Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, The machine has been partially refurbished and is ready for immediate use! The clamping side has been completely refitted with new seals and two almost new tie bars have been installed! TECHNICAL DETAILS Clamping force: 1,100 kN Screw diameter: 40 mm Distance between columns: 470 mm Shot volume: 217 cm³ Ejector force: 22,000 N Ejector stroke: 150 mm Clear opening: 900 mm Injection pressure: 2,377 bar Opening stroke: 600 mm Hodpfx Aoxzfg Nogwopa Platen length: 770 mm Platen width: 745 mm Minimum mould height: 300 mm Maximum daylight: 900 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,500 x 2,120 mm Total weight: 6,000 kg Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V EQUIPMENT Documentation / manual Display language: German CEE socket 16 A CEE socket 32 A Hydraulic core pull 2x Air valve, movable WAP Levelling elements EUROMAP 12 interface Schuko socket 10 A Note: The machine is sold without a material hopper and water battery.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,004 h, General Data Machine weight 9400 kg Measurements height 2280 mm Clamping Unit Clamping force 2000 kN Injection Unit Hpsdpfx Ajx H Uzcsgwsa Screw diameter 40 mm Dimensions Machine Length 6610 mm This DEMAG El-Exis SP 200/560-675 was manufactured in 2018. It features a screw diameter of 40 mm, a maximum dosing volume of 255 ccm, and a clamp force of 2000 KN. The tie bar distance is 560 mm, and it has a total weight of 9,400 kg. Consider the opportunity to buy this DEMAG El-Exis SP 200/560-675 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: new, Year of construction: 2025, functionality: fully functional, The SS-M screw separator from MASS is available for sale; Height: 1500 mm Screw length: 800 mm Overall width: 1060 mm Inclination angle: 30 degrees Hpsdpfex E Ry Sox Agwsa Profile: 9 mm Gap adjustment possible via wheel

Condition: used, Year of construction: 2004, This Sumitomo DEMAG injection moulding machine "Ergotech concept 200/560-840" is being offered in our online industrial auction / machinery auction for warehouse clearance of injection moulding machines. Hodpfxex Hvt Hj Agwopa You can find this and many other listings on our platform.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, manual gasfiller Hpedpfox Dtk Isx Agwea

Condition: used, Year of construction: 2008, Lot consists of: (2) Auto Tire Grinder Hpedpfxexfz H Tj Agwea Technical Details: Tires up to 21 Inches

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, TECHNICAL DETAILS Hedpoxzd R Tjfx Agwspa Clamping force: 2,500 kN Injection pressure: 2,387 bar Screw diameter: 55 mm Tie bar spacing: 630 mm Shot volume: 570 cm³ Ejector force: 58,000 N Ejector stroke: 200 mm Opening stroke: 820 mm Mold size H x V: 630 x 630 mm Platen size H x V: 995 x 1,050 mm Minimum mold height: 330 mm Maximum daylight: 1,150 mm MACHINE DETAILS Control system: MC5 Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,200 x 2,300 mm Total weight: 15,000 kg Input frequency: 50 Hz Input voltage: 400 V Operating hours: 54,872 h EQUIPMENT Documentation/manual 2x temperature control units for hot runner Screen text: German CEE socket 16A Accumulator for increased injection performance + ejector or core pull parallel operation Hydraulic core pull 1x Air valve 4x Material hopper Water manifold Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Wear-resistant plasticizing unit Note: Machine is sold without handling unit.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 19,884 h, General Data Machine weight 27000 kg Measurements height 278 mm Dimensions Machine Length 890 mm Injection Unit Screw diameter 60 mm Clamping Unit Clamping force 3500 kN This DEMAG El-Exis SP 350/820-2500 was manufactured in 2019. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a clamping force of 3500 KN, and a tie bar distance of 820 mm. With dimensions of 8.90 x 2.21 x 2.78 meters and a weight of 27,000 kg, consider the opportunity to buy this DEMAG El-Exis SP 350/820-2500 electrical injection moulding machine. Contact us for more information about this machine. Application Types Hpjdsx H U Ehspfx Agwsa Injection Moulding

Condition: used, Year of construction: 2005, This Sumitomo DEMAG injection moulding machine "System 200/560-320" is being offered for online auction as part of our industrial auction / warehouse clearance for injection moulding machines. Hpjdjx Hvttspfx Agwsa

Condition: used, Year of construction: 1996, The line has been frequently modernized since its commissioning. Line setup according to diagram: • Head • Cylinder • Gearbox • Motors • Steel frame Control system: Modernized process control system, several operator and monitoring stations (screens, control desks) can be seen. Hpsdpfxsxb Ud Rs Agwja Maintenance / condition: Frequently modernized, visually well-maintained condition. Accessories / options: Conveyor systems, cooling sections, monitoring and control units, integrated roller and handling equipment.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, TECHNICAL DETAILS Clamping force: 1,600 kN Screw diameter: 55 mm Tie bar spacing: 520 mm Injection pressure: 1,904 bar Mold dimensions (h x v): 520 x 470 mm Platen size (h x v): 710 x 660 mm Shot volume: 523 cm³ Ejector force: 33,000 N Ejector stroke: 150 mm Minimum mold height: 200 mm Maximum mold height: 600 mm Opening stroke: 1,050 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,600 x 2,300 mm Total weight: 10,900 kg Power supply type: Three-phase current Operating hours: 9,585 h EQUIPMENT Display language German CEE socket 16 A CEE socket 32 A Accumulator for increased injection performance 3 freely programmable inputs and outputs each Core pull pneumatic 2x Water manifold Levelling elements Hjdpfx Asxzd Nvsgwopa Interface for dosing unit Interface for temperature control unit USB interface Schuko socket 10 A Low-wear plasticizing unit Tool heating 24x Note: Machine is sold without material hopper.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 28,076 h, General Data Machine weight 27000 kg Measurements height 2780 mm Clamping Unit Clamping force 4200 kN Hsdpfx Asx H U Enogwjpa Injection Unit Screw diameter 60 mm Dimensions Machine Length 8900 mm This DEMAG El-Exis SP 420/820-2500 was manufactured in 2018. A robust electrical injection moulding machine, it features a screw diameter of 60 mm, a maximum dosing volume of 891 ccm, and a clamp force of 4200 KN. The tie bar distance is 820 mm. If you are looking to get high-quality moulding capabilities consider the DEMAG El-Exis SP 420/820-2500 machine we have for tact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2012, Year Modification / Upgrade 2012 Installation of Quadruplex Extrusion Line No. 02 for single tread production 2012 Foundation work for Quadruplex Extruder No. 02 2012 Installation of induction heating insert and die on Quadruplex Extruder No. 02 2013 Expansion of extrusion tooling for tread and sidewall production 2014 Two Siemens compact asynchronous motors 2017 New extruder screw (150 mm base size) for Quadruplex Extruder No. 2 2019 Closed-loop system upgrade (extended) Hpedpfsxb Uimjx Agwea 2021 Closed-loop system upgrade (extended) 2022 New 200 mm screw for Troester extruders Control system: Modern control and visualization units (control desks, operator panels) Technical data: • Extruder screws up to 200 mm (2022) • Base screw 150 mm (2017) • Siemens asynchronous motors (2014) Maintenance / condition: Regularly modernized and upgraded from 2012–2022 Accessories / options: Conveyor systems, heating and cooling units, monitoring and measuring stations, winding equipment

Condition: ready for operation (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, ejector force: 22,000 N, ejector stroke: 100 mm, Function-tested and immediately ready for operation by service for Krauss Maffei injection moulding machines! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 800 kN Screw diameter: 35 mm Tie bar spacing: 520 mm Shot volume: 154 cm³ Injection pressure: 2,429 bar Ejector force: 22,000 N Ejector stroke: 100 mm Platen length: 740 mm Platen width: 640 mm Mould mounting height: 300 mm Max. platen distance: 790 mm Tie bar dimensions (h x v): 520 x 420 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,700 x 2,000 mm Total weight: 6,500 kg Supply power type: three-phase current Input frequency: 50 Hz Operating hours: 49,673 h EQUIPMENT Hsdexzd Ixepfx Agwspa Documentation/Manual On-screen text in German CEE socket 16A 1x air valve Material hopper Water manifold Levelling elements EUROMAP 67 interface USB interface Schuko socket 10A Tool heating 24x

Condition: used, Year of construction: 1971, Lot consists of: (1) High Table Cutter Hpedpjxfz Nhefx Agwja Technical Details: Strip cutter for textile cord

Condition: good (used), Year of construction: 2013, functionality: fully functional, EA Mini 2001 SLI Stock No.: 503612 Machine type / Device type: Sprue picker Manufacturer: Geiger Model: EA Mini 2001 SLI Year of manufacture: 2013 Hpsdpfx Aexy I E Segwoa - All axes pneumatically driven - Repeat accuracy: ±0.2 mm - Combined part and gripper weight: up to 2 kg - Mains voltage: 230/110 V (50/60Hz) - Compressed air connection: 6 bar - Consumption approx. 10 Nl/cycle (without vacuum) - All EUROMAP 67 signals - Rotation module B-axis - Vacuum circuit - Metal gripper AJ2012 - Sliding console 500 mm - Unique high-speed travel system on Y-axis - Reject part evaluation Interface for injection molding machine: EUROMAP 67

Condition: used, Year of construction: 1962, Banbury Kneader / Mixer #3 with peripheral equipment Documented modifications / upgrades: Year Modification / Upgrade 1962 Gearbox upgrade Kneader III 1973 Carbon black weighing & dosing system for Kneader III 1981 Exhaust extraction system for Kneader III 1985 Batch-Off machine for Kneader 3 1985 Temperature control unit for Kneader 3 1995 DC motor 1500 HP, 1700 V, 1678 A 1996 Upgrade to KSBI-L270 Kneader III 2007 Hose scale for Kneader #3 2008 Vibration measurement system Mixer III 2008 Column-mounted slewing crane for bale handling Mixer III 2009 Vacuum hoist system Kneader III 2010 CMS system for Mixer III 2013 Long-strip cutting device for Kneader III 2014 Slab feeder for Kneader III 2014 Overnose conveyor Kneader III 2014 2 × floor scales for Kneader III 2014 New control system for Kneader III 2014 Cooling register MUAFAN 1+2 – cooling line mill Kneader 2+3 2015 Monitoring system (Kneaders I–III) for CMS Kneader III 2017 Mixer body replacement Kneader III 2023 Rubber kneader III KSBI-L270 Control system: New control system 2014, CMS system 2010, DC Drive / Automax, PLC Batch-Off & Conveyor, AC Drives documented Hedpfx Agexb T T Rewjpa Maintenance / condition: Regular modernizations and upgrades documented 1962–2023 Accessories / options: Batch-Off machine, slab feeder, put-up conveyor, long-strip cutter, floor scales, bale handling crane, vacuum hoist system, carbon black silos & weighing system, extruder, roller die, roller head with conveyor, cooling systems (dip tank, cooling line, laydown), control systems (DC Drive, AC Drive, Automax, PLC)

Condition: good (used), Year of construction: 2025, Maynards is offering the machinery and equipment from GoodYear’s 17–22 inch passenger car and SUV tire production facility in Fulda. On-site production will continue until the end of September 2025. We invite you to express your interest and submit offers for the complete facility or larger equipment packages. Immediate purchase is possible. Products (until closure): - High-performance and ultra-high-performance tires - Run-on-flat tires - SUV/4x4 tires - Diameter range: 17–22 inches Plant and Systems: - Mixing lines (Banbury 1–3) - Extrusion lines (Triplex, Quadruplex) - Apexing and filling/weighing systems - Steel cord production (winders, extruders, carousel, spoolers) - Tire building machines (R2.5, SOC-88, R1, ISR1, cutting machines) - Calendering lines (Comerio, framework, winding machines) - Tire curing and finishing lines - Tire curing presses (HF & Krupp, 77 units) - Grinding and cut-to-length machines (Matteuzzi, Collmann, Roentgen, TR5, TR7) - Cutting and calendering systems (Bias 66, KEF HTBC, rubber calender) - Tire carts - Tire testing equipment Utilities and Supply Systems: - Steam boiler systems - Water treatment - Oxygen supply & compressors Storage and Infrastructure: - Silos & oil tanks - Fire protection and safety systems (plant fire brigade) - Material handling and transport equipment (forklifts, tow tractors, pallet trucks) - Hydraulic pallet turners Hsdpfx Asxa Dqdjgwspa Workshop Area: - Maintenance of machinery and equipment Notes: - All machinery and equipment is offered “as is, where is.” - All Goodyear-specific data has been removed, and the software has been reset to factory settings.

Condition: used, Year of construction: 1973, Lot consists of: (1) Double Trimmer Hpedpsxfz I Dofx Agwsa Technical Details: Semi-Automatic

Condition: used, Year of construction: 1999, Lot consists of: (1) X-Ray Machine Technical Details: Hpodpfjxfz Iwox Agwoa Upgraded Conveyor (2008), Climate Unit (2012)

Condition: used, Year of construction: 1971, Documented modifications / upgrades: Year Modification / Upgrade 1971 Installation of four-roll calender 18" × 54" (Comerio) 1971 Safety enhancements for CTI – SQ 1986 Manual gauge monitoring system 1990 Width measuring unit 1993 Upgrade to eliminate internal blistering 1994 Modification of calender for single turn 2001 Upgrade MMI-Gum-Calender Y2000 2009 Cassette winders (2) incl. control cabinets 2009 Material width measuring system (SQ1) 2010 Overhaul gum calender (SQ-Cal.) 2012 Control system adaptation feed extruder SQ-calender Hpjdpfx Agexf Ap Nswsa 2012 Mechanical upgrade SQ-calender 2012 Gauge measurement system SQ-calender 2013 Overhaul of cooling line for gum calender (SQ-Cal.) 2014 Optimization of spool winder at SQ-calender 2018 New calender rolls Control system: Various modernizations (MMI 2001, control upgrade 2012) Technical data: Roll diameter 18", roll length 54" Maintenance / condition: Regular overhauls and modernizations documented 1971–2018 Accessories / options: Cassette winders, width measuring unit, cooling line, spool winder, gauge & width measuring systems

Condition: used, Year of construction: 1973, Continuously overhauled/upgraded Hodpfx Agsxcnf Dewjpa

Condition: used, 700-1400 creels per line, pneumatic beaks Hodsxcnr Ropfx Agwepa

Condition: used, Year of construction: 2001, Two lines available: Hpedpfjxb U Agex Agwsa Line 1 for hexagonal wire beads Line 2 for square wire beads One line consists of bead winder, bead extruder and cooling line, carousel and loader robot + coil winding.

Condition: used, Year of construction: 2012, Lot consists of: (1) Tire Testing Machine Technical Details: Test wheel: 2 m, V/MAX: 350 km/h, max. load: 2,500 kg, camber angle: 0–6° (2012) Hsdpfx Aexf Awmegwepa