Used turning automatic lathes for sale (213)

Condition: ready for operation (used), Year of construction: 2006, bar diameter (max.): 10 mm, controller manufacturer: FANUC, controller model: 16i-TB, number of axes: 9, Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details. • Overhauled in 2016: • Checked machine, ball screws (replaced if necessary), guides, guide bushing, main and counter spindles • Complete cleaning • Maintenance carried out in accordance with Block 3 • Replacement of all drive belts • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/features: • Moving headstock Blsdsytcalepfx Al Ijg • Directed spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross slide with 4 tool holders • Sensor for tool breakage detection Additional equipment • Automatic and integrated bar loader (oil bath) TORNOS-BECHLER Type SSF-210, equipped with Robobar SSF 3 m loading magazine • Max. bar length: 3.2 m • Bar capacity: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without clamp) • “HYBRIDE 10+5” drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum • Integrated 25 L hydraulic unit with filter • Front/rear support foot, center height 1100 mm • Electrical control box (diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Color: Anthracite RAL 7016 / Gray RAL 7035 Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2000, bar diameter (max.): 7 mm, number of axes: 9, Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details. • Movable headstock • Directional spindle stop S1 • Cross slide with 4 tool holders T11–T24 with vertical and horizontal movement • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Motorization S2 • Integrated 25-liter hydraulic unit with filter • Electrical control box • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Additional equipment Bljdpfx Aljyr Nfls Ijg • Loading magazine with drum (bar feeder) • “HYBRIDE 10+5” drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation up to 8 mm) • 3 pre-settable turning tool holders • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Front/rear support foot, center height 1100 mm Technical Specification Counter Spindle No

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Fanuc control, turret with Y-axis, two Y-axes on driven tools, sub-spindle, chip conveyor, FMB bar feeder, extensive accessories. Bledpjyvi Amsfx Al Ieg

Condition: good (used), Year of construction: 2018, functionality: fully functional, Fanuc control, sub spindle, driven tools, chip conveyor, FMB bar feeder. Bedpfxoyviyxo Al Ielg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Fanuc control, sub spindle, driven tools, chip conveyor, FMB bar feeder. Bljdpfx Alsyviw Ds Ieg

Condition: ready for operation (used), Year of construction: 2004, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, controller manufacturer: CINCOM, This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2004. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details. Machine Benefits Technical Machine Benefits • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm Bedeyi Eh Rspfx Al Ijlg • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7. 000 rpm, max. Back-spindle power: 3,5 kw • Gang rotary tool: 5 fixed tools - 4 driven tools • Turret tools: 10 positions • Bar feeder: lemca boss 332 e/r type 37ll - year 2005 • Equipment: chip conveyor

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. 2 similar machines available! Additional information Bjdpfsx D Dliox Al Iolg • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Sensor for tool breakage detection • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock • Directed spindle stopOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2000, spindle motor power: 3,700 W, spindle speed (max.): 8,000 rpm, overall weight: 2,200 kg, total height: 1,700 mm, number of axes: 2, Swiss type turning machine manufactured in 2000. This Star SR 20 R was designed for precision turning with a maximum turning diameter of 20 mm and a spindle speed of 8,000 rpm. It features 6 fixed turning tool stations and 4 radial motorized tool stations, providing versatility for various applications. Consider the opportunity to buy this Star SR 20 R swiss type turning machine. Contact us for further details. • Capacities • Maximum turning diameter: 20 mm • Maximum mobile tailstock travel (single clamping): 205 mm • Maximum workpiece diameter / through bore: 20 mm • Maximum workpiece length (front ejection): 80 mm • Spindle • Spindle bore diameter: 20 mm • Feeds • Rapid feed (linear axes): 20 m/min • Rapid feed (C-axis): 90,000°/min • Maximum cutting feed (linear axes): 10 m/min • Maximum cutting feed (C-axis): 10,000°/min • Tooling • Fixed turning tool: M8 × 1.25 • Rotary tool on comb slide: M6 × 1 Bedpfx Asyibndjl Ielg • End mill on comb slide: Ø 10 mm • Fixed turning tool stations (std/opt): 6 • Tool shank diameter (std/opt): 12 mm • Radial motorized tool stations: 4 • Max speed of motorized units: 8,000 rpm • Max power of motorized units: 1.2 kW • Fixed drilling/tapping tool stations: 4 • Max collet diameter (ER collet): 10 mm • Max drilling capacity (C45 steel): 8 mm • Max tapping capacity (C45 steel): M8 × 1.25 / M6 × 1 • Power and utilities • Available power: 2.2 kW • Total installed power: 7 kVA • Tank capacity: 155 L • Machine dimensions & weight • Maximum footprint: 2.21 × 1.08 m • Axes • Number of axes: 2 (X and C)

Condition: ready for operation (used), Year of construction: 2005, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2005. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details. Machine Benefits Technical Machine Benefits • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7. 000 rpm, max. Back-spindle power: 3,5 kw • Gang rotary tool: 5 fixed tools + 4 driven tools • Turret tools: 10 positions Bljdjyi Eihopfx Al Isg • Bar feeder: iemca boss 332 e/r type 37ll - year 2008 • Equipment: chip conveyor

Condition: ready for operation (used), Year of construction: 2005, spindle motor power: 3,700 W, spindle speed (max.): 15,000 rpm, overall weight: 1,950 kg, total height: 1,050 mm, number of axes: 4, This 4-axis Citizen K16 VIP swiss type turning machine was manufactured in 2005. It features a max machining diameter of 16 mm, with spindle speeds up to 15,000 rpm on the main spindle and 10,000 rpm on the sub-spindle. Ideal for precision work, it supports a variety of tooling options. A great opportunity to buy this Citizen K16 VIP swiss type turning machine. For more information about this swiss type turning machine, please reach out to us. Additional equipment • Turning tools: 5 • Drilling tools (front): 4 • End working tools (back): 4 • Tool holder, quill (diameter): 20 mm • Tool holder, turning tools (shank section): 12 mm Machine Benefits Technical Machine Benefits Blsdpfxox D N Ivs Al Ijg • High spindle speed, precision indexing, rapid traverse capabilities. Qualitative machine benefits: robust design, compact dimensions, stability during operations. • Input power: 8 kva Extra Information Machine still under power Dimensions Machine Depth 1850 mm

Condition: ready for operation (used), Year of construction: 2010, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, directional spindle stop, and cross slides with tool holders. It includes an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also comes with a loading magazine, integrated hydraulic unit, and an electrical control box. If you are looking to get high-quality turning capabilities consider the TORNOS DECO 10a machine we have for sale. Contact us for more information. Additional information • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Movable headstock • Directional spindle stop S1 • Independent counter spindle • Pivoting workpiece holder on the counter spindle Blodsx D Dmtjpfx Al Ijg • Lubrication device for guide bushing with filter • Tapping attachment for collet chuck ESX 12 • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Electrical control box • Motor voltage 400 V • Control voltage 24 VOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 8,000 rpm, controller manufacturer: FANUC, controller model: na, number of axes: 9, This 9-axis Hanwha XE 26 H was manufactured in 2017, featuring a sophisticated control unit. Ideal for complex horizontal turning operations, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities consider the Hanwha XE 26 H machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Z-axis: z1 axis travel: 210 mm (with bushing) • Z-axis: z2 axis travel: 215 mm Extra Information Inventory number: 00191 Type: Mobile turret lathe Condition: Used Status: Excellent Axes: 9 (5 linear + 4 rotary) Sub-spindle turning diameter: Ø 26 mm Sub-spindle speed: 8,000 rpm Sub-spindle motor power: 1.5/2.2 kW Bljdpfx Aleyalnro Ijg Index: 0.001°

Condition: ready for operation (used), Year of construction: 2003, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, directional spindle stop, and multiple cross-slides with tool holders for versatile machining. Equipped with a counter-spindle and programming software in five languages, it's ideal for complex turning tasks. Includes interfaces for bar feeders and tool breakage detection. Reach out for more information about this machine. Additional information Bedpfx Aljx D Dm Ho Ijlg • TB-DBCO Version 6 programming software: Single-user product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language • Movable headstock: S1/Z1 axis, n = 16000 rpm, F13 collet chuck • Spindle stop: Directional spindle stop S1 (programming increment 0.1 degrees) • Cross-slides: • 1 cross-slide with 4 tool holders (X1 and Y1 axes) • 1 cross-slide with 3 tool holders (Z3 and X3 axes) • 1 cross-slide with horizontal and vertical movement (Z4 and X4 axes) • Pneumatic cylinders: 3 independent for quick positioning • Counter-spindle: Independent (S4), n = 12000 rpm, F13 collet chuck • Cross Slide Support Options: • Pre-adjustable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation direction: right • S2 motorization (electric/mechanical) for driven units on the X2-Y2 linear tool carrier • Driven end drilling/milling unit: Max. speed 12000 rpm • Cross drilling/milling/tapping attachment for BSX 12 collet chuck • Sensor: Tool breakage detection with TYPE MIDI-DETECTOR, oscillating probe type MINI-DETECTOR, electrical interface, pneumatic control equipment • Interface: Adapting an LNS bar feeder • Spinde Speed: n = 16000 rpm indicates the machine has a moderate spindle speed ional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. 2017 overhauled and two further similar machines available (both overhauled 2018)Overhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC Bjdpex D D Ikefx Al Islg • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Equipment to be equipped with Robobar SSF 3 m loading magazine Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2004, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, controller manufacturer: FANUC, controller model: Series 18i-TB, number of axes: 7, This STAR SR-20 R II Lathe was manufactured in the year 2004. It is equipped with a Fanuc Series 18i-TB control unit and has 7 axis. The machine has a spindle speed of 500-10000 rpm. Machine Benefits Bledpfx Ajyi Emmel Isg Technical Machine Benefits • Turning length: 205 mm • Max. Bar diameter: Ø 20 mm • Max. Turning diameter from bar: Ø 20 mm • Counter-spindle rotation speed: 8000 rpm, engine power: 2. 2 kw • Fmb bar loader mod. Turbo 3-26/3200/a

Condition: ready for operation (used), Year of construction: 2015, spindle motor power: 7,500 W, spindle speed (max.): 7,000 rpm, overall weight: 2,200 kg, total height: 1,700 mm, workpiece diameter (max.): 32 mm, number of axes: 7, This 7-axis Star SR-20J type C Swiss Type Turning was manufactured in 2015. It features a maximum machining diameter of 32mm, headstock stroke of 310mm, and spindle speeds up to 7,000rpm. Equipped with a Hydrajet BF20-2000 high-pressure coolant system and an Absolent A.Mist 10S mist extraction unit, the Star SR-20J type C represents a robust addition to any machining setup. Contact us for further details regarding this Swiss Type Turning. Additional equipment • High Pressure Coolant System: Hydrajet BF20-2000 • Mist Extraction Unit: Absolent A.Mist 10S • Fire Suppressor: Stat X • Signal Production Tower: Werna Machine Benefits Qualitative Machine Benefits • Includes comprehensive safety and environmental management systems (fire suppressor, mist extraction) Technical Machine Benefits Bsdpfjyi Emtox Al Ielg • Rapid feed rate 24m/min, maximum spindle speed 7000 rpm, maximum driven tool speed 6000 rpm Extra Information Manuals included Machine still under power Dimensions Machine Depth 2250 mm

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 12,000 rpm, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a "HYBRIDE 10+5" drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine. Additional information • Electrical control box • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Pivoting workpiece holder on the counter spindle • Directional spindle stop S1 • 3 pre-settable turning tool holders • 4 fixed tool holders • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Independent counter spindle • Tapping attachment for collet chuck ESX 12 • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mmOptional: Comprehensive package of measuring instruments Bjdpfjx D Dmyex Al Iolg Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: FANUC, This ESCO Escomatic EC12 was manufactured in 2010. A Swiss type turning machine, it's ideal for precision and efficiency in small part production. Contact us for more information about this machine. Additional equipment • 3x automatic bar feeders • 1x decoiler unit Bsdpfxsyar E Rj Al Ielg Machine Benefits Technical Machine Benefits • Bar capacity (through spindle): up to 12 mm • Rated power: 15 kva • Rated current: 32 a • Working voltage: 3-phase, 400v / 50hz • Control voltage: 24v dc • Type of current: ac • Lighting voltage: 24v dc Extra Information 3x identical, fully functional machines available Additional spare parts are also included

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, overall weight: 3,200 kg, This CITIZEN M32V Swiss Type Turning was manufactured in the year 2007 in Japan. The machine has a spindle speed of 8000 rpm. Official brochure attached for more details. Machine Benefits Technical Machine Benefits • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7000 rpm • Max. Back-spindle power: 2 kw • Gang rotary tool: 5 fixed tools • Turret tools: 10 positions • Bar feeder: iemca boss 332 e/r type 37ll Bljdpfxoyi Eins Al Ijg • Equipment: chip conveyor

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 8,000 rpm, overall weight: 3,400 kg, total height: 2,020 mm, controller manufacturer: FANUC, controller model: 32i-B CNC, number of axes: 6, This 6-axis TSUGAMI HS32 swiss type turning machine was manufactured in 2011. It features a maximum bar capacity of 32 mm and is equipped with a Fanuc 32i-B CNC control system. The main and sub-spindle speeds reach up to 8,000 rpm, with live tool speed up to 5,000 rpm. Consider the opportunity to buy this TSUGAMI HS32 swiss type turning machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Maximum bar capacity: 32 mm (1. 26 inches) • Live tool speed: up to 5000 rpm Extra Information Bedpfsx D R Uqex Al Ielg Machine still under power Dimensions Machine Depth 2020 mm

Condition: ready for operation (used), Year of construction: 2007, bar diameter (max.): 10 mm, number of axes: 7, This TORNOS DECO 10e was manufactured in 2007. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and multiple tool holders for versatile operations. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Ideal for precision turning with a lathe capacity of 10 mm. Consider the opportunity to buy this TORNOS DECO 10e Swiss type turning machine. Contact us for more information. 2 similar units available!Additional information • Movable headstock • Directional spindle stop S1 Bsdjx D Dmmjpfx Al Islg • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bush with filter • 3 pre-settable turning tool holders • Motorization S2 • Tapping attachment for collet chuck ESX 12 • 4 fixed tool holders • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Electrical control box • Motor voltage 400 V • Control voltage 24 V • Lathe capacity 10 mmOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,578 h, bar diameter (max.): 8 mm, number of axes: 9, This Tornos Deco 10 was manufactured in 2005. A swiss type turning machine featuring a drum with loading magazine, a filter with a 25-liter capacity, and an integrated hydraulic unit. It supports various bar diameters up to 8 mm, ensuring versatility for precision work. Consider the opportunity to buy this Tornos Deco 10 swiss type turning machine. Contact us for more information. • Drum with loading magazine • 10+5" HYBRID drum • Integrated hydraulic unit • Support leg rear/front • 1100 mm center height • Filter with 25 liter capacity • Electrical: 380 V, 3-phase, 50/60 Hz motor voltage • Control voltage: 24 V DC • Bar compatibility (for 14 guide tubes): • 1–4 mm diameter bars • 4 mm diameter bars • 8 mm diameter bars Additional equipment Bsdpfxex D Dm Tj Al Islg • 1 piece oil basin • 1 chip collecting basinOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, controller manufacturer: FANUC, controller model: Series Oi-TD, number of axes: 5, This 5-axis TORNOS Delta 20/5 was manufactured in 2008. It features dual spindles, each capable of handling bars up to 20 mm in diameter and 170 mm in length, with speeds up to 10,000 rpm. Powered by a Fanuc Series Oi-TD CNC and equipped with a Robobar barfeed magazine, this swiss type turning machine is ideal for precision work. Contact us for more information about this machine. • Number of spindles: 2 • Main spindle: • Max. bar diameter: 20 mm • Max. machinable length: 170 mm • Driven guide bush • Counter spindle: • Max. bar diameter: 20 mm • Spindle speed: 10,000 rpm Blsdsx Sz A Djpfx Al Ijg • Spindle drive power: 2.2 kW Additional equipment • Barfeed magazine: Robobar

Condition: ready for operation (used), Year of construction: 2010, bar diameter (max.): 10 mm, number of axes: 7, This Tornos DECO 10e was manufactured in 2010. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and independent counter spindle. It includes a loading magazine with drum and an integrated 25-liter hydraulic unit. Ideal for precise small-scale turning, this machine also supports bar sizes from 1 to 10 mm without preparation up to 8 mm. Contact us for more information about this machine. Additional information Blodpfex D Dndox Al Ijg • Electrical control box • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Movable headstock • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12000 rpmOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Specification • Control system: Fanuc 310i-S • Mechanical and electrical preparation for fire extinguishing system • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 liters • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar loader: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E Bjdpfxex D H I To Al Ielg • Sliding headstock travel: 80 mm • Tooling on slides • Tool breakage detection system • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (upgraded) • Machine duty hours: 29,200 h Machine Benefits Technical Machine Benefits • Chip discharge height: 1250mm Extra Information Machine still under power