Year of construction: 2009, condition: excellent (used), Falcon / Chevalier QP2033-L Machining Center - Very good condition (hardly used) - Accessories included (tool holder, 3D probe, vices --> see photos) TECHNICAL DATA Work table Size: 1000 x 510 mm T-slots: 5 x 18 mm x 1000 mm Max. load capacity: 500 kg Travel ranges X-axis: 850 mm Y-axis: 520 mm Z-axis: 510 mm Spindle Distance from spindle nose to work table: 150 – 660 mm Spindle nose: BT40 Speed: 80 – 8000 RPM Spindle diameter: 70 mm Feed rate X, Y, Z: 30/30/24 min Accuracy Positioning accuracy: P0.014 (+- 0.004 / 300 mm) Repeatability: PS 0.010 (+- 0.003 mm) Tool changer Number of tools: 24 Max. tool diameter 76 mm / 120 mm Max. tool weight: 7 kg Dimensions and weight Fsdpfxjiqt S Uj Aanjpp Dimensions: 2360 x 2060 x 2583 mm Weight: 5500 kg We assume no liability for the accuracy, completeness, and up-to-dateness of the information provided.

Condition: new, functionality: fully functional, With a capacity from 1 to 25mm with a standard workrest or 25 to 40mm with a special workrest, and a servo controlled regulating wheel, the JHC 12S is the most compact centreless grinder in the range. A precision ground, the hydrostatic bearing assembly provides minimal friction and lateral displacement, along with extended wheel life under heavy grinding loads. The grinding wheel spindle runs on the hydrostatic bearings with an ultra-thin oil film between all touching surfaces. This provides a substantial reduction in wear and prolongs spindle trueness and longevity. The regulating wheel uses a Variable Speed Motor, controls the speed of the regulating wheel. Specification Europa Jainnher JHC 12S Standard work rest diameter 1 - 25mm Optional work rest diameter 25 - 40mm Grinding wheel size : diameter x width x hole 305 x 150 x 120mm Regulating wheel size : diameter x width x hole 205 x 150 x 90mm Grinding wheel speed 1900 rpm Regulating wheel speed 10 - 300 rpm (variable speed) Grinding wheel motor 7.5 hp Regulating wheel motor 2 HP Hydraulic pump motor 1 HP Coolant pump motor 1 / 8 hp Regulating wheel feed on handwheel 4mm (rev) 0.02mm(Gra) Table feed on handwheel 7mm (rev) 0.05mm(Gra) Table micro feed on handwheel 0.2mm(rev) 0.001mm(Gra) Dressing handwheel 1.25mm (rev) 0.01mm (Gra) Regulating wheel tilt angle + 5 Deg -3 Deg Fpjdpjnzhuxsfx Aanep Regulating wheel swivel angle +/- 5 Deg Floor space (approx) 1750 x 1350 x 1400 mm Net weight (approx) 1600 kgs Europa Jainnher JHC 12S Centreless Grinding Machine Standard Equipment Grinding wheel and grinding wheel flange Regulating wheel and regulating wheel flange Flange extractor Diamond tool Thrufeed standard workrest and blade Infeed standard workrest and blade Levelling screw and plate Tool box and tools Thrufeed process gauge Thrufeed safety device Work lamp

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places Fpsdpfx Aju Iddnjansp feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. Fedpfx Aaou Idnmjnopp *

Condition: used, Year of construction: 2012, Hasegawa PM 150 CNC machining center TECHNICAL DATA Spindle Spindle nose: HSK-E32 Speed: 100 - 30`000 rpm Spindle motor: 3.0 / 4.5 kW Tool changer Capacity: 10 Tool - tool change time: 1.8 sec Travel distances X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° OFFER SCOPE U.A: (non-exhaustive list): Fpsdpfx Aaju E El Ijnep Hasegawa PM 150 CNC machining center 10-position tool changer Lehmann EA-507 rotary axis transformer Fire extinguishing system Complete operating documentation Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information provided

Condition: used, Year of construction: 2002, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control 840 D Powerline ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper SK 40 internal coolant system feed 40 bar work table: table surface area 2.600 x 600 mm max. table load 2.200 kg number of T-slots 6 Fpodetqmr Repfx Aanep T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 30 pos. max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm feeds: feed speeds 20.000 mm/min input unit 0,01 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min measuring system Resolution 0,001 mm total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 6,0 x 3,7 x 2,9 m CNC - Machining Center Vertical DECKEL MAHO - DMF 220 linear - from individual part production (aluminium, brass and stainless steel) - incl. workroom wall - M26 function (switching to blown air through spindle center) - new ball screw Z-axis incl. bearing (April 2015) - new milling spindle (2016) - Spindle hours: ca. 11,966 h - WITHOUT vices

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Fpsdpfx Ajtylazeanop Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Lighting Coolant system Enclosed guarding

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Fpjdsufp Svepfx Aanop Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: i Series, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 4-axis DOOSAN DNM 5700 was manufactured in 2022. It features an X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse X/Y/Z: 36 / 36 / 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Power supply: 380 V, 3-phase, 50/60 Hz • Standard-height column • Tool breakage detection • Ball screw nut cooling • Coolant level sensor Additional equipment • 4th axis • Hydraulic system (3A + 1B) • Automatic doors • Robot interface • Chip conveyor • Oil skimmer • Mist collector interface Technical Specification Taper Size BT 40 Fpodoz Rw U Ajpfx Aansp

Condition: good (used), Year of construction: 1999, Manufacturer: MAZAK Year of manufacture: 1999 Type: VTC 20 B Machine number: 141048 Control system: Mazatrol M-Plus (dialog programming with monochrome display) Operating hours: approx. 52,400 h Table: 1,460 x 510 mm Table load: 800 kg Travel distances x-y-z: 1,120 – 510 – 510 mm Distance spindle nose – table: 180 to 690 mm Spindle mount: SK 40 Tool changer: 24 positions Speed: 40 to 7,000 rpm, continuously programmable Spindle power: 11 kW Fodpoz Rztcsfx Aanjpp Feed rate: 1 to 5,000 mm/min, continuously programmable Rapid traverse: 24 m/min Accessories: Renishaw tool measuring system, coolant system, spindle internal cooling, documentation Condition: good Connection: 23 kW Machine dimensions: 3,200 x 2,800 x 3,000 mm Weight: approx. 5.9 t

Condition: good (used), Year of construction: 2011, operating hours: 46,500 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 3,600 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, nominal power (apparent): 130 kVA, controller manufacturer: Siemens, controller model: 840SE, workpiece length (max.): 3,600 mm, workpiece width (max.): 1,100 mm, workpiece diameter (max.): 1,100 mm, workpiece weight (max.): 5,000 kg, total height: 3,042 mm, total length: 9,280 mm, total width: 4,608 mm, table width: 1,100 mm, table length: 4,200 mm, table load: 5,000 kg, rotary table diameter: 1,050 mm, rotational speed (max.): 50 rpm, overall weight: 32,050 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 21,500 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 120, mount diameter: 1,050 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, DMF 360 linear, manufactured in 2011, with Siemens 840D Solutionline control 120-position tool changer Fpsdez Riy Repfx Aanjp HSK 63 tool interface Spindle speed 18,000 rpm Chip conveyor Coolant system, 1000 liters, 80/40 bar Work area enclosure 3D probe, Heidenhain Blum laser Handwheel Air blow through the spindle Coolant nozzle Automatic doors A-axis, Lehman EA 420 Hydraulic clamping system for rotary table Robot interface Oil and emulsion mist separator

Condition: used, Year of construction: 1998, We are offering this used Hermle U 630 S vertical machining center, manufactured in 1998, for sale. Fjdpfez Tkc Ejx Aanopp Unfortunately, due to space constraints, we need to have the machine removed in week 44. The machine can be loaded for transport this week. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2012, Manufacturer: DECKEL MAHO, Type: DMC 1035 V, Year of manufacture: 2012, Serial No. 15425051954, Operating hours: 46,416, Spindle hours: 18,325, Control system, Manufacturer: Heidenhain, Type: iTNC 530, 21" Operator terminal ERGOline touchscreen, Tool magazine for 40 tools, SK 40, Travel range X/Y/Z 1,035 x 560 x 510 mm, 3 machine vices, Manufacturer: Roemheld, Type: HILMA NC 125, Jaw width 125 mm each, Chip conveyor, Chip cart +++ ATTENTION! This machine is part of an online auction! +++ Fedpjz Tlhijfx Aanjpp

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018 Röders RXP 400 CNC, Applications Ideal for high-precision machining applications, including: Micro-machining Electrode manufacturing Fpodpsz Tqwcefx Aanep Small mould manufacturing Precision components High-speed milling applications Documentation The Röders calibration protocol is available to document the calibration work carried out by the manufacturer's engineer.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,000 mm, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis Huron KX 10 vertical machining centre was manufactured in 2013. It is fully functional and currently still in operation. The machine offers an optional FCS clamping system, available for additional purchase. If you are looking to get high-quality machining capabilities, consider the Huron KX 10 machine we have for sale. Contact us for further details. Fsdpfjz S Ibiox Aanepp - Optional Equipment: FCS clamping system (optionally included / available for additional purchase)- Operational Status: Fully functional, currently still in full operationThe image of the machine was generated by AI.

Condition: ready for operation (used), Year of construction: 2013, This 3-axis Huron VX 8 was manufactured in 2013. It is fully functional and currently still in operation. The machine features an optional FCS clamping system, available for additional purchase. If you are looking to get high-quality machining capabilities, consider the Huron VX 8 vertical machining centre we have for sale. Contact us for further details. Fjdpfx Asz S Icgjanspp - Optional Equipment: FCS clamping system (optionally included / available for additional purchase)- Operational Status: Fully functional, currently still in full operationThe image of the machine was generated by AI.

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DECKEL DMU 80 E was manufactured in 1999. It features an X-axis travel of 800 mm, Y-axis travel of 650 mm, and Z-axis travel of 550 mm. The machine includes a table size of 1100 mm x 650 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DECKEL DMU 80 E vertical machining centre we have for sale. Contact us for further details. Fjdpsz Sp Eiefx Aanepp - Operating Hours (Power-On Counter): 41,077 h - Operating Hours (Spindle / Motion Counter): 14,986 h - Control Unit: HEIDENHAIN CNC Control (with 3D control panel and handwheel pendant) - Interface Ports: RS 232 C / RS 422, 230V connection - Optional Equipment: Grid fixture plate mounted on the table, tool magazine, chip tray / coolant reservoir with pump, electronic handwheel pendant

Condition: excellent (used), Control: Fanuc Oi-MF Plus Working area X-axis 510 mm Y-axis 400 mm Z-axis 350 mm Machine table Table size 600 × 400 mm T-slot size 18 × 3 mm Table load 250 kg Fsdpez Sy Tdefx Aanepp Tool magazine Magazine positions 16 positions Tool coding Variable position coding Max. tool length 200 mm Max. tool weight 3 kg Max. tool diameter 68 / 100 mm Spindle Main drive 3.7 / 13 kW Spindle speed 12,000 rpm Spindle taper BT30 Drive type Direct drive Feed rate Rapid traverse X-axis 60 m/min Rapid traverse Y-axis 60 m/min Rapid traverse Z-axis 60 m/min Axis drives Drive system AC servo motors Control Frequency-controlled Feed motor X-axis 1.8 kW Feed motor Y-axis 1.8 kW Feed motor Z-axis 3.0 kW Guidance systems Double V-ball linear guides Rails in all axes General data Width 1,700 mm Depth 2,600 mm Height 2,700 mm Machine weight 2,850 kg Compressed air connection 6 bar Operating fluids Hydraulic oil ISO VG 32 Lubricating oil ISO VG 10

Condition: ready for operation (used), Year of construction: 2004, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,300 mm, total width: 2,900 mm, overall weight: 12,000 kg, product length (max.): 4,100 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 105 V Linear was manufactured in 2004. It features a robust CNC control system, HEIDENHAIN iTNC 530, and has a machine weight of approximately 12,200 kg. The required installation space is 5,700 × 4,700 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 105 V Linear vertical machining centre we have for sale. Contact us for further details. • Required installation space: 5,700 × 4,700 mm • Operating voltage: 400 V • Frequency: 50 Hz • Rated power: 80 kVA • Rated current: 115 A • Compressed air pressure: 6 bar • External coolant supply: 40 l/min at 2.3 bar • Chip flushing capacity: 100 l/min at 2.3 bar Additional equipment Fodpfx Aez S Avusanopp • Chip conveyor (discharge height: 850 mm)

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 HSCI Fpedpfxoz R Icws Aanop Speed : 10000 rpm Movement X/Y/Z : 1050/530/630 mm Tool holder : SK40 General: Tool magazine:24 stations Rapid traverse X/Y/Z:24 m/min Machine weight:7,800 kg Spindle: Technology:Belt spindle Speed:10,000 rpm Tool holder:SK40 Fluid delivery:Blow air through the spindle + cooling lubricant through the spindle (IKZ) Work table: Work surface:1,150 x 560 mm Table load capacity (max.):700 kg Travel ranges X/Y/Z:1,050 x 530 x 630 mm Features/Accessories: Chip Management:Chip Conveyor Cooling Management:IKZ System Setup Mode:Electronic Handwheel Probe:Tool Probe (Hexagon)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: HEIDENHAIN, controller model: TNC-620, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,600 mm, overall weight: 9,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 775 mm, spindle nose: ISO 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Used 3-axis vertical machining center with Heidenhain TNC-620 CNC Fodpfo Afpq Rsx Aanopp

Condition: good (used), Year of construction: 1996, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 6,000 rpm, overall weight: 6,700 kg, number of slots in tool magazine: 18, Manufacturer: Kondia Model: HM1060 Control: Heidenhain 415 Year of manufacture: 1996 Tool changer: 18 positions Fpodpfx Aaj Ad Iahonjp Travel ranges: X Y Z: 1000/600/600 Main spindle: 6,000 rpm Weight: approx. 6,700 kg Sale only to commercial businesses Sold as is, without warranty Ex works Price plus 19% VAT

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 11879, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain TNC430, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, 3-axis Hermle C 800 V vertical machining center Fpsdpfxezmqhcs Aanop Robust construction and precision for complex machining tasks Equipped with a tool changer with 30 positions. The machine has already been disassembled and is available immediately. The machine operated flawlessly until its last day of use.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Fpjdpfsydil Nsx Aanep Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm