Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, feed length X-axis: 230 mm, feed length Y-axis: 25 mm, feed length Z-axis: 150 mm, workpiece diameter (max.): 300 mm, nominal diameter: 130 mm, TECHNICAL DETAILS Control: Siemens 840 D Nominal module in steel with approx. 600 N/mm² tensile strength: 4 Largest tooth width: 25 mm Largest nominal diameter: 130 mm Largest helix angle when using 125 mm diameter cutting wheels: ± 45° Workpiece with internal gearing Nominal module in steel with approx. 600 N/mm² tensile strength: 4 mm Largest tooth width: 25 mm Largest swing diameter: 300 mm Largest inner diameter: 130 mm Tool Largest permissible cutting wheel diameter: 175 mm Cutting wheel holder – diameter: 1.5 inches Cutting wheel holder – taper in the shaping spindle: PKP 45 hollow steep taper – Bauer Crslq Ajwc Tg Ne H Nyob Travel paths Radial (X-axis): 230 mm Manual transverse column adjustment (Y-axis): ± 25 mm Adjustment range of the axial slide (Z-axis): 150 mm Workpiece table Outer diameter: 168.14 mm Bore: 65.532 mm Spindle spindle Largest stroke length (V-axis): 30 mm Spindle axis adjustment range: ± 0.25° MACHINE DETAILS Length: 6,435 mm Width: 4,560 mm Height: 4,400 mm Weight: approx. 11,000 kg

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 100 mm, feed length Z-axis: 300 mm, spindle speed (max.): 1,500 rpm, controller model: IBH CNC, TECHNICAL DETAILS Axial slide travel Z-axis: 300 mm Radial slide travel X-axis: 140 mm Cutter travel Y-axis: 100 mm Tailstock travel W-axis: 420 mm Workpiece data Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Max. workpiece length: 400 mm Milling parameters Cutter diameter: 40 - 102 mm Maximum cutter length: 230 mm Milling arbor diameter (standard): 16 - 32 mm Milling coordinates Z-axis: 100 - 400 mm X-axis: 100 - 150 mm Y-axis (milling spindle end face): 50 - 230 mm Celq Aswcrnxj H Nyorb W-axis (tailstock end face): 165 - 585 mm Speeds Cutter speed B-axis: 0 – 1,500 rpm Workpiece speed C-axis: 0 – 350 rpm Feed rates X-axis: 3,500 mm/min Z-axis: 3,500 mm/min Y-axis: 4,000 mm/min W-axis: 5,500 mm/min V-axis (gantry loader): 80,000 mm/min Swivel range Shift milling head A-axis left/right: 50° / 60° MACHINE DETAILS Weight: 6 t EQUIPMENT - CNC control IBH - Loading device - Various accessories

Condition: used, Year of construction: 1989, max. wheel diameter 150 mm Colq Aewhq Egs H Nyerb max. module 5 min. module 0,5 weight of the machine ca. 10.000 kg dimensions of the machine ca. 6500x 2700x 3600 m

Condition: good (used), Year of construction: 2005, Functionality: unexamined, machine/vehicle number: 29406, Lot consists of: (1)CNC Gear Shaping Machine Position consists of: (1) CNC gear shaping machine Technical Details/Technical Details: English: max dia 130mm, max face width 25mm, min/max module 0.5-4, strokes 500 - 2,500 1/min, spindle dia 85mm, CNC Siemens Sinumerik 840D, 400V 50Hz 49kW, LxWxH 6.4x4.5x4.4m, weight 12to Parts Gantry System and/or Cranes are not included in the scope. Crslq A H Nev R Tmteyeb German: max. diameter 130mm, max. face width 25mm, min./max. Module 0.5-4, strokes 500-2,500 rpm, spindle diameter 85 mm, CNC Siemens Sinumerik 840D, 400 V 50 Hz 49 kW, LxWxH 6.4 x 4.5 x 4.4 m, weight 12 tons Parts gantry system and/or cranes are not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, Cjlq A H Nswgahuoyjrb roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Gebr. gear grinding machine - spiral bevel grinder Make: Gleason Crelornntvoq A H Nyeb Type: 275 G Year of construction: 2006

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 27498, feed length X-axis: 230 mm, feed length Y-axis: 170 mm, feed length Z-axis: 400 mm, gear diameter: 130 mm, spindle speed (max.): 1,200 rpm, TECHNICAL DETAILS Gear diameter: max. 130 mm Gear width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Work spindle swivel angle: ± 45° Cslq A H Newc Tdujysrb Tool change swivel angle: 90° Workpiece Largest module (in steel with approximately 600 N/mm²): 4 Largest swing diameter (not millable): 480 Smallest number of millable teeth: 3 Tool Largest hob diameter: 130 mm Largest cutter length (depending on cutter arbor diameter): 220 mm Cutter arbor diameter: 16 / 22 / 27 / 32 mm Cutter arbor taper: ISO Workpiece spindle – WS External turning range: 160 mm Bore: 63 mm Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-travel: 230 mm Y-travel: 170 mm Z-travel: 400 mm Spindle Cutter speed (infinitely variable): 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control system Control system: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space required: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V V Frequency: 50 Hz Machine power consumption: approx. 56 kVA EQUIPMENT - Bosch CC 220 CNC control - Continuously variable cutter speed control - Large travel range in all axes - High flexibility thanks to a wide range of modules

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5- K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm -Accessories: including extensive accessories see photos -Machine dimensions: 2300/1460/H1870 mm Cslq Aov Dtmmo H Nyjrb -Dimensions accessories: pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Condition: used, Year of construction: 1988, max. wheel diameter 150 mm gear width . mm Cslq Aewhq Eae H Nysrb max. module 5 min. module 0,5 Control . total power requirement . kW weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: used, Year of construction: 2002, max. wheel diameter 130 mm gear width 25 mm max. module 3 min. module 0,5 work-spindle diameter 85 mm strokes - infinitely variable 500 - 2500 Hub/min stroke 30 mm The machine is incomplete and is being sold as a spare parts carrier. The following parts are not included in delivery: - Counter-holder unit - Siemens PCU50 - Hydraulic unit - Workpiece clamping - Chuck See photos for scope of delivery. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well Cjlq A Hjv N Ra Is Nyerb as subject to prior sale!

Condition: excellent (used), Year of construction: 2006, max wheel Diameter: 275 mm gear width: 58 mm max mod.: 8 min mod.: 0.5 machine weight: 10t max nr. of teeth: 200 min nr. of teeth: 5 Crslqsinblwj A H Nyob

Condition: excellent (used), Year of construction: 2004, CNC Gear Hobbing Machine Horizontal Croljqaf U Toq A H Nysb . no tailstock, just for chuck parts . max. gear diameter: 90 mm . max gear width (b): 50 mm . max module: 3

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Crjlq A Hswf Ihgs Nysb Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 1971, Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Staehely, high-performance gear hobbing machine type SH651 -Working area: Ø max. 650 mm Crjlq A Hov D Dk Ao Nysb -Max. cutter diameter: 160 mm -Accessories: including extensive accessories see photos -Machine dimensions: 1600/2510/H2440 mm -Machine weight: 5300 kg -Dimensions accessories: Cabinet 355/890/H1415 mm pallet 1200/800/300 mm -Weight accessories: 820 kg

Condition: used, Year of construction: 1987, max. wheel diameter 150 mm gear width . mm max. module 5 Cjljwhq Afoq A H Nyerb min. module 0,5 Control . total power requirement . kW weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: used, Year of construction: 1971, Pfauter gear - gear hobbing machine vertical P400 Gear milling machine Manufacturer: Pfauter Germany Model: P 400 Year of manufacture: 1971 Control type: conventional Cjlqjvwcb Te A H Nyorb Wheel diameter - max.: 400 mm Wheel width: 290 mm Module - max.: 6 Module - min.: 0.5 Voltage: 220/380 V Frequency: 50 Hz Dimensions approx.: 2400 x 1650 x 2400 mm Total power requirement: 20kvA The machine is in a well-maintained original condition. The complete, detailed documentation is available. Inspections under power can be carried out at short notice. We are happy to answer any further questions you may have. Price, ex warehouse here plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as seen Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: like new (used), Year of construction: 2004, power: 44 kW (59.82 HP), More Photos coming soon hob cutter: -Largest permissible tip circle diameter: 80 mm Largest toothed length: 70 mm Largest total length: 240 mm Taper for trimming with counter bearing steep taper 1:3, 4286 Mounting diameter of the collet: 32 mm Sliding paths: Radial (X-axis): 100 mm Tangential (Y-axis): 160 mm Axial (Z-axis): 300 mm Tailstock (Z4 axis): 350 mm Loading gantry (X5 axis) 3800 mm Largest milling head swivel angle: Direction +A: 40 degrees Direction A: 40 degrees Workpiece spindle: Outer diameter: 160 mm Bore: 63 mm Overall dimensions of the machine: Length: 9130 mm Width: 3895 mm Height: 3200 mm Gain of the machine: 8400 kg Feed rates: X and Z axes: 1 to 10000 mm/min Y axis: 1 to 5000 mm/min Rapid traverse: X, Z and Z4 axes: 10000 mm/min Y axis: 5000 mm/min X5 axis: 150 mm/min Speeds: Tool: 300 to 4000 min^-1 Workpiece spindle: 0 to 1000 min^-1 Operating voltage: 400 V Supply voltage: 230 V Control voltage: 24 V Frequency: 50 Hz Connected load of the machine: 48 kVA Cable cross-section: 35 mm2 Fuse protection: 70A wälzfräser: -Großter zulassiger Kopfkreissdurchmesser: 80 mm Groste verzanne Lange: 70 mm Größte Gesamtange: 240 mm Kegel zum Abstutzen m Gegenlager Steilkegel 1:3, 4286 Aufnahmedurchmesser der Spannzange: 32 mm Schlitterwege: Radial (X-Achse): 100 mm Tangential (Y-Achse): 160 mm Axial (Z-Achse): 300 mm Reitstock (Z4-Achse): 350 mm Ladeportal (X5-Achse) 3800 mm Größter Fräskopfschwenkwinkel: Richung +A: 40 Grad Richtung-A: 40 Grad Werkstückspindel: Außendurchmesser: 160 mm Bohrung: 63 mm Gesamtabmessungen der Maschine: Lange: 9130 mm Breite: 3895 mm Höhe: 3200 mm Gewinnt der Maschine: 8400 Kg Vorschübe: Achsen X und Z: 1 bis 10000 mm/min Achse Y: 1 bis 5000 mm/min Eilgänge: Achsen X, Z und Z4: 10000 mm/min Y.Achse: 5000 mm/min X5-Achse: 150 mm/min Drehzahlen: Werkzeug: 300 bis 4000 min^-1 Werkstückspindel: 0 bis 1000 min^-1 Betriebsspannung: 400 V Versorgungspannung: 230 V Cslsqpf Ifsq A H Nyerb Steuerspannung: 24 V Frequenz: 50 Hz Anschlußwert der Maschine: 48 kVA Kabelquerschnitt: 35 mm2 Absicherung: 70A

Condition: good (used), Year of construction: 2004, operating hours: 26,583 h, Functionality: fully functional, machine/vehicle number: A0248, workpiece diameter (max.): 130 mm, Give. CNC gear shaving machine Cjlq A H Nsuyxyzjyerb Make: GLEASON HURTH Type: ZS130 T Year of manufacture: 2004 Machine no.: A0248

Condition: excellent (used), max. wheel diameter 630 mm gear width 180 mm max. module 8 min. module 1 table bore diameter 160 mm no. of strokes 47 - 300 Hub/min Csljwgizkjq A H Nyerb dia. of shaper cutter 125 mm dayligth 100 - 330 mm workpiece diameter 0 - 750 mm stroke length max. 200 mm total power requirement 12 kW weight of the machine ca. 5,8 t dimensions of the machine ca. 2,5 x 2,1 x 3,1 m The design of the LORENZ S8 represents a further development of model S7/500, which was successful over many years. A considerable increase in driving power, reinforced cast iron bodies and gearing units, easy service by push button-control, automatic change of stroke speed as well as circulation system lubrication for all moving parts correspond to the demands of a modern gear cutting machine. The machine is suitable for internal- and external gears. The capacity has been adapted to experience and has been extended to the following maximum values. Raizor block 150 mm, table clamping, tailstock, chip conveyor, change gears, manuals,toolholders, ....

Condition: excellent (used), Year of construction: 1990, CNC gear grinding machine/tooth flank grinding machine Höfler H4000 Year of construction 1990 CNC control is old + defective / must be replaced (needs retrofit) Wheel diameter - max. 4000 mm Wheel width 1560 mm Module - max. 32 Module - min. 3 Machine weight approx. 120 t Space requirement approx. m Year of construction: 1990 Wheel Ø max. 4,000 mm Module 3 - 32 Skew angle max. 35 ° Celjuaxfbeq A H Nysrb Wheel width with straight toothing 1,560 mm Stroke length approx. 1,600 mm Number of strokes 12 - 120 strokes/min. max. workpiece weight approx. 35,000 kg max. number of teeth 12 - 768 Table size Ø x drilling g. 1,900 x 750 mm Grinding wheel Ø approx. 500 mm Accessories / special equipment: Hydrostatic guides in the sanding carriage, table and all other guideways guideways Complete sanding chamber enclosure with sliding doors Automatic sanding process in several cycles as well as settings for Roughing / finishing / fine finishing and automatic dressing cycle dressing cycle according to presettable number of teeth. Profile correction possible through appropriate dressing and additional movement of the grinding slide (vertical and lateral crowning) Coolant device with belt filter and oil mist extraction Separate switch cabinet, separate hydraulic system, separate oil cooling system TPF 40 measuring machine Reutlinger balancing system

Condition: used, Year of construction: 1998, max. wheel diameter 85 mm gear width max. 125 mm max. module 3 Control ja Croljwhqx Tjq A H Nyjb total power requirement 30 kW weight of the machine ca. 8 t

Condition: excellent (used), Year of construction: 1976, Pfauter vertical gear hobbing machine P400 Gear milling machine Crelevwcugjq A H Nyjb Manufacturer: Pfauter Germany Model: P 400 Year of manufacture: 1976 Control type: conventional Wheel diameter - max.: 400 mm Wheel width: 290 mm Module - max.: 6 Module - min.: 0.5 Voltage: 220/380 V Frequency: 50 Hz Dimensions approx.: 2400 x 1650 x 2400 mm Total power requirement: 20kvA The machine is in a well-maintained original condition. The complete, detailed documentation is available. Inspections under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex warehouse here plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as seen Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t Crjlq Aowgizde H Nyeb dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Year of construction: 1988, Condition: used, weight of the machine ca. 5 t working width max. 300 mm 6 extensive accessories viele Wechselräder +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Crslsvrk Ecjq A H Nyob Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2010, max. grinding diameter 400 mm 18010 shaving cutter - diameter 64 - 320 mm indexing schleifbar 1 -12 Modul shaving wheel width max. 40 mm Crelq A H Nsmnug Ueysb number of teeth 13 - 240 roller bend diameter min./max. 73 - 320 mm slide speeds 5-20-30-40 Zähne/min. max. dia. of grinding wheel 762 mm grinding wheel - swivable 5-21 ° grinding slide swivable +/- 2 x 35 ° total power requirement 3 kW weight of the machine ca. 4,2 t