Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Klodpsv Iq Ezjfx Al Neu Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,020 mm, feed length Y-axis: 540 mm, feed length Z-axis: 510 mm, nominal power (apparent): 33 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 3,750 mm, total width: 2,285 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 500 Vertical Machining Centre – 2012 Fanuc i-Series Control | 12,000 RPM | BT40 | Spindle Rebuilt 2024 2012 Doosan DNM 500 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle (rebuilt 2024), 1200×540 mm table, 30-tool ATC, 20 bar TSC & data server. Available now. Manufacturer: Doosan Model: DNM 500 Machine Type: 3 Axis Machining Centre Control: Fanuc i Series Control Year: 2012 Condition: Very Good - spindle rebuilt in 2024 We are pleased to offer this 2012 Doosan DNM 500 Vertical Machining Centre, a robust and highly accurate CNC milling machine designed for precision engineering, subcontract machining, and production environments. Equipped with a Fanuc i-Series CNC control and a 12,000 RPM BT40 spindle, this machine delivers excellent cutting performance across a wide range of materials. The spindle was professionally rebuilt in 2024, ensuring reliability, accuracy, and long-term service life. Key Specifications Manufacturer: Doosan Model: DNM 500 Year: 2012 Klodsyfh H Uepfx Al Nou Control: Fanuc i-Series CNC Axis Travels X Axis: 1020 mm Y Axis: 540 mm Z Axis: 510 mm Table Table Size: 1200 × 540 mm Maximum Table Load: 800 kg Spindle Spindle Speed: 12,000 RPM Spindle Taper: BT40 Spindle Motor Power: 15 kW Spindle Condition: Rebuilt in 2024 Toolchanger Automatic Tool Changer: 30 Tool Stations Machine Dimensions & Weight Overall Length: 3750 mm Overall Width: 2284 mm Overall Height: 2703 mm Machine Weight: 6,500 kg Features & Equipment Fanuc i-Series CNC control 30-station Automatic Tool Changer (ATC) 20 bar Through-Spindle Coolant (TSC) Data server / networking capability Fully enclosed, rigid Doosan construction Ideal footprint for busy workshops Please Note No swarf bin included No tool holders included No vices included Ideal Applications Precision CNC milling Subcontract machining Automotive, aerospace & general engineering Small to medium batch production The Doosan DNM 500 is renowned for its rigidity, accuracy, and reliability, making it a proven and popular choice for machine shops seeking dependable CNC performance. Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,316 h, functionality: fully functional, machine/vehicle number: 11080297, travel distance X-axis: 1,100 mm, travel distance Y-axis: 585 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 585 mm Travel range, Z-axis: 600 mm Spindle speed (max.): 8,000 rpm Spindle type: SK 40 Kljdpfx Alszd Aigo Nou Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Input voltage: 400 V Total weight: 7,000 kg Operating hours (according to image) Control system operating hours: 42,480 h Machine operating hours: 38,123 h Spindle operating hours: 12,316 h EQUIPMENT Documentation/Manual Chip conveyor Electronic handwheel

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 35 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNS 530, total height: 2,900 mm, total length: 7,000 mm, total width: 2,700 mm, table width: 620 mm, table length: 1,550 mm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,510 h, distance table to spindle center: 900 mm, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 63 A, Equipment: chip conveyor, documentation/manual, KUNZMANN BA 1350 CNC Vertical Machining Center - Spindle bearing diameter, front: 70 mm, rear: 60 mm - Distance between spindle and table: min. 90 mm / max. 900 mm - Distance between spindle center and machine frame: 655 mm - Max. tool diameter with occupied positions: 80 mm, with free adjacent position: 125 mm - Table with 6 grooves - Includes dividing head (4th and 5th axis - manufacturer WALTER, type: TANIH 200) - With LANG 5-axis clamping system - Also includes RENISHAW measuring probe, a chip conveyor, and various documents - Note: without the machine vise located on the clamping surface! Note: The item must be collected between July 27th and July 30th, 2026, on a date to be agreed upon. Klsdpozdp Ehsfx Al Nou FCA D-71364 Winnenden - loaded onto a truck.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 11734, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,200 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 528 mm, table length: 900 mm, overall weight: 5,000 kg, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 23 A, Equipment: documentation/manual, HERMLE UWF 902 H CNC Vertical Machining Center - Connection: 16 kVA - Tool holder: SK 40 - Incl. 30-position tool changer - Incl. documentation and a RENISHAW measuring probe Klodpjzdpz Asfx Al Nou Note: The item must be collected between July 27th and July 30th, 2026, on a date to be determined. FCA D-71364 Winnenden – loaded onto a truck.

Condition: good (used), Year of construction: 1995, operating hours: 28,099 h, functionality: fully functional, machine/vehicle number: 662280, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: DECKEL MAHO, controller model: CNC 425, total height: 2,000 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 480 mm, table length: 900 mm, overall weight: 2,000 kg, number of slots in tool magazine: 16, mount diameter: 40 mm, input voltage: 400 V, power: 20 kW (27.19 HP), input frequency: 50 Hz, input current: 50 A, DECKEL MAHO MH 600 W CNC Vertical Machining Center - Tool holder: SK 40 - Table with 7 T-slots - Incl. rotary table from WALTER, type: TANIP125NEG, year of manufacture: 2010 Kledpfxjy I Tgys Al Nju Attention: The item must be collected between August 24 and August 27, 2026, on a date to be agreed upon. FCA D-61352 Bad Homburg - loaded onto a truck.

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 25 kVA, torque: 135 Nm, controller manufacturer: Siemens, controller model: 828D, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 2,600 mm, total width: 2,310 mm, table width: 1,000 mm, table length: 550 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10 h, coolant supply: 30 bar, spindle motor power: 19,000 W, spindle nose: HSK63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical Machining Center VM800 - Demonstration Machine - Technical specifications: Control unit: Siemens 828D Milling spindle 12,000 rpm, HSK63 Internal coolant supply (IKZ) 30 bar Bed flushing Renishaw OMP60 touch probe (Heidenhain available on request) Renishaw TS27R tool measurement (Heidenhain or BLUM available on request) Direct measuring systems in X, Y, Z axes by Heidenhain Rotating inspection window SPINVISTA (Black Edition) Automatic door Robot interface Automatic power-off function Automatic tool changer (30 positions, HSK63) Centralized automatic lubrication system Telescopic way covers Electronic handwheel for manual operation Signal lamp Machine operating manual Pneumatic air gun Klsdpfxeyr A T Aj Al Nou Water gun Air blow gun Chip conveyor Coolant tank 286L This and other machines from GEWA Werkzeugmaschinen GmbH are available for viewing at our facility in the Eifel region.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 750 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 530 mm, controller manufacturer: FANUC, controller model: Oi MF5, total height: 2,850 mm, total width: 2,600 mm, table width: 420 mm, table length: 750 mm, table load: 400 kg, overall weight: 5,000 kg, spindle speed (max.): 11,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 2,400 mm, number of axes: 4, This 4-axis Z-YANG V7L was manufactured in 2021. It features an X-axis travel of 750 mm, Y-axis travel of 430 mm, and Z-axis travel of 530 mm. The machine is equipped with a FANUC Oi MF5 control system, a powerful 11 kW spindle motor, and an automatic tool changer with 24 tools. If you are looking to get high-quality metalworking capabilities, consider the Z-YANG V7L vertical machining centre we have for sale. Contact us for further details. • Automatic Tool Changer: 24 tools • Rapid Traverse: 48 m/min Kodpfjyrfcgjx Al Nslu • Feed Rate: up to 15 m/min Additional equipment • Chip conveyor (included) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,327 h, travel distance X-axis: 762 mm, controller manufacturer: HAAS, controller model: Classic Haas Control, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-2SS was manufactured in 2014. It features advanced capabilities including tool measuring and a probe for enhanced precision. With a feed cutting time of 5327 hours, this vertical machining centre is designed for efficient operations. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS machine we have for sale. Contact us for further details. • IKZ • Probe Kledoyux Saopfx Al Nou • Tool measuring • Axis configuration: 3 axes (X/Y/Z) • Frequency: 50 / 60 Hz • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Arc flash rating: • 208-240 VAC models: HRC-1 • 360-480 VAC models: HRC-2 • Feed cutting time: 5327 h Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640 (19" Touch-Screen display), table width: 650 mm, table length: 1,600 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 30, tool weight: 7,000 g, number of axes: 3, This 3-axis HARTFORD LG 1570 TNC 640 was manufactured in 2023. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 700 mm, and Z-axis travel of 650 mm. The machine includes a robust clamping table with dimensions of 1,600 x 650 mm and a maximum table load capacity of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HARTFORD LG 1570 TNC 640 vertical machining centre. Contact us for further details. - T-Slots configuration: 5 slots, 125 mm distance, 18 mm size- Guideway System: Upgraded Linear Roller Guideways on X, Y, and Z axes (instead of standard ball guides)- Feed Drives: Digital servo motors with ball screws on all axes- Main Spindle Taper: SK40- Main Spindle Drive: Pulley/Belt driven AC motor- Max. Spindle Torque (M max): 89 Nm- Spindle Temperature Control: Closed cooling circuit with separate spindle cooling unit- Tool Changer Type: Automatic Tool Changer (ATC) with rapid-change double arm- Tool Magazine Capacity: 30 positions (ATC30)- Max. Tool Diameter: Ø75 mm (Ø150 mm if adjacent positions are empty)- Max. Tool Length: 300 mm- Workpiece Probe: 3D Touch Probe (installed for automatic zero-point and position measurement)- Tool Probe: Tool Touch Probe System (installed on table for length, diameter, and tool breakage detection)- Internal Coolant Supply (IKZ): High-pressure pump system, max. 20 bar with cartridge filter- External Coolant Supply (AKZ): Multi-nozzle system on spindle nose- Air Supply: Spindle nose compressed air cooling nozzle & central air through the spindle (programmable via M-functions)- Chip Management: Enclosed workspace with sloped bed, chip flushing system, and longitudinal hinged belt chip conveyor (discharge height approx. 1,200 mm, discharge side: Left)- Enclosure features: Front electronically monitored sliding door, side swing doors with windows for long workpieces- Lubrication: Fully automatic central lubrication system with level control and CNC warnings- Workspace Lighting: 2x LED lights- Additional Equipment: Control cabinet air conditioning unit, electronic handheld handwheel, compressed air gun with coiled hose, hand-operated coolant flushing gun- Color Scheme: Black (base frame, column, vertical slide, coolant tank, cabinet, doors, conveyor) & White (enclosure housing) Kledpfx Aszccgqel Nou

Condition: ready for operation (used), Year of construction: 2009, operating hours: 35,295 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,200 mm, total width: 5,400 mm, table width: 900 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 60, product length (max.): 3,400 mm, swivel angle B-axis (min.): -29 °, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 80P duoBLOCK was manufactured in 2009. It features impressive axis travels with X-axis at 800 mm, Y-axis at 1050 mm, and Z-axis at 850 mm. The machine includes a robust table size of Ø 900 × 700 mm and a maximum workpiece weight capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 80P duoBLOCK vertical machining centre we have for sale. Contact us for further details. • Rotary axes: B-axis (tilting head) -30° to +180°; C-axis (rotary table) 360° continuous • Table size: approx. Ø 900 × 700 mm • Max. workpiece weight: approx. 1400–1800 kg • Spindle type: Vertical milling spindle • Coolant through spindle (CTS): yes • CE compliant • P-B0052 – 3D control Heidenhain iTNC 530 Kledpfx Aloyvhfme Nou • P-W0276 – Universal milling head with controlled B-axis • P-D0010 – Tool magazine Horizontal chain magazine with 60 positions • P-K0220 – Infrared measuring probe Renishaw OMP 60 (optical) • 3D quickSET – Tool set for checking and correcting kinematic accuracy • P-K0205 – 4-color signal light • P-G0004 – Wash gun with pump 2 bar / 40 l/min (theoretical pump capacity) • P-L0036 – Power failure safety package • Condition: Very good working condition; full service history available Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2005, Hedelius C60-2500 CNC machining center - Spindle running time: 9,546 h Manufacturer: Hedelius Type: C60-2500 Year of manufacture: 2005 Control system: Heidenhain Location: Bremen Technical data: Travel in X-axis: 2,500 mm Travel in Y-axis: 620 mm Travel in Z-axis: 500 mm Table clamping area: 3,000 x 600 mm Spindle speed: 8,000 rpm Rapid traverse / Feed rate: up to 30,000 mm/min Machine weight: approx. 12,000 kg Operating hours: Control system ON: 40,045 h Machine ON: 44,393 h Program running time: 10,019 h Spindle running time: 9,546 h Equipment: Heidenhain CNC control system 4th axis: See photos (this was installed on this machine about 10 years ago and then stored. None of the current operators know how or if the device works.) Full enclosure Electronic handwheel Coolant system Work area lighting Chip tray The machine is in operation and can be inspected while powered on by appointment. With an X-axis travel of 2,500 mm and a table clamping area of 3,000 x 600 mm, the machine is particularly suitable for machining long workpieces in mechanical engineering, toolmaking, jig and fixture construction, and steel construction. Kodpfx Aljzc Rlho Nolu The relatively low spindle running hours of only 9,546 hours are particularly noteworthy. The Hedelius C60 stands for robust German engineering quality, high precision, and a long-lasting design. Inspection is possible at any time in Bremen by appointment. _____ Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial businesses and without warranty.

Condition: used, Year of construction: 2013, HEDELIUS C50 C50/40/530/1800/8 Machining Center ==> Spindle operating hours: 8,997 h Manufacturer: HEDELIUS Model: C50 Year of manufacture: 2013 Control system: Heidenhain Machine weight: approx. 5,500 kg Technical data Travel in X: 1,800 mm Travel in Y: 510 mm Travel in Z: 480 mm Table size: approx. 2100 x 510 mm Feed rate: up to 30,000 RPM Spindle speed: up to 8,000 mm/min Spindle operating hours: 8,997 h Program running time: 10,446 h Equipment Heidenhain CNC control system Fully enclosed machining center Central lubrication system Coolant system Electronic handwheel Tool magazine Documentation available Description Kedpfezc Rctox Al Nslu The machine is in very good condition and can be inspected while powered on, by arrangement. With an X-axis of 1800 mm, the machine is ideally suited for machining long workpieces in tool, machine, and fixture construction. The relatively low spindle operating hours of only 8,997 hours are particularly noteworthy. The machine features a Heidenhain control system and achieves spindle speeds of up to 8,000 RPM. The HEDELIUS C50 stands for high precision, stability, and reliability “Made in Germany” and is ideally suited for both single-part and series production. Inspection: Possible by appointment in Bremen. _____ Our general terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and approved for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to businesses and without warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, total height: 2,700 mm, total length: 2,800 mm, total width: 3,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with extensive standard equipment: - FANUC or Heidenhain control - internal coolant supply - SK 40 - 24-position tool magazine, double-arm gripper - Glass scales in all axes - Chip conveyor - Electronic handwheel - Compressed air through the spindle - 30-position tool holder package - Complete 24-position tool equipment - Initial filling of coolant lubricant - Installation-commissioning-training - Guarantee up to 5 years possible HAITIAN European branch Ebermannsdorf Kjdpfxevtz Dxs Al Nolu

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Fanuc, controller model: 0i, workpiece weight (max.): 3,000 kg, table width: 850 mm, table length: 1,500 mm, table load: 3,000 kg, spindle speed (max.): 600 rpm, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Double-column machining center SK50 tool holder Torque 630 Nm He Ul Tjv I Ucdjh U Sek Table load 3000 kg 6000 rpm Internal coolant supply Distance between columns 1670 mm Spindle nose to table surface 150-850 mm Kedpfxjv I Ucde Al Njlu 45 kW 3 or 4-year warranty

Condition: new, Year of construction: 2025, Machine Specification: Travel distances: - X axis travel: 850 mm - Y axis travel: 500 mm - Z axis travel: 500 mm - Spindle nose to table: 150–650 mm Table: - Table size: 1000 x 500 mm - Max. load: 600 kg - T-slots on table: 3 x 18 x 125 mm Spindle: - Drive type: Built-in - Max. speed: 15,000 rpm - Power: 11/18.5 kW - Torque: 45/60 Nm - Tool holder: BBT 40 - Pull stud: MAS403-P-40T-I (45°) Feed rates: - Rapid traverse (X/Y/Z): 30/30/30 m/min - Cutting feed (X/Y/Z): 10/10/10 m/min - Ball screw diameter (X/Y/Z): 40 mm Tool magazine: - Capacity: 24 tool positions - Type: BBT 40 - Max. tool diameter (with adjacent pockets full/empty): Ø80/Ø150 mm - Max. tool length: 300 mm - Max. tool weight: 8 kg - Tool-to-tool indexing: 2.5 sec Precision: - Positioning accuracy (X/Y/Z): 0.006/0.005/0.005 mm - Repeatability (X/Y/Z): 0.004/0.003/0.003 mm Other features: - Machine weight: 6 t - Dimensions (LxWxH): 2640 x 2870 x 2760 mm Standard configuration: - Mitsubishi M80VB CNC - 15,000 rpm built-in spindle - Spindle cooling - Workpiece air cooling - Machine bed flushing - External coolant tank - Full enclosure - Air gun - 3-color signal lamp - Standard accessories - Documentation - CE Options: - FANUC PLUS 3A - Mechanical spindle 12,000 rpm (BBT40) - Kessler spindle 20,000 rpm (HSK-63) - Control panel air conditioning - Spindle ring cooling - Through-spindle coolant 20 bar - Oil separator - CNC 4th axis - Oil mist separator - Glass scales - Automatic door - 24/30-tool magazine Machine is equipped with: - Spindle ring spray cooling - Heidenhain linear scales on three axes - Through-spindle coolant 20 bar - Chain-type chip conveyor with chip cart - Workpiece rinse water gun (automatic switching) - FANUC PLUS 3A+ 15-inch monitor (CE configuration) - 30-tool servo magazine - Oil-water separation device - HSK-A63 interface for electric spindle tool holder - ROTOCLEAR - HPC500II lifting tool - Software interfaces for BLUM tool measurement and workpiece probing system (TC60) - MOV850 lifting tool - 2-year full machine warranty Klodpow Rcxvjfx Al Nsu - Pre-rinse water system inside the machine - Control cabinet air conditioning

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: 31i-A5, total height: 2,336 mm, total width: 1,565 mm, table width: 400 mm, table length: 650 mm, table load: 300 kg, overall weight: 2,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 5,500 W, number of slots in tool magazine: 21, tool weight: 2,000 g, product length (max.): 2,027 mm, number of axes: 3, This 3-axis FANUC ROBODRILL Alpha-T21iFL was manufactured in 2008. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine has a rapid traverse rate of 54,000 mm/min and a spindle speed of 10,000 RPM. If you are looking to get high-quality drilling, tapping, and milling capabilities, consider the FANUC ROBODRILL Alpha-T21iFL vertical machining centre we have for sale. Contact us for further details. • Control Model: FANUC 31i-A5 • Table T-Slots: 3 • T-Slot Size: 14 mm • T-Slot Pitch: 125 mm • Distance Table to Spindle Nose: 250 – 580 mm • Rapid Traverse Rate: 54,000 mm/min • Feed Rate: 1 – 30,000 mm/min • Acceleration: 1.5 G • Continuous Spindle Power: 3.7 kW • Spindle Taper: BBT30 Big Plus • Tool Holder: BT30 • Tool Magazine Capacity: 21 • Maximum Tool Length: 250 mm Kjdozb Iq Sjpfx Al Nelu • Tool Change Time: 1.6 sec • Positioning Accuracy: 0.006 mm / 300 mm • Repeatability: ±0.002 mm • Memory Capacity: 512 KB • Display Size: 10.4 in • Signal Lamp • Coolant Tank Capacity: 200 L • Power Supply: 400 V / 50 Hz • Air Pressure Requirement: 0.35 – 0.5 MPa • Power-On Hours: 24,133 h • Run Time: 10,294 h • Application: High-Speed Drilling, Tapping and Milling of Precision Components

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,493 h, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, spindle motor power: 13,000 W, spindle speed (max.): 12,000 rpm, total height: 2,507 mm, total width: 1,620 mm, overall weight: 5,200 kg, controller manufacturer: FANUC, controller model: i Series, product length (max.): 3,230 mm, table load: 200 kg, tool weight: 2,800 g, number of axes: 3, This 3-axis DOOSAN T 3600 D was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 350 mm. The machine includes a table size of 2x 650 x 375 mm with a loading capacity of 2x 200 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN T 3600 D machine we have for sale. Contact us for further details. - Controlled Axes: 3 (X, Y, Z)- Distance from Spindle Nose to Table Top: 150-500 mm- Table Size: 2x 650 x 375 mm (Pallet changer system)- Table Loading Capacity: 2x 200 kg- Table Surface Type: T-Slot- Spindle Taper: ISO #30 (BT30)- Spindle Power: 13 kW (15 min) / 3.7 kW (Continuous)- Max. Spindle Torque: 82.7 N-m- Rapid Traverse Rate (X / Y / Z): 48 / 48 / 56 m/min- Tool Storage Capacity: 21 stations (Upgraded from standard 14)- Max. Tool Diameter (With / Without Adjacent Tools): 80 mm / 150 mm- Max. Tool Length: 200 mm- Tool Change Time (Tool-to-Tool / Chip-to-Chip): 1.45 sec / 2.22 sec- Main Power Supply: AC 380V, 3-Phase, 50/60Hz- Rated Power Capacity: 19.01 kVA- Full Load Current: 32.05 A- Compressed Air Supply: 0.54 MPa- Coolant Tank Capacity: 200 L (Base) / 270 L- Control System Power-On Time: 15,979 Hours- Machine Operating Time: 14,317 Hours- Actual Machining Time: 4,493 Hours- Total Completed Workpieces: 2,460,030 ea- Internal High-Pressure Cooling: 20 bar- Coolant Pump Delivery Pressure: 4.5 bar (1.1 kW, 30 l/min KSS Pump)- Additional Equipment: Enclosed top machine cover (Top-cover), Oil skimmer, Pneumatic clamping preparation (1 pair per pallet), Automatic workspace door with safety edge, 3-color status signal tower, Workspace lighting, Rigid tapping function, Workpiece coordinate system addition (G54.1 P1-48) Technical Specification Driven Tools No Ksdpfjzb Ii Ujx Al Nolu

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Klodpfxox Icyvj Al Nju Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Ksdpfxet Hw Trj Al Nslu Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 500 mm z-travel 510 mm Kledpjt Hwyrefx Al Nju total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. m

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW Kodjt Hwtfspfx Al Nolu weight of the machine ca. 10 t dimensions of the machine ca. m

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 380 mm Klsdpfst Hw H Esx Al Neu z-travel 300 mm Control FANUC total power requirement 12 kW weight of the machine ca. 2300 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1990, x-travel 500 mm y-travel 300 mm z-travel 350 mm total power requirement 12 kW Ksdpfjt Hwy Esx Al Njlu weight of the machine ca. 3800 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1997, x-travel 800 mm y-travel 400 mm z-travel 350 mm total power requirement 40 kW Klsdpfxjt Hwx Is Al Neu weight of the machine ca. 8 t dimensions of the machine ca. m