Used Turning automatic lathes for sale (249)

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Lasdewuddvopfx Ag Nsh Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: good (used), Year of construction: 1999, CNC long turning machine Manufacturer: CITIZEN Laodjwpifzopfx Ag Neh Model: B12 Year of manufacture: 1999 with: Mitsubishi Meldas control synchronous spindle backside machining bar loader magazine IEMCA CH112/37

Condition: used, Year of construction: 2022, bar material dia. 25 mm spindle passage 30 mm turning length 250 mm turning speeds 10000 U/min c-axis 0,001 Grad gripping station 25 mm turning length 100 mm turning speeds 10000 U/min c-axis 0,001 0 number of tools 59 fix number of milling stations 15 driven control Mitsubishi M850W Number of axles 10+2 St. total power requirement 5,5 kW weight of the machine ca. 3450 kg dimensions of the machine ca. 2,55 x 1,5 x 1,85 + Irco m CNC sliding headstock machine Citizen D25-1M8, built 2022 with barloader Breuning Irco Simag ON/OFF 7.776h Running hours 5.331h GBL function (standard) LFV function: yes There are two D25 machines available, free from September 2024. They have same Laodpewhzrdjfx Ag Neh equipment.

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min rapid traverse 30 m/min Ledsvh I Tvspfx Ag Njah total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2005, operating hours: 56,729 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, No minimum price – guaranteed sale to the highest bid! TECHNICAL DETAILS Max. spindle speed: 10,000 rpm Number of spindles: 2 Bar through-hole: 20 mm Driven tools: yes Main spindle speed range up to: 10,000 /min Counter spindle speed range up to: 8,000 /min Cross-slide speed range up to: 4,500 /min MACHINE DETAILS Total weight: 2,150 kg Total height: 2,000 mm Required space length: 3,000 mm Required space width: 1,400 mm Connection voltage: 400 V Mains frequency: 50 Hz Operating hours: approx. 56,729 h EQUIPMENT - CNC control CINCOM M7 - Bar loader LNS Hydrobar Express 220 - Fire extinguishing system Lasdpfowqgwdjx Ag Nsh

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST-38-BG-0101, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, overall weight: 3,900 kg, TECHNICAL DETAILS Model: STL38H Serial number: ST-38-BG-0101 Year of manufacture: 2011 Maximum working diameter: 32 mm Maximum rotational speed: 8,000 rpm MACHINE DETAILS Laedpfxjwwqzye Ag Njh Rated voltage: 3-phase, 220-240/380-415 V AC Rated current: 100 A Rated frequency: 50/60 Hz Axis control: 8/6 axes Operating air pressure: 4–6 kg/cm² Dimensions: 3,742 x 1,729 x 1,800 mm Weight: 3,900 kg EQUIPMENT Bar feeder: FMB Turbo 5-55

Condition: good (used), 1 x CNC Sliding Head Lathe Hanwha LA 25 Year of manufacture: 1996 with bar feeder Iemca Mini Boss 325r CNC The machine can be inspected at our warehouse. Laodjwpp Ezspfx Ag Neh

Condition: good (used), Year of construction: 2004, CNC long-turning automatic machine Manufacturer: CITIZEN Type: C16 VII Year of manufacture: 2004 with: Mitsubishi Meldas control Synchron spindle Driven tools Ledpewnr Rwjfx Ag Noah Back machining High pressure pump Oil mist extraction system Fire extinguishing system Bar loader magazine IEMCA GENIUS 118

Condition: good (used), Year of construction: 2003, Please contact only by email! Many thanks. Good condition. The machine was running until the end and is being sold solely due to a business closure. Control: Mitsubishi Meldas Accessories: - Bar loader: IEMCA 432r - Fire extinguishing system Siemens Sinorix with fire protection damper - Chip conveyor - Flexible guide bushing JBS - Standard guide bushing unit - Discharge for long parts - High-pressure system - Fixed and driven tools Lasdpfx Agjw A Nv Hs Neh - Manuals and documentation - Guide bushings, collets - Various spare parts

Condition: like new (used), Year of construction: 2015, Hanwha CNC Swiss-type Lathe XD20V with Siemens Control, machine is in as-new condition, training machine with approximately 800 hours 840 D SL Year of manufacture: 2015 MAIN SPINDLE Maximum turning diameter: 20 mm Maximum spindle bore diameter: 24 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 4.3 C-axis with 0.001° resolution Z1 stroke [mm]: 210 Synchronous running guide bush unit Guide bush type: 22.001 / T223 Collet type: 145E / F25 SUB SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 3.7 Maximum pick-off diameter [mm]: 20 Max. part length ejecting forward [mm]: 80 C-axis with 0.001° resolution Z2 stroke [mm]: 210 Collet type: 145E / F25 TOOLING OPTIONS Tool slide X1, Y1: - Toolholder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling device: - Number: 5 driven drilling/milling spindles, modular - (Tools 2 x ER16 – 3 x ER11) - Power [kW]: 1.6 (S6000) - Front drilling unit for 4 drilling spindles, diameter 25 mm (omitted if B-axis is opted) Sub spindle cross slide - Number: 2 drill holder mounts, diameter 22 mm - Max. drilling depth 100 mm Backworking with Y2 axis - Tool carrier for 8 tools - 4 driven drilling/milling spindles ER16, modular - 4 stationary drilling/milling spindles ER16, modular WORKING AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 (3 with B-axis option) Rapid traverses m/min: 40 m/min (X1, Z1, Z2, Y1, X2, Y2) Connected load [KVA]: 15 ACCESSORIES Lasdpfx Agswzzabs Neh Leveling pads with leveling elements Toolbox and service tool set Work area light Signal tower (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8-liter lubrication oil capacity) Coolant flow monitoring Pneumatic blow-off unit for the pick-off collet chuck Manual and documentation in German and English (Including maintenance and operation manual, parameter list, and inspection protocol) CONTROL Control type: Siemens 840 D SL Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External control panel with handwheel 10.4" color LCD/MDI monitor Automatic PowerOff shutdown function Program check function (test run possible via handwheel) Continuous thread cutting cycle Run time display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface for bar feeder JBS interface Bar loader magazine: FMB Turbo

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, rotational speed (max.): 10,000 rpm, bar passage: 16 mm, No minimum price – guaranteed sale to the highest bid! Ledjwqgv Topfx Ag Neah Defective: X 2 amplifiers TECHNICAL DETAILS   Spindle speed: 10,000 rpm   Bar through-hole: 16 mm   Number of spindles: 2     Control: CNC control CINCON M6C   MACHINE DETAILS   Total weight: 1,750 kg   Total height: 2,200 mm   Required space length: 3,300 mm   Required space width: 1,500 mm   Connection voltage: 400 V   Mains frequency: 50 Hz   EQUIPMENT   - Driven tools  - Bar feeder - Siemens fire extinguisher - Tool breakage detector   - HSP drill holder Sale without bar loader

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST-32-BG-0093, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, overall weight: 3,900 kg, travel distance X-axis: 3,742 mm, travel distance Y-axis: 1,729 mm, travel distance Z-axis: 1,800 mm, TECHNICAL DETAILS Year of manufacture: 2011 CNC: Siemens MACHINE DETAILS Lodowwqztjpfx Ag Neah Model number: ST L32H Serial number: ST-32-BG-0093 Rated voltage: 3 phases, 220-240/380-415 V AC Rated frequency: 50/60 Hz Maximum spindle speed: 8,000 rpm Maximum machining diameter: 32 mm Dimensions: 1,964 mm x 1,290 mm x 1,800 mm Weight: 3,000 kg EQUIPMENT Bar feeder: FMB Turbo 3-36

Condition: excellent (used), Year of construction: 2017, operating hours: 2,138 h, functionality: fully functional, machine/vehicle number: 8107000122B, rotational speed (max.): 8,500 rpm, feed length X-axis: 70 mm, feed length Y-axis: 405 mm, feed length Z-axis: 100 mm, bar diameter (max.): 32 mm, No reserve price - guaranteed sale at the highest bid! New price: €215,000 TECHNICAL DETAILS CNC control type: Fanuc 32i-B Number of spindles (C-axes): 2 Number of axes: 5 Number of channels: 2 Main spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 15 min / S1): 51.9 / 40.4 Nm Power (S2 15 min / S1): 7.5 / 5.5 kW Counter spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 30 min / S1): 23.6 / 14 Nm Power (S2 30 min / S1): 3.7 / 2.2 kW Axis Data X1/Y1/Z1 Travel X1/Y1/Z1 (with rotary spindle): 70 / 405 / 100 (240) mm Maximum Speed X1/Y1/Z1: 40 / 30 / 40 m/min Maximum Acceleration X1/Y1/Z1: 5 m/s² Nominal Thrust (S1) X1/Y1/Z1: 2,200 / 4,400 / 2,200 N Axis Data X2 / Y2 / Z2 Travel X2 / Y2 / Z2: 300 / 135 / 200 mm Maximum Speed X2 / Y2 / Z2: 40 / 30 / 40 m/min Maximum Acceleration X2 / Y2 / Z2: 5 m/s² Nominal thrust (S1) X2 / Y2 / Z2: 2,200 N Toolholder data for slide 1 Number of fixed tools for internal machining: 4 + 4 Toolholder diameter: 25 mm Number of fixed tools for external machining: 6 Toolholder system: 16 x 16 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 7-9): max. 4,000 rpm Nominal torque (S3 40% / S1): 5.25 / 4.5 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Max. speed of driven tools (GEO 8-10): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data for slide 2 Number of fixed tools for internal machining: 4 Toolholder diameter: 25 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 8-9-10-11): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data for counter spindle slide Number of fixed tools for internal machining: 2 Toolholder diameter: 25 mm Lubrication system data Capacity: 1.8 L Operating pressure: 20 bar Downtime: 7 min Operating time: 30 s Lubricant: ENI EXIDIA HG 68 Pneumatic Unit Specifications Min. operating pressure: 5 bar Max. operating pressure: 6 bar Consumption of base machine: 180 NL/min Lsdov Stutspfx Ag Neah MACHINE DETAILS Dimensions: 2,309 x 1,448 x 2,087 mm Connected load: 16 kVA Weight: 3,450 kg Noise level: 75 dB(A) On-time: 3,743 h Spindle hours: 2,138 h EQUIPMENT - With 32 x 3000 mm bar feeder - Various channels for bar feeders - High-pressure system - Conversion kit for fixed lathe - Various collets, guide bushings, and tools

Condition: good (used), Year of construction: 2007, Manufacturer: STAR Laodpfx Agswnn N No Nsh Type: SR-10JC Year of manufacture: 2007 with: FANUC 18i-TB control, rear machining, synchronous spindle, powered tools, C-axis, bar feeder magazine FMB micromag

Condition: used, The Citizen M32 is a CNC lathe with a movable headstock that was designed for high-precision machining. The M32V model was current in 2008. Here are the most important technical data: Maximum bar diameter: 32 mm (optional 38 mm) Maximum machining length per clamping operation: 320 mm Maximum drilling diameter (front spindle): 12 mm Maximum threaded hole (front spindle): M12 (with cutting tap) Main spindle speed: up to 8,000 rpm Maximum clamping diameter (counter spindle): 32 mm (optional 38 mm) Maximum drilling diameter (counter spindle): 12 mm Maximum threaded hole (counter spindle): M12 (with cutting tap) Maximum workpiece length for the counter spindle: 145 mm Counter spindle speed: up to 8,000 rpm Number of tools: 25 to 27 Number of turning tools: 5 Number of driven tools: 5 to 7 Lsdpfx Asvz Twgog Neah Number of stations in the turret: 10 Tool sizes: Turning tools 16 mm square; Boring bar holders 25.4 mm diameter Dimensions (L × W × H): 2,860 × 1,465 × 1,900 mm Weight: 4,300 kg This machine is characterized by its high rigidity and precision, which makes it ideal for complex machining tasks. It has a powerful main and sub spindle and versatile tool configurations that enable efficient and flexible production.

Condition: good (used), Year of construction: 2010, turning length: 200 mm, spindle speed (max.): 15,000 rpm, turning diameter: 12 mm, spindle bore: 16 mm, travel distance X-axis: 122 mm, travel distance Y-axis: 122 mm, travel distance Z-axis: 200 mm, mount diameter: 12 mm, Citizen K12E-VII Year of 2010 Control: Mitsubishi Number of servo axes: 5 X1/Z1/Y1/X2/Z2 Number of C-axes: 2 main and counter spindles Number of driven tool stations: 8 (4 vertical holders / 4 back machining stations) LNS Tryton Hybrid loading magazine 7/12.7mm channel Laedowanc Tjpfx Ag Neh Vacuum extraction device Parts conveyor belt

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, number of slots in tool magazine: 19, TECHNICAL DETAILS Control: Fanuc, 18i-T series Ledpfovyrqpex Ag Nsah Axis configuration: 7 (X / Z / Y / C1 / X1 / Z1 / C2) Max. bar diameter: 20 mm Max. turning length: 205 mm Spindle data Main spindle speed: 10,000 rpm C-axis indexing: 0.001° Counter spindle accessories: collet Counter spindle speed: 8,000 rpm C-axis indexing: available Tool configuration Total number of tool holders: 19 pieces Construction: linear tool holder, front attachment, rear machining EQUIPMENT - Integrated extinguishing system from Kraft & Bauer - Chip conveyor and parts conveyor belt - Loading magazine FMB Turbo 3-26/3200 / A (built in 2001)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 010947, overall weight: 1,800 kg, controller manufacturer: FANUC, controller model: 16-T, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! Ljdjwx Ngkspfx Ag Neah TECHNICAL DETAILS Type: 530 G Control: FANUC Series 16-T Connected load: 5 kVA EQUIPMENT Chip conveyor available Bar feeder FMB Turbo 3-26 available

Condition: good (used), Year of construction: 2007, Manufacturer: STAR Type: SR-10JC Year of construction: 2007 with: FANUC 18i-TB control, backside machining, synchronous spindle, driven tools, C-axis, chip conveyor, oil mist extraction, bar feeder FMB micromag Laodpfx Agsvffble Neh

Condition: used, Year of construction: 2013, The Citizen Cincom M32 is a CNC lathe with a movable headstock designed for high-precision machining. In 2007, the M32V model was produced, which has the following main features: The special feature of this machine is the open storage Maximum turning diameter: 32 mm (optional 38 mm) Maximum turning length: 320 mm per clamping operation Maximum drill diameter (front): 12 mm Maximum thread size (front): M12 (with cutting tap) Main spindle speed: up to 8,000 rpm Rear spindle speed: up to 8,000 rpm Number of tools: maximum 25 to 27 Laedevz Azbopfx Ag Njh Dimensions (W x D x H): 2,860 x 1,465 x 1,900 mm Weight: 4,300 kg This model is equipped with a 10-station turret disk and offers a variety of tool configurations, including rotating tools for complex machining tasks. The machine is designed to ensure high precision and efficiency in production.

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,850 kg, Citizen C32-VIII Year 2007 LNS Express 332 Bar Feeder Lajdowanb Nepfx Ag Neh Chip Conveyor Parts Conveyor - Available Now -

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0127(009), turning length: 205 mm, spindle speed (max.): 12,000 rpm, turning diameter: 13 mm, drilling capacity: 8 mm, Equipment: documentation/manual, TECHNICAL DETAILS Control system: FANUC 16i-T Number of axes: 9 (X, C1, Y, E, B, A, X, C2) Machining range Max. bar diameter: 13 mm Max. turning length: 205 mm Main spindle Max. speed: 12,000 rpm Spindle power: 2.2 / 3.7 kW C-axis: yes Counter spindle Collet: available Max. speed: 12,000 rpm Spindle power: 2.2 / 3.7 kW C-axis: yes Tool equipment Tool holder: 4-way Cross drilling devices: 3 pieces Drilling capacity: 8 mm Turret: with 8 stations Speed of driven tools: 5,750 rpm Additional tool holders: various available Quills: available MACHINE DETAILS Connected load: 9 kVA Tank capacity: 170 l Lsdpfx Agsvuza As Nsah Coolant: oil Dimensions and weight Machine (L x W x H): 2,700 x 1,400 x 1,700 mm Weight of machine: approx. 1,700 kg Loading magazine (L x W x H): 4,300 x 600 x 1,800 mm Weight of loading magazine: approx. 700 kg Peripherals & accessories (L x W x H): 1,200 x 800 x 1,000 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - Manuals  - Machine operating tools - Tool holder - Loading magazine FMB Turbo 2-16 (Ø2 - Ø20 mm, length: 3,200 mm, variant "A") - Parts conveyor belt - Extinguishing system Kraft und Bauer - Manuals and operating tools for the machine

Condition: good (used), Year of construction: 2010, Manufacturer: STAR Type: SR-10JC Year of manufacture: 2007 with: FANUC 18i-TB control, backside machining, synchronous spindle, powered tools, C-axis, oil mist extraction, FMB micromag bar loading magazine Lodswnnzxspfx Ag Njah

Condition: good (used), Year of construction: 2006, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen M316-III CNC Swiss Lathe Year of manufacture: 2006 Control: Mitsubishi Meldas 635 Max. machining diameter: 16 mm C-axis: Main and sub-spindle 7 controllable servo axes: X1/Z1/Y1/X2/Z2/X3/Z3 4 driven tools on the vertical holder C-axis: Main and sub-spindle Laedpfxev Rhdme Ag Neh Includes accessories: LNS Express 220 loading magazine, 16 mm and 10 mm conversion kit Donaldson Torit extraction system - Available immediately -

Condition: good (used), Year of construction: 2004, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen C16-VII CNC Swiss Lathe Year of manufacture: 2004 Control: Mitsubishi Meldas 635 Max. machining diameter: 16 mm C-axis: Main and sub-spindle 5 controllable servo axes: X1/Z1/Y1/X2/Z3 4 driven tools on the vertical holder C-axis: Main and sub-spindle Includes accessories: LNS Express 220 loading magazine, 16 mm and 10 mm conversion kit Donaldson Torit extraction system Chip conveyor - Available immediately - Lodov Rhd Hopfx Ag Nsah