Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018 Gujdjxwmacopfx Akhsi

Condition: used, Year of construction: 1991, functionality: not functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, With a small investment, it can be made operational again, but the new owner could also use it for spare parts (all its electrical boards are intact, but the pump system and wiring system require repair). Gjdpfo Aifnqsx Akheui The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision of the German Matra machine tool engineering.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm Gedoztyxdspfx Akheui TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: used, Year of construction: 2020, Wire erosion / EDM Gjdps Ahq Hdofx Akhoui Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 220 mm max. workpiece weight: 500 kg with AWF ( Automatic Wire Feeding ) U / V axis: 90 x 90 mm working hours approx: 5973 h - Fully operational - Wire diameter: 0.10–0.30 mm - Maximum wire feed speed: 420 mm/s - Maximum wire spool size: 8 kg - Wire tension: 3–23 N - Maximum cutting angle: ±15° at 120 mm workpiece height - Floor-to-table distance: 900 mm - Work tank dimensions: 860 × 690 mm - Machine dimensions: 2,020 × 2,310 × 1,990 mm - Machine weight: approx. 2,750 kg - Power supply: 11 kVA, 3-phase, 50/60 Hz

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table length: 850 mm, Agie Charmilles Spirit 3 tömbös szikraforgácsoló (akár bérbe is) AKCIÓS ÁR: 9.900,- EUR + Áfa (Régi ár: 17.500,- Eur+Áfa) A gép hibátlan. Folyamatosan szervizelt a hivatalos magyarországi márkaszerviz által. 2009-ben, újonnan került beszerzésre a Galika GmbH-tól. A gépet első perctől kezdve ugyanaz a két dolgozó üzemeltette és tartotta karban. A gépen kopó alkatrészeket, egyes meghajtó motorokat, csapágyakat cseréltek az évek során. Gyártási év: 2008 Integrált C-tengellyel és integrált elektróda tárral Vezérlés: multitasking operációs rendszerrel és objektum Gsdjz I Tivepfx Akheui orientáltgrafikus kezelő felülettel ( AEP Spirit ) Asztalméret: 850×650 mm Mozgástartomány: X:550 Y: 400 Z: 350 Gépméret: 1800x1900x2200 mm

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Gsdpjzr D Dnofx Akhoui

Condition: good (used), Year of construction: 2016, The machine is in good technical condition, testing can be arranged by prior agreement. Guedpfx Aj Aibu Tekhsi

Condition: excellent (used), Year of construction: 2001, operating hours: 27,265 h, functionality: fully functional, Charmilles Roboform 35 with QCRI robot Year of manufacture: 2001 Operating hours: 27,265 X, Y, Z travel: 355 x 255 x 305 mm C-axis with Erowa chuck Erowa chuck on the table Erowa probe Magnet 3 x aluminium Erowa pallets 320 x 320 mm 35 x electrode holders 50 x 50 mm QCRI robot 4 x pallet positions on the table Guodpfx Aksyh E A Nshsi 54 x electrode holder locations Documentation and diskettes Machine powered up for inspection

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, Charmilles Roboform 350S Year of manufacture: 2007 Sink EDM machine in a C-axis configuration Fixed table with a lowerable tank Travel ranges (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Guedpfe Ait Svox Akhei Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Includes pneumatic chuck Erowa ITS 50 / 3R Systems / Hirschmann (optional) Maximum electrode weight: 50 kg Without electrode changer Charmilles DPControl operating interface Operation via 12" LCD color touchscreen Keyboard and hand-held control unit also available Machine dimensions: 1900 x 1690 x 2522 mm Total weight: 2800 kg The machine has already been cleaned, serviced, and a successful erosion test has been performed. We would be happy to commission the machine at your location and provide operator training. Optional: - Transportation - Cooling unit - Dielectric fluid - Clamping devices

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: System 3R-292.3 + 3R-272HP, overall weight: 5 kg, load capacity: 7 kg, The vise has a clamping width of up to 100 mm and a load-bearing capacity of up to 7 kg. The vise is fully functional and has seen little use. It can be purchased as a complete set with a 3R-272HP leveling head. Gsdpfx Ako Aa Rfrjhjui There are only signs of wear on the movable clamping jaw, where a small cut from wire erosion is visible, but this does not affect the clamping performance or accuracy. See the pictures!

Condition: excellent (used), Year of construction: 2017, operating hours: 12,300 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 6 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours 12,300h Gedpfx Aksz I Symoheui Technical data: Travel ranges: 455x300x300mm Workpiece table 820x400mm Tank size 900x520mm Filling height 300mm Distance table/electrode holder 150/450mm Workpiece weight max. 800kg Dielectric fluid max. 700l Dimensions WxDxH 2160x2000x2610mm Machine weight 2500kg Mains connection 3/N/PE 400/230 50Hz Power consumption 6.7 kVA Equipment: Color: Light/Gray Control interface MF30 V3.2 Touch screen display Generator, exogenous 60A Direct measuring system in all axes Cartridge filter Cooling unit integrated CO2 extinguishing system C-axis 100/min., holding brake Manual control panel with accept button Lowering tank, automatic positioning Chuck Erowa Warranty 12 months Transport Commissioning on site Training

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. Gujdpfx Akoz Uwf Aohoi We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: excellent (used), Year of construction: 2022, operating hours: 20,771 h, functionality: fully functional, travel distance X-axis: 1,010 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 700 mm, overall weight: 12,500 kg, For sale: Gedpj Accv Ujfx Akhjui Ingersoll Gantry 1200 Year of manufacture: 2022 Machine table size: 1630mm x 1130mm Maximum table load: 7500kg Electrode changer: 30-position Total weight: approx. 12000kg Maximum bath height: 650mm minus 40mm FCS plate (not included in the price) Dielectric fluid height max. 610mm

Condition: ready for operation (used), EDM MACHINE – Waldmann & Weigel ER 400 T (for broken taps and other applications) - Model ER 400 T - Current: 16 Amperes - Total power requirement: 6 kVA - Electrode diameter, max.: 1 - 25 mm / 6 steps - Thread diameter (external), max.: 2 - 40 mm / 6 steps - Various collets and electrodes - Coolant pump - Transport trolley - Documentation Gedpfxe Afm A Dj Akheui Dimensions: L x W x H 0.7 x 0.6 x 1 meter / Weight: 90 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, For sale: SODICK CNC wire-cut EDM machine - Model: AQ325L LN 1W Gsdsz Iywaopfx Akheui - Year: 2002 - Serial No.: 1320 The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o. It was used for machining workpieces weighing up to 5 kg and for various toolmaking applications. Thanks to its precision, it operates with the accuracy of a measuring machine. It is connected to the power supply and ready for operation.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.33 mm (including KIT 70) Wire EDM machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for comfortable setup Including AGIESETUP 3D Including automatic wire changer AWC (using 2 wire spools) VISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg Gusdpe Ah D U Aefx Akhsi The machine has already been completely cleaned, overhauled, and thoroughly tested. You will receive a 6-month warranty on the machine. We would also be happy to perform an individual test for you on the CUT 3000. Includes operator training at Techma on your overhauled machine. We would also like to offer you the following options: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Year of manufacture: 2015 Completely overhauled August-September 2026 EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld, multifunctional hand-held control unit Manual eroding with Powertec handheld EAGLE Powertec - fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 420 x 300 x 300 mm Guodpfx Akoz Azk Hshei Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 650 x 500 x 340 mm Work table (W x D) 550 x 470 mm Load capacity 500 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system The machine is currently undergoing overhaul. Original images will follow. 09.11.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, total height: 2,100 mm, total length: 1,000 mm, total width: 1,000 mm, table width: 300 mm, overall weight: 900 kg, table length: 600 mm, table load: 200 kg, Equipment: cooling unit, documentation/manual, Machine in working order. Gujdpo Ahqybofx Akhoi

Condition: used, Year of construction: 2006, operating hours: 6 h, machine/vehicle number: E5694, workpiece weight (max.): 800 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 320 mm, total height: 2,330 mm, total length: 2,100 mm, total width: 2,675 mm, table width: 600 mm, overall weight: 5,000 kg, table length: 450 mm, feed rate X-axis: 5 m/min, input voltage: 200 V, quill diameter: 125 mm, cutting speed: 5,000 mm/min, travel speed (max.): 5,000 mm/min, Equipment: documentation/manual, Machining Time: 5:36 X/Y/Z Axis Movements 450 mm × 300 mm × 320 mm Longitudinal (X), Cross (Y), Vertical (Z) Maximum Workpiece Weight 800 kg Work Table Dimensions (W × D) 600 mm × 450 mm Guodpfo Ahxx Sjx Akhsi Work Tank Internal Dimensions (W × D × H) 800 mm × 550 mm × 350 mm Electrode Bracket - Table Distance Between 230 mm and 550 mm Maximum Electrode Weight 50 kg Simultaneously Controlled Axes 3 Axes (X, Y, Z) Minimum Input Increment 0.001 mm (1 µm) Continuous Feed Rate 5,000 mm/min Weight 5000 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: July 2026 Excellent condition, very few operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn rapid programming Powertec handheld, multifunctional handheld control unit Gjdpfx Aozvctpokheui Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High Speed Jump: max. 18,000 mm/min. Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system 24.09.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, AGIE CHARMILLES CUT 20 CNC wire erosion machine Manufacturer: GF AgieCharmilles Model: CUT 20 Year of manufacture: 2008 Control: AgieCharmilles CNC control Machine type: CNC wire erosion machine Travel ranges: X-axis: 350 mm Y-axis: 250 mm Z-axis: 250 mm U/V axes: ±45 mm Working area: Max. workpiece dimensions: 900 × 680 × 250 mm Max. workpiece weight: 400 kg Max. taper angle: ±25° at a workpiece height of 80 mm Wire erosion system: Wire diameter: 0.15–0.30 mm Automatic wire threading Godpfxez Rz D Is Akhoui Machining in a water bath Dielectric fluid: Deionized water Wire speed: approx. 30–330 mm/s Machine data: Connection voltage: 380 V / 50 Hz Machine weight: approx. 3,000 kg Machine dimensions: approx. 3,000 × 2,100 × 2,300 mm (L × W × H) Equipment: - CNC control AgieCharmilles - Automatic wire threading - U/V axes for taper machining - Dielectric fluid and filter system - Wire collection container - Handheld control unit According to the previous owner, the electronics have been extensively refurbished, with work carried out by Charmilles technicians.

Year of construction: 2001, condition: used, Control: AGIEVISION. Disconnected since 05.11.2026, operational until then, fully functional. Inspection possible by appointment. Guodpfx Ake Ai Tznjhsi

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,700 mm, table width: 600 mm, table length: 800 mm, overall weight: 3,550 kg, product length (max.): 2,600 mm, number of axes: 3, Die-sinking EDM machine manufactured in 2010. This AgieCharmilles FORM 30 features a table length of 800 mm and a table width of 600 mm. It offers an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles FORM 30 machine we have for sale. Contact us for further details. Gsdpfx Ake Afwyvshjui

Condition: excellent (used), Year of construction: 2005, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, Control system: AGIEVISION Table dimensions: 600 x 450 mm Guodszk Ibzepfx Akhei Max. table load: 400 kg Max. travel ranges: 350 x 250 x 350 mm (X/Y/Z) 28-position tool magazine C-axis integrated: 60 RPM CO2 extinguishing system Year of manufacture: 2005 Approx. 16,000 erosion hours The machine is fully functional, ready for operation, and connected.

Condition: used, Model: VL600Q Gsdpfx Aj Aifmtskheui Year of manufacture: 2018 Machine number: TO314 Machine type: CNC wire erosion machine Control system: Sodick LN2W Technical specifications X-axis: 600 mm Y-axis: 400 mm Z-axis: 270 mm U/V-axis: 80 × 80 mm Max. workpiece size: 990 × 670 × 265 mm Max. workpiece weight: 850 kg Max. taper angle: ±15° Wire diameter: 0.10–0.30 mm Work tank: approx. 1,040 × 780 mm Machine weight: approx. 3,140 kg Description For sale is a Sodick VL600Q CNC wire erosion machine, manufactured in 2018.