Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale is our FORMAT4 tempora F400 45.03 L edge banding machine from Felder, used in our furniture workshop. The machine was purchased in 2019. The equipment includes joint milling, trimming, flush trimming and radius milling, corner processing, as well as radius and surface scraping blades and polishing units. PERFORMANCE DATA According to the total counter of the machine control system, as of October 30, 2026: • Piece counter: 24,696 Gbods Ahmv Aopfx Aanjw • Total edge length processed: 22,186.4 m • Operating time of chain conveyor: 415 hours 58 minutes • Operating time of main switch: 4,996 hours 3 minutes The counter readings are documented in the attached display photo. The operating time of the main switch is shown separately from the actual operating time of the chain conveyor. EQUIPMENT • m-motion control system with a 10-inch smartouch touchscreen • Jointing unit with plunge-controlled diamond cutters • Teflon-coated gluing unit for 1.5 kg of EVA granules with synchronized gluing roller • Pneumatically controlled pressure unit • Guillotine shear for roll edge material from 0.4 to 3 mm • Miter saw unit with 0°/10° cutting selection • Upper and lower flush trimming and radius milling units with manual adjustment • Corner processing unit for post-forming and softforming profiles • Radius scraping blades, top and bottom • Surface scraping blades, top and bottom • Polishing units, top and bottom • Release agent spray device • Extendable workpiece support • Edge magazine with rotary table, diameter 740 mm TECHNICAL DATA • Workpiece height: 8–45 mm • Roll edge thickness: 0.4–3 mm • Feed rate: 9 m/min • Minimum workpiece length: 140 mm • During corner processing: workpiece height 10–45 mm and minimum workpiece length 270 mm • Jointing depth, manually adjustable: 0–2 mm • Electrical connection: 400 V / 50 Hz INSPECTION AND PICKUP Location: Neuwied. Inspection by appointment only. Pickup only. Transportation and loading must be arranged in advance.

Condition: good (used), Year of construction: 2003, used edge banding machine Model Hebrock AKV 3003 DKF Year of manufacture 2003 Direct glue application to the workpiece including joining unit Support divider for edge material Gjdpfx Aae Ahpbqonebw High-frequency miter saw Chip collection box (miter saw) Pneumatic roller trimming Transport chain with permanently screwed-on special chain plates Double roller pressure (ball-bearing mounted) Outrigger (extendable towards the front) Automatic central lubrication (miter saw, corner milling cutter) Quick-heating glue tank (maintenance-free, Teflon-coated) Maintenance-friendly and operator-friendly design Corner milling cutter Surface trimming blade Chip collection box (trimming blade) Max. edge thickness 8 mm min/max. workpiece thickness 10 / 40* mm Min. workpiece length approx. 200* mm Min. workpiece width approx. 70* mm Feed speed approx. 10 m/min Ready for operation in approx. 6 min Max. power consumption 12 kW Electrical connection 400 V / 3 phases / 50 Hz Dimensions (length x width) 4300 x 1400 mm Dimensions (height) 1620 mm Weight 1250 kg

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge bander (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Adhesive technology used: EVA hot melt adhesive in granular form (GlueJet, interchangeable station), L-Tronic laser (interchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), edge rounding unit (2 motors, CNC-controlled), sanding units (profile and flat), infeed system (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edging thickness: 15 mm Maximum edging thickness in roll form: 3 mm Maximum edging height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Minimum height: 1814 mm Maximum height: 2230 mm Workpiece infeed height: 877 mm Machine weight: 4200 kg Electrical minimum connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Zero joint: infrared Electric height adjustment: YES Top conveyor belt pressure unit: YES Maximum feed rate: 25 m/min Infinitely adjustable feed rate: YES Preheating zone: YES Spray nozzles: YES Machine documentation: YES Operating hours: 8,788 h Total number of edged panel sides: 1,138,998 pieces Godez I R Snspfx Aansbw Total length of edged material: 966,123 m Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU

Condition: used, Year of construction: 2005, machine/vehicle number: 5819, functionality: fully functional, power: 5.8 kW (7.89 HP), input voltage: 400 V, height adjustment type: mechanical, Equipment: CE marking, documentation/manual, For sale is a professional and reliable Hebrock Euro 2000 (Plus) edge banding machine from 2005. The machine is in very good, fully functional condition. The glue pot is in perfect condition and heats up quickly and cleanly. The machine can be tested and demonstrated on-site while powered. Features & Highlights: Manufacturer: Maschinenbau Hebrock GmbH (Made in Germany) Model: Euro 2000 / Plus Year of manufacture: 2005 Machine no.: 5819 Glue pot: Quick-heating hot melt glue container (heating time approx. 6 minutes) – fully functional and clean Cutting unit: Pneumatic roller cutting / sawing unit for precise trimming of front and rear edges Routing unit: High-frequency flush and radius routing unit (flush, bevel, and radius routing) Operation: Ergonomic control panel with digital adjustment for quick format and edge changes Edge material: Suitable for roll and strip material (e.g. ABS, PVC, veneer, wood strips) Chassis / Transport: Includes device for easy transport within the workshop Technical data: Connection: 230 / 400 V – 50 Hz Power consumption: 5.8 kW Current: 11.6 A Feed speed: approx. 10 m/min Extraction nozzle: Ø 100 mm Gbjdpfxe Ah Sgrj Aanjw Included: Dust extraction system with filter bag (see pictures). Condition & Collection: Condition: Used, well-maintained, ready for immediate use. Test run: A test run / demonstration on-site is highly recommended and can be arranged by appointment. Location: 65719 Hofheim am Taunus Sale: Collection by buyer. Loading is possible on-site using a forklift / pallet truck. Legal note: Sale is made excluding any warranty or liability for defects.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Stefani Solution XD Year of manufacture: 2017 Technical data Feed speed: 25 m/min Board thickness: 8-60 mm Edge thickness: 0.3-22 mm Rolled material: up to 3 mm Edge trimming unit Gluing unit Cutting unit Flush trimming unit Corner rounding unit Profile trimming blade Surface trimming blade Gsdpfe Aiglbox Aansbw Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100 mm, 4x80 mm including the piping shown in the picture to 200 mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Top pressure with manual adjustment using a crank and SIKO counter Infeed guide with manual adjustment and SIKO counter Jointing cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color change from white to transparent Gluing section with automatic edge feed for roll material up to 3 mm Pressure zone with 3 rollers Miter saw with 2 motors Combination routing unit, easily adjustable by hand for flush trimming, chamfering and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking Operating manual as a folder All indexable inserts of the routing units and trimming blades have been renewed or resharpened, saws have been sharpened, diamond jointing cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been renewed, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses have been renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider". Gbsdpezn Afpsfx Aanow

Condition: used, Year of construction: 2013, machine/vehicle number: 2365, functionality: fully functional, power: 10.5 kW (14.28 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece width (max.): 2,500 mm, workpiece length (max.): 3,200 mm, height adjustment type: mechanical, feed rate X-axis: 10 m/min, actuation type: manual, total height: 1,650 mm, total length: 4,300 mm, total width: 1,500 mm, overall weight: 750 kg, year of last overhaul: 2021, Equipment: CE marking, documentation/manual, The machine has always been well-maintained, and even minor repairs were carried out by Santen & Marzeion from Heede when necessary. Over the past 4 years, the edge bander has been used very little. Due to the owner's retirement, the carpentry business is being closed down, and I would like to sell this reliable Hebrock machine. The model features 2 jointing cutters, an infeed belt, a squaring shear, a flush saw, a flush router, a rounding router, and saw blades. Questions are welcome. Gjdpfx Aeznwyzeanebw

Condition: used, Year of construction: 2022, machine/vehicle number: AH00003901, functionality: fully functional, input voltage: 400 V, input current: 37 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 60 mm, height adjustment type: electric, actuation type: electric, overall weight: 2,650 kg, Equipment: CE marking, documentation/manual, used SCM Stefani KD edgebander in HP configuration, year 2022. The machine is in excellent condition and can be seen running. Units: RT/E pre-milling unit with diamond cutters (H 64 mm) VC800 gluing unit with pre-heating for EVA glue Automatic edge feed from coil and strips K/SEL end trimming unit, tilting 0–15° R-HP Multiedge tilting trimming unit for 2 radii (4-axis positioning) Round K corner rounding unit R-HP Multiedge radius scraper for 2 radii and RAS/V scraper RCA/2C flat scraper Buffing brushes Additional equipment: Startouch 12" control, ready for a barcode reader Top pressure belt instead of wheels, which protects matt and gloss panels Gbedpfs Aifpwex Aanjw Easy Size (automatic infeed fence positioning) Spray units for anti-adhesive, cleaning and gliding agents Infrared ceramic lamp 1700 mm extendable support for workpieces up to 2200 mm wide Copying wheel kit for nesting panels CE Technical data: Feed speed: 10–20 m/min Panel thickness: 8–60 mm Coil edges: up to 3 × 45 mm Solid wood edges: up to 8 mm

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 2306_16_4003, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, type of input current: DC, edge thickness (max.): 2 mm, feed rate X-axis: 20 m/min, total height: 850 mm, total length: 1,000 mm, total width: 700 mm, overall weight: 170 kg, SCHUGOMA System TMS_8462 – mobile edge banding machine for zero-joint technology – Siemens control For sale is a mobile edge banding machine for zero-joint technology from SCHUGOMA System GmbH, model TMS_8462, manufactured in 2016. The machine has hardly been used, is in very good condition, and is ready for immediate use. It features a Siemens control system and is suitable for woodworking companies, carpentry shops, and furniture manufacturers. Gjdpfx Aas Adqr Honsbw This is an interesting opportunity for companies looking for a scarcely used machine for professional zero-joint technology. The machine can be inspected on-site by appointment. Interested parties can personally verify its condition and operational readiness.

Condition: excellent (used), HOMAG KDF650 edge banding machine Top pressure beam for material clamping, Application of liquids, Pre-milling cutters, Glue application, Preheating unit with glue pot QA65N Additional glue pot Pneumatic preliminary trimming guillotine, Pressure rollers Final trimming cutters, R1-R2 top and bottom milling unit 2x R1-R2 corner rounding unit Multi-profile cycling cutter R1-R2 Flat cycling cutter, Application of liquids Polishing unit, Nesting The machine has NC control; all settings and functions are controlled from the control panel. Max. component height: 60 mm, Max. edge band thickness (roll): 3 mm, Gbodpj Aiuidsfx Aanow Feed speed: 8-18 m/min The machine is in very good condition and is only slightly different from a new machine. Operating hours: 1048 h

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm, solid edge up to 6 mm Workpiece height: approx. 10 - 60 mm Feed speed: approx. 10 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for easy operation of the machine 4 programs can be saved. Machine in Highflex design, highly automated, switching from thin edge to thick edge via programs Units: Extended infeed zone Chain track central lubrication, pneumatically manual Glue pot quick-change device, one glue pot currently installed Top pressure, manual adjustment, PU rollers Infeed guide, manual adjustment with SIKO counter for chip removal Jointing cutter with dia cutters, sharpened Contact heating shoe for preheating the board Gluing section with automatic edge feed for roll material up to 3 mm, switchable for forward and reverse operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Cutting saw with 2 motors, straight cut or bevel cut (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, chamfering, and rounding Corner rounding cutter R2 with dia cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Joint trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking All indexable inserts of the milling units and trimming blades have been renewed or re-sharpened. Saws sharpened, dia jointing cutters sharpened. The machine is therefore ready for immediate use. Only the dia cutter of the profiling cutter has not been renewed, but is still sharp. Original paint, only a few spots have been touched up. The machine unfortunately does not have an operating hour counter, but it still looks very good. Very good condition, see original photos Gbodpfxezzqwmo Aanjw Machine dimensions approx. 4550 x 1250 x 1550mm (LxWxH) Weight approx. 1400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), Year of construction: 1995, functionality: unexamined, power: 7.5 kW (10.20 HP), type of input current: three-phase, actuation type: electric, total height: 1,400 mm, total length: 5,200 mm, total width: 1,400 mm, overall weight: 1,500 kg, year of last overhaul: 2021, Edge gluing from 0.6 to 13 mm Cartridge gluing Pre-milling Fine milling Cutting twice Pull knife Godpfx Aasz A Dhronsbw Smoothing Year of manufacture is estimated Machine was stored a year ago Until that time, it was fully functional.

Condition: used, Year of construction: 1999, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 20 m/min, total length: 9,200 mm, total width: 1,600 mm, overall weight: 4,000 kg, Equipment: CE marking, For sale: OTT Euromatic edge banding machine Machine data: * Year of manufacture: 1999 * Machine length: 9,200 mm Godpoz S U S Iofx Aanebw * Machine weight: approx. 4,000 kg * Maximum edge thickness: 60 × 15 mm * Edge thickness up to 20 mm also possible (by adjusting the flush trimming unit) * Minimum workpiece width: 60 mm * Minimum workpiece length: 160 mm Equipment: 1. NC-controlled infeed fence 2. Joining milling unit 3. Glue application 4. Pressure zone 5. Miter saw (swivels 15°) 6. Flush trimming unit 7. NC-controlled chamfer milling cutter (0–3 mm) 8. Rounding milling cutter R2 9. Corner copying unit R2 (postforming processing possible) 10. Rounding scraping blades 11. Surface scraping blade 12. Oscillating buffing unit 13. NC-controlled upper pressure bridge Notes: * The dust extraction system is not included in the sale. * The machine will be disassembled by us and delivered to the workshop door. * Loading can be arranged upon request (not included in the purchase price). * The removal of the machine must be organized by the buyer and will be at their own expense. * Sale due to the purchase of a new machine. * Available from the 1st week of December 2026. * The machine can be inspected and tested at any time by prior appointment.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, feed rate X-axis: 20 m/min, total height: 1,500 mm, total length: 8,850 mm, total width: 1,250 mm, overall weight: 4,000 kg, year of last overhaul: 2021, Equipment: documentation/manual, Nabízíme k prodeji použitou, repasovanou olepovačku OTT PROFIMATIC PM 2508-F, určenou pro olepování hran tavným lepidlem PUR a EVA. Stroj je plně funkční. Stroj má elektronicky řízený agregáty na konci stroje nově instalovaný frézovací agregát pro drážky, falce a různé jiné frézování. Stroj je v pravostranném provedení a je určen k olepování dýhových, umělohmotných a masivních hran. Stoj je vybaven předfrézovacím agregátem (2 motory) pro frézování čelní plochy. Gbeds Aa Aqyjpfx Aanew Jedná se o jednostrannou olepovačku s obsluhou z pravé strany, určenou pro nalepování a opracování hran z dýhy, umělé hmoty a masivních hran. Technické parametry Tloušťka hrany: 0,2 - 20 mm Minimální šířka pracovního dílce: 70 mm Minimální výška pracovního dílce: 8 mm Maximální výška pracovního dílce: 60 mm Minimální délka dílce: 150 mm Provozní napětí: 400 V / 50 Hz Průběžná rychlost: 10-20 m/min Nanášení lepidla: válec pro nanášení lepidla s dávkovací automatikou Vario Melt - lepidlo EVA + tavný PUR Stroj kompletně olepí nábytkové dílce včetně rožkování. Pracovní výška: 880 mm Připojení stlačeného vzduchu: 6 bar / 1/4" Rozměry stroje Výška: 1 500 mm Šířka: 1 250 mm Délka: 8 850 mm Hmotnost: 4 000 kg PUR balíček: obsahuje rychlovýměnnou hlavu a trychtýř Stroj prošel v roce 2021 repasem v závodě OTT v Lambachu. Tuto skutečnost jsme schopni doložit dokumenty. Po repasování byl do stroje nainstalován nový software, nová řídící jednotka a obrazovka. V případě zájmu jsme schopni poskytnout veškeré dostupné technické podklady, potvrzení o provedeném repasování stroje a další související dokumentaci. Na vyžádání rádi zašleme také videa stroje z provozu.

Condition: excellent (used), Year of construction: 2011, Edge banding machine Manufacturer: Biesse Type: Akkron 440 Year of manufacture: 2011 Edge band thickness: 0.4 - 3 /10 mm Workpiece thickness: 10-60 mm Feed rate: 18 m/min Workpiece thickness adjustment: Electric Overall length: approx. 5,100 mm Gluing unit: Yes Trimming saw unit: Yes Flush trimming unit: Yes Corner copying unit: Yes Radius trimming blade: Yes Gbodpfjzltbijx Aansw Straight trimming blade: Yes Scraping unit: Yes Spray device: Yes

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 340-0 / 511, functionality: fully functional, Machine available from November 2026 Sold on behalf of a customer Workpiece length min. 180 mm Workpiece width min. 60 mm Edge thickness (coil stock) 0.4 - 3 mm Edge thickness (strip stock) max. 15 mm - Multi-edge magazine (Ostermann) - 1888 Control panel - Motor-adjustable infeed guide, PLC controlled - 1961 Pre-milling unit - 1901 Edge magazine, fully automatic - 1905 Glue station for granules & cartridge with storage hopper Processing of EVA & PUR adhesives - 1913 Pressing unit with pneumatic, adjustable pressure. Adjustment based on edge thickness, motor-driven, PLC controlled - 1918 Trimming unit 2, motor-driven, pneumatic adjustment 0 - 12° - 1823 Flush trimming unit, up to 15 mm - 1942 Multi-milling unit, flush, chamfer, radius, pneumatic - motor-driven, PLC controlled - 1983 Corner rounding unit - 1929 Radius scraping unit - 1964 Surface scraping unit - 1940 Buffing unit - 1856 Spraying system, front for release agent, rear for cleaning agent - Extendable support - Dimensions L/W/H 5920 / 1250 / 2170 Gbjdpfx Asz Hpi Aeanow - Weight approx. 1825 kg

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! Assemblies and Units Gbsdpfx Aae Af Hp Denow Number of units: 9 1st unit – Pre-milling assembly 2nd unit – Gluing assembly Manufacturer of the gluing assembly: Nordson 3rd unit – Pressure rollers 4th unit – Cutting assembly 5th unit – Rough milling assembly 6th unit – Milling assembly 7th unit – Fine milling assembly 8th unit – Milling assembly 9th unit – Milling assembly TECHNICAL DETAILS Gluing system: Glue pot MACHINE DETAILS Voltage: 400 V Current consumption: 69 A Fuse rating: 80 A Dimensions & Weight Dimensions (L x W x H): 9,000 x 1,050 x 2,100 mm Weight: 6,000 kg Number of transport packages: 4 EQUIPMENT Tools for pre-milling assembly Tools for pressure rollers Tools for milling assembly Includes PUR unit

Condition: used, Year of construction: 2019, HOMAG EDGETEQ S-380 / KDF 650 C (1650 E), year of manufacture 2019 Feed rate: 8–18 m/min. Workpiece thickness up to 60 mm, depending on application limits. Edge material: rolls 0.3–3 mm, strips 0.4–12 mm. Working height 950 mm, compressed air minimum 6 bar. Equipment: Joint milling cutters (2 × 2.2 kW), QA65 gluing unit with pressure zone, BALTI hot-melt unit, trimming unit, multi-stage and profile milling cutters, profiling and glue joint trimming blade, edge trimming unit and spraying equipment. Meter readings according to the photo dated October 22, 2026: 1,780 hours of processing time, 5,495 hours of feed time. Gbodpfx Ae Ah Rcasansw The EDGETEQ is offered separately. Location: Basel area, Switzerland. Inspection by appointment only. Price upon request.

Condition: used, total height: 1,750 mm, total length: 5,650 mm, total width: 1,100 mm, Year of manufacture: 2001 Colour: White Weight: 1.950 kg - Year: 2001 - CE marking present: Yes - Serial number: 468/0-103 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Type/Brand: 1961 - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: 1906 - └ 3rd unit type: Pressure rollers - - Type/Brand: 1913 - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: 1823 - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Type/Brand: 1942M Gbsdj Ai Ek Ajpfx Aanow - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Type/Brand: 1923 - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Type/Brand: 1964 - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 6 - Max. panel thickness [mm]: 50 - Min. panel width [mm]: 65 - Min. panel length [mm]: 180 - Max. feed speed [m/min]: 11 - Type of glue: PUR - Min. spindle speed [rpm]: 12000 - Max. spindle speed [rpm]: 18000 - Voltage [V]: 400 - Current consumption [A]: 37 - Fuse [A]: 50 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Felder TEMPORA F600 edge banding machine Liquids Pre-milling cutters, Roller glue application, Godps Aira Hsfx Aanebw Replaceable tank, Second tank included, Pneumatic guillotine for pre-trimming, Liquids, Final trimming cutters, Top and bottom milling unit, Dual unit for corner rounding, Profile edge finishing, Cleaning liquids, Flat edge finishing, Polishing unit, The machine features NC control, Max. element height: 60 mm, Max. veneer thickness (roll): 3 mm, Feed rate: 10 m/min, Inspection and testing on-site are possible.

Condition: excellent (used), Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Voltage: 400 V Frequency: 50 Hz Current: 31.7 A Power: 12.3 kW Machine number: 3141 Year of manufacture: 2016 Gbodpfjz Afctex Aanjw PLC control with touchscreen The asking price is 20,500 euros net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 1349, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 850 mm, edge thickness (max.): 60 mm, total height: 1,725 mm, total length: 7,540 mm, HOLZ-HER Variant 1446 5.10 Year of manufacture: 1997 Edge banding machine, single-sided Working range according to brochure: Edge thickness: 0.3 - 30 mm Workpiece thickness: 6 - 60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Feed rate: 8/16 m/min (depending on configuration) Listing for machine search platform HOLZ-HER Variant 1446 5.10 Edge Banding Machine | Year of manufacture 1997 For sale is a HOLZ-HER Variant 1446 5.10 edge banding machine in used, functional condition. The machine was used in the production of door elements and is ideally suited for the economical edge banding of panel materials and solid wood components. Technical data Manufacturer: HOLZ-HER Type: Variant 1446 5.10 Year of manufacture: 1997 Machine no.: 151 / 9-704 Edge thickness: 0.3 - 30 mm Workpiece thickness: 6 - 60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Feed speed: 8 / 16 m/min Compressed air connection required Equipment Edge magazine Glue application station Pressure zone Trimming unit Gbsdpo Adrgfofx Aanew Further equipment according to machine configuration

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1000042371, functionality: fully functional, Biesse Akron 1130 J Machine Number 1000042371 Year of Construction 2020 Panel height mm 8 - 50 Gbsdpfxj Ahuqpe Aanjw PVC/ABS mm 0.4 - 3 Multi-Velocity Kit 9 m/min Adjustable working height Variable inlet guide Side roller with idle wheels for panel support RT01 grinding group Coiling plate Infrared lamp to heat the edge SP01 hot-melt adhesive bonding group Edge pressure group on straight profiles with pressure rollers IT01 tilting adjustment unit RF01 2-axis tilting motor group AR01 multifunction rounded-edge group (edge trimmer + deburrer) RB01 edge scraper group RC01 glue scraper group SZ01 brush group ADZ01 anti-adhesive spray group Electrical and mechanical predisposition for PUR adhesive system Pro-Nesting Kit LPT01 cleaner liquid nozzle spray group

Condition: used, Year of construction: 2018, IMA TUBES FILLER COMADIS C945 Tube filling machine with automatic tube feeding, print registration and a heated product hopper. Built in 2018; with only a few working hours. CHARACTERISTICS - Production hopper: 26 L heated hopper with cover (AISI 316L) - Dose adjustment: piston stroke with graduated scale - Dosing unit described: Pneumatic volumetric spear-valve unit, AISI 316; standard range stated as 15-300 ml Gbjdpfxe Aihdhe Aanow - Product level control: Ultrasonic level regulator; 24 V signal for an external feed pump - Heating system: specified up to 60°C - Scraper stirrer: specified at 35 rpm PARTS - 1 set of Hot Air size parts for tube diam. 16 mm - 1 set of Hot Air size parts for tube diam. 50 mm - 1 set of size parts Delrim (POM) tube holders for tube diam. 16 mm - 1 set of size parts Delrim (POM) tube holders for tube diam. 50 mm - 1 coding block with spacers for plastic/laminate tube (8 digits places as standards) - 5 set of digits 0-9 for plastic/laminate tubes PRODUCTION - Mechanical cycles: up to 45/min - Standard tube dimensions: Diameter: 10-50 mm; Length: 60-250 mm - Machine filling-volume range: 2-300 ml nominal platform range; subject to dosing unit and size parts - Mechanical speed: 10-45 cycles/min (actual output depends on application) - Machine layout: 9-station rotary table; 1 filling nozzle

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Gbodjwlbxlspfx Aanjw Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading