Condition: new, Working width 3500 mm Djb Hmed Rzc Rscw Escg Working height 2300 mm Number of cylinders 4 St.

Condition: used, Year of construction: 1990, Nestro Bag Filter System 4S/3R Built in 1990 Air flow rate 4840 m³/h, 2100 Pa Filter area: approx. 40 m² Connection diameter: 250 mm 4 chip bags 24 filter hoses L*W*H: 320 x 900 x ~3400 mm Dceb Hmcjwgb Atsw Esg 1 fan type S 250/4, 4.0 kW / diameter = 250 mm

Condition: used, Year of construction: 2018, Working dimension X: 3.710 mm Working dimension Y: 1.620 mm Working dimension Z: 250 mm Number of milling spindles: 2 Main motor power: 10 kW MORBIDELLI JQX spindle: Yes Milling spindle liquid-cooled: Yes Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 28 SCM Tool changer TRB 14: Yes SCM Tool changer FAST 14: Yes Vertical drilling spindles: 17 SCM Drilling aggregate F 29 LTC: Yes Djb Hmcwev Ht Dwe Eecg Horizontal drilling spindles in X: 8 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 8 Positioning aid: Yes Crosshair laser: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Safety device: Bumper SCM Pro-Space: Yes Chip conveyor: Yes Interface for .dxf data: Yes SCM Machine table TV FLEX: Yes SCM TecPad: Yes Workpiece support aids: Yes Automatic central lubrication: Yes Control: SCM eye-M Conformity marking: CE mark Weight: 4.950 kg Space requirement Length: 7,36 m Space requirement Width: 2,65 m Space requirement Height: 2,82 m

Condition: used, Year of construction: 2002, Technical data: Max. workpiece length (measured by stop) 4500 mm. Min. workpiece length (clearance) 200 mm. Max. workpiece height 150 mm Min. workpiece height 30 mm. Max. workpiece width 200 mm. Min. workpiece width 30 mm. Tenoning table feed speed 0-25 m/min. Profiler feed speed 4-20 m/min. TEENNING SECTION: Pos. 1 Saw unit: Motor power: 4 kW (5.5 HP) Speed: 3000 rpm. Spindle diameter: 40 mm. Max. saw blade/chipper diameter: 450 mm with arbor hole 80 mm Pos. 2 Penny shaft: Clamping length: 620 mm with shaft diameter 50 mm, equipped with upper bearing. Power: 11 kW (15 HP) Speed: 3500 rpm. Max. tool diameter: 370 mm. Stroke to under the machining table: 575 mm. Equipped with anti-splinter device: model JOLLY Free programming for vertical positioning: Adjustment 1 mtr./min. Pos. 3 Corner rounding unit: Power: 3 kW (4 HP) Speed: 6000 rpm. Shaft dimensions: 130 mm with shaft diameter 40 mm Electronically horizontally positionable. Pos. 3 under Corner rounding unit: Power: 3 kW (4 HP) Speed: 6000 rpm Axis dimension: 130 mm with 40 mm shaft diameter Electronic and vertical horizontal positionable. Free space Pos. 4 Pin shaft: Clamping length: 620 mm with 50 mm shaft diameter, equipped with top bearing Power: 7.5 kW (10 HP) Speed: 3500 rpm Max. tool diameter: 320 mm Stroke to under the machining table: 575 mm Equipped with anti-splinter device: model JOLLY Free programming on vertical positioning: Adjustment 1 mtr./min. MODIFICATIONS: • This machine will be delivered in a special version, which is suitable for processing workpieces up to 4500 mm in length, 150 mm in height (saw blade / chipper diameter 450 mm.) and automatic turning of the workpiece. • When processing lengths up to 3200 mm, it is possible to process 2 workpieces simultaneously, but for lengths from 3200 to 4500 mm, only 1 workpiece can be processed (automatically). • The machine is equipped with "ROTATEN" for the first and second pin axis. (CNC interpolation of the X and Y axis of the pin table). This is for the production of beveled connections from -60º to +60º • The corner rounding units cannot be used in combination with "Rotates". Dcsbjwfg R Tj Hmcw Eeg • Interpolating movement "Rotates" for 2 pin aggregates. - Device for automatic machining of bevel joints with -/+ 60°. - Motor power of both pin units 11 kW (15 HP). - Max. tool diameter for both pin units 370 mm. - Hardware and software adjustments. PROFILE SECTION: Pos. 6 (right) Profile spindle Spindle dimensions: 620 x 50 mm Motor power: 11.5 kW (15 HP) Speed: 6000 rpm. Min./max. tool diameter: 130-250 mm Vertical movement: 575 mm Vertical CNC-controlled axis: 1 m/min Horizontal CNC-controlled axis: 1 m/min Pos. 7 (right) Profile spindle Shaft dimensions: 620 x 50 mm Motor power: 11.5 kW (15 HP) Speed: 6000 rpm Min./max. tool diameter: 130-250 mm Vertical movement: 575 mm Vertical CNC-controlled axis: 1 m/min Horizontal CNC-controlled axis: 1 m/min Pos. 8 (right) Profile spindle Shaft dimensions: 620 x 50 mm Motor power: 11.5 kW (15 HP) Speed: 6000 rpm TOOLING INCLUDED! MORE INFORMATION ON REQUEST!

Condition: used, Year of construction: 2023, total length: 5,300 mm, total height: 1,700 mm, total width: 1,300 mm, Weight: 1.550 kg Price: On request Debowbzhrj Hmcw Ejcg - Year: 2023 - Documentation available: No - CE mark available: Yes - Serial number: 1000062396 - Voltage [V]: 400 - Transport dimensions: 5300mm x 1300mm x 1700mm (l x w x h) - Transport weight [kg]: 1550kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2019, Extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2019 Extraction nozzle diameter: 300 mm Power: 8.2 kW Nominal flow rate: 5,100 m³/h Maximum flow rate: 7,880 m³/h Negative pressure: 3,090 Pa Fire extinguishing system: Yes Dsbewf U Imj Hmcw Escg Weight: 750 kg Dimensions: 2,650 x 1,100 x 2,250 mm, LxWxH

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Dcjb Hsd Ih H Njmcw Eog Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: used, Year of construction: 1996, Used machine Year of construction: 1996 with heated infeed rail Gluing station with electronic temperature control and synchronized and counter-rotation function - Snipping unit - Trimming unit - Profile scraper - Cleaning station - Edge thickness 0.4 - 5 mm - Panel thickness up to 50 mm - Part length min. 150 mm - Part width min. 60 mm Djb Hmokwg Tbecw Ejcg - Workpiece thickness 8 - 50 mm - Feed rate 12 m/min L x W x H approx. 4000 x 1260 x 1600 mm (width can be reduced to 800 mm for shipping by by removing the removable support) Availability: by arrangement Storage location: Hochheim

Condition: used, Year of construction: 2020, Working dimension X: 3.200 mm Dcsb Hmcwjvb Nv Sj Eog Working dimension Y: 920 mm Working dimension Z: 70 mm Number of milling spindles: 1 Main motor power: 7,5 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 7 Vertical drilling spindles: 9 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Vertical working surface: Yes Machine table: Feed-through technology Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 8 m³/h Special workpiece clamping system: Vacuum clamping system Safety device: enclosed cabin Interface for .dxf data: Yes Remote control: Yes Control: PC control Software: HOLZ-HER CAMPUS, HOLZ-HER CAMPUS NC-HOPS, DIREKT CNC NC-HOPS 7 Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 1.800 kg Space requirement Length: 3,7 m Space requirement Width: 2,95 m Space requirement Height: 2,47 m

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 - Documentation available: No - CE mark available: Yes Debjwbzfds Hmcw Eecg - Serial number: AH/115214 - Voltage [V]: 400 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Dceb Hmod Ih H Socw Eog

Condition: used, Year of construction: 2021, Cutting length: 3.200 mm Pusher stroke: 3.200 mm Number of grippers: 8 HOMAG Deactivation of single grippers: Yes HOMAG 2-fingered grippers: Yes Feedrate max: 130 m/min Continuously variable feed: Yes Saw blade projection: 125 mm Saw blade diameter max: 450 mm Main motor power: 18 kW Scoring saw: Yes, Motoric adjustment Jump scoring: Yes HOMAG VVSH - Soft-/ postforming: Yes Groove cutting function: Yes HOMAG Automatic grooving program: Yes Loading by vacuum lifter: Yes BARBARIC LCV: Yes Labelling: manually Automatic panel storage & retrieval system: Yes Veneer-edging stops: Yes HOMAG Pneumatic trimming stops: Yes Stop side: Right side Optimization: Yes HOMAG SCHNITT PROFIT: Yes HOMAG intelliGuide: Yes HOMAG Destacking module Lite: Yes HOMAG Material-dependent parameters: Yes Deb Hmovb Nr Hecw Eecg HOMAG Machine table fully equipped with air jets: Yes HOMAG Pressure beam height control: Yes HOMAG Roller element on air cushion table: Yes Control: HOMAG CADMATIC 5 Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: used, Year of construction: 2010, - Year: 2010 - Documentation available: No - CE mark available: Yes - Serial number: CA.09.037.10 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Deb Hmcewbzd Tjw Escg Peter Stroomberg

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2781 Weinig Unicontrol 6 Online ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser aiming light for detecting the saw section Length stop CNC controlled ----- > Length 3500 mm > Electronic length stop including positioned cross-cut saw Dcjb Hmjv E R Ikscw Esg Item 2: Tenon and slot spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 3000 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 axially clocked feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g. glass-parted rungs) Rung guide consisting of: Rung support bar from above in the area of ??the profile milling unit vertically right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 4 positions, manual Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 110 mm, 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.8 kW Other features ----- > online-capable > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-free rebating > Milling carriage for milling sashes with frame widths of less than 500 mm. Automatic pneumatic clamping. Minimum frame height 450 mm > Double parts package > Return conveyor for 1-man operation: swivel belt > Screen control > Studio window device > Electronic angle display for studio windows > Industrial PC, with Windows PC control/NEXUS Extraction nozzle diameter: -----...

Year of construction: 2023, Condition: used, Mitre milling aggregates: 1 Workpiece thickness min: 2 mm Workpiece thickness max: 28 mm Rotation speed min: 3.000 rpm Rotation speed max: 6.000 rpm Stepless rotational speed control: Yes Main motor power: 4,5 kW Feedrate max: 5 m/min Continuously variable feed: Yes Gluing of protection foil: Yes Transversal processing: Yes Lengthwise processing: Yes Control: Positioning control Machine type: V-groove milling Declaration of CE-conformity: Yes Conformity marking: CE mark Dcob Hmcwjwhpfrj Esg Total connection: 6 kW

Condition: used, Year of construction: 2014, total length: 6,000 mm, total height: 1,800 mm, total width: 1,500 mm, Weight: 2.900 kg Price: On request - Year: 2014 - Documentation available: No - CE mark available: Yes - Serial number: 24769 - Transport dimensions: 6000mm x 1500mm x 1800mm (l x w x h) - Transport weight [kg]: 2900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dob Howbzdgjmcw Ejcg Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: new, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----- For wooden glass strips, rungs, profile strips, aluminum strips, etc. Pos. 1.1 Article number 942.5103 1 piece HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Incl. 1 piece center support. - Units clamped pneumatically. - Positioning control Exenso DS3 with touch panel 15" display in dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Entering the cutting data by hand - Processing data from a cutting list (data set according to specification) - Processing measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item 1.2 Item number 723.0121 2nd DS saw blade wood Bevel/bevel/flat tooth - positive Item 1.3 Item number 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.4 Article number 942.5997 DS pneumatic feed device Item 1.5 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price in this version - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the remaining pieces with blunt glass strips instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Pos. 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders with anti-twist protection - 2 cylinder holders with clamping lever ----- For rebated glass strips, instead of standard panels without a groove: Pos. 2.2 Article number 942.5241 DS350 table supports grooved according to customer sample The assembled table supports are milled according to the customer's drawing. Please send us all profile drawings that are to be sawn (pdf, dxf and hand samples) ----- If, for example, aluminum is also to be sawn: Item 2.3 Article number 942.5203 DS hydropneumatic feed device (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, with additional charge on request: ----- Item 2.4 Article number 942.5237 DS "Excess length" software (subsequent steps must be confirmed) Sequence control including hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit cuts, right unit moves the material and cuts to size.) ----- Djb Hmcwevzt D Ts Escg Item 2.5 Article number 944.1023 GMF caliper 3000mm complete set (1500mm plus extension 1500mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring ran...

Condition: used, Year of construction: 2001, Cutting length: 4.400 mm Pusher stroke: 4.300 mm Number of grippers: 9 Feedrate max: 60 m/min Continuously variable feed: Yes Saw blade projection: 85 mm Main motor power: 7,5 kW Scoring saw: Yes Labelling: manually Stop side: Left Optimization: Yes Dsbjwhpflo Hmcw Escg SELCO Side aligner: Yes Control: SELCO PC STEUERUNG Conformity marking: CE mark Total connection: 20 kW Weight: 5.800 kg

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the Dob Hjvvx Dzemcw Ejcg shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: used, Working width 3550 mm Working height 2250 mm Number of cylinders 5 St. loading dimensions L x W x H 4500 x 900 x 2600 mm Hess Speedy frame press ----- Machine is functionally tested Insertion dimension / press length max. 3,550 mm Insertion dimension / press height max. 2,250 mm Sliding carriage for width adjustment, locking in 50 mm Dob Hmcjvn U Ruow Eecg Double hole grid system Electrical height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical pressure cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal pressure cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Pressure plate depth 100 mm width 140 mm Cylinder fixation / abutment grid 50 mm Medium pressure beam with shut-off valve Final pressure shut-off and post-pressure control Control and press sequence in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Control for gluing sloped windows 2 pendulum pressure plates 45 degrees Machine dimensions W=4500 mm, D=900 mm, H=2600 mm Weight approx. 1800 kg Pictures original. Video not original, shows identical model (technical data according to manufacturer - no guarantee!)

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. SCM Superset PLUS Comp. 31 also for window production ----- Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min Dob Hsvnv Uzemcw Eecg 1. Spindle ----- First lower spindle horizontal Motor with brake 11 KW Diameter: 40 mm Speed: 6,000 rpm 2. Tool holder HSK ----- First right tool holder vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3. Tool holder HSK ----- First left tool holder, vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake 11 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic Positioning Other technical features: ----- 2 feed units after the upper spindles for shortening the axis distance from 620 mm to 450 mm Air cushion lubrication in the work table Flange feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment 2 x milling unit with belt drive with quick-change system HSK 85 in position 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning position (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning position (2 – 3 – 5 – 6) 3 x electronic setting of the tool diameter (setup) position (3 – 4 –5) Mobile control 10 PRL equipment for removing the glass strip on the 2nd upper horizontal spindle Machine without processing tools Option: SCM RP-S NT transport system for returning the workpiece to the operator, see more Pictures under stock number 6793 (technical data according to the manufacturer - no guarantee!)

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Dcjb Hmcwsvf Raaj Esg Feed speed 5-30 m/min. Control Weinig PowerCom Weinig Powermat 500 for window production Machine is reconditioned and functionally checked ----- Short summary: ----- 6 Spindles with 8,000 rpm and 7.5 KW 5 x HSK/Powerlock Window package with glazing bead separation Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead cutting Large control Powercom with touchscreen Detailed description: ----- Tool arrangement No. 018 for window production Technical specifications: ----- Working width 20 - 230 mm (at tool cutting circle 93 - 125 mm) Working height 8 - 120 mm (at tool cutting circle 93 - 125 mm) 1. Tool holder ----- First lower tool holder Motor with brake 7.5 KW Diameter: 40mm Speed 8,000 rpm including high-performance ball bearings Tool flight circle 125 - 180 mm In connection with PowerLock 93 - 180 mm Axial adjustment range 17 mm Hardened table insert in front of the 1st lower tool holder 2. POWERLOCK/HSK tool holder ----- First right tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Adjustment path radial Min. tool diameter at stop level 93 mm Max. tool diameter behind stop level 200 mm Axially and radially CNC controlled 3. POWERLOCK/HSK tool holder ----- First left tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axial adjustment range for spindle 80 mm Axial adjustment range for PowerLock 55 mm Pressure shoe in front of the left tool holder, including 2 lateral pressure rollers, spring-loaded Axially and radially CNC controlled 4. POWERLOCK/HSK tool holder ----- First upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 5. POWERLOCK/HSK tool holder ----- Second upper tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool cutting circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Adjustment path axial 40 mm Axially and radially CNC controlled 6. POWERLOCK/HSK tool holder ----- Second lower tool holder Motor with brake 7.5 KW Speed 8,000 rpm including high-performance ball bearings Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Adjustment path axial 40 mm Adjustment path radial Min. tool diameter to table level 93 mm Max. tool diameter 6 mm under table level 22...

Condition: new, Working width 630 mm Working height 3-310 mm Motor output 7,5 kW Dcebju Uu U Us Hmcw Esg Number of knives 4-TERSA St. Feed speed 6-20 m/min. Vertikal stroke elektrisch FIMAL thickness planer type SP 63 A ----- NEW MACHINE "Partnership Edition" Technical data / basic equipment: ----- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Stock machine additionally equipped with the following options: ----- ----- - Motor with 7.5 kW / 10 hp - Thicknessing table extension, 600 mm - 2x rubberized pull-out roller - TERSA system knife shaft, including reversible knives ----- Promotional price from stock: on request! ----- All prices ex warehouse plus VAT/plus. Freight and assembly at cost (Technical information according to the manufacturer - without guarantee!)

Condition: used, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage ..... Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate ..... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Tool diameter: max. 130 mm > Axial adjustment path mechanically coupled with crosscut saw. > Radial adjustment pneumatically controlled on/off electronic length stop ..... > Length 4500 mm 1. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800 rpm Deb Hevu Hdysmcw Ejcg > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered 2. Tap and slot spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, continuously variable > Spindle speed: 2,800rpm > Tool diameter: max. 400 mm > Overtravel counter, complete clamping length is countered Transfer tape ..... Included for transferring the parts to longitudinal machining Separation of double parts before the start of longitudinal processing. 1. Profiling spindle (synchronous and counter-rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool flight circle min.: 140 mm > Tool flight circle max.: 232 mm > 2 feed rollers axially pneumatically controlled opposite the spindle, 8 positions > Table top pneumatically controlled to the tool diameter 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, infinitely variable > Radial adjustment path 80 mm NC axis, infinitely variable > Spindle speed: 6000 rpm > Tool fli...

Condition: used, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (length / width) 3065x1600x1900 mm weight of the machine ca. 1500 kg Löwer Leistomad SD Window single wood intermediate sanding machine ----- Machine factory tested by Löwer! Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW Dcob Hmcjvnv Twew Esg - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - Linear guidance of all grinding units via linear ball bearing sets hardened waves - Time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By immersing it is possible To be able to deliver aggregates deeper into the profiles. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter to adjust the Grinding intensity using frequency converters (separately for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fasteners for grinding discs (wood pulp) - Feed via three lower and one upper conveyor belt and spring-loaded Pressure rollers with continuous speed 5-15m/min - Parameters that can be set using the touch panel are workpiece thickness and workpiece width (left side units individually), immersion depth of side units, Spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and profile shape (Workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic clamping of the workpiece as well as retraction after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm - Workpiece height 12-120mm - Suction connection 5 x 100mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (housing) x width x height (mm): 3065x 1500 x 1600, complete length: 3800mm (including inlet roller conveyor with stop for Leistomat SD) - Weight: approx. 1500 kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Included options: Adjust the machine as follows: - max. workpiece thickness: 160mm - max. workpiece width: 260mm (in the transshipment process, workpieces must be 2x be allowed through) Transport belt width remains at 200mm - Side units with grinding height 120mm instead of 100mm - more powerful engines for side units 0.75kw instead of 0.37 - larger frequency converters for the side units Quick release disc spindle side for quick tool changes for DiscMaster 4TD or CrossMaster 2TD (only for clockwise rotation) Quick release disc tool for Softdisc, Combidisc or Mediumdisc Ø 250mm (only for clockwise rotation) -----...