Year of construction: 2024, condition: good (used), Foam Cutting Machine Hyma NSL Manufacturer: Hyma (Denmark) Model: NSL Condition: Almost like new / exhibition machine quality Year of manufacture: 2024 Machine dimensions: Cutting height: 1300 mm Cutting length: 2470 mm Left table (from blade): 2000 mm Right table (from blade): 1250 mm Side stop height: 900 mm Additional Equipment according to Hyma = AA AA6 adjustable angle side stop, 0-90 degrees Itedpfx Ahex Iwp Ej Uer AA9 upgraded drive motor, 2.2 kW AA11 electric grinding device with dust extraction (motorized and friction drive possible) AA7 extra smooth table top for stenciling Standard Equipment - Ratchet for serial cutting - Motorized height-adjustable blade guide - 4-rail roller table system - Safety protection screen The machine is connected and can be tested onsite. Machine location: Darmstadt Offered only due to internal restructuring. NO LACK OF SPACE; NO DISTRESSED SALE! _____ Our general terms and conditions apply. The seller does not assume liability for typographical or data transmission errors. All descriptions and images were provided by the owner and released for publication. The visual appearance of the items corresponds to their age and the enclosed images. The technical condition and wear of the items offered correspond to their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Itjdpfx Ahsg Ailce Uor Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Specac Specac Atlas 15T Laboratory Press with Temperature Controller, Heating Plates, and Film-Making Set Description: For sale is a complete Specac system for laboratory sample preparation. This set is particularly suitable for the production of pellets, thin films, and other samples for FTIR or materials analysis. The system includes the following devices: - Specac Atlas™ Manual Hydraulic Press (15 tons) - Specac 4000 Series™ Temperature Controller - Specac Atlas™ Heating Plates - Specac Constant Thickness Film Maker accessory set in a transport case - All relevant manuals and the original quality certificate The equipment comes from a laboratory and is in perfect technical condition. The visual condition is very good with only minor signs of use. Technical Specifications Specac Temperature Controller - Model: 4000 Series - Operating voltage: 230 V - Frequency: 50 Hz - Maximum power consumption: 1800 W - Fuse: 7 A Specac Atlas Manual Press - Maximum pressing force: 15 tons - Robust metal construction - Integrated pressure gauge - Suitable for the preparation of laboratory pellets Itodox A T T Hopfx Ah Uer Specac Heating Plates - Temperature-controlled sample heating - Direct connection to temperature controller Film-Making Set - Complete accessory case - For producing uniform sheets/films - Various inserts and tools included Scope of delivery - Atlas 15T laboratory press - 4000 Series temperature controller - Heating plates - Film-making set in case - Connection cables - Original manuals - Quality certificate (Specac, 2014) Important Note: “The table shown in the photos is not included in the sale.” Condition: Used (Specifications and details are subject to change and may contain errors!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: Isdpfsx Dkmgox Ah Uotr This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. If interested, please get in touch—further photos, datasheets, and videos are available.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Itsdpfx Asx Dip Teh Usr Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Condition: good (used), Year of construction: 2000, Lechmann*MÜH plastic sleeve welding machine, make GEORG FISCHER GF+ESA+24 S, year of manufacture approx. 2000. Itsdpfx Aovk D D Nsh Usr

Condition: excellent (used), Compressed air thermoforming machine with unwind stand, double heaters, stacking with conveyor belt Itedpfx Ahowt D Npo Uer

Condition: good (used), Year of construction: 2015, Ref. no.: 18589 Hersteller: NETSTAL Type: Elion 1750-510 M Electric machines Year of construction: 2015 Clamping unit Clamping force: 175 ton Isdoxdxpcepfx Ah Ujtr Opening stroke: 450 mm Distance between tie bars: 560 x 560 mm Mould height min.: 500 mm Mould height max.: 800 mm Platen size (h x v): 830 x 845 mm Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight: 193 g Injection pressure: 2400 bar Measurements and weight Dimensions: 7,1x2,2x2,0 m Machine weight: 12750 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, injection pressure: 3,000 bar, mold height (min.): 200 mm, opening stroke: 450 mm, overall weight: 4,800 kg, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm Itjdpfxox A Uc Ns Ah Uor injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Year of construction: 1997, condition: used, functionality: fully functional, Both Getecha mills are for sale, the price is a package deal at €900. Motor power: 1.5 kW Screen: 6 mm Itedpfx Asx Iubfoh Uer Knives are in good condition.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Itsdpfx Aox A Uu Ejh Uor Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 105 mm, clearance between the columns: 1,400 mm, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, injection weight: 4,137 g, Clamping force 950 kN Mould opening force, max. 665 kN Travel force movable platen opening 112 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1960 x 1710 mm Distance between tie bars (h x v) 1400 x 1150 mm Mould opening stroke 1800 mm Mould height min/max 600/1200 mm Max. daylight 2400 mm Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 126 1/min Plasticising rate max. 147 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 12,00 x 3,50 x 3,00 m Total machine weight 67000 kg Iodpjx Hz I Nsfx Ah Uotr Max. mould weight 20300 kg

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 54109, if you have any questions about the machine, please contact us Ijdpfx Ahoxlhtte Uetr

Year of construction: 2017, condition: good (used), Temperature control unit Tool Temp TT-181 Stock no.: 503647 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Type: TT-181 Year of manufacture: 2017 Itodpfxsx A Swqo Ah Ujr Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 6500 kN Mould opening force, max. 346 kN Ijdpfx Aex Hzzcoh Uetr Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 96 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 153 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 50 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 9,83 x 2,90 x 2,80 m Total machine weight 43170 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR300 X: 1200 mm, servo Y: 1000/1000 mm, servo Z: 3500 mm, servo C: 0 - 90° - Conveyor - saftey guard Additional options: - 1 x air valve - 6 x pneumatic sequentional valves - 12 hotrunner controller - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate

Condition: good (used), Year of construction: 2018, Temperature Control Unit Tool Temp TT-181 Stock No.: 503645 Machine/Device Type: Temperature Control Unit Iodpfx Ahsx A Swkj Uetr Manufacturer: Tool Temp Model: TT-181 Year of Manufacture: 2018 Max. Operating Temperature: 150 °C Oil Max. Operating Temperature: 90 °C Water Heating Capacity: 9 kW Water / 3 kW Oil Circulation Medium: Water or Oil

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 90 mm, displacement volume: 2,990 cm³, Clamping force 13000 kN Distance between tie bars (h x v) 1380 x 1280 mm Mould opening stroke 2200 / 1500 mm Mould height min 650 / 1350 mm Max. daylight 2850 mm Iodpfx Aox Hygwjh Ujtr Hydraulic ejector - stroke 350 mm Ejector force 230 kN Injection unit: Screw diameter 90 mm Ls/D ratio 24.4 Injection pressure 2270 bar Stroke volume 2990 ccm Shot weight (PS) 2721 gr. Screw speed 133 1/min Plasticising rate max. 88,1 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 94,5 kW Installed heating capacity 75,55 kW Reservoir capacity 1070 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,50 x 3,40 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503642 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of Manufacture: 2018 Technical Data for plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50: - Circulation medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW - via two stainless steel tubular heaters Iodpfjx A Swdex Ah Uetr - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference of 80 K between tool inlet and cooling water; minimum pressure difference in cooling water circuit: 3 bar - Pump: Bronze submersible pump, Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Microprocessor controller, self-optimizing SBC - with digital display of setpoint and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault signal • Acoustic alarm buzzer for alerts • Operating hours counter • Heating control via Solid State Relay (SSR) • Leak monitoring • Leak stop mode (suction operation) • Extraction function for tool change • Manual fill option • Dirt filter • Unit mounted on rubberized castors • Connections: Tool hose connector G 1/2" (14 mm), Cooling water hose connector G3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulation medium: Water

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 90 mm, displacement volume: 2,990 cm³, Clamping force 13000 kN Distance between tie bars (h x v) 1380 x 1280 mm Mould opening stroke 2200 / 1500 mm Mould height min 650 / 1350 mm Max. daylight 2850 mm Hydraulic ejector - stroke 350 mm Ejector force 230 kN Injection unit: Screw diameter 90 mm Ls/D ratio 24.4 Itsdpfex Hyf Tex Ah Uor Injection pressure 2270 bar Stroke volume 2990 ccm Shot weight (PS) 2721 gr. Screw speed 133 1/min Plasticising rate max. 88,1 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 94,5 kW Installed heating capacity 75,55 kW Reservoir capacity 1070 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,50 x 3,40 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Year of construction: 2017, condition: good (used), Temperature Control Unit Tool Temp TT-181 Stock No.: 503648 Machine/Device type: Temperature control unit Manufacturer: Tool Temp Ijdsx A Sv Tjpfx Ah Uotr Model: TT-181 Year of manufacture: 2017 Max. operating temperature: 150 °C oil Max. operating temperature: 90 °C water Heating capacity: 9 kW water / 3 kW oil Circulating medium: water or oil

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 90 mm, displacement volume: 2,990 cm³, Clamping force 13000 kN Distance between tie bars (h x v) 1380 x 1280 mm Mould opening stroke 2200 / 1500 mm Mould height min 650 / 1350 mm Max. daylight 2850 mm Hydraulic ejector - stroke 350 mm Ejector force 230 kN Injection unit: Screw diameter 90 mm Ls/D ratio 24.4 Injection pressure 2270 bar Stroke volume 2990 ccm Shot weight (PS) 2721 gr. Screw speed 133 1/min Plasticising rate max. 88,1 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 94,5 kW Installed heating capacity 75,55 kW Reservoir capacity 1070 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,50 x 3,40 m Total machine weight 33000 kg Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67 Iedpfox Hydvex Ah Uetr

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Itjdpfsx A Svtjx Ah Usr Stock no.: 503636 Machine type/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulation medium: Water

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 7,500 kN, screw diameter: 80 mm, displacement volume: 2,262 cm³, Clamping force 7500 kN Distance between tie bars (h x v) 1110 x 960 mm Mould opening stroke 1400 / 900 mm Mould height min 450 / 1150 mm Max. daylight 2050 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 80 mm Ls/D ratio 24.8 Injection pressure 2200 bar Stroke volume 2262 ccm Shot weight (PS) 2058 gr. Screw speed 145 1/min Plasticising rate max. 71 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 83 kW Installed heating capacity 50 kW Reservoir capacity 950 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,00 x 3,10 m Total machine weight 33000 kg Itsdpfx Ajx Hx Sfsh Uor Accessories: - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, clamping force: 7,500 kN, screw diameter: 80 mm, displacement volume: 2,262 cm³, Clamping force 7500 kN Distance between tie bars (h x v) 1110 x 960 mm Mould opening stroke 1400 / 900 mm Mould height min 450 / 1150 mm Max. daylight 2050 mm Hydraulic ejector - stroke 300 mm Ejector force 195 kN Injection unit: Screw diameter 80 mm Ls/D ratio 24.8 Injection pressure 2200 bar Stroke volume 2262 ccm Shot weight (PS) 2058 gr. Screw speed 145 1/min Plasticising rate max. 71 g/s Electric and Hydraulic Equipment: Nominal capacity of pump motor 83 kW Installed heating capacity 50 kW Reservoir capacity 950 ltr. Dimensions and weights: Dimensions of the machine ca. 9,24 x 3,00 x 3,10 m Total machine weight 33000 kg Accessories: Ijdpfx Ahsx Hx Ndj Ustr - Anti vibration pads Additional Options: - 2 x hydr. Core pulls on movable plate - 2 x hydr. core pulls on fix plate - 24 x hot runner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 2007, operating hours: 68,000 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 154 cm³, Clamping force 600 kN Mould opening stroke 335 mm Hydraulic ejector - stroke 105 mm Ejector force 19,1 kN Injection unit: Screw diameter 35 mm Injection pressure 1581 bar Stroke volume 154 ccm Shot weight (PS) 139 gr. Injection rate 151 ccm/s Screw speed 400 1/min Nozzle pressure 50,3 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 15 kW Dimensions and weights: Dimensions of the machine ca. 3,00 x 2,00 x 3,20 m Total machine weight 6800 kg Accessories: - Anti vibration pads Iedpfx Ajx Hxb Heh Uotr - Antivibration pads - 4-fold water flower