Condition: used, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (length / width) 3065x1600x1900 mm weight of the machine ca. 1500 kg Löwer Leistomad SD Window single wood intermediate sanding machine ----- Machine factory tested by Löwer! Dolrakevnv Twjpiskl Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above 0.75kW, - 1 slat roller unit L=200mm above 0.75kW - 1 soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit L=200mm below 0.75kW, - 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm - Linear guidance of all grinding units via linear ball bearing sets hardened waves - Time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By immersing it is possible To be able to deliver aggregates deeper into the profiles. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter to adjust the Grinding intensity using frequency converters (separately for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fasteners for grinding discs (wood pulp) - Feed via three lower and one upper conveyor belt and spring-loaded Pressure rollers with continuous speed 5-15m/min - Parameters that can be set using the touch panel are workpiece thickness and workpiece width (left side units individually), immersion depth of side units, Spindle speed, feed speed - Saving the parameters as machine programs in program mode - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and profile shape (Workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic clamping of the workpiece as well as retraction after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm - Workpiece height 12-120mm - Suction connection 5 x 100mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (housing) x width x height (mm): 3065x 1500 x 1600, complete length: 3800mm (including inlet roller conveyor with stop for Leistomat SD) - Weight: approx. 1500 kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Included options: Adjust the machine as follows: - max. workpiece thickness: 160mm - max. workpiece width: 260mm (in the transshipment process, workpieces must be 2x be allowed through) Transport belt width remains at 200mm - Side units with grinding height 120mm instead of 100mm - more powerful engines for side units 0.75kw instead of 0.37 - larger frequency converters for the side units Quick release disc spindle side for quick tool changes for DiscMaster 4TD or CrossMaster 2TD (only for clockwise rotation) Quick release disc tool for Softdisc, Combidisc or Mediumdisc Ø 250mm (only for clockwise rotation) -----...

Condition: used, Year of construction: 1990, Nestro Bag Filter System 4S/3R Built in 1990 Air flow rate 4840 m³/h, 2100 Pa Filter area: approx. 40 m² Djlraowgb Atjkpijkl Connection diameter: 250 mm 4 chip bags 24 filter hoses L*W*H: 320 x 900 x ~3400 mm 1 fan type S 250/4, 4.0 kW / diameter = 250 mm

Condition: used, Year of construction: 2018, Working dimension X: 3.710 mm Working dimension Y: 1.620 mm Working dimension Z: 250 mm Number of milling spindles: 2 Main motor power: 10 kW MORBIDELLI JQX spindle: Yes Milling spindle liquid-cooled: Yes Dkelrasv Ht Dwskpijl Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 28 SCM Tool changer TRB 14: Yes SCM Tool changer FAST 14: Yes Vertical drilling spindles: 17 SCM Drilling aggregate F 29 LTC: Yes Horizontal drilling spindles in X: 8 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 8 Positioning aid: Yes Crosshair laser: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Safety device: Bumper SCM Pro-Space: Yes Chip conveyor: Yes Interface for .dxf data: Yes SCM Machine table TV FLEX: Yes SCM TecPad: Yes Workpiece support aids: Yes Automatic central lubrication: Yes Control: SCM eye-M Conformity marking: CE mark Weight: 4.950 kg Space requirement Length: 7,36 m Space requirement Width: 2,65 m Space requirement Height: 2,82 m

Condition: used, Year of construction: 2002, Technical data: Max. workpiece length (measured by stop) 4500 mm. Min. workpiece length (clearance) 200 mm. Max. workpiece height 150 mm Min. workpiece height 30 mm. Max. workpiece width 200 mm. Min. workpiece width 30 mm. Tenoning table feed speed 0-25 m/min. Profiler feed speed 4-20 m/min. TEENNING SECTION: Pos. 1 Saw unit: Motor power: 4 kW (5.5 HP) Speed: 3000 rpm. Spindle diameter: 40 mm. Max. saw blade/chipper diameter: 450 mm with arbor hole 80 mm Pos. 2 Penny shaft: Clamping length: 620 mm with shaft diameter 50 mm, equipped with upper bearing. Power: 11 kW (15 HP) Speed: 3500 rpm. Max. tool diameter: 370 mm. Stroke to under the machining table: 575 mm. Dolraowfg R Tekpiskl Equipped with anti-splinter device: model JOLLY Free programming for vertical positioning: Adjustment 1 mtr./min. Pos. 3 Corner rounding unit: Power: 3 kW (4 HP) Speed: 6000 rpm. Shaft dimensions: 130 mm with shaft diameter 40 mm Electronically horizontally positionable. Pos. 3 under Corner rounding unit: Power: 3 kW (4 HP) Speed: 6000 rpm Axis dimension: 130 mm with 40 mm shaft diameter Electronic and vertical horizontal positionable. Free space Pos. 4 Pin shaft: Clamping length: 620 mm with 50 mm shaft diameter, equipped with top bearing Power: 7.5 kW (10 HP) Speed: 3500 rpm Max. tool diameter: 320 mm Stroke to under the machining table: 575 mm Equipped with anti-splinter device: model JOLLY Free programming on vertical positioning: Adjustment 1 mtr./min. MODIFICATIONS: • This machine will be delivered in a special version, which is suitable for processing workpieces up to 4500 mm in length, 150 mm in height (saw blade / chipper diameter 450 mm.) and automatic turning of the workpiece. • When processing lengths up to 3200 mm, it is possible to process 2 workpieces simultaneously, but for lengths from 3200 to 4500 mm, only 1 workpiece can be processed (automatically). • The machine is equipped with "ROTATEN" for the first and second pin axis. (CNC interpolation of the X and Y axis of the pin table). This is for the production of beveled connections from -60º to +60º • The corner rounding units cannot be used in combination with "Rotates". • Interpolating movement "Rotates" for 2 pin aggregates. - Device for automatic machining of bevel joints with -/+ 60°. - Motor power of both pin units 11 kW (15 HP). - Max. tool diameter for both pin units 370 mm. - Hardware and software adjustments. PROFILE SECTION: Pos. 6 (right) Profile spindle Spindle dimensions: 620 x 50 mm Motor power: 11.5 kW (15 HP) Speed: 6000 rpm. Min./max. tool diameter: 130-250 mm Vertical movement: 575 mm Vertical CNC-controlled axis: 1 m/min Horizontal CNC-controlled axis: 1 m/min Pos. 7 (right) Profile spindle Shaft dimensions: 620 x 50 mm Motor power: 11.5 kW (15 HP) Speed: 6000 rpm Min./max. tool diameter: 130-250 mm Vertical movement: 575 mm Vertical CNC-controlled axis: 1 m/min Horizontal CNC-controlled axis: 1 m/min Pos. 8 (right) Profile spindle Shaft dimensions: 620 x 50 mm Motor power: 11.5 kW (15 HP) Speed: 6000 rpm TOOLING INCLUDED! MORE INFORMATION ON REQUEST!

Condition: used, Year of construction: 2023, total length: 5,300 mm, total height: 1,700 mm, total width: 1,300 mm, Weight: 1.550 kg Price: On request - Year: 2023 - Documentation available: No - CE mark available: Yes - Serial number: 1000062396 - Voltage [V]: 400 - Transport dimensions: 5300mm x 1300mm x 1700mm (l x w x h) - Transport weight [kg]: 1550kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Delrakpswbzhrjiokl Glenn Smeets

Condition: excellent (used), Year of construction: 2019, Extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2019 Extraction nozzle diameter: 300 mm Power: 8.2 kW Nominal flow rate: 5,100 m³/h Maximum flow rate: 7,880 m³/h Negative pressure: 3,090 Pa Fire extinguishing system: Yes Weight: 750 kg Delraswf U Imskpiekl Dimensions: 2,650 x 1,100 x 2,250 mm, LxWxH

Condition: used, Year of construction: 1996, Used machine Year of construction: 1996 with heated infeed rail Gluing station with electronic temperature control and synchronized and counter-rotation function Dslrakpjkwg Tboiekl - Snipping unit - Trimming unit - Profile scraper - Cleaning station - Edge thickness 0.4 - 5 mm - Panel thickness up to 50 mm - Part length min. 150 mm - Part width min. 60 mm - Workpiece thickness 8 - 50 mm - Feed rate 12 m/min L x W x H approx. 4000 x 1260 x 1600 mm (width can be reduced to 800 mm for shipping by by removing the removable support) Availability: by arrangement Storage location: Hochheim

Condition: used, Year of construction: 2010, Functionality: fully functional, Extraction system - motor 3kW (4 HP) - volume flow max.: 3200 m³/h - nominal volume flow: 20 m/sek, 1450 m³/h - negative pressure: 2200 Pa - filter surface: 10 m² Dkolewdxb Ijrakpijl - diameter of extraction: 160 mm

Condition: used, Year of construction: 2020, Working dimension X: 3.200 mm Working dimension Y: 920 mm Working dimension Z: 70 mm Number of milling spindles: 1 Main motor power: 7,5 kW Dkelrakpsvb Nv Seijl Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 7 Vertical drilling spindles: 9 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Vertical working surface: Yes Machine table: Feed-through technology Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 8 m³/h Special workpiece clamping system: Vacuum clamping system Safety device: enclosed cabin Interface for .dxf data: Yes Remote control: Yes Control: PC control Software: HOLZ-HER CAMPUS, HOLZ-HER CAMPUS NC-HOPS, DIREKT CNC NC-HOPS 7 Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 1.800 kg Space requirement Length: 3,7 m Space requirement Width: 2,95 m Space requirement Height: 2,47 m

Condition: good (used), Year of construction: 2017, Functionality: fully functional, CNC Machining Center SCM TECH Z5 Drilling unit with 18 spindles, 12 vertical spindles, 6 horizontal spindles Dolrowbhdyoakpijkl Groove saw 5 axis Prism motor KT HSK mounting, liquid cooled Tool changer with 16 positions Laterally positioned changer with 8 positions Guebkpvowbhdyj H H Eja PC control Laser positioning cups Tool length measurement Waste conveyor belt Price collected t Commissioning 2017, First owner, very well maintained. Disassembly and loading for the buyer. Available from September 2025

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 - Documentation available: No - CE mark available: Yes - Serial number: AH/115214 - Voltage [V]: 400 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dkelrewbzfdoakpiel Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: not inspected (used), Year of construction: 2009, Wide Belt Sander Format4 Finish1302 Year of manufacture 2009 Touch display Sanding height approx. 3 - 170 mm Sanding width approx. 1300 mm 2 sanding units (individually controllable) Air cushion Program storage possible 22 kW motors (2 motors - separate for each belt!) Weight approx. 2.3 tons Only solid wood or veneer was sanded - no painted surfaces or anything else! Instruction manual and key included! Shipping available upon request for an additional charge! Machine can be inspected! By appointment! Dslrewdpldeakpiskl Location: ex warehouse, 54634 Bitburg - available immediately - Sold without warranty - without guarantee - free shipping -

Condition: good (used), Year of construction: 2018, Functionality: fully functional, Edgebander (R0.22.50) - Electronic control "Orion One Plus" - Rectification group RT-V1 - Glue group VC-VM - Saw group K-2 - Milling group R-K - Rounding milling group Round 1 Dkolraewdxbuskpiol - Belt scraping group RAS-V - 62.14.33 : Electronic control Touch 7 - 62.12.03 : Anti-stick group AAR - 62.14.06 : Saw group K-2 with rounding milling function - 62.12.81 : Glue scraping group RC-V - 62.12.49 : Infrared lamp - 62.12.84 : Quick change of glue pot

Year of construction: 2023, Condition: used, Mitre milling aggregates: 1 Workpiece thickness min: 2 mm Workpiece thickness max: 28 mm Dkolrakswhpfrepiel Rotation speed min: 3.000 rpm Rotation speed max: 6.000 rpm Stepless rotational speed control: Yes Main motor power: 4,5 kW Feedrate max: 5 m/min Continuously variable feed: Yes Gluing of protection foil: Yes Transversal processing: Yes Lengthwise processing: Yes Control: Positioning control Machine type: V-groove milling Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 6 kW

Condition: used, Year of construction: 2010, - Year: 2010 - Documentation available: No - CE mark available: Yes - Serial number: CA.09.037.10 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg Dolraewbzd Tskpiokl

Condition: good (used), Year of construction: 2022, Functionality: fully functional, Fully automatic panel saw - cutting length 3200 mm - saw group with scoring and sawing function - READY control - 1 fixed, 2 mobile tables - telescopic guide with digital readouts - mitre stop Dkelewdxa Rsrakpisl - laser for indicating the cutting line - motor 7 kW (9.5 HP)

Condition: used, Year of construction: 2001, Cutting length: 4.400 mm Pusher stroke: 4.300 mm Number of grippers: 9 Feedrate max: 60 m/min Continuously variable feed: Yes Saw blade projection: 85 mm Main motor power: 7,5 kW Delswhpfljrakpijkl Scoring saw: Yes Labelling: manually Stop side: Left Optimization: Yes SELCO Side aligner: Yes Control: SELCO PC STEUERUNG Conformity marking: CE mark Total connection: 20 kW Weight: 5.800 kg

Condition: used, Year of construction: 2014, total length: 6,000 mm, total height: 1,800 mm, total width: 1,500 mm, Weight: 2.900 kg Price: On request Delrakpswbzdgjiokl - Year: 2014 - Documentation available: No - CE mark available: Yes - Serial number: 24769 - Transport dimensions: 6000mm x 1500mm x 1800mm (l x w x h) - Transport weight [kg]: 2900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 2000, Functionality: fully functional, Window press - capacity max/min.: 3000*2000/150*360 mm Dkelraewdxawskpijl

Condition: good (used), Year of construction: 2022, Functionality: fully functional, Assembly line for timber frame construction - framing machine X-Frame - clamping table X-Clamp - automatic working bridge X-Multi - tilting table X-Tilt - clamping table X-Clamp Djlrakpswdw Umsiskl - clamping table X-Clamp - bridge X-Multi

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, Four sided planer - working width 15 - 300 mm - working thickness 10 - 150 mm - min. piece length 800 mm - min. piece length 300 mm Dkslraswdw Sljkpisl - feed table 2500 mm - pneumatic left side pressure roller - two-piece pressure shoe - additional table for multi saw - Anti kickback device for multi saw - Schneider 5.7" touch screen EASYSET control * nc control axis-3 (left radial) * nc control as-4 (top radial) * nc control height control pressure bar - Feed motor 7.5 HP, 6-24 m/min. - 1st axis, 15 HP, diam. 50 mm, 6000 rpm - 2nd axis, 10 HP, diam. 50 mm, 6000 rpm - 3rd axis, 10 HP, diam. 50 mm, 6000 rpm - 4th axis, 20 HP, diam. 50 mm, 6000 rpm - 5th axis, 20 HP, diam. 50 mm, 6000 rpm

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, Machine for inserting vinyl glue and reins with gun - vibrating bowl for feeding the reins - glue tank 9 kg - water tank 9 liters - cleaning disposition Dolswdw I Horakpiskl - pneumatic pistol - for reins 8 mm, length 25 to 50 mm

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, Pen machine - saw group * saw diameter 500 mm * max. cutting width 200 mm * 2.2 kW motor - horizontal milling head above * tool diameter 200 mm * max pin length 150 mm * motor 2.2 kW - horizontal milling head bottom * diameter of the tool 200 mm * max. tenon length 150 mm * 2.2 kW motor Dslrakpjwdw Hioiekl - milling spindle * diameter of spindle 50 mm * max tool diameter 350 mm * length of spindle 180 mm * 5.5 kW motor - swiveling table +/- 60° - pneumatic pusher - stop bar max. 3000 mm - counter profile rotatable - Swinging of the stop bar +/- 45°

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, Pen machine - inclinable guide +/- 45° - 2 pneumatic pushers - saw * 3 kW motor power * saw blade diam. 400 mm - pin heads * motor strength 2.2 kW * diam. heads 160 mm * heads length 150 mm * max. opening 185 mm Dslrowdw Ersakpiekl - toupie * shaft length 190 mm * shaft diam. 50 mm * motor strength 5.5 kW * max tool diam. 320 mm

Condition: used, Functionality: fully functional, table length: 3,000 mm, Long belt sander with sanding table 3000 mm Dkslrakpewdw Eleijl