Condition: used, Year of construction: 2005, x-travel 5.000 mm y-travel 3.100 mm z-travel 1.200 mm Control HEIDENHAIN TCN 530 HSCI table surface area 5.000 x 2.000 mm T-slots 11 T - slots - width 22 mm table weight 30.000 Kg rapid traverse X-axis 20.000 mm/min rapid motion - y-axis 30.000 mm/min number of spindle speeds 6.000 U/min/rpm Spindle power 32 kW taper ISO Kegel ISO 50 distance between columns 2.800 mm Internal cooling system 20 bar weight of the machine ca. 65 t dimensions of the machine ca. 15.100x6.200x6.250 mm Head UAD II positioning 0.1º / 0. 1º Speed ranges 2 Tool clamping Hydraulic Head 2 – Vertical mandril ATC positions 30 2 longitudinal chip conveyors 1 cross chip conveyor Fjb Etzgevzhbyoqogb Portable handwheel Laser tool presetter

Condition: refurbished (used), Year of construction: 2000, operating hours: 27,825 h, Functionality: fully functional, machine/vehicle number: 1093 0001613, Equipment: documentation/manual, used DMU 80 TNC 430. According to photos Fjb Etzet Skhysgqegb Without tools or vice complete operating instructions Reviewed annually. Bought used. 1-shift operation Always avaliable

Condition: used, Year of construction: 1979, table longitudinal travel / mm cross travel / mm vertical movement / mm incl. vice Table dimensions: 1300x400mm Fgsbeuddp Ho Etzgqsb The machine is sold without accessories.

Condition: excellent (used), Year of construction: 1979, machine/vehicle number: 2202-10706, Deckel FP2 Aktif toolroom milling machine in very good TOP condition. Machine Nr.2202-10706 Specifications: - Machine speed: 25 - 2500 rpm - Power feed X/Y/Z infinitely variable 5/500mm/min - Rapid feed X/Y/Z 1500mm/min - X / Y / Z: 400/200/400 mm - Spindle brake - Spindle nose vertical and hor. SK40/M16 - Weight about 1300 Kg Accessories and equipment: - 3-axis Aktif digital Heidenhain TNC113 - coolant system - Central lubrication - machine books Fjb Etzgovwczteqegb Offered is a universal milling machine Deckel FP2 Aktif, in very good TOP condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs very quietly. All guideways are in very good condition. In this newer FP2 model the powerfeed in three axes is infinitely adjustable, the machine has also rapid traverse in three axes. The machine is mechanical and electrical complete tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: excellent (used), Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, position of the milling head: Testa automatica universale 2,5 - 2,5 gradi, spindle speed (max.): 5,000 rpm, spindle speed (min.): 30 rpm, table width: 1,500 mm, table length: 3,500 mm, table height: 300 mm, spindle motor power: 42,000 W, FANUC series 31 numerical control X-axis travel mm 3000 Y-axis travel mm 1250 Z-axis travel mm 2000 Rapid feeds X,Y,Z mm/min 30,000 Spindle speed rpm 30-5000 Spindle power S1/S6 kW 26/42 Fjb Etzgov Un Sljqsgb Spindle connection ISO 50 COMPLETE WITH: - 24-position tool changer - Automatic universal head 2.5 - 2.5 degrees - Provision for internal spindle water - JECOM stolle table mm 3500x1500x H300 - Chain chip conveyor USED MACHINE

Condition: good (used), Stock number: 2912 Manufacturer: Deckel Machine number: 33414 Type / model: FP 1 Travel paths x-y-z: 300 - 150 - 340 mm Table: 600 x 200 mm Speed range: 40 to 2,000 rpm Spindle mount: SK 40 Feeds: 16 to 500 mm/min Fgob Etzeu Eb I Esgqob Connection: 1 / 1.5 kW Accessories/equipment: Heidenhain digital display, machine vice Condition: good, feeds do not engage! Selling price in actual condition Weight: 0.8 t Dimensions: 800 x 1,000 x 1,800 mm

Condition: ready for operation (used), Brand: CORREA Model CF-17 Type : FIXED BED Febsv D Rqpe Etzgqjgb Table size : 2000 x 700 mm Number of T-slots: 5 x 22 Distance between T-Slots: 125 mm X axis Travel : 2000 mm Y axis travel : 800 mm Z axis travel : 800 mm Rapid traverse: 12.000 mm Spindle nose: ISO 50 Diameter of front bearing : 85 mm Turning ranges : 20-3000 rpm Range : 5-5000 Spindle power : 17 kw Max. Weight carrying on table : 3.500 kg Machine weight: 9.000 kg

Condition: used, Wanderer 2DU900 Mechanical milling machine for iron, with accessories Fjbewa A Abj Etzgqegb

Condition: good (used), . Clamping shank , D = 16 mm . Measuring range up to : D approx. 125 mm . Key insert straight , with ball , D = 5 mm Key insert curved , with ball , D = 5 mm . Fgjb Ejvzbwbstzgqsb Button insert straight , with ball , D = 1.6 mm .

Condition: used, Year of construction: 1983, Functionality: fully functional, Control: Heidenhain TNC 145 (operating manual included) Travel (X/Y/Z): 600 / 600 / 500 Fgsb Etzgov R T Tgsqob

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 201112149n, Very nice milling machine, hardly used. automatic feed x and y axis height electrically adjustable head can be moved forwards/backwards + adjustable under degrees digital readout Fgsb Etzjvvg R Aogqeb cooling for sale because it is no longer used can be seen working

Condition: good (used), Table clamping surface: 1,000 x 400 mm Travel paths: 800 – 300 – 400 mm Speed range: 50 to 2,500 rpm Feed: 5 to 500 mm/min Rapid traverse: 1,500 mm/min Holder: SK40 Condition: good, ready for use Accessories: Heidenhain digital display, various holders See pictures Connection: 3 kW Weight: 2.5 t Dimensions: 2,000 x 1,900 x 1,900 mm Feb Etzgovmnlcsqegb

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Travel x/y/z : 300/350/220 mm SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Fgebjir U H Ee Etzgqob For further information or contact options, please visit our website

Condition: used, CME FCM-5000 5500mm x 950mm CNC Bed Mill Serial No.2317 Year of Manufacture 1994 Fjbjwaliwe Etzgqogb Control Heidenhain TNC415 Table Size 5500mm x 950mm Longitudinal Travel X Axis – 5000mm Cross Travel Z Axis – 2000mm Vertical Travel Y Axis – 1200mm Longitudinal Travel & Vertical Feeds 10,000 mm per minute Spindle Taper ISO 50 Input 380 Volts 50 Cycles Spindle Motor 22 Kw Spindle Speeds 50 – 3000 rpm Feed Rate 4000mm per minute Fitted with16 Automatic Tool Changer Swarf Conveyor Nett weight approx. 32,000 Kgs

Year of construction: 1988, Condition: good (used), CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Various tool holders, Complete machine documentation. Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Fgeb Etzgebu Em Asqjb Machine can be run under current.

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel Fgjbevt D D Uj Etzgqob - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: used, Year of construction: 1992, x-travel 230 mm y-travel 90 mm z-travel 110 mm turning speeds 12000 U/min total power requirement 0,74 kW weight of the machine ca. 120 kg dimensions of the machine ca. 600 x 550 x 1300 mm *While stocks last* Fgsb Etzsvh Sihegqeb 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm

Condition: ready for operation (used), Year of construction: 1978, operating hours: 7,000 h, Functionality: fully functional, machine/vehicle number: 3245010/57, feed length X-axis: 1,100 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 800 m/min, feed rate Y-axis: 800 m/min, feed rate Z-axis: 400 m/min, spindle speed (max.): 1,400 rpm, spindle speed (min.): 28 rpm, quill stroke: 110 mm, quill travel distance: 1,100 mm, quill diameter: 180 mm, rapid traverse X-axis: 800 m/min, rapid traverse Y-axis: 800 m/min, rapid traverse Z-axis: 400 m/min, total height: 2,500 mm, total width: 2,000 mm, total length: 2,500 mm, table width: 400 mm, table length: 1,600 mm, table height: 950 mm, position of the milling head: vertikal, type of input current: three-phase, rotational speed (max.): 1,400 rpm, rotational speed (min.): 28 rpm, table load: 500 kg, overall weight: 4,100 kg, working range: 1,100 mm, input voltage: 380 V, milling spindle length: 110 mm, control cabinet height: 2,000 mm, control cabinet length: 800 mm, control cabinet width: 450 mm, workpiece weight (max.): 500 kg, distance table to spindle center: 450 mm, space requirement width: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 2,000 mm, input current: 32 A, input frequency: 50 Hz, throat depth: 1,000 mm, Equipment: documentation/manual, Spindle mount SK 50, machine is ready for use and under power, has been used occasionally in recent years and is now to be sorted out due to space constraints. Fgjb Etjv Rxhpezgqob

Condition: good (used), Year of construction: 1992, Travel : X-axis (longitudinal movement) 880 mm Y-axis (transverse movement) 300 mm Fobotvfwcs Etzgqegb Z-axis (vertical movement) 385 mm Clamping table : Clamping surface 315 x 1250 mm Table load 1000 kg Spindle head : Tool holder 50 SK Speed 28 - 1400 rpm Drive power 5.5 kW Feed : X-, Y-axis 16 - 800 mm/min Z-axis 5 - 250 mm/min Rapid traverse : X-Y-axis 3150 mm/min Z-axis 1000 mm/min connected load : 8 kW Weight : 4.0 t Space requirement : L x W x H 2.3 x 2.0 x 2.6 m Accessories : * various tool holders * Operating instructions

Condition: ready for operation (used), Optimum milling machine Fgob Eev H Nnxstzgqob

Year of construction: 1993, Condition: good (used), CNC universal milling machine DMG MORI Type: MH 600 C Control MAHO 532 year 1993. with automatic swivel milling head G17/G18 and B -axis rotary table. Without tool changer. Further data see data sheet. Fgjb Etzgoiihxhjqob Complete machine documentation and data backup available. Good general condition.

Condition: excellent (used), Functionality: fully functional, From Swabia for model makers and professional hobbyists a beautiful machine with reasonable travel paths and with swivel and tilting table, 400 V, connected load 2.2 kW Travel paths: in X 280 mm in Y 170 mm in Z 250 mm ISO 30 mount. Fjbsvyk H No Etzgqegb Table surface 680 x 180 mm Dimensions, W x D x H: 1 x 0.8 x 1.5 m Weight approx. 0.7 ton . Equipment: • Universal swivel and tilting table • 2 speed ranges, continuously adjustable, 150 - 2000 rpm • Feed in X-axis continuously adjustable, 15 - 250 mm/min • Coolant system • Right and left rotation

Condition: used, Functionality: fully functional, travel distance X-axis: 320 mm, travel distance Z-axis: 1,275 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, input current: 44 A, Equipment: documentation/manual, Max. rotating diameter on the bed 700 mm Spindle hole diameter 93 mm Spindle nose length - tailstock 1,400 mm ASA 8 spindle n.2 speed ranges 2,500 rpm Spindle power 22 kw X-axis useful stroke 320 mm Z-axis useful stroke 1,275 mm 12-position tool turret CNC Philips 432 Complete with SMW AUTOBLOCK 400" self-centering Bezel and tailstock original machine manuals PLC and CNC manuals Fgjbov S Hk Uo Etzgqeb

Condition: repair required (used), Functionality: limited functionality, Donau Sys machine: - Table dimensions: 3000 x 700 mm - Travel: X 2900 Y 700 Z 700 - Magazine for 7 tools - Spindle cone SK40 - belt transmission - Spindle speed 3000 rpm Fgob Etewayryozgqob - Chip conveyor - Cooling around the spindle and through the spindle - Mitsubishi Electric MMIV 7.5.11 control - German language. Currently the machine is for a major overhaul. It worked until 2024. Dismantled from the production line - functional. Stored under a roof. It has not been used for a year. The last photo shows the machine in July 2024 at the time of dismantling from the production line.

Year of construction: 2007, Condition: excellent (used), ANAYAK HVM 3800 traveling column milling machine with table Year of construction: 2007, very well-kept. CNC control HEIDENHAIN iTNC 530 Technical data: X axis (lengthways) 3,200 mm Fgob Eohlqiuetzgqeb Y axis 1500 mm Z axis 1800 mm Table load: 25t Spindle mount ISO 50 DIN 69871 Spindle speeds 4,000 rpm milling head index 2.5 ° B + C axis each Drive power: 30KW, 2-stage gearbox coolant supply