozzles; automatic chamfer/radius changeover; auto retract of upper/lower tool • Height adjustment via top pressure • PVC shavings separator top/bottom

Condition: good (used), Year of construction: 2007, EDGEBANDING MACHINE WITH JOINTING AND COPY MILLING; RELEASE AGENT APPLICATION, MACHINE USED FOR PUR GLUING^ Ijdpfx Aoyrfh Nobvjap Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Coil material: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed rate: 11 m/min Electrics: 400 V, 50 Hz, 3 Ph. Equipment: Adjustable infeed fence Centrally adjustable overhead pressure Central manual chain track lubrication Control panel at machine infeed Release agent application Jointing unit: 2 x 2.2 kW 1 clockwise, 1 counterclockwise Max. material removal: 3 mm Gluing station with clockwise and counterclockwise operation 1 main pressure roller and 2 post-pressure rollers End trimming unit: 2 x 0.18 kW Pulling cut for high precision Pneumatic adjustment for straight and chamfer cutting via program Flush milling unit: 2 x 0.55 kW With vertical and horizontal tracing 2 working positions selectable via program: flush and radius milling, all axis adjustments with digital counters for quick setup Profile milling unit: 2 x 0.35 kW For profile milling of edge corners Max. edge thickness: 3 mm Max. workpiece thickness: 55 mm With pneumatic 2-point adjustment for chamfer/radius Scraper unit with quick-change heads Tracing above, below, and laterally With 2 additional quick-change heads Glue line scraper device, Pneumatically controlled Tracing above and below Cleaning agent application Buffing unit: 2 x 0.09 kW With cleaning agent application Control system: POWER CONTROL PC 20 +

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Iedpsynpc Nefx Abvoap Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details. • Adhesive application: Hot/cold melt adhesive process; application roller with synchronous and counter-rotation • Edge thickness: 0.3–10 mm • Workpiece thickness: 8–60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar • Feed power: 3.0 kW • Feed speed: 14–20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air speed (minimum): 20 m/s • Compressed air consumption: approx. 300 l/minProcessing units / equipment on the machine: • Joining: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combi-melt gluing unit: • Top-mounted, changeable hopper for EVA, PUR hot melt adhesive or cleaning granulates; hopper volume 2.5 l • AKM (automatic edge magazine): • Automatic edge magazine with optical monitoring for strip edges in fixed lengths • Capping: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush milling: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided probing; 2 carbide-tipped indexable knife heads HF70, Ø70 x 20 x 16, z=4 • Fine milling (bevel 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided probing; 2 carbide indexable insert cutter heads HF70, Ø70 x 20 x 16, z=4 • AWSR (radius R2–R5): • 2 quick-change sets for fine milling cutter, 2 x 0.3 kW; 2 carbide indexable insert cutter heads AR73 x 16 x 16, z=3, R2–R5 Iedpsyn I U Rsfx Abvjap • AKF (copy milling): • Automated copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper blade: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment device • PU set: • 5-way spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent), fine buffing device with cloth disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes