Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :220 mm Travel distance Z: 220 mm max. workpiece size X: 1000 mm max. workpiece size Y: 550 mm max. workpiece size Z: 220 mm max. workpiece weight: 750 kg table size X: 680 mm table size Y: 450 mm with AWF ( Automatic Wire Feeding ) Rcodpfx Ahjvyzgao Usk U / V axis: 350mm / 220mm submerged

Condition: good (used), Year of construction: 2016, X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Rcedpfx Ahow Tc Hfj Ujk Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm Redjw Spa Nopfx Ah Ujck total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) # Working table height: 935 mm # Mechanical weight: 1900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Installed capacity: 30 kVA Rsdpfsxx Nkyjx Ah Ueck # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: WORKING # Safety light barrier – needs replacement

Condition: excellent (used), Stroke X-Y-Z 500 x 350 x 300 mm Workpiece dimensions 1050 x 800 x 295 mm Rodpfx Ahexl A Ais Ujck Workpiece weight 1500 kg U+V-Axis +/- 21 mm Misc. accessories MARCELS MASCHINEN AG

Year of construction: 2019, operating hours: 8 h, condition: ready for operation (used), This 4-axis Mitsubishi EA28V ADVANCE die-sinking EDM machine was manufactured in 2019. It features a CNC Mitsubishi Advance M700 with a 15” touchscreen, pre-installed 3D CAD/CAM software, and supports Parasolid 3D file imports. The machine offers X/Y/Z travels of 650 × 450 × 350 mm and a C-axis with an EROWA quick-release system. Consider the opportunity to buy this Mitsubishi EA28V ADVANCE die-sinking EDM machine. Contact us for more information about this machine. Application Types Rjdpsx D Enfefx Ah Ujck EDM

Condition: used, Year of construction: 2003, Diesinking / EDM Rsdpevyzf Nofx Ah Uock Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 300 mm table size X: 500 mm table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 530 mm max. workpiece size Z: 300 mm max. electrode weight: 50 kg max. workpiece weight: 500 kg electrode changer: 4 - time generator: 64 Ampere drop tank control Charmilles

Condition: repair required (used), Manufacturer: FANUC Tip: A04B-0221-B201 Rodpoik Hb Tjfx Ah Uock The condition of the machine is unknown, it does not work, it is for sale in this condition, !!! We do not know what is the probleme!

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm Rcodpfx Asw Spbtsh Uek max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2009 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (out of tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control unit Rodpfxoxggdmj Ah Ujck Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine is cleaned and fully overhauled after receipt of order. You will receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training services.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 3R-656.31-3P, -NEW- System 3R and Erowa measuring probe. Rcodpfx Ahjv A T Izs Usk Measuring probe consists of the following parts 1. 1 x ITS50 or Macro HP holder 2. 1 x Renishaw measuring probe with protection against collision in all axes 3. 1 x Renishaw M4 measuring stylus with ball dia 3 or 5 mm 4. 1 x Spring loaded locking screw 5. 4 x Adjustment screws

Year of construction: 1989, condition: used, Erodiermaschine, gebraucht Baujahr: 1989 Bitte kontaktieren Sie uns für weitere Informationen und Bilder über mail(at) oder Rcsdpfx Aheit Rqis Uek *

Condition: used, Year of construction: 2007, Diesinking / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 350 mm table size X: 600 mm table size Y: 450 mm max. workpiece size X: 650 mm max. workpiece size Y: 420 mm max. workpiece size Z: 250 mm Rcedpfx Ahovt Syks Uok max. workpiece weight: 400 kg cooler

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. Rcjdpfxovwa Nbo Ah Ujk For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: reconditioned (used), Year of construction: 1999, operating hours: 25,984 h, machine/vehicle number: 125128, In very good condition: Refurbished Charmilles Roboform 2000+ completely refurbished with 16-fold RTC changer. Extensive maintenance performed: all air-valves and tubing replaced, filters replaced, motors refurbished with new bearings and cleaned up, fans replaced, screen replaced. Optionally floppy drives can be exchanged for USB drives. C-axis seals have been replaced and is accurately aligned again. This is a 64A machine. Software and documentation is provided, onsite installation including warranty can be discussed! Tested and fully functional. Can be viewed and tested in working order. Rjdpfxjw Ad Ide Ah Uock

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, total height: 2,372 mm, total width: 1,731 mm, total length: 1,000 mm, table width: 630 mm, quill stroke: 250 mm, table length: 400 mm, workpiece length (max.): 800 mm, workpiece width (max.): 500 mm, workpiece height (max.): 265 mm, GF AgieCharmilles FORM 20 Year of manufacture: 2017 AC-FORM HMI control Travel distances: X=350 mm, Y=250 mm, Z=250 mm Max. workpiece size: X=800 mm, Y=500 mm, Z=265 mm Max. workpiece weight: 200 kg Max. electrode weight: 50 kg Distance table – chuck: 230 – 480 mm ISPG generator – working current 80 amps Best achievable surface finish Ra 0.1 µm Linear glass scales with 0.05 µm measuring resolution Incl. pneumatic chuck Erowa ITS 50 Incl. 4-position electrode changer in the magazine Rcjdpfx Ahjxf Dvqo Uok Machine weight (net): 2,000 kg Machine dimensions (L x W x H): 1000 x 1731 x 2372 mm The machine will be cleaned, serviced, and subsequently tested upon receipt of order. We are also happy to commission the machine for you.

Condition: excellent (used), Year of construction: 1996, General Characteristics Total weight: 5,000 kg Maximum height: 2,900 mm Movements X-axis travel: 800 mm Y-axis travel: 600 mm Redjxwmbtspfx Ah Usck Z-axis travel: 500 mm Positioning resolution: 0.001 mm Min/max traverse speed XYZ: 0/900 mm/min Standard glass optical scale Work Tank Dimensions (LxWxH): 1,500x1,000x600 mm Table dimensions: 1,200x800 mm Maximum distance between table and electrode holder spindle: 230/730 mm Table-to-floor distance: 750 mm Electrode Electrode weight on Z-axis: - Interface system: 350 kg - With C-axis and spindle: 50 kg Workpiece Maximum workpiece weight on table: 4,200 kg Maximum workpiece dimensions: 1,450x950x500 mm Dielectric Tank Capacity: 1,600 l Filtration system: paper filter Work tank capacity: 1,050 l Generator Maximum working current (peak): 128 A Pulse type: ISOPULSE Machine equipped with: • Multifunction remote control • Measuring cycles • Contouring • PROGRAM EXPERT 2 • PILOT EXPERT 2 • SPAC generator Year of manufacture: 1996

Condition: used, Year of construction: 2010, Diesinking / EDM Travel distance X: 300 mm Travel distance Y :250 mm Rsdpfxsvtfwpo Ah Ujck Travel distance Z: 250 mm table size X: 500 mm table size Y: 350 mm max. workpiece size X: 740 mm max. workpiece size Y: 470 mm max. workpiece size Z: 150 mm max. electrode weight: 5 kg max. workpiece weight: 550 kg electrode changer: 4 - time Fire extinguishing system

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Rcsdpfx Aouuz Iijh Ujk Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: used, Year of construction: 2010, Wire erosion / EDM Travel distance X: 500 mm Travel distance Y :350 mm Travel distance Z: 250 mm max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with AWF ( Automatic Wire Feeding ) submerged Rcedswpgc Ropfx Ah Ujk

Condition: used, Year of construction: 2000, Diesinking / EDM Travel distance X: 825 mm Travel distance Y :680 mm Travel distance Z: 405 mm table size X: 1200 mm table size Y: 850 mm max. workpiece weight: 3000 kg electrode changer: 50 - time Generator POCON 60 Quill holder: EROWA heavy duty adapter O module Rcedpfxsvtfn Uo Ah Uok halogen light

Condition: used, Year of construction: 2002, Diesinking / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 315 mm Rcodsvtfn Ijpfx Ah Usk table size X: 576 mm table size Y: 400 mm max. workpiece weight: 500 kg C-axis quill chuck: EROWA

Condition: used, Year of construction: 2018, Diesinking / EDM 3D metal printer Laser Type / Power: Yb Fibre Laser / 250 W Rjdpfx Ajvtftwsh Usck Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: used, Year of construction: 2018, Wire erosion / EDM 3D metal printer Laser Type / Power: Yb Fibre Laser / 250 W Rsdpfxovtftko Ah Ujck Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 500 mm Travel distance Y :350 mm Rcsdpfx Ahsw S Egfs Usk Travel distance Z: 300 mm max. workpiece size X: 1050 mm max. workpiece size Y: 800 mm max. workpiece size Z: 295 mm max. workpiece weight: 1500 kg table size X: 780 mm table size Y: 630 mm with AWF ( Automatic Wire Feeding ) U / V axis: 42 mm generator: 50 Ampere submerged