Condition: reconditioned (used), functionality: fully functional, Drive power: 55-90 kW depending on the required performance and task Hedpfsy Aubhsx Af Tjff Application: Drying and cleaning of hard plastics, PET flakes, films Output: 800-2500 kg/h depending on the input material

Condition: refurbished (used), Dry cleaner/ Friction cleaner Hfedpfx Asy Aubbsf Tef with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Hersteller: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Hodpfx Afsy Au I Us Tsff Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg

Condition: used, Year of construction: 2011, We are offering this very rarely used oil temperature control unit. It was used for research purposes. The unit still contains the thermal oil. The two connection hoses (without guarantee) are also included. Please send your price proposal—and allow us some time to respond, as we handle this alongside our main business activities. Hsdpjyk Dw Tofx Af Teff The unit must be dismantled and disconnected by your own qualified personnel, insofar as this has not already been done. All transport-related procedures and requirements must be carried out at your own cost and risk. The buyer is liable for any (consequential) damage that occurs on the premises. Collection must be completed within 14 days after the sale.

Condition: used, Year of construction: 2011, We are offering this very rarely used oil tempering unit. It was utilized for research purposes. The unit still contains the thermal oil. The two connection hoses (no guarantee) are also included. Two units are available; please see the second listing. Both are of equal specification. Please send your price offer—and allow some time for a response, as we handle these matters alongside our main activities. The unit must, if not already done, be dismantled and disconnected by your own qualified personnel. Hfedpfx Afoyk Dr Dj Tsf All transport-related procedures and requirements are to be carried out at your own expense and risk. The buyer is liable for any (consequential) damages occurring on the premises. Pickup must be completed within 14 days of sale.

Condition: new, Year of construction: 2026, functionality: fully functional, AM-20 Laboratory/Pilot Extruder with Wide-Slot/Film Die and Calender Unit Compact, vertical laboratory and pilot extruder AM-20 suitable for processing various plastics such as PP, PE, PS, ABS, PVC and other plastic granulates. The machine is equipped with a wide-slot die/film die, making it ideal for film extrusion, material testing, color and mixing trials, as well as development applications in laboratory and pilot plant environments. Additionally, calendering equipment is included, as shown in the photos. Technical data: • Model: AM-20 • Voltage: 110 V / 220 V • Input voltage: 2 x 220 V • Power: 1000 W • Screw diameter: 20 mm • L/D ratio: 15:1 • Throughput: approx. 500–1000 g/h • Dimensions: 45 x 25 x 60 cm Suitable for: • Film extrusion • Laboratory and pilot-scale trials • Material development Hedpfxjyyw T Uo Af Toff • Color and mixing tests

Year of construction: 2010, operating hours: 51,200 h, condition: ready for operation (used), screw diameter: 80 mm, This Krauss Maffei CX 650-3000 was manufactured in 2010. A robust hydraulic injection moulding machine, it features a screw diameter of 80 mm, 6 core pulls, and 6 pneumatic needle actuators. It includes an LRX 250 handling system with 4 vacuum and gripper circuits. Known defects include leaks and a non-regulating low-pressure pump. Contact us for more information about this machine. • Core pulls: 6 • Pneumatic needle actuators: 6 Hsdoyffcaepfx Af Tsff • Internal mold heaters: 12 • Cooling water circuits: 6 + 6 • Operating hours: approx. 51,200 h • Pump hours: approx. 61,500 h • Known defects: • Leaks at the upper operator-side frame • Leak at the injection unit • Low-pressure pump no longer regulates accurately Additional equipment • LRX 250 handling system • 4 vacuum circuits • 4 gripper circuits

Year of construction: 2013, condition: ready for operation (used), number of axes: 3, This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working area: approximately 1270 × 2000 mm • Maximum sheet thickness: up to 6 mm (standard setup) • Rotational tool changer for versatile punching • High precision and repeatability Hfodpoyaihvsfx Af Tef • User-friendly cnc control • Compact and space-saving design • Fast tool change for efficiency • Robust and durable construction • Automated sheet clamping for consistent results • Suitable for batch and small to medium production runs

Year of construction: 1994, condition: excellent (used), SICA-TRS 110-800.D Pipe Saw for PVC Pipes/PP/PE Application: Cutting and chamfering PVC, PE, and PP pipes With chip extraction fan Min. diameter 110 mm Max. diameter 800 mm Year of manufacture 5/1994 Accessories: Various clamping jaws Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Hfsdpsvulgtefx Af Tjf Bahnhofstraße 6 The machine is my property

Condition: refurbished (used), For sale is a servo-hydraulic mold carrier, completely overhauled by Optitek. Technical data: Current state-of-the-art: after full overhaul in 2026 Closing force: 600 kN Stripping force: 300 kN Hydraulic operating pressure: max. 250 bar Clamping area: 2,000 x 1,000 mm Parallel stroke: 750 mm Opening width: 1,350 mm Upper platen tilt: 45° Lower platen tilt: 30° Total permissible tool weight: max. 100 kN Max. upper tool weight: 50 kN Hfjdpfx Afjy Ax Ifo Tsf Travel speed: 160 mm/s Machine dimensions (L x W x H): 3,000 x 1,600 x 3,400 mm Machine weight: 8 tons Electrical connected load: 45 kW Operator side: one-sided Tank volume: 800 liters The following services have already been performed as part of the mechanical overhaul: · Disassembly of the mold carrier · Sandblasting of the mold carrier · Inspection of weld seams and restoration to proper condition if necessary · Cleaning, priming, and painting of individual mold carrier components: - Frame: RAL7035 (light grey) - Press ram: RAL3000 (flame red) · Replacement of all bearings and bushings · Refurbishment and resealing of drive cylinders · Assembly of the mold carrier

Condition: ready for operation (used), Year of construction: 2009, clamping force: 1,000 kN, total width: 1,217 mm, total height: 1,990 mm, overall weight: 4,900 kg, product length (max.): 4,480 mm, Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details. • Opening stroke: 370 mm • Platen size: 610 × 550 mm • Distance between tie bars: 420 × 360 mm • Min/Max mould height: 120 / 450 mm • Ejector force: 34 kN • Ejector stroke: 120 mm • Max mould area (250 bar): 400 cm² • Injection unit (screw options) • 32 mm: L/D 24; injection volume 169 cm³; shot weight (PS) 156 g; injection rate 95 cm³/s; injection pressure 2352 bar; plasticizing capacity (PS) 18 g/s • 37 mm: L/D 21; injection volume 219 cm³; shot weight (PS) 202 g; injection rate 127 cm³/s; injection pressure 1759 bar; plasticizing capacity (PS) 20 g/s • 45 mm: L/D 17; injection volume 324 cm³; shot weight (PS) 298 g; injection rate 188 cm³/s; injection pressure 1189 bar; plasticizing capacity (PS) 22 g/s • General injection data • Screw torque: 440 Nm • Max screw speed: 440 rpm Hfodsyzzmzspfx Af Tof • Barrel heating power: 7.5 kW • Heating zones: 3 + 1 • Nozzle contact force: 49 kN • Electrical and hydraulics • Motor power: 15 kW • Total installed power: 22.5 kW • Hydraulic oil capacity: 150 L • Footprint: 5.4 m²

Condition: ready for operation (used), Year of construction: 2018, clamping force: 1,900 kN, screw diameter: 45 mm, total height: 2,190 mm, overall weight: 8,900 kg, This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information. Hfjdpfx Afsx D H Nqe Tef Additional equipment • Air valves: 2 Machine Benefits Technical Machine Benefits • Platen size: 840 x 790 mm • Distance between uprights: 570 x 520 mm • Installation height: 200 to 550 mm • Opening width: 470 mm • Max ejector stroke: 130 mm / max ejector bar length: 320 mm • Ejector coupling type: central haitian standard Ø 32mm / m16 • Centering ring: 160 mm / cascade control: 4-fold / core pulls bwap: 2 • Hot runner control units: external • Without handling Dimensions Machine Depth 5980 mm

Condition: good (used), Transitube mixing system for mixing laser sintering material, including conveying via screw conveyor. Hsdpfx Aoyzamgsf Tjff

Condition: used, Year of construction: 2015, functionality: fully functional, The three temperature control units from BoeTherm are for sale. They have all been tested in my workshop and are fully functional. The price is per unit!!! 1. BT-90-9-D2 from 2011, €1,255 2. BT-95-09-D2-M3-V5 from 2015, €1,255 3. BT-95-09-D2-M3-V5-VA-MS from 2015, €2,250 Medium: Water Hedpfx Afoxpt Rrj Teff Heating capacity: 9 kW Pump capacity: 84 L/min Pump pressure: 2.8 bar Tank volume: 6 liters Dimensions: L: 650 mm, W: 265 mm, H: 650 mm, Weight: 45 kg

Condition: ready for operation (used), Year of construction: 2016, clamping force: 4,000 kN, screw diameter: 70 mm, total width: 2,300 mm, overall weight: 22,700 kg, product length (max.): 8,000 mm, This 3-axis Arburg 820 S 4000-2100 hydraulic injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a platen size of 1171 x 1171 mm, and a maximum mould installation height of 850 mm. With a screw diameter of 70 mm and an injection unit of 2100, this machine is well-equipped for high-quality moulding capabilities. Consider the opportunity to buy this Arburg 820 S 4000-2100 hydraulic injection moulding machine. Contact us for further details. • Control system: SELOGICA direct • Distance between tie bars: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. mould installation height: 850 mm • Max. opening stroke: 700 mm • Max. daylight: 1550 mm • Ejector force: 100 kN • Ejector stroke: 250 mm • Max. weight of movable mould half: 4500 kg • Injection unit: 2100 • Heating zones: 6 + nozzle • Drive power (hydraulic pump): approx. 55 kW • Total installed power: 88.9–96.2 kW • Total connected load: 124 kW • Operating voltage: 400 V 3~ 50 Hz • Machine cycles: 4,157,591 • Pump hours: 69,800 h • Automatic operation hours: 58,556 h • Machine options: 2x core pulls, AES Energy Saving System Additional equipment Hfsdsyzrddepfx Af Tef • ARBURG Multilift Select 15 kg robot (2016, transverse) • Load capacity: 15 kg • Y-axis stroke extension: 1400 mm • C-axis: pneumatic 0/90°, 28 Nm torque • Vacuum equipment: 2 circuits (23 l/min each) • Gripper interface: 8 inputs / 4 outputs (programmable) • Valve equipment: 5/3-way valve • Safety: monitored adjustable workspace • Conveyor belt: 800 x 2500 mm • Air blow unit

Condition: like new (used), Year of construction: 2019, operating hours: 3,825 h, functionality: fully functional, The Wittmann plus D140 temperature control unit is for sale. The device was used in a technical center, which explains the low operating hours. Original price: €5,260 - Max. water temperature: 140°C in the mold supply line - Max. system pressure: 10 bar in the mold return line Hsdpfxsy Atnye Af Toff - Pump: 0.5 kW (1.4A) / 50Hz, max. 40 l/min, max. 4.5 bar, seal-less and magnetically coupled - Heating capacity: 7.5 - 9 kW (11.5 - 12.5A) at 380 - 415V - Cooling capacity: 20 kW at ΔT = 75°C (indirect cooling) - Operating voltage: 3x 380 – 415 V, 50 Hz - Control voltage: 24V AC - Power consumption: 14.5A / 9.5kW (the total connected load increases if options such as reinforced pump or additional heating capacity are added) - Main connection: 4m cable incl. 16A CEKON plug - WITTMANN 4.0 interface including license, with shielded RJ45 socket - USB port: socket for software updates and data logging - Mold supply and return: G3/4'' female thread - Mold circuit with angle-seat strainer, mesh size 0.25mm - Water inlet and outlet: G3/8'' female thread - Strainer in water inlet: G3/8'' female thread, mesh size 0.3mm - Color: RAL7047 (Telegrey 4), front RAL3004 (Purple red) - Weight: Net: 65 kg, Gross: 82 kg (incl. pallet and packaging) - Dimensions (L x W x H): 840 x 265 x 650 mm - Dimensions incl. pallet & packaging (L x W x H): 920 x 630 x 830 mm - Fill volume: 3 liters - Noise level: 70 dB(A) Media: - Process and cooling medium: water

Year of construction: 2013, operating hours: 42,681 h, condition: ready for operation (used), controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details. Hfedpfoym Uv Ssx Af Tsf • Plasticising Size: 180 • Plasticising Arrangement: H • Screw Diameter: 28 mm • Nozzle Radius: 10 mm • Nozzle Bore: 4 mm • 3 units available

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, clamping force: 550 kN, total length: 4,220 mm, total width: 1,105 mm, total height: 2,040 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Hfodpfxoypclto Af Tsf *The video shown in this listing is of a previously refurbished BOY 55A which is very similar to the BOY 55A machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: excellent (used), Year of construction: 2008, clamping force: 1,200 kN, Injection moulding machine KraussMaffei KM 120-380 EX with automation, handling device and conveyor belt Hfsdpjytpcmjfx Af Tef

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Arburg 570 E 2000-800 moulding machine specs; Hours = 19,800 Year = purchased new in December 2013 Tonnage = 200 Screw diameter = 45mm Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Hours = very low Year = purchased new in June 2021 Travel = Z=2000mm, Y=1000mm, X=590mm Hfsdpfx Afeyxhaie Tjf comes with integrated conveyor and cell panels

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Koch is up for sale. Below are some technical details: - Designed for 135 kg/h for 7 machines - NEW PRICE of the system: €115,000 Model: CKT 500F, frequency-controlled version - 500 cubic meters/hour dry air - Touch panel control expansion for CKT/EKO dryers - Control system expansion integrated as a conveying system in CKT/EKO dryers, up to 16 points of demand - Containers: 1 x 200 liters; 4 x 150 liters; 2 x 60 liters, with cleaning door - Koch hopper heaters at 3 kW, 5 units - Koch hopper heater at 1.5 kW, 2 units - V2A extraction containers, 7 units - Stationary frames, 2 units - Economy system control for gentle material drying and maximum energy savings - Empty suction valves NW 40, double empty suction, 7 units - And much more... Hfedey Amr Eepfx Af Tof

Condition: used, Year of construction: 2003, Arburg injection moulding machine available for immediate purchase. Machine is still in operation. Viewing possible upon appointment. Full technical details in the attached documents/pictures. Clamping force (max.): 3200 kN Mold opening force (max.): 130 kN Hedjyw Snbjpfx Af Teff Opening stroke (max.): 700 mm Ejector force (max.): 100 kN Ejector stroke (max.): 250 mm Screw diameter (mm): 60/70/80 Effective screw length (L/D): 23/20/17.5 Shot volume (cm³): 792/1078/1407 Injection pressure (bar): 2500/2000/1530 Injection flow (cm³/s): 224/306/400 Distance between platens (max.):: 1000–1400 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 74,114 h, clamping force: 1,600 kN, screw diameter: 45 mm, This 5s Krauss Maffei 160-750 EX was manufactured in 2015. It features a clamping force of 1600 kN and a fully electric drive system, ensuring efficient operation. The machine has a screw diameter of 45 mm and a calculated shot volume of 302 cm³, making it suitable for various injection molding applications. Consider the opportunity to buy this Krauss Maffei 160-750 EX electrical injection moulding machine. Contact us for further details. • Injection unit size: 750 (International size rating) Hfjdpfx Aoyi D I Aef Tsf • Drive system: Fully electric (EX series) • Calculated shot volume: 302 cm³ • Max. injection pressure: 2429 bar • Distance between tie bars: 520 x 520 mm • Mold opening stroke: 450 mm • Mold height: min 200 mm, max 600 mm • Ejector stroke: 150 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 70,936 h, clamping force: 4,200 kN, screw diameter: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Mold installation height (min): 380 mm • Opening stroke: 1020 mm • Daylight (platen distance): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg Hjdpfjyhby Hjx Af Toff • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on moving side (AS) + 2 on fixed side (DS) • Shut-off nozzle: 2-fold hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Stroke volume: 1810 ccm • Shot weight (PS): 1647 g • Injection flow (PS): 498 g/s • Plasticizing flow: 106 g/s • Screw L/D: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM Linear robot, built in 2021 • Hot runner control, 12-zone • Mold sensors: Priamus (p=2 / t=0)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment Hfsdjyhbq Eepfx Af Tof • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100