Condition: excellent (used), Year of construction: 2020, Altendorf - Hebrock K36 edge bander with Airtronic, jointing, corner rounding, and two scrapers. Top-of-the-line features with multi-radius, nesting, and spraying devices, virtually fully equipped. Touchscreen interface with PLC control for easy machine operation. The machine can be quickly switched between the glue pot and Airtronic. Cgeb Hev Nwahoc Shbjt The machine has the Airtronic option, but can also be operated with the standard glue pot without restrictions. Edge thickness roller approx. 0.5 - 3 mm Workpiece height approx. 8 - 60 mm Feed rate approx. 7 - 10 m/min (automatic reduction with corner rounding machine and Airtronik) Noise protection hood Extendable workpiece support Extraction connection 80 + 140 mm Units: Release agent spray device, top and bottom Quick-change tank with glue outlet Airtronik air heater unit up to 40 mm Top pressure, electric motor adjustment Infeed guide, manual adjustment with SIKO counter Edge thickness, manual adjustment with SIKO counter Jointing with Leitz Whispercut diaphragm cutters Gluing unit with automatic edge feed for roll material up to 3 mm Pressure zone with 4 rollers Antistatic coolant spray device, top and bottom Crosscut saw, integrated collection container for Edge trimming units Protective spraying device for sensitive edges Multi-radius milling unit with multi-tool diaphragm cutter, with pneumatic 3-point adjustment between R1, R2, and bevel Corner rounding unit R2, pneumatically adjustable between thin and thick edges The profile rounding unit can also be used with the shelf program, so only the straight edge is rounded and not the corners Multi-radius scraper R1 / R2, pneumatically switchable and retractable Cleaning agent spraying device, top and bottom Glue joint scraper, pneumatically retractable Buffing station, cleaning station Hood lock CE mark Operating instructions A video of the machine in operation can be sent upon request. All indexable inserts of the milling units and scrapers have been replaced or turned, the saws and diaphragm cutters (Whispercut) have been sharpened, and the buffing wheels have been replaced. The machine is therefore ready for immediate use. Only the diaphragm cutters of the radius cutter and corner rounder have not been replaced, but they are still sharp. Original paint, only minor paint damage has been repaired. The machine has approximately 5,400 operating hours (glue pot switched on), but the frequency converters for the milling units and cross-cut saw have only been switched on for approximately 3,800 operating hours. Machine dimensions approx. 5,550 x 1,200 x 1,450 mm (LxWxH), including edge plate. Weight approx. 1,700 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse ready for demonstration; see "Other offers from this supplier."

Condition: excellent (used), Year of construction: 2011, operating hours: 1,350 h, Gross Gaz 62 V-rotor Year of manufacture 2011 Operating hours: 1350 18.5 kW drive motor Hydraulic moving floor Sieve 15/20mm PLC control Cgjb Hc Sjvl Ht Ajhbot New counter blade Blade changed to sharp corner Machine is ready for use immediately!!!!

Condition: used, Year of construction: 2022, Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feed min: 12 m/min Feedrate max: 18 m/min Continuously variable feed: Yes Glue system granulate: glue pot above feeding chain Quick-change glue pot: Yes SCM Glue system SGP Smart Glue Pot: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Cgsb Hc Sov Exkyehbst Aggregates actuated by control: pneumatic Type: left-side machine Infeed barrier: Yes Control: SCM STARTOUCH Conformity marking: CE mark Weight: 1.797 kg

Condition: good (used), Functionality: fully functional, Machine type: Lathe Manufacturer: KEILWERTH Condition: good Offer type: used machine Cgsb Hjthfifec Shbst Technical Data: Working size: center height 160 mm largest diameter 320 mm Drive: 0.85 kW 400 V Remark: Genuine German workmanship! Very stable and heavy design! Röhm four-jaw chuck Ø 125 mm, max. working length 800 mm, 4 speeds, various accessories, Spare V-belt in headstock, spindle bore 33 mm Weight: 150 kg The machine is in good condition and ready for immediate use and can be inspected and demonstrated at our premises. We would be pleased if you are interested in our offer. Errors, changes and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 17,416 h, Functionality: fully functional, machine/vehicle number: 1601, Equipment: safety light barrier, RUF 600 briquette press used, ready for use Cgjbswfnlxj Hc Shbst Control: Siemens S7 Briquette format: standard Performance (hardwood chips): approx. 8 seconds per piece! The machine is in use and can be inspected under operating conditions.

Condition: excellent (used), Functionality: fully functional, In this offer you purchase a ‘Felder RL200’ cleanroom extraction system as good as new Object of sale: 1 x Felder RL200 year of construction 2023 Cgob Hc Sewcklijhbot Condition: This offer is for a used extraction unit, which may show signs of use (minor scratches or yellowing). The device has been tested for function The device is little used Year of manufacture 2023 Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping possible on request! For further information, you can of course also contact us personally.

Condition: new, Year of construction: 2024, WEIMA WL.4. Shredder Antrieb: 18.5 kw Baujahr:2023. Cgsb Hohyxfkjc Shbot

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,800 h, Briquetting machine model A6 Plus Motor: 7,5 kW Installed power: 7.5 kW Voltage 380 V Drum size Ø 1000 mm h 920 mm Maximum material volume in the drum 0.80 m³ Cgob Hc Shjumxkxsbjt Maximum material weight in the drum 300 kg Pump 26 cm³ 1000 g/min Unit 2 Tank capacity 110 l Maximum operating pressure 1.5 MPa (150 bar) Briquette diameter: 60 mm Maximum briquette length per single stroke: 50 mm Production. 60/100 kg/h ("this value may vary depending on the characteristics of the material") General dimensions. Front, width, height 1650 mm 1110 mm 1410 mm (*moving side of the machine) Net weight. 750 kg New seal set in the hydraulic pump

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: flange ring -Inside: Ø 257 mm -Flange: bolt circle Ø 285 x 6 mm -Number: 34x flange ring available -Price: per piece / minimum order 2 pieces -Dimensions: Ø 307 x 4 mm -Weight: 0.7 kg/piece Cgjb Howb Sc Toc Shbst

Condition: ready for operation (used), Year of construction: 1998, Table: 520 X 420 mm, Speeds: 4000/6000/7500 rpm, Drive: 1.8 KW, Cgjb Hc Shsfu Il Ujbjt Remark:, with additional horizontal sawing unit (1.5 kW) for, Two-sided machining with roller conveyor and, lateral material guide, everything can be easily dismantled, Weight: 150 kg

Condition: used, Year of construction: 2017, Working dimension X: 3.000 mm Working dimension Y: 1.550 mm Working dimension Z: 250 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool changer positions: 28 Linear tool changer: Yes Disc tool changer 18-fold: Yes Pickup change place: Yes Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Cgob Hov Ezk Nsc Shbet Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 6 Pneumatic pipe connectors: an den Konsolen Vacuum pump: Yes Safety device: Safety mat Chip conveyor: Yes Interface for .dxf data: Yes Automatic lubrication: Yes Chip deflector: Yes Control: PC control Software: FORMAT 4 WOOD FLASH, MICROSOFT WINDOWS 7 Total connection: 19 kW

Condition: used, Year of construction: 2010, CNC Intorex TMC 3000 Maschining centre 8 (9) axis -Max. working lenghts 3000mm -Max working square 220x220mm -Max. working diameter 450mm (when wood round) -Stroke axis X 3800mm Cgob Hc Sjunk Rmohbot -Stroke axis Y 460mm (plus 230, minus 230) -Stroke axis Z 510mm -Stroke axis Y2 360mm (turning) -Stroke axis Y3 360mm (milling) -Stroke axis Y4 360mm (sanding) -Stroke axis B (rotary +/- 90°) Power: -Axis A (rotary main motor) 22,2 kw 0-1500 upm -Axis Y2 11kw 1000-4500 upm -Axis Y3 11kw 1000-6000 upm -Axis Y4 2,2 kw 3000 upm max. 24.000 upm -Electrospindle (HSC) 12 kw max. 24.000 upm - Toolchanger 6 positions HSK 63 F - Total installed power 70 kw - Weight approxm. 9,5 tons

Condition: new, Year of construction: 2025, WEIMA shredder/shredder for shredding many types of wood waste such as production waste, waste wood, etc. Type:WL 4 Drive:18,5kW. Cgeb Hjqgcrroc Shbot Rotor width: 600mm with second row of knives (28 pcs.) 40x40 mm concave complete with connected switch cabinet (with 5m cable) with logspacer hopper opening (600 x 1050 mm) Weight: 1300 kg

Condition: good (used), Four-shaft chipper UNTHA RS30 4S Blades in very good condition, can be re-sharpened on request Drive power: 2 x 7.5 kW Operating voltage: 400 V; 50 Hz Funnel opening - Cutter opening: : 510 x 560 mm Number of cutting shafts: 4 Main shaft rotation: approx. 23 rpm / 4,600 Nm Side shaft rotation: approx. 35 rpm / 3,100 Nm Perforated sieve Ø: 30 Chopping performance with sieve hole diameter: 15-20 mm: 350-550 kg/h 25-30 mm: 550-850 kg/h Cob Hcovxkd Ej Shbogt 35-40 mm: 850-1250 kg/h without sieve over 1250 kg/h Suction nozzle 200 mm Filling funnel: 550x660 mm Overall dimensions: length x width x height: 1,300 x 900 x 1,970 mm Weight: approx. 1,300 kg

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 226/0-206, Max. cutting length 4,300 mm, Max. cutting height (vertical) 2,100 mm, Cjbswgm Ihs Hc Shbjgt Max. cutting height (horizontal) 2,010 mm, Max. cutting depth 60 mm Motor 4 kW Max. circular saw blade diameter = 250 mm, Extraction nozzle diameter = 120 + 100 mm Max. installation dimensions 5,080 x 2,780 x 1,600 mm, Support rails have been replaced! --- Excluding transport and assembly of the machine --- Ex works in Seevetal, as seen, Subject to prior sale

Condition: like new (used), Year of construction: 2022, operating hours: 942 h, Functionality: fully functional, Ecokraft pelletizing line doubler for pelletizing a multitude of raw materials (wood, hay, straw, etc.) Composition: - 1 elevator to convey the raw material to the crusher - 1 crusher with a 45 kW soundproof cabin - 1 dust collector - 1 6 m³ hopper to receive the crushed material and send it to the presses Cjb Hc Sjwc Tyiohbogt - 1 dosing system to add a binder to the pellets - 2 18 kW pellet presses with automatic lubrication and water dosing pumps - 2 screening systems - Big bags with supports to collect the material under the screens - Cooling big bags with supports to collect the pellets Spare parts and maintenance products included: - 10 knives for the crusher - 18 kg of pneumatic Pressol lubrication Machine year: 2022 and 2023 Output: between 300 and 500 kg/h depending on the material Press A is at 942 hours, Press B 925 hours

Condition: used, Year of construction: 2022, Working dimension X: 3.300 mm Working dimension Y: 1.250 mm Working dimension Z: 150 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 12 Vertical drilling spindles: 18 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in Y-direction, in X-direction Gantry machine: einseitig angetrieben Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 6 Positioning aid: Yes Laser projector: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Cgob Hc Sswg Smvshbjt Capacity vacuum pump: 90 m³/h Safety device: Bumper Pendulum machining: Yes Interface for .dxf data: Yes Automatic central lubrication: Yes Control: FORMAT 4 F4 INTEGRATE Handheld terminal: Yes Software: FORMAT 4 F4 OPERATE, FORMAT 4 F4 TOOLBOX, FORMAT 4 F4 CREATE, PC office licence Conformity marking: CE mark, UKCA-Zeichen Total connection: 18 kW

Condition: excellent (used), Year of construction: 1999, Mobil Jet Year of manufacture 1999 2.2 kW Intake manifold 120 mm Cjb Hc Shjwdvr Dsbjgt

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Ceb Howgwmnjc Shbsgt Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: used, Year of construction: 2020, Flow rate: 6.920 m³/h Intake socket: 350 mm Filter surface: 71 m² Cgjb Hc Sswg Smpjhbst Underpressure: 2.630 Pa Main motor power: 11 kW Frequenzgesteuert: Yes Machine recognition: Yes Automatic blast gate: Yes Star feeder: Yes Extinguishing automatic: Yes Air system: Underpressure Automatic cleaning: Jet- cleaning Category of filter material: H3 Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 1.060 kg Space requirement Length: 2,6 m Space requirement Width: 1,1 m Space requirement Height: 3,1 m

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Cgsb Hcjwgwmhj Shbst Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: used, Year of construction: 2005, Cutting length: 3.200 mm Pusher stroke: 2.850 mm Cgsb Hc Shjv U Elpjbst Number of grippers: 5 Feedrate max: 80 m/min Continuously variable feed: Yes Saw blade projection: 82 mm Saw blade diameter max: 300 mm Main motor power: 11 kW Scoring saw: Adjustable from outside Groove cutting function: Yes Stop side: Left Single sided side-aligner: Yes Control: PANHANS EL 5 Software: PANHANS PIOS PROFESSIONAL Conformity marking: CE mark

Year of construction: 2003, Condition: used, System 68 IV Number of tools 29 St. Bore 50 mm Gold Window Tools IV68 Wood and Wood-Aluminum as well as IV 68 Wood Front Doors Used on a Weinig Unicontrol 6. Cjbowgwmbe Hc Shbogt Complete drawings available, see PDF. (For your information, the drawings also list the molding tools that were used on a Weinig Unimat. These are NOT included in the scope of delivery.) (Technical specifications and drawings according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2016, Edgeband thickness max: 3 mm Panel thickness max: 40 mm Thickness of coiled edgeband max: 3 mm Workpiece width min: 70 mm Feedrate max: 10 m/min Glue system granulate: glue pot above feeding chain Cgeb Hc Shsvbcnnsbet Quick-change glue pot: Yes Suitable for PUR glue: Yes Spraying device: Yes Premilling unit: Yes Trimming saw: 1 motor Flush/radius/chamfer milling units: 1 Nutfräsaggregat: Nutfräsaggregat starr Scraper unit: Flat scraper Aggregates actuated by control: pneumatic Free spaces for aggregates: 2 Type: right-side machine Machine length: 5.000 mm Control: SPS Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 12,7 kW Weight: 1.900 kg

Condition: used, cut-off saw 3 KW Spindle diameter 50 mm Spindle length 300 mm Number of tools variabel St. Control CNC Dimensions (L/W/H) 2500x1700x2100 mm weight 1700 kg HABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Positioned at the Top Three-Phase Motor 3 KW Spindle Diameter 30 mm Speed ??2800 rpm Saw Blade Diameter 400 mm * Automatic Brake with Speed ??Monitoring * Stepless Saw Positioning with Siko Display * Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle 2 Slotting Spindles 50 mm Diameter ----- Power 2 x 7.5 KW Speed ??4200 rpm Spindle Diameter 50 mm Max. Tool Diameter Approx. 360 mm Usable Length 300 mm * Both slotting spindles can be positioned via ball screw * Freely programmable 19 programs, display with function keys * Protective and extraction hood with 180 mm diameter extraction nozzle * Automatic brake with speed monitoring Studio table ----- * Swivel range +/- 65° * Automatically changing counter wood (programmable) * Pneumatic clamp * High-precision electrical degree indicator Csbowgwlks Hc Shbjgt * Automatic length compensation * Counter wood at any angle setting in the cutting plane Special features ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length 2500 mm Extraction nozzle diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine upon request! ----- Images show the same model. Original images not yet available. (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT.