Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Ppjdpszlnxiofx Am Tow Tools: Two screwdrivers, three cut-off wheels

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42.503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 4,000 kN Platen size: 1,300 × 1,080 mm Minimum tool height: 350 mm Maximum opening stroke: 1,300 mm Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Electro-hydraulic system Rated power of pump motor: 45 kW Dimensions & Weight Dimensions (L × W × H): approx. 8,000 × 2,250 × 2,200 mm Weight: approx. 5,600 kg Ppedpszncmtjfx Am Tjw

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Psdpjzncmaefx Am Tspw Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, TECHNICAL DETAILS Clamping force: 320 t Ppodozmxdljpfx Am Tjw Shot weight: 6,935 g Screw diameter: 130 mm Output: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage EQUIPMENT Take-out system Conveyor belt, capacity: 1825 lt/h TPS robot, model: TRT-M4-72-E One of the following mold options can be selected: Option 1: MHT mold, 72-cavity, for 30.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5-liter bottles) Option 2: 72-cavity core sets for 27.8 g PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0-liter bottles) Note: In addition to the machine, only a dryer and a cooling system are required to start production.

Condition: used, Nieużywany rozbrylacz/kalibrator Gericke model 450x680. Wykonanie ze stali kwasoodpornej. Napęd silnikiem el. 5.5 kW, 1445 obr/min przez reduktor. i= 26.04/1. Robocze obroty rotora ok 55,49 obr/min. Psdpfx Amszbucho Topw

Condition: excellent (used), Year of construction: 2020, 2020 Boy 60E Injection Molding Machine Type 445 With Procan Alpha 4 Control & Apex Dynamics SH650 Unloading Robot & Conveyor Clamping Force 60 tons (600 kN). Distance Between Tie Bars 360 × 335mm. Platen Dimensions 570 × 530mm. Maximum Daylight Between Platen Approx 650mm. Clamping System: 4 Tiebar Cantilevered Two Platen Style. Maximum Opening Stroke (Adjustable) Approx 400mm. Minimum Mould Height Approx 250mm. Maximum Shot Volume Approx 170cm3. Maximum Mould Weight on Moveable Clamping Side Approx 400kg. S/No. 55761. S/No. 55761 (2020). With Shini Hopper. Weight of Machine Approx 2,250kg. Dimensions Approx 2,970mm x 2,010mm x 2,000mm High. Psdpfozn N Ahox Am Tepw

Condition: excellent (used), Year of construction: 2022, 2022 Negri Bossi M372 3300H-2100 Plastic Injection Molding Machine Ppsdpezn Nvuofx Am Tsw Platen Dimension 1,060 x 930mm. Mould Height Min/Max 220/730mm. Distance Between Tie Bars 720 x 600mm. Mould Maximum Opening Stroke 640mm. Clamping Force 330 Tonnes. Injection Unit: Shot Volume 1,190cm³, Shot Weight 1,080g. Maximum Hydraulic Pressure (Clamp) 180bar. Maximum Hydraulic Pressure (Injection) 195bar. Maximum Power 172kW. Screw Ø70mm. S/No. 372-270 (2022). With Shini Sal-330-CE Hopper Loader. Weight 12,300kg.

Condition: good (used), Year of construction: 2013, 2013 Negri Bossi M161 8000H-6700 Plastic Injection Moulding Machine Clamping Force 800 Tonnes. Maximum Hydraulic Pressure (Clamp) 205bar. Maximum Hydraulic Pressure (Injection) 180bar. Maximum Power 214kW. S/No. 161-147 (2013). Weight 30,500kg. Psdpfx Amjzn Np Ue Tjpw

Condition: used, Used Cumberland Model 15x24 granulator. Unit has a 15" x 24 " feed throat with hopper. Unit has a bed cutting chamber, the rotor is an open 3-blade with the 2 bed knives and 3 rotor knives driven by 50HP, 1475rpm motor. Weight: Estimated: Kg1000.0 Dimensions: 1400mm X 1900mm Ppodpfxszimz Dj Am Tew

Condition: used, Year of construction: 2015, MLA A21 Profile Router, Pneumatic Clamping, 2m Profile Bed Each Side, 350mm x 600mm Stroke, Pull Down Head, Weight 145kg. S/No. 133 (2015). Country of Origin: Italy Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges. Ppodpfezqdu Djx Am Tow

Condition: excellent (used), Year of construction: 2021, 2021 Negri Bossi M162 11000H-8400 Plastic Injection Molding Machine Psdpozk I Emsfx Am Tspw Platen Dimension 2,160 x 1,730mm. Screw Ø100mm. S/No. 162-551

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 186931, clamping force: 600 kN, screw diameter: 35 mm, injection pressure: 1,820 bar, injection weight: 132 g, total length: 3,665 mm, total width: 1,485 mm, total height: 1,990 mm, overall weight: 2,330 kg, pressure: 1,820 bar, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Pedpfx Amezk D Dxe Topw Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Wittmann Battenfeld 3 units of Vertical V 800/315 injection molding machines for thermoplastics Type: Vertical V 800/315 Design: Vertical Control system: Battenfeld UNILOG B4 Clamping force: 800 kN Injection unit: 315 Screw diameter: 40 mm Theoretical displacement volume: 201 cm³ Maximum shot weight: approx. 183 g Specific injection pressure: 1,575 bar Clear tie bar spacing: 370 x 420 mm Minimum mold height: 200 mm Pedjzpwrgspfx Am Tepw Maximum opening stroke: 300 mm Machine weight: 3 x approx. 5,500 kg Machine dimensions: approx. 2,917 x 1,423 x 3,643 mm Documentation and technical documents available Condition: used Dismantling and collection must be carried out by the buyer. Scope of delivery: (See image) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Manufacturer GN Model 3021C Year 2002 Condition Used Stock Number 00044 Max forming area 760 x 530 mm Max depth of draw 125 mm Cutting Length - APET 3810mm Cutting Length - All other materials 6350mm Max Sheet Width 815mm Sheet thickness range 0.15 - 1.0mm Psdpfx Ajziw R Nem Tjpw Max dry cycles / min 30 Minimum Air Pressure 6.8 bar Approx Weight 3636kg Including Premier Automation Robot Stacking Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: excellent (used), Year of construction: 2002, Manufacturer GN Model 3625D Year 2002 Condition Used Stock Number 00043 Maximum forming area 915 × 635 mm (36" × 25") Maximum film width 965 mm (38") Maximum forming depth 125 mm (5") Material thickness Typically 0.2–1.8 mm (material dependent) Drive system Servo-driven platen and sheet transport Podpfjziw Rvjx Am Tepw Air requirements 6–8 bar (90–120 psi) Max output Up to 35–40 cycles/min

Condition: good (used), Extrusion tool accessories, extruder -Manufacturer: JC Times, Extrusion Tooling Accessories -Type: unfortunately without type designations -Perforated plates: 3 pieces 1940/210/H60 mm Ppedpfx Ajzpwcxjm Tsw -Individual components: see photos -Price/Fee: complete -Transport dimensions: 3150/1095/H1790 mm / 2050/300/H900 mm -Weight: 2510 kg / 560 kg

Condition: excellent (used), functionality: fully functional, MAAG EXTREX 56 melt pump station with Kreyenborg K-SWE 101 screen changer Complete melt pump station consisting of a MAAG EXTREX 56 melt pump and a Kreyenborg K-SWE 101 twin-piston screen changer. The system has already been mechanically adapted, mounted on a common base frame, and is ready for immediate use. Scope of delivery: * MAAG EXTREX 56 melt pump * Drive unit including gearbox, cardan shaft, and motor * Complete heating system for the melt pump * Kreyenborg K-SWE 101 twin-piston screen changer * Hydraulic unit Ppsdpfx Aszpw Saem Tew * Manual switching via hand valve * Heating system for the screen changer * Completely mounted on a base frame * Connection box The system can be inspected and tested at our facility in Wuppertal at any time. On request, demonstrations or video calls are also possible. In addition, we have other melt pumps, screen changers, and various peripheral devices for extrusion systems in stock. We will gladly put together a suitable solution for you, tailored to your application.

Year of construction: 2003, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW -Inlet cross-section: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available Ppodpfx Amezn Iqko Tsw -Dimensions: 600/550/H1140 mm -Weight: 183 kg

Year of construction: 2007, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-SOLO -Drive motor: 2.2 kW -Inlet cross-section: 300 x 245 mm -Outlet: 360 x 200 mm -Sieve: Hole size 5 mm -Quantity: 1 cutting mill available -Dimensions: 630/590/H1095 mm -Weight: 158 kg Podjzn H Syjpfx Am Topw

Condition: good (used), Year of construction: 1999, Brand: Kuag Model: Kuag RA 250 6E Year of manufacture: 1999 Voltage: 3x400 V Serial number: 076999 Ppedpfx Amey Izbxj Tow

Condition: good (used), Year of construction: 1999, Brand: Kuag Model: Kuag RA 250 6E Year of manufacture: 1999 Voltage: 3x400 V Serial number: 077099 Pedpfx Amjy I Am No Topw

Condition: ready for operation (used), Year of construction: 1990, operating hours: 23,710 h, This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. – Brand: Motan – Model: MDC 800 – Construction year: 1990 Podpfxjmgadpe Am Topw – Working hours: 23,710

Year of construction: 2007, operating hours: 130 h, condition: good (used), machine/vehicle number: 32503612, This Collin inspection system has been in the machine storage at Plastima Used Machinery since 2021. The machine is from 2007 and has a normal number of working hours for its age. – Brand: Collin Pilot & Lab Solutions – Model : Coficos AIS Podpfxeld Ukpo Am Tepw – Construction year: 2007

Condition: excellent (used), functionality: fully functional, EKOCHEM Underwater Granulation Head RW-440-II - Water Ring Granulation - WRG The EKOCHEM RW-440-II is a high-performance underwater granulation head for processing a wide variety of polymer materials. Its robust construction, pneumatic knife pressure system, and closed water circuit ensure reliable and economical operation, even with high throughput rates. A suitable centrifuge for drying the granules is already installed together with the granulation unit. Technical Data * Model: RW-440-II * Throughput: 600–1,500 kg/h * Number of granulation knives: 4 * Cutting knife speed: 2,910 rpm * Cutting knife drive power: 3.0 kW * Heating zone power: 3.8 kW * Max. operating temperature: 280 °C * Max. permissible melt pressure: 120 bar Features / Advantages Pedpfeznu S Uex Am Tepw * Compact and robust design * Pneumatic knife pressure system * Precise knife centering thanks to linearly guided knife holder * Fast and easy knife change * Free access to the interior for maintenance work * Short setup and maintenance times * Suitable for a wide range of polymer materials * Granule size can be individually adjusted The system is in very good condition, fully functional, and immediately available from stock. An inspection can be arranged at any time.

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 Ppodpfx Asgrzh Eom Tow 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection