Condition: used, Year of construction: 2003, Double-sided tenoning machine with automatic feeder Technical Features - Production: Up to 2400 pcs per hour - Produccition: very high outputs (2400 tenons / hour) - Speed of the axles portafresas: rpm 9000 - Max. length of the pins at any inclination: mm 100 + 2R - Max. shank depth with standard tool: mm 40 - Min. Shank depth with standard tool: mm 10 - Maximum spike thickener: mm 25 Cedpfxsxrc Hzs Aa Nsgp - Power axle carrier motors (nr. 2 of 4HP): HP 8 - Motors for rotation (N. 2): HP 2 - Motor power right group movement: HP 1

Condition: good (used), Year of construction: 1995, machine/vehicle number: 288.I.8, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Csdpfx Aaevvvr As Negp Mechanics designed for high operational reliability with the highest production output. USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine. Spindle diameter: 25 mm Spindle length: 70 mm Connection diameter: 2 x 100 mm Central lubrication Automatic or manual operation Automatic material loading and discharge Min./max. element length: 199.5 mm / 2030 mm (dimension A) Element thickness: 100 mm Width: 90 mm Unit adjustment range (B and F): + 92° / - 27° Unit angle adjustment (D and H): + 45° / - 20° Unit angle adjustment (E and M): + 45° / - 10° Spindle height adjustment (C and G): + 62° / - 5° Joint height and width adjustment Spindle angle adjustment: 0° - 90° (vertical journal) Cycle speed adjustment

Condition: repair required (used), Year of construction: 1991, Tilting spindle moulder Manufacturer: Panhans Model: 240 Cgedpfxex Tgtwo Aa Nsp Year of construction: 1991 The electrical detection of the actual angle value does not function. Table: 260 x 80 cm Power: 11 kW Swivel range: -5° to +45° Angle adjustment: Electric Height adjustment: Electric Speeds: 3/4.5/6/9,000 rpm Left/right rotation: Yes Motor brake: Yes Weight: approx. 780 kg Incl. power feed unit

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Fixed shaft Extended tables both left and right Aigner integral fence Maggi Steff 2034 Power feed unit Codpew Rftijfx Aa Negp

Condition: good (used), Wood router bit inserts, knife inserts, form cutter inserts Cgodpfxob A St Tj Aa Nsp -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm Price: complete -Weight: 2.3 kg

Condition: good (used), Wood router bit inserts, knife inserts, form cutter inserts -Blade width: 60 mm -Blade thickness: 2 mm -10x: left -10x: right Cgsdpfx Aaob A Sufe Nsp Price: complete -Weight: 0.8 kg

Condition: good (used), Wood router bit inserts, knife inserts, form cutter inserts -Blade width: 60 mm -Blade thickness: 2 mm -12x: left -11x: right Cgedpfxjb A Suds Aa Nep Price: complete -Weight: 0.9 kg

Condition: good (used), Wood router bit inserts, knife inserts, form cutter inserts Cgsdpfxjb A St Uj Aa Njp -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm Price: complete -Weight: 2.3 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK SH-30S PRECISA spindle moulder (shaper), available in 400V or 230V versions, is a high-performance and precise woodworking machine designed for professional wood processing in industrial plants, carpentry workshops, and craft studios. Thanks to its stable construction, interchangeable spindle, and wide range of spindle speeds, it ensures top working standards when milling straight components as well as complex shapes. Main Advantages of the Machine Stable cast-iron table construction ensures effective vibration damping and perfectly smooth material feed. Spindle speed range: 1400 / 4000 / 6000 / 9000 rpm enables machining of various wood species and wood-based materials. Reinforced and dynamically balanced spindle guarantees quiet and precise vibration-free operation. Height adjustment with scale allows accurate setting of machining parameters. Comprehensive standard equipment set – tilting fence, holders, and assembly tools included. Complies with all occupational health and safety regulations, DTR documentation, and CE standards – ensuring safe operation and regulatory compliance. Construction and Technology The construction of the CORMAK SH-30S PRECISA spindle moulder is based on a solid high-grade cast-iron body, effectively eliminating unwanted vibrations during operation. The 620 × 510 mm work table is precision-ground to provide even and smooth material sliding. The 2.2 kW motor (400V or 230V version available) ensures sufficient power even during intensive use. With a 100 mm spindle stroke and a maximum clamping height of 105 mm, the machine is highly versatile and suitable for a wide range of milling operations. Precision and Work Efficiency The CORMAK SH-30S PRECISA spindle moulder combines high build quality with functionality. Multi-stage spindle speed adjustment allows optimal parameter selection depending on the type of material and cutter profile. Precision guides and fences enable accurate reference point settings, resulting in repeatability and superior final finish quality. Applications The CORMAK SH-30S PRECISA model is suitable for: Professional carpentry shops and production facilities Furniture workshops and craft studios Production of decorative moldings, grooves, rebates, tenons, and finger joints Edge processing of straight and curved components Standard Equipment Tilting fence 60° left/right Workpiece holder Workpiece fence Anti-slip feet Cgodpfevugf Dsx Aa Nop Assembly tools Optional Equipment An interchangeable spindle with ER20 collet chuck allows quick changeovers and adaptation to various tools – price: PLN 700 net. Technical Specifications Motor power (S1): 2.2 kW Voltage: 400 V or 230 V Table dimensions: 620 × 510 mm Table height: 860 mm Dust extraction port: 100 mm Spindle stroke: 100 mm Max. clamping height: 105 mm Table opening: 160 mm Max. tool diameter below table: 150 mm Spindle speed: 1400 / 4000 / 6000 / 9000 rpm Spindle diameter: 30 mm Gross weight: 126 kg Overall dimensions: 640 × 660 × 1250 mm

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Codpfer A Eq Rjx Aa Nsgp Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use Cgodpfx Ajcuwptoa Nsp the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Spindle Moulder SCHELLING FZ 4 Heavy-duty cast-iron construction Motor speeds: 2250, 3000, 4500, 6000, 9000 rpm Motor power: 4.5 kW, 400 V, 50 Hz Spindle diameter: 30 mm Spindle height adjustment: 100 mm Table dimensions (L x W): 1100 x 900 mm Extraction port diameters: 120 & 80 mm Spindle with forward and reverse rotation Electric motor brake Milling fence rotatable and finely adjustable OERTLI milling fence jaws with aluminium inserts INCLUDES HOLZHER power feed unit 3 rollers 4 speeds Machine dimensions (L x W x H): 1100 x 900 x 1200 mm Machine weight: approx. 750 kg Note on used machines: • Errors in technical specifications and prior sale are excepted. • Listed prices are ex-works prices - free loading at location! • The machines have been cleaned and function-tested. Cjdpfx Ajxt N Dvsa Nogp • All machines are sold as inspected, without any form of warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Cgedpfx Ajiknp Rja Nep Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: new, The manual milling machine Omec 650-M is utilised to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. Locking and unlocking of pieces takes place manually by means of eccentric ar- bores. The controls are realised with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine. The machine is designed and built according to EC Safety Standards installed power 0,75 kW, 400 V, 50 Hz no of spindles # 1 spindle revolutions 16.500 RPM machine weight 100 kg machine dimensions (l x w x h) 450 x 540 x 1420 mm Codpfxedcdwbj Aa Nogp work piece dimensions: work piece lenght 200 – 1500 mm work piece width 60 – 280 mm intent height 5 – 18 mm front thickness 7 – 45 mm side thickness 7- 30 mm The machine is supplied with the following components: - Eccentric HSS mill cutter assembled on the machine - Tool Kit for adjustments and maintenance - User's and instruction manual

Condition: good (used), Year of construction: 1975, REX Tenoning and Mortising Machine Model ZS-400 Year of manufacture: approx. 1975 with tiltable crosscut saw 2x45° and 2 spindle speeds for the mortising spindle Technical data: - Max. clamping height of mortising spindle: 170 mm - Max. workpiece width (mortise length): 500 mm Csdex S Hfkopfx Aa Njgp - Max. cutting length (edging length): 1000 mm - Max. tenon length (with 400 mm Ø tool): 170 mm - Max. tool diameter (mortising spindle): 400 mm - Max. tool diameter (crosscut saw): 350 mm - Distance between tool spindles: 580 mm Crosscut saw: - Tiltable 0-45° - Lateral adjustment: 0-240 mm - Height adjustment: 0-200 mm - Standard cutting height: 110 mm - Saw shaft diameter: 30 mm - Drive motor: 2.3 HP - Speed: 3000 rpm Mortising unit: - Spindle dimensions: Ø40x170 mm - 2 speeds: 3000/4500 rpm - Drive motor: 7.5 HP - Foot brake Sliding table: - Height adjustment: 0-100 mm - Table size: 300x800 mm - Table top movable towards the tool - Quick-action workpiece clamping - Net weight: approx. 650 kg

Condition: new, work table dimensions 2500 x 780 mm Csdpsd Etkhofx Aa Nogp spindle DM 30 mm tilting of spindle +/- 45,50 usable spindle lenght 140 mm Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle table elongation front INCL. OPTIONS: - "Fast” table with autom. adjustment via 'Easy Touch 7' control - version “LL” with 2 cast iron tables (2500 mm) Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 1991, "BARTESAGHI" model 2BE 250 Milling machine with horizontal spindle. Vertical milling motion (top-to-bottom). Milling motor power: 10 HP (7.5 kW). Upper pneumatic cylinder for workpiece clamping. Adjustable side guides with stops for right and left side processing, enabling machining on both sides of the workpieces. Working cycle: - Manual infeed - Clamping of the workpieces via pneumatic cylinders - Milling by downward movement of the spindle - Unclamping of the workpieces Cgedpfx Aoyk Hi Ssa Nep Technical Details: - Maximum milling width: 250 mm - Maximum milling height: 150 mm - Maximum milling depth: 60 mm - Tool diameter: min. 120 mm - max. 200 mm - Milling spindle diameter: 40 mm - Motor power: 10 HP (7.5 kW), 4500 rpm - Operating air pressure: 8 bar - Extraction outlet diameter: 140 mm - Tools not included - Weight: approx. 800 kg - Transport dimensions: 80 x 120 x 200 cm SECOND-HAND MACHINE, IN GOOD CONDITION FULLY RECONDITIONED AND REPAINTED, TESTED in our workshop prior to delivery.

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 2005 - DTR, CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm Cjdpfev N Ebasx Aa Negp - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - head: 4-knife - 3 smooth pulling output rollers - dimensions length/width/height: 2630x1240x1400mm - weight: 1600kg

Condition: used, Year of construction: 1997, functionality: fully functional, total width: 1,240 mm, total length: 2,630 mm, total height: 1,400 mm, power of feed motor: 1,500 W, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 1997 - DTR - CE Cgsdpfx Aaov N Edbe Nsp TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - 4-knife head - 3 smooth pulling output rollers - dimensions L/W/H: 2630x1240x1400mm - weight: 1600kg

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, spindle diameter: 30 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table length: 2,070 mm, extraction connection diameter: 100 mm, height adjustment type: mechanical, milling spindle length: 130 mm, spindle speed (max.): 10,000 rpm, working length of spindle: 130 mm, Equipment: motor brake, – Year of manufacture: 2012 – Austrian production – Spindle adjustable from 0° to 45° – Sliding table for tenoning operations – CE marking TECHNICAL SPECIFICATIONS: – Spindle diameter: 30 mm – Spindle height: 130 mm Cgodpfoycqiysx Aa Nep – Maximum tool diameter (allows use of large milling tools): 230 mm – Maximum tool diameter at 45°: 125 mm – 4 spindle speeds: 3500 / 6500 / 8000 / 10000 rpm – Main motor power: 5.5 kW – Electric motor with brake – Table dimensions (L x W): 780 x 970 mm – Sliding table dimensions (L x W): 2070 x 350 mm – "x-Roll" sliding table – Manual height adjustment – Manual angle adjustment: 0° - 45° – Quick-change spindle system – Fence on carriage – Additional table on carriage – Right/left rotation – Extraction port diameters: 100 and 80 mm – Transport dimensions (L/W/H): 220 x 90 x 150 cm – Weight: approx. 350 kg

Condition: used, Technical data: Spindle diameter: 35 mm Spindle height: 160 mm Speeds: 3200/4200/6000/8000 Manual spindle height adjustment Spindle lock Tenoning table Cgjdpjymxw Tofx Aa Njp Adjustable fence arms Motor power: 3 kW Power supply: 380 V Equipped with 3-roller feed unit Feed speed: 3.5|7.5|10|21 m/min Additional spindle guards – 2 pcs Overall dimensions: Length: 2200 mm Width: 1400 mm Height: 1700 mm

Condition: like new (used), STARK Profile Cutter Set 119 pieces, New, partially in original packaging Article number: JA_G250801 Csdpfsw Tlrkox Aa Negp Description / Itemized list 82451 8 94011 6 600130 10 62061 9 37911 6 108611 3 108511 3 108581 6 98671 4 108601 6 53421 2 600604 1 600601 2 600607 16 600608 4 600706 7 602029 4 602062 2 602063 3 8602034 2 8602035 2 8602036 2 8602037 2 8602038 2 8602039 2 6002.06 5 Note – Used Equipment: • Prices are listed as ex works (unless stated otherwise!) from our location in Ottendorf-Okrilla, Germany – free loaded (unless otherwise specified). • Subject to prior sale! • You will receive an invoice showing VAT (MwSt.). • All items are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect items at our location. • Our general terms and conditions apply. • Special agreements are only valid if confirmed in writing. • Any items visible in the background of images are not included in the offer. • Saw blades are shown for display purposes only and are not included in the delivery scope. Shipping options: • We are happy to provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla is free of charge by prior arrangement. (Assembly and product demonstration are available optionally upon request!) • Delivery may be partially disassembled. • Optionally, our qualified service staff can install the machine at your site and provide a brief introduction. Travel, transport, and service time charges apply.

Condition: used, • Speed (rpm): 2500/4500/6000 Cgodpfefndivsx Aa Nsp

Condition: used, MARTIN T21 Table Router - used - fine-adjustable milling fence, right/left rotation ----- Technical Data ----- Cgjdpfxjw Nv Nlo Aa Njp Table size: 1,000 x 930 mm, Spindle diameter: 30 mm, Height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Extraction port Ø: 120 mm, Weight: 630 kg

Condition: used, Spindle moulder SCM T130 NPS - used - fine-adjustable fence, tenoning and slotting table, Cgsdpsw Nv Nfsfx Aa Njp right-/left-hand rotation ----- Technical Data ----- Table size: 1,080 x 750 mm, Spindle diameter: 30 mm, Speeds: 3,000/4,500/6,000/7,000/10,000 rpm, Extraction port Ø: 120 mm, Lower extraction port Ø: 120 mm