Used veneer presses for sale (143)

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Fodpoyxp Twefx Aanegi Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: like new (used), Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic cylinders Clearance: 410 mm Fjdpezxgx Usfx Aansgi Water heating system Safety shear pin

Condition: used, Technical specifications: Number of pistons: 4 Fsdpfx Aaezvmkxonogi Piston diameter: 80 Connection to central heating system Shelf dimensions: 1300x2500 mm Clearance: 400 mm Hydraulic clamping system Safety switch Engine power: 2 kW Power supply: 380 V Overall dimensions: Length: 2500 mm Width: 1300 mm Height: 2200 mm

Condition: excellent (used), Year of construction: 2013, We sell the Mambrane press for kitchen doors, doors, or door frames, etc. Producer ITALPRESSE, Spa Model: ESTREMA 14,5 - 28 Year 2013 Area 2800 x 1450mm. / 2 Table PIN system for edge binding. Magazine for foils in rolls included Fgodpfxez Ikxbj Aanoi Possible to see at work. Documentation included

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, plate length 3500mm Fsdpfxozxp Swo Aansgi plate width 1300mm solid steel plates oil heating with included heater 8 hydraulic pistons pistons diameter 85mm total pressure 160 tons safety line switch year 2002

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Brand: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before overhaul, functional tests & cleaning) Press specifically designed for manufacturing solid wood laminated panels using special adhesives. Fgodpfx Ajwxdctjanei SPECIFICATIONS: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (usable stroke): 200 mm Maximum vertical platen pressure: 80 tons (2.5 kg/cm²) Maximum vertical pressure of front cylinders: 40 tons (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Horizontal pressure: 7.5 tons (7 to 10 kg/cm²) CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50x1.40m with rack-and-pinion pusher - Hydraulic power units 3x 2 HP - Control panel with 2 foot pedals; adjustment for feed/horizontal & vertical working pressure/working temperature/pressing time Pressure gauges for: platen pressure, pusher stop, and locking presser - Mobile lower platen with aluminum surfaces 6 hydraulic cylinders Ø70mm with 4 rack-and-pinion balancing guides - Heated upper/lower circuits (internal coil) 24kW electric boiler with 1.1kW circulation pump - Independent rear locking presser with 3 hydraulic cylinders Ø70mm, double rack guides - Lateral pressers 5 hydraulic cylinders Ø40mm Adjustable feet 70x120mm (height adjustable) - Outfeed roller table length 1.25m - Complete electrical cabinet with all controls - Power supply: 400V, three-phase 50Hz, IN 44A Installed power: 32kW - CE marking Lockable main switch, emergency stop button Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50x2.40xh.2.00m + 2.40x1.80xh.1.80m (as delivered, packed) Weight: 6200kg + tables

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric heating plate bottom: defective plate surface: ALU - anodized pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm Fsdpfxox Edl Es Aansgi machine width: 1500mm weight: 4000kg

Condition: used, Year of construction: 1978, used good condition cleaned functionality tested Manufacturer: Bürkle Type: U 88 Year of manufacture: 1978 Machine no.: 3102629 Safety tested (GS certified) Touch control Safety cable on top Electric heating Specific maximum pressing force: 80 t Aluminum plates glued Lower piston Quantity: 6 Plate size approx. mm: 2550 x 1300 Opening width approx. mm: 400 Piston diameter: 70 Space requirement approx. L x W x H approx. mm: 3100 x 1500 x 1900 Weight approx. kg: 4000 Fgsdpozkl Ifsfx Aanji Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 1986, with Elkom heating plates, gold anodized, incl. separate control cabinet stepless adjustment of the opening height used cleaned function tested Manufacturer: Joos Type: HP 90 Fedpfe Ahr A Djx Aanegi Year of manufacture: 1986 Machine no.: 13182 Tip control Swivel console Safety cable at the bottom Lateral guidance Heating: electric Aluminum plates glued Lower piston Quantity: 4 Plate size approx. mm: 2500 x 1350 Opening width approx. mm: 420 Piston diameter: 90 Space requirement approx. L x W x H approx. mm: 3000 x 1600 x 2100 Weight approx. kg: 3500 Location: 97447 Gerolzhofen, free loading, unpacked Handover in its current condition as inspected, without warranty

Condition: new, Year of construction: 2026, Orma NPC/DIGIT 31/16 2V - Exhibition model - available for immediate delivery Drilled solid steel plates 3100 x 1600 mm No. 1 intermediate plate, No. 2 working table Movable lower plate No. 8 hydraulic cylinder, diameter 85 mm Cylinder stroke and press opening 450 mm Total pressing force 160 t Digital control system 45 kW electric boiler for thermal oil heating Electric shut-off for a pair of cylinders Misalignment protection PRICE LIST 2026 € 72,250.00 Location: ex works Fsdpfs Afau Hsx Aanjgi - available for immediate, short-term delivery - Subject to prior sale

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Fjdpfx Aaezuzw Dsnogi Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1993, pressing area: 3000mm x 1900mm pressing units vertical: 3 pressing units horizontal: 2 pressing system: elctro - hydraulic Fsdpfx Aey A Hkzoanogi machine length: 3500mm machine width: 1000mm machine height: 2600mm waight: ca. 900kg

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires Fgodpfxsdx R Tfs Aanei - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: used, Technical data: Number of pistons: 6 Piston diameter: 80 mm Connection to central heating (CO) Shelf dimensions: 3000x1300 mm Clearance: 395 mm Hydraulic pressing 6 pneumatic side clamps Safety switch Motor power: 1.5 kW Fsdjyz T Anopfx Aanegi Power supply: 400 V Overall dimensions: Length: 3650 mm Width: 2100 mm Height: 2040 mm

Condition: excellent (used), functionality: fully functional, - Shelf length: 3000mm - Shelf width: 1300mm - Clearance: 340mm - Number of pistons: 6 - Piston diameter: 80mm - Oil heating - Hydraulic side pressure - Emergency stop – pull cord Fgedsz Nc Siopfx Aanji

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Shelf length: 3100 mm Shelf width: 1300 mm Clearance between shelves: 44 cm Number of pistons: 6 Hydraulic heating Safety cut-out with shear pin Year: 2015 Capacity: 5000 kg Fodpfjztcuzex Aanegi Power: 4 kW CE marking

Condition: new, Year of construction: 2026, NPC/DIGIT 6/95 Fjdpfxe Afat Ns Aansgi Serpentine heating plates, 3000 x 1300 mm Movable lower plate No. 6 hydraulic cylinders, diameter 70 mm Cylinder stroke and press opening 400 mm Total pressing force 90 tons Digital control Electric boiler, 18 kW, for thermal oil heating Location: ex works - available for immediate delivery -

Condition: used, Technical specifications: Number of pistons: 4 Piston diameter: 60 mm Shelf dimensions: 1000x2500 mm Clearance: 480 mm Hydraulic clamping system Fedpezh U N Hofx Aanegi Safety switch Motor power: 1 kW Power supply: 400 V Overall dimensions: Length: 2800 mm Width: 1220 mm Height: 1980 mm

Condition: excellent (used), Year of construction: 1999, Pressing area: 2500 x 1300 mm Opening width: 400 mm Number of press cylinders: 6 Total pressing force: 90 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load approx.: 20.0 kW Space requirement (L x W x H) approx.: 3000 x 1500 x 1950 mm Weight: approx. 3800 kg Hydraulic heating plate press, with lower plunger design BUSSE electric heating plates, gold anodized, lower plate NEW Digital temperature display and control for heating plates Pressing pressure can be continuously adjusted by means of a pressure switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Central control panel at the front Rack and pinion compensation for uniform closing Fgedsz Ua R Uspfx Aanji Safety release cord Main switch, lockable Opening automation Stroke limitation Lateral table extension with roller, extendable CE Note regarding used machines: • Errors in technical specifications and prior sale reserved. • Stated prices are ex-works prices – free loading! • The machine has been cleaned and functionally tested. • All machines are sold as is, as viewed, without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: used, Technical specifications: Number of pistons: 2 Piston diameter: 80 mm Connection to central heating system Shelf dimensions: 1000x2500 mm Clearance: 440 mm Hydraulic pressure: ~2kg/cm2 Emergency stop switch Motor power: 2 kW Fgodoymyc Dspfx Aansi Power supply: 380 V Overall dimensions: Length: 3400 mm Width: 1400 mm Height: 1850 mm

Condition: refurbished (used), functionality: fully functional, Refurbished, four-piston hydraulic platen press of Italian manufacture. Branded veneer press for easy veneering of wood. Dimensions of veneer sheets: 2500 x 1300 mm Pressure at full area: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic pistons: 4 MYLAR Teflon film on the platens Preparation for heating the platens with water Option to install a hot water boiler Price: 6,630 EUR excluding VAT The condition after refurbishment and the machine's readiness for delivery must be verified in advance! Fedpfxjyi U Rne Aanogi In stock in Telnice near Brno, Czech Republic. Testing, demonstration of the machine, and operator training are standard services.

Condition: excellent (used), functionality: fully functional, Shelf length: 2200 mm Shelf width: 1000 mm 2 hydraulic cylinders Clearance: 510 mm Cold press, no heating Pump motor power: 1.1 kW Fgodpfxoz D Ewqe Aanoi

Condition: good (used), Code: 0478 Brand: ITALPRESSE Fgsdpfozz Szaex Aanei Model: V/2 Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Condition: excellent (used), functionality: fully functional, Shelf length 2500 mm Fgodpfxjz D Aflo Aanoi Shelf width 1200 mm 4 hydraulic pistons 75 mm Clearance 400 mm Water heating

Condition: excellent (used), functionality: fully functional, Shelf length 3500 mm Fgedpfx Aaezyaipenei Shelf width 1300 mm New aluminium shelves 6 hydraulic cylinders Piston diameter 70 mm Water heating Ground clearance 390 mm Safety rupture link Year 1999 Weight 4400 kg