Condition: used, Storage location: Nattheim Lajdpfxsvvkrds Ah Ujk

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting Panel Saw T 73 by Martin with 3-axis scorer and 3m table Sliding table length: 3000 mm Saw blade tilt: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Main drive motor: 5.5 kW with automatic motor brake Saw blade diameter up to 500 mm Maximum cutting height: 170 mm Cutting width up to 1100 mm, adjustable via handwheel from the front and moveable by hand Tilting angle and height adjustment are motorized Crosscut fence with 2-point support, up to approx. 3350 mm Ljdpfx Ajxtvcxeh Ueak Parallelogram cross table with digital angle display and roller Folding rip fence Dust extraction outlets: 120 + 100 mm Sliding carriage can be locked in any position Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scoring unit, fully motorized, adjustable while the machine is running 2 safety hoods Mitre fence for acute angles Tool compartment Emergency stop switch Operating manual CE marking Machine shows minor signs of use on the anodized sliding table. Small cuts on the sliding table have been repaired. Original paint, only partially touched up. Excellent condition as seen in the original photos. Dimensions approx. 3300 x 3750 x 1600 mm (LxWxH). Weight approx. 1950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "other offers from this provider".

Condition: used, Year of construction: 1982, 1 unit table saw SCHEPPACH PRIMA-TKU Saw blade diameter max. 315mm, as per images and inspection Year of manufacture: 1982 Condition: used Payment method: advance payment by bank transfer Location of goods: warehouse hall Lodpfox If S Uex Ah Usak Shipping: Collection only – shipping is not offered for this item!

Condition: new, Year of construction: 2022, functionality: fully functional, Holtec ES 121 SHK 4 m Year of manufacture: 2022 Control: Simatic HMI Saw chain: 4788 (190 cm) Guide bar: 3322 (190 cm) Sawn timber data: Packages for cutting: Max. 4200, an.= 1200 al.= 1200, Minimum: 2,500 Packages after cutting: max: 4,000, min: 700 Cutting waste: max. 300 Operating voltage: 400 V 50 Hz Oil filling: HLP-D-32 Tank capacity: 70 l Pressure: 70 bar Ljdpfxox Dmavo Ah Ujak The machine is unused and dismantled. Inspection possible at any time.

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband Lasdpsv Sfp Aofx Ah Uek uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: used, Kölle Formatic Panel Saw - Year of manufacture: 1997 - 5.5 kW motor - 400 Volt - Weight: 1050 kg - Overhead control panel - 4 speeds - Electric lifting, lowering & tilting - Digital display for fence Ljdpfx Ahsx Ha Rvj Usak - Cutting width 1 m right of the blade - Brake motor - 2800 mm - Cutting height 145 mm without scorer

Condition: used, Max. blade length: 5600 mm Roller diameter: 800 mm Max. cutting height: 520 mm Max. cutting width: 770 mm Table tiltable: Yes Stand side: Left Stop ruler: Yes Saw blade guide: Roller guide Design: Stationary Weight approx.: 800 kg Storage location: Nattheim Lodpfx Asvvkmueh Ueak

Condition: not inspected (used), Year of construction: 1981, functionality: unexamined, machine/vehicle number: 3124, Edging saw Esterer DKV-5S The machine has already been dismantled Year of manufacture: 1981 55 kW saw motor Lodpfxjuy Ib Ie Ah Usak Without electrical installation With extraction system ASV/B Year of manufacture: 1981 The machine is being sold as is.

Condition: excellent (used), Machine available March 2026 Cutting length: 4400 mm Cutting width: 4400 mm 6 clamps (first 3 are double-fingered) 4 air cushion tables 2100 x 600 mm Air cushion blower with integrated frequency control (performance increase approx. 70%) Cut-out & stress-relief cut program Labeling program Label printer type PICA 104 CAD plan optimization program CADMATIC 3.0 Automatic, stepless cutting height limitation Automatic cutting length limitation Motorized scoring saw adjustment from the control panel Steplessly adjustable feed speed from the control panel Saw blade projection 72 mm Ledpfx Aox Iv Dheh Usak Saw carriage feed 5 - 80 m/min Program pusher 60 m/min Angle pressure device along the entire cutting length Main saw motor 7.5 kW (10 hp) Scoring motor 1.1 kW (1.5 hp) Main saw blade D = 350 x 4.4 x 75 mm Scoring blade D = 200 x 4.4 - 5.4 x 45 mm

Condition: used, total length: 7,600 mm, total height: 1,800 mm, total width: 1,400 mm, - Documentation available: No - CE certificate present: No - Serial number: 04946 - Saw blade bore diameter [mm]: 80 - Max. saw blade diameter [mm]: 400 - Max. cutting length [mm]: 4350 - Max. cutting width [mm]: 4455 - Max. cutting height [mm]: 110 - Options: Voorritser - Feed speed: - └ Max. feed speed [m/min]: 25 Lodpfxsxb Azqe Ah Usak - Transport dimensions: 7600mm x 1400mm x 1800mm (l x w x h) - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2020, Maximum height 135 mm Maximum width 750 mm Minimum length 650 mm Cam chain width 350mm Maximum blade diameter 381 mm Mini blade diameter 250 mm Ljdpfx Aex A Dzujh Ueak Motor shaft 40 kW Electronic forward speed from 7.5 to 30m/min Voltage 380 V Supplied with several blades, adjustment rings, machine documents and service keys CE Machine almost new, working +- 10h!!!! New price for similar machine: around €49,000

Condition: used, Panel saw F90 - Sliding table length: 3800 mm - Year of manufacture: 1981 - 800 mm right of the blade - 7.5 HP - 400 mm saw blade diameter - Margin scheme taxation Laedpox E A Tksfx Ah Ujk

Condition: used, Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 770 kg Ljdpfx Aswayzbsh Uoak Storage location: Nattheim

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: L'invincibile SI X - PANEL SAW WITH DOUBLE BLADE TILTING 931201 Frequency: 50 Hz 570348 Scoring unit with independent motorization 570351 LED lighting in the scorer area 530130 "Full Support & Wireless" 570353 Extension with roller track on the rip fence side Lodpfsx Enrxex Ah Uoak 080999 Ex works R01264 L'invincibile SI X CE version 083202 Base 109993 MACHINE LANGUAGE: German 930731 Voltage: 400V EU 080685 Additional packaging 109999 Standard safety regulations Article number: SI X Variant: R021401 Availability: upon request Location: Flörsheim

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm Lasdstxkpropfx Ah Uek -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9000x1400x1680 mm Weight 1600 kg Lodpfjv A E Ndjx Ah Uoak Total power requirement 7,5 kw - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting fixed lengths according to cut lists and cutting out defective sections Cutting cycle: Defect trimming via chalk marking Cutting to fixed lengths, standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths with single piece loading WS.1 Through-feed crosscut saw Lsdpsx Da Tvjfx Ah Ueak 4 pcs. lower feed rollers 1 pc. loading table, 2 meters, right side, with dual marking table 1 pc. outfeed table, 1 meter, with rear stop Roller height adjustable manually 12 pcs. luminescent chalk sticks Cutting capacity: Position A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Position B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control system with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming options: - Defect trimming via marking - Operation with cut list consisting of 10 dimensions; repeat option for each dimension; total number of pieces for each dimension 100 storage slots for cut lists Detection system for the last two pieces to be cut and the following piece Electronic control of sorting unit with No.1 ejection kicker (ejection kicker optional) Technical specifications: Feed system adjustable by motor, brushless and with toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm TCT blade diameter 500 mm Motor power 7.5 kW Cutting cycles per minute up to No. 100 Minimum workpiece length 550 mm Minimum workpiece width 40 mm Minimum workpiece thickness 15 mm On request: ZA295 Additional loading table with dual marking table ZA110 Outfeed table ZA058 TCT saw blade Ø 500 mm ZA296 Motorized adjustment of roller height

Condition: excellent (used), Year of construction: 1977, Panel saw Scoring unit Year of manufacture: 1977 Ljdpfx Aswc Svpoh Ujak 1250 mm to the right of the blade 2800 mm cutting length 5.5 kW Dimensions approx. 2800 x 1200 x 950 mm Weight approx. 900 kg Not tiltable

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Lasdpewhzg Usfx Ah Usk Location: Nattheim

Condition: used, Martin type T70 panel saw for edging and sizing wood and other panel materials. Ledpfx Ahexqfghj Usak Sled length: 2.500 mm cutting height: about 100 mm

Condition: used, Year of construction: 1980, 400 mm Lasdpfjxzu Dwsx Ah Ujk weight 1,3 t miter ja

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Lsdpfxjwqifkj Ah Uoak Condition: Guides slightly worn, only suitable for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 mm Availability: short-term Storage location: Flörsheim

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Lajdpsx Dax Esfx Ah Usk Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: used, Wheel diameter: 500 mm Laedpfxowl D S Uj Ah Uek Storage location: Nattheim

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Lodoxnlgcspfx Ah Uoak Storage location: Garbsen