Condition: excellent (used), Year of construction: 2016, operating hours: 34,000 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 320 mm, displacement volume: 85 cm³, injection pressure: 2,000 bar, injection weight: 77 g, ejector force: 30,000 N, Arburg 320C 500-170 Year of manufacture: 2016 Control system: Selogica Operating hours: approx. 34,000h (pump) Screw diameter: 30 mm Shot weight: approx. 77 g/PS Tie bar spacing: 320 x 320 mm Extras: Core pull Dedpeyyd Sksfx Ag Rjur Color dosing interface Euromap 67 handling interface Air valve Machine weight: 2,200 kg Machines are available! Subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 2016, operating hours: 45,000 h, functionality: fully functional, clamping force: 600 kN, clearance between the columns: 310 mm, ejector stroke: 110 mm, opening stroke: 270 mm, total length: 3,980 mm, total width: 1,170 mm, total height: 1,870 mm, heating capacity: 6.25 kW (8.50 HP), Haitian MA600 II/130 eco Year of manufacture: 2016 Clamping force: 60 t Immediately ready for operation. Machines are available! Dusdpfx Agsyyd Sds Rsr Subject to changes, prior sale, and errors!

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Duodpfxsyx Dz No Ag Rer Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Duedpfx Ajyx Dx Ijg Ror Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Condition: very good, like new Remark: Very few operating hours

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Dedpfxeyx Dxuj Ag Rsur Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Duedpfx Aeyx Dw Dsg Ror Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, SICA-TRS 90-500 , PLANETARY TUBE SAW PLANETARY SAW Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 100 mm Max diameter 500mm Year of construction 05-1994 Central clamp Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Djdpfjxwd Spjx Ag Rour Bahnhofstrasse 6 The machine is my property.

Year of construction: 2022, condition: ready for operation (used), 4 units Coloring Device / Dosing System for Plastic Granulate – Hydracolor 150-S/450 (TBH) For sale are a total of 4 dosing systems / coloring devices suitable for use in plastics processing or injection molding operations. Manufacturer: TBH Plastic Technology Model: Hydracolor 150-S/450 Type: Dosing system for granulate / masterbatch These units are designed for precise dosing and homogeneous blending of color masterbatch or additives directly into the material flow, ensuring reproducible coloration throughout the production process. Ideal for: - Injection molding operations - Plastics processing - Series production with consistent quality Features & Equipment: - Dosing system for plastic granulate - Hydracolor coloring unit - Microprocessor control - Connection cable / control unit - Easy integration into existing systems - Consistent and reproducible dosing - Robust industrial-grade construction Quantity: Duodjyybtxspfx Ag Ror Total of 4 units available: - 1 unused unit (new) - 3 used units, good condition Condition: - Used devices fully functional, taken from running production - Normal signs of use present - Unused device is new Special Features: - Ready for immediate use - Compact design, mountable directly on injection molding machines - Proven system in industrial applications - Machine location: Northern Bavaria _____ Our terms and conditions apply. The seller is not liable for typographical or data transmission errors. All details and images were provided by the owner and released for publication. The optical condition of the offered items corresponds to age and the images shown. Technology and wear of the offered items are appropriate to their age. Used machines are sold exclusively to commercial buyers without warranty.

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Duodpfjyxrt Tex Ag Ror

Condition: ready for operation (used), Year of construction: 2006, X: 2500 mm Y: 1000 mm Z: 1500 mm R1: 0 - 90 ° R2: 0 - 180 ° Djdpfsyyby Sjx Ag Rour

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, X: 2500 mm Y: 1000 mm Z: 1500 mm Dodpfxeyybx Ue Ag Rjur R1: 0 - 90 ° R2: 0 - 180 °

Condition: excellent (used), Year of construction: 2019, operating hours: 9,000 h, functionality: fully functional, X: 3500 mm Y: 900 mm Dedpfx Agjyybxbo Rour Z: 1800 mm R1: 182° R2: 302°

Condition: ready for operation (used), Year of construction: 2011, clamping force: 2,250 kN, screw diameter: 60 mm, injection weight: 700 g, This Husky HL225 RS65 was manufactured in 2011. It features a clamping force of 225 tons and a screw diameter of 60 mm, optimized for high-speed PET preform production. The machine includes a platen size of 750 x 750 mm and an opening stroke of 500 – 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky HL225 RS65 electrical injection moulding machine we have for sale. Contact us for further details. • Clamping Unit • System: 2-platen • Tie bar distance: 510 × 510 mm • Platen size: 750 × 750 mm • Opening stroke: 500–550 mm • Mould height: 200–600 mm • Injection Unit (RS65/60) Dsdoyxnidjpfx Ag Rsur • Injection volume: 565–650 cm³ • Injection pressure: up to ~2000 bar • Injection speed: High-speed (optimized for PET) • Electrical & Control • Technology: Full electric • Drive system: Servo motors • Energy consumption: Lower vs. hydraulic machines

Year of construction: 2020, condition: excellent (used), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD-THREE LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters 250 mm, 315 mm and 400 mm Dsdewqgitepfx Ag Rjur The pipe head was in operation for about 1 year, due to business closure. Condition not new but in very good condition Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Condition: excellent (used), Year of construction: 2005, MSM dryer (6-9) Model SD65, 2800W, with moisture regenerator, molecular sieves, with plastic intake, 2005 Dusdpfx Aoyznz Sog Rer

Year of construction: 2004, condition: excellent (used), Mill Rapid 1528, 2.2 kW, inlet 38 x 42 cm, height 173 cm, 12 knives, 2 pastry boards, 2002, 2004. Dujdpfeyzmw Eox Ag Rjr

Year of construction: 2004, condition: ready for operation (used), A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect. Dujdpfx Ajyz Anmsg Ror

Condition: ready for operation (used), Year of construction: 1988, A Bekum injection blow molding machine without molds is available. Industry: pharmaceutical, product: plastic bottles, bottle volume: 5ml/10ml, materials: PE/PP. An on-site inspection is possible. Expected to be available from July 2026. Duedoyz Ap Djpfx Ag Rsr

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) Djdpfx Ajyxdwdjg Rsur • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) Dujdefhgvwspfx Ag Rer 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value Dodpfx Aswgc I Rjg Rjur • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: like new (used), Year of construction: 2019, operating hours: 950 h, functionality: fully functional, clamping force: 1,800 kN, screw diameter: 55 mm, clearance between the columns: 710 mm, displacement volume: 653 cm³, injection pressure: 2,041 bar, mold height (min.): 300 mm, opening stroke: 650 mm, total length: 5,500 mm, total width: 1,800 mm, total height: 2,300 mm, overall weight: 10,500 kg, Injection molding machine for processing PVC-H. Conversion for processing PS/PP/PA etc. can be offered upon request! warehouse no.: 503679 manufacturer: Wittmann Battenfeld type: Smart Power XL 180-1330 controller: UNILOG B8 year of construction: 2019 operation hours: 950 h clamping force: 1800 kN distance between tie-bars h x v: 710 x 660 mm size of mould plates h x v: 950 x 955 mm min. mould height: 300 mm max. open daylight: 950 mm opening stroke: 650 mm screw diameter: 55 mm swept volume: 653 ccm injection pressure: 2041 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x air valve 1x machine with material hopper PVC-U injetion unit Schuko-socket 10A measures of machine l x w x h: 5.5m x 1.8m x 2.3m Dedpfx Ageyu Ih Ro Reur total weight: 10500KG

Year of construction: 2020, condition: excellent (used), functionality: fully functional, LICHTER LRK 200 PVC PIPE HEAD FOAM CORE PIPE HEAD - THREE-LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters from 100 mm to 200 mm Djdpoyxtnrofx Ag Rjur The pipe head was only lightly used due to shutdown of operations. Condition: in very good condition Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Condition: excellent (used), Year of construction: 1998, clamping force: 2,000 kN, screw diameter: 45 mm, injection pressure: 2,500 bar, injection weight: 240 g, mold height (min.): 250 mm, Arburg 520C-2000-675 (154) without hopper General information Product Code: 154 Availability: In Stock Year of production: 1998 Brand: Arburg Technical data Djdpfx Agovtzmts Reur Shot Weight: 240 g Clamping Force: 2,000 kN Screw dia: 45 mm Injection pressure: 2500 bar Tie bar distance: 520 x 520 mm Platen size: 715 x 715 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 44,9 kW Workinghours: 126766 h Weight: 6630 kg Dimensions: 5,6 x 1,7 m Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2005, clamping force: 1,300 kN, screw diameter: 35 mm, injection pressure: 2,500 bar, injection weight: 127 g, Arburg 470S-1300-350 (170) hybrid with electric screw drive, without hopper General information Product Code: 170 Availability: In Stock Year of production: 2005 Brand: Arburg Technical data Dusdpfxjvt Tn Nj Ag Ror Shot Weight: 127 g Clamping Force: 1,300 kN Screw dia: 35 mm Injection pressure: 2500 bar Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Mould height min.: 275 mm Type of controls: Selogica Language: German Power: 33,9 kW Workinghours: 85.400 h Weight: 5.100 kg Dimensions: 5 x 1,8 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes