Condition: good (used), Year of construction: 2015, Wittmann S 3 Net Material suction 220 V year: 2015 price: 790 € contact: Mr. Rainer Eckerle Dedpfeyybk Dox Aizokw

Year of construction: 2000, condition: excellent (used), HAUL-OFF GRAEWE R 125/4 Year of construction 2000 With remote control Drivet chains with synchronous drive Drivet chains good Condition ready for use, in very good working order Dkjdpfx Astxvutoizew Machine is my property

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours Dksdoyf Uy Uepfx Aizow 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: excellent (used), Year of construction: 2001, Directly from mold making: ARBURG 220 S 150-30 - Year of manufacture 2001 Approx. 46,000 operating hours, screw/cylinder d18 mm (tested), Dkodpfx Aijyl Syrezjw CF card reader, very compact, ideal for small parts, minimum footprint: 2.10 m x 0.80 m, can be inspected while in operation, ex works, free loading. Without peripherals: Dryer, hopper, sprue picker GEIGER MiniServo possibly available at an extra charge.

Condition: used, Year of construction: 1996, Manufacturer: Vulcanic Model: Vulcatherm Catalogue number: 829721-01 Type: Temperature controller Date: 1996   Weight: 210 kg Max. pressure: 10 bar G Max. temperature: 90 °C Thermal fluid: water Dsdpfox R A A Nox Aizokw  

Condition: new, Year of construction: 2013, functionality: fully functional, We are selling a new, unused coloring unit Piovan Type MDP2 Year of manufacture 2013, unused, factory-new Djdpsyzccwjfx Aizokw SG 80 28/13 I 24:1 VOLUMETRIC DOSER From 5 g/h up to 150 kg/h Original price: approx. 7,000 euros High accuracy thanks to a wide range of gear ratios and an inclined screw geometry Perfect flow due to a central block design Simple and quick cleaning

Condition: used, Year of construction: 1999, Injection moulding machine Krauss-Maffei 800 /5700MC, year 1999, for sale. Technical specifications available on request. Dksdpfx Aeyg Hbgsizew

Condition: excellent (used), Year of construction: 2004, Injection molding machine NEGRI BOSSI V1250 1,250 tons Dsdew Uaw Dopfx Aizokw Year: 2004 Operating hours: 32,000 New screw and barrel

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BA 32-200, SICA MUFFENMASCHINE 2F.1T 32-200 Application: KG-U PVC pipes, Pipe lengths: 0.5 m, 1 m, 2 m, 5 m, 6 m Dkodpexiy R Esfx Aizsw Year of manufacture: 2007 1 socket per cycle Socketing tools: 110×3.2 The socketing machine is in very good condition, still operational and scheduled to be taken out of production in 3-4 months.

Condition: used, Year of construction: 1974, Vulcanizing Press Mapelli T60 Dkodpfjx Exndex Aizow Manufacturer: Mapelli Type: T60 Year of manufacture: 1974 Operating voltage: 380 V Frequency: 50 Hz Control panel: Integrated temperature controllers and operating modules Heating control: Three separately adjustable temperature zones Main switch: Present Manual/automatic operation: Selectable via control panel Safety features: Emergency stop Pressure display: Analog manometer Press area: Vertical closing unit with upper and lower heating plates Construction: Robust steel design Application: Vulcanizing and pressing of molded parts The Mapelli T60 vulcanizing press is a heavy-duty industrial press designed for reliable and uniform vulcanization processes. The robust housing made of solid steel ensures high stability and longevity. The clearly arranged control panel allows for precise adjustment of heating temperatures, operating modes, and pump functions. Three digital temperature controllers enable precise regulation of the heating plates, ensuring reproducible results during vulcanization. The vertical pressing mechanism offers a solid support and closing unit, ideal for molded parts and various materials. The machine features an integrated safety circuit including emergency stop, as well as an analog pressure gauge to monitor the pressing process. Due to its industrial design, the Mapelli T60 is excellently suited for continuous operation and offers an economical solution for companies requiring robust vulcanizing technology. No guarantee is given for the accuracy, completeness, or currentness of the information provided.

Condition: excellent (used), functionality: fully functional, MAAG EXTREX 56 melt pump station with Kreyenborg K-SWE 101 screen changer Complete melt pump station consisting of a MAAG EXTREX 56 melt pump and a Kreyenborg K-SWE 101 twin-piston screen changer. The system has already been mechanically adapted, mounted on a common base frame, and is ready for immediate use. Scope of delivery: * MAAG EXTREX 56 melt pump * Drive unit including gearbox, cardan shaft, and motor * Complete heating system for the melt pump * Kreyenborg K-SWE 101 twin-piston screen changer * Hydraulic unit Dkodpfx Aiszpw Sajzow * Manual switching via hand valve * Heating system for the screen changer * Completely mounted on a base frame * Connection box The system can be inspected and tested at our facility in Wuppertal at any time. On request, demonstrations or video calls are also possible. In addition, we have other melt pumps, screen changers, and various peripheral devices for extrusion systems in stock. We will gladly put together a suitable solution for you, tailored to your application.

Condition: used, Year of construction: 2019, Injection molding machine Demag EL Exis SP 1000/1195-6300, year of manufacture 2019. Dsdpfx Aozxxhujizjkw

Condition: used, Year of construction: 2010, Injection moulding machine Arburg 370H 600-290, year 2010, incl. Wittmann picker Injection moulding machine Arburg 470C 1500-400, year 2006, incl. Wittmann handling Dkedpfx Aioy R Tg Eozow

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator Dedpozbk Iyefx Aizokw -Condition: The machine was a demonstration unit, equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable Quantity: 1 piece available -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Condition: used, Year of construction: 2020, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. Dedpfx Ajzw D Haoizokw The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: used, CNC CONTROL Controller: C-Dias CLAMPING UNIT Clamping force kN: 4.200 Tie-bar clearance (H x V) mm: 820 INJECTION UNIT Injection unit size (Euromap): 2300 Screw diameter mm: 70 Max. shot weight (PS) g: 1.100 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 4 Hot runner control zones: 40 Handling robot (model / year): Wittmann DR 832 (2015) Robot strokes X / Y / Z mm: 900 / 1.600 / 2.500 Robot rotary axes (B / C): C servo 180° / B servo 270° Djdpjz Alptjfx Aizskw DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 187 + 114

Condition: excellent (used), Year of construction: 2017, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Djdoz Aty Hjpfx Aizokw Shot weight: 359 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 392 cm3 Injection pressure: 2000 bar Euromap 67 1x core puller Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2000, Plastic injection molding machine, Krauss Maffei, KM 300-1900 C2, dimensions: 6.21 x 2.04 x 2.38 m, weight: 12,500 kg, year of manufacture: 2000. Dodpo Agtbwjfx Aizokw

Condition: excellent (used), Year of construction: 2003, Piovan material dosing unit colouring station Type Model: MDT 14 -- 1MD 1840 Specification: PA 58D /54S M Year of construction: 2003 volumetric dosing Dodpfxohupq Eo Aizskw capacity: 0,1 to 3,2 kg./h hopper volume: 15 ltr. 2 separate dyeing stations + 1 main hopper tested for functionality before dismantling available immediately in our warehouse Hannover /Germany

Condition: like new (used), Extruder hose sections for Weber DS 10.22. Dsdpshlvm Nofx Aizokw

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. Dkodpfx Aijn Utt Hozjw * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 720S 3200-2100 Control unit: Selogica Year of manufacture: 2005 Special feature/Condition Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 constant maintenance by the manufacturer and previous owner Extras 2 x core pull robot interface machine data sheet is available on request - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm Dksdpfx Aslc R Rxeizsw platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm injection weight in polysterol: 984 g/PS available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Auger diameter: 50 mm Impact volume: 399 cc Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Dksdpfx Ajt Dx Hbjizew Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Condition: excellent (used), functionality: fully functional, Control panel taken from a working Arburg 420C 1000-350 machine. Dkodpjt Dyl Ssfx Aizsw +F00 SN 158.719A

Condition: excellent (used), Hydraulic pump, radial piston pump, Rexroth for Arburg Moog No. D955Z8001 /H Type HZR18A1RKP100TM28R1Z00DS1 Dsdpfxszdf H Ne Aizokw 100 ccm S/N 20060056