Condition: excellent (used), Year of construction: 1980, REX Tenoning and Slotting Machine Type: ZS-400, Year 1980 Machine No. 18.943 Very good condition 380 Volt / 50 Hz Cgsbvswctu Hshwukst Saw unit Mill unit Sliding table Length stop Holder Location: From stock, 54634 Bitburg - Available immediately -

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: Fabr.Nr.019483, The motor is new! A started roll of filter fleece is available. Schuko - paint mist spray wall type Super-Max Cgobvhwuev Dvc Reket Factory no. 019483 Year of manufacture: 2005 Motor data: 380 V - 50 Hz - 2 kw- 9.6 A Nominal volume flow: 5500 m3/h at 920 PA Impact surface 3.2 m2 Connector: 300 mm Extraction surface: W/H approx. 2000/1600 mm Weight approx. 200 kg Device dimensions; L/W/H approx. 2650/800/1860mm

Condition: ready for operation (used), working width: 2,800 mm, Glue spreader Manufactured by Friz Working width 2800 mm Cebvhwewganzoukjgt 2 rubberized, grooved applicator rollers, re-grooved once 2 chrome-plated metering rollers Adjustment via handwheel Applicator rollers still in good working condition. The machine will be cleaned and functionally tested upon order.

Condition: like new (used), Year of construction: 1999, Functionality: fully functional, input voltage: 400 V, frequency: 50 Hz, LITTLE BUFFER TABLE Cgebvhwewcp Ehsukst PERFECT CONDITION (Can be converted for other side) Option Conveyor belt 4m

Condition: used, Year of construction: 2018, Saw blade diameter: 550 mm Main motor power: 2,2 kW Saw blades tiltable: Yes Pneumatic clamping: Yes Control: Positioning control Type: Cut from back to front Width adjustment: electro-motive Conformity marking: CE mark Weight: 1.254 kg Cebvev Ua Ixohwukegt

Condition: used, Functionality: fully functional, Roller conveyors for the furniture industry Manufacturer: WTT Fördertechnik GmbH, Type 121 750 complete roller conveyors, each 3 m long Total: 2300 linear meters Roller conveyor length L = 3000 mm Installation length EL = 500 mm Support roller pitch T = 200 mm Roller conveyor height H = 280 mm, adjustable +/- 25 mm Number of FA feet = 1 per linear meter Cobvhsv I Rl Uewukegt Consist of: 1. Side panels, each 3000 mm long, made of 20/80/40/3 mm profiles, with a 25 mm pitch, holes suitable for a 12 mm diameter axle, stove-enamelled in RAL 6011 green. Weight per piece (per side) - 8.15 kg 2. Insertable support rollers Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness, Axle - 12 mm spring axle, Bearing - steel insert with reinforced, pressed special ball bearings. Surface of the support rollers: bright steel. Installation length EL = 500 mm Weight - 2.40 kg / piece 3. Screw-on bridge support feet in a sturdy welded construction made of special profile with a crossbeam, height adjustable by +/- 25 mm via an M16 threaded spindle with a screw slot. With floor mounting plates and dowel hole. Stove-enamelled in RAL 3000 red. Weight - 2.5 kg. 23 transverse transfer carriages are also available: Support rollers 4.5.80.1.12.1.2.08.0 made of precision steel tubing Diameter 80 x 2.0 mm wall thickness, axle diameter 12 mm Wheel set consisting of 4 precision ball-bearing flanged rollers, diameter 125 mm Roller conveyor length L = 2,500 mm Track gauge SpW = 2,010 mm Installation length EL = 500 mm Support roller pitch T = 200 mm Roller conveyor height H = 280 mm (Subject to changes and errors in the technical data and subject to prior sale)

Condition: excellent (used), Year of construction: 2011, Radial fan, chip extraction blower, fan, extraction, chip blower, top condition - Steel impeller - Motor power: 11 kW with star-delta starter - Speed: 2930 rpm - Flow rate: 4296 m³/h - Inlet connection: Ø 250 mm - Outlet connection: Ø 250 mm - Motor: 400 volts - Design: GL 360/5 - Year of manufacture: 7/2011 - Negative pressure: Pa: 4419 - Motor: A: 22 - Motor: Hz: 50 - Sound pressure level: dB(A): 80 - Weight: 245 kg Cgsbvhwuewcttijkot Location: ex warehouse, 54634 Bitburg - Available immediately -

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Spänex stationary extraction system Manufacturer: Spänex Csbvhwswdxk Nsukegt Year of manufacture: 2016 Operating voltage: 3x400V+N+PE 50Hz Control voltage: 230V AC/24V DC Power rating: approx. 52kW Motor: 50 kW Air volume: 35,000m³/h Vacuum system with degassing lock with control unit

Condition: good (used), Year of construction: 2017, BIESSE STREAM B1/10.5 Single-sided edgebander PRS EVO 3.2 panel return system Stream B is a single sided edgebander that meets the needs of large companies for high productivity. It can cover three work shifts, 7 days a week, and has an endless number of possibilities for product customisation based on production requirements. Description; Brand: Biesse Type: Stream B1 Year of manufacture: 2017 Machine number: 15045 + 15046 Glue system: PU (PURBlue 4) Nitrogen tank for PU glueing head Airforce hotair system Edge band dimensions: 04 - 20 mm Units controlled: Yes Pre-milling unit: Yes Saw unit: Yes Milling unit: Yes Corner rounding unit: Yes Radius scraper unit: Yes Flat scraper unit: Yes Cebvhwuenacxyskegt Cleaning unit: Yes Other remarks: including PRS system EVO Full description will be forwarded on request (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, working width: 3,500 mm, height adjustment type: hydraulic, power: 1.5 kW (2.04 HP), workpiece height (max.): 2,350 mm, WINDOW PRESS S+S Csbvhowcmp Rewuksgt PERFECT CONDITION HEIGHT 2350 x WIDTH 3500mm Dutch manual Available from May 2025

Condition: used, Year of construction: 2019, Working dimension X: 6.000 mm Working dimension Z: 125 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Cgjbvhwjv D T Dxouket Tool clamping system: HSK-F63 Tool changer positions: 13 Disc tool changer 8-fold: Yes Linear tool changer: Yes Tool changing auxiliary device: Yes Vertical drilling spindles: 21 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable Gantry machine: Yes Machine table: Pod and rail table Number of consoles: 12 4-field processing: Yes Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 126 m³/h Safety device: Safety mat Barcode control: Yes Three stop ranges: Yes HOMAG Lateral stop system PURE STOP: Yes Automatic central lubrication: Yes HOMAG ecoPlus: Yes Hand-controlled machine: Yes Control: Homag powerTouch, HOMAG POWER CONTROL PC 86 HOMAG - Uninterruptible power supply: Yes Conformity marking: CE mark

Condition: used, Year of construction: 1992, Functionality: limited functionality, machine/vehicle number: 9205151, The grinder is ready for use and features additional dust extraction. Cebvswdt A Hjhwukogt Control cabinet included. Can be used as a spare parts supplier for motors, controls, switches, rollers, etc.

Condition: used, Year of construction: 2010, Functionality: fully functional, heating capacity: 600 kW (815.77 HP), total height: 3,400 mm, total length: 4,500 mm, total width: 3,000 mm, control cabinet width: 400 mm, control cabinet length: 1,000 mm, control cabinet height: 2,000 mm, Equipment: hot water, Endress moving grate combustion system with automatic discharge with automatic ash removal with automatic ignition available from August 2025 Cgobvhev N Hxgjwuket Can be inspected during operation

Condition: good (used), Year of construction: 2011, machine/vehicle number: 0-200-23-3741, The machine has been in use so far and has produced good results. Cgsbvhweumngvoukjt

Condition: new, Year of construction: 2025, Functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Cgobvhowf Hdgswukst Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: like new (used), Year of construction: 2016, operating hours: 650 h, Functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 60 mm, compressed air connection: 7 bar, EDGE BANDER BRANDT (HOMAG) HIGHFLEX 1220 FULL OPTION PERFECT CONDITION ONLY 650 H PREFILLER L+R ROTATING 2 GLUE TRAYS (WHITE/TRANSPARENT) VARIOUS SCRAPERS Dutch manual Immediately available (demo is ready) Cobewcma Novhwukjgt

Condition: used, Year of construction: 2022, Sanding width: 1.100 mm Workpiece thickness min: 3 mm Passage height max: 170 mm Cebvev D T Aujhwuksgt Sanding aggregates total: 2 Sanding rollers: 1 Hardness grade of roller in ° shore: 85 Sanding pads total: 1 Segmental pressure pad: electronic Segment width: 25 mm Lacquer sanding: Yes Vacuum table: Yes Main motor power: 15 kW Sanding belt length: 1.900 mm Belt speed max: 19 m/s Adjustable sanding belt speed: continuously variable Feedrate max: 18 m/min Continuously variable feed: Yes Blow-off device: Sanding belt Jump-in control: electropneumatically Aggregates with frequency inverters: 1 Configuration of aggregates: r-p Jump-in control: Yes Control: Touchscreen Conformity marking: CE mark Weight: 1.150 kg

Condition: used, Lightweight edge sander Jet type EHVS-80 cs for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2260 mm Sanding belt width: 150 mm table: Pivotable engine power: 1,5 kW Cgjbewffpbevhwuket Suction nozzle: 100 mm

Condition: reconditioned (used), Year of construction: 1998, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min Cobvhwuslatv Aokegt - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, overall weight: 16,000 kg, feed rate X-axis: 110 m/min, spindle speed (max.): 24,000 rpm, tool diameter: 330 mm, total length: 290 mm, workpiece length (max.): 4,500 mm, Equipment: rotational speed infinitely variable, CONTUREX 2 WEINIG 114 max. workpiece length 4500 mm milling spindle 2 pieces main motor 20 kW Dimensions 16000 x 6500 mm Weinig Conturex 2 / 114 ----- Cebvowclgbohwukogt Working width: 40-260 mm Working height: 25-115 mm 2 x PowerGrip pliers table 2 x 2280 mm ----- Free length without repositioning cycle and 90 degree machining 175-2700 mm Workpiece length with repositioning cycle 2700 - 3500 mm Workpiece length with multiple repositioning cycles 3500 - 4500 mm Main spindle 1: ----- Motor with brake 20 kW S1/ 30 kW S 6 HSK-63F Speed electronically adjustable 0-18,000 rpm Max. tool length from flat support HSK 63 F: 280 mm tool magazine: ----- Number of places: 30 Distance between seats: 100 mm Weight per seat 10 kg Total weight in magazine: 240 kg Main spindle 2: ----- Motor with brake 10kW S1/ 12kW S 6 HSK-63F Speed electronically adjustable 0-24,000 C-axis tool magazine: ----- Number of places: 24 mm Distance between seats: 100 mm Weight per seat 5 kg MEASUREMENT OF PART LENGTH/WIDTH/THICKNESS EXTENDED TABLE OUTPUT INPUT CARTS (3 pcs.) BARCODE SCANNER Option tools LEITZ (new) ----- Wood: IV 68 and 92 Lifting sliding doors IV68 and 92 front doors IV 68 and 92 Corner connection: pin/slot, plug-tec wing and doors plug/tec & counter/dowel Software: Kosmosoft (Archimedes)

Condition: used, knife: Centrolock reversible blade Z2 flight circle (ø): 93 mm admission: PowerLock HSK length: 240 mm material: steel Cjbswffm Hjvhwukegt

Condition: like new (used), Functionality: fully functional, planing height: 130 mm, planing width: 230 mm, rotational speed (max.): 6,000 rpm, planer shaft diameter: 125 mm, motor voltage: 380 V, compressed air connection: 7 bar, type of input current: three-phase, table length: 2,500 mm, shaft diameter: 40 mm, number of spindles: 5, frequency: 50 Hz, FOUR-SIDED PLANER UNIMAT 500 Cobvowchbzshwuksgt PERFECT CONDITION, FEW HOURS 5 AXES / 3 AXES CONTROLLED Available from May/June (still in demo)

Condition: used, knife: WP Z4 V4 flight circle (ø): 160 mm Cjbvhwewffk Eoukjgt drilling: 40 mm length: 8-15 mm material: steel Labelling: BG test

Condition: like new (used), Year of construction: 2014, Functionality: fully functional, saw blade diameter: 500 mm, positioning accuracy: 0.1 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, compressed air connection: 7 bar, AUTOMATIC CUT-OFF SAW SALVADOR FEW HOURS LENGTH UP TO 6200MM INCLUDING ERROR MARKING REMOVAL OPTIMIZING 2 SCREENS / LABEL PRINTER Cebvhjwchadjwukegt FULL OPTION BUILT IN 2014 Available May/June 2025

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, overall weight: 2,000 kg, workpiece height (max.): 3,350 mm, LOCKING BENCH FOR FRAMES 6 horizontal and vertical snap fasteners top snap fasteners motor-driven (7 pcs) Length 6000 mm x height 3350 mm Cebvhwuowcg T Nekogt Total length 7m 2000 kg