Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Condition: As good as new Equipment and technical data: Deb Hdbowhukten Hjkl Mobile clean air dust extractor The most powerful among the mobile dust extractors Mobile dust extractors of the Vacomat series are suitable for extracting dust and chip material. Dust extractors are often used as single or multi-machine extraction systems in small and medium-sized companies with air volumes of up to 8,000 m³/h. Our mobile dust extractors are tested according to the regulations of the Wood Trade Association. With the H3 (residual dust content < 0.1 mg/m³) and GS (tested safety) test marks, Vacomats can also be installed indoors in the workshop. To ensure healthy return air, we only use our high-quality filter material of dust class "M". Our dust extractors achieve low electricity costs for environmentally friendly extraction operation thanks to energy-saving, high-efficiency motors "made in Germany." Cleaning methods for our mobile dust extractors • Pneumatic-mechanical cleaning (designated XP) using a patented vibration system by "knocking out"; compressed air connection required; starts manually as needed when the processing machine is switched off • Electro-mechanical cleaning (designated XPe) using an efficient vibration motor; no compressed air connection required; starts automatically after the processing machine is switched off • Compressed air cleaning (optional) for continuous operation, no extraction breaks necessary, especially recommended for the finest and special dusts from CFRP, GRP, gypsum, etc. Vacomat 250 XP, 300 XP, and 350 XP dust extractors are supplied with an automatic control cabinet: automatic fan start-up, automatic filter regeneration The highlights at a glance: ? Performance sizes from the small entry-level model to the powerful one Extraction center ? Application-specific component selection for cleaning and disposal options ? Environmentally friendly and energy-saving operation, also through heat recovery (recirculation principle) ? Energy-saving control features (PLC control) including volume flow monitoring ? User-friendly control of the dust extractor is also possible via the processing machine ? Quiet operation thanks to soundproof housing ? Maximum workplace safety thanks to BG certification (according to GS HO 07) and pressure-resistant construction (according to DIN 8416) ? From Vacomat 250 XP, including automatic fire extinguishing system (powder extinguisher) ? The tested filter materials guarantee healthy return air ? Largest possible filter area thanks to SchukoCone® filter bags - especially recommended for the finest dusts ? Delivered plug-in for quick and easy on-site installation Technical specifications 300 XP: Suction nozzle Ø 300 mm Motor power max. 7.5 kW Flow rate 5,950 m³/h Nominal flow rate (at 20 m/s) 5,087 Valve pressure 2,760 Pa Filter area 32 m² Certification mark: H3 (residual dust content < 0.1 mg/cbm), BGHM HO 143032 Filter regeneration: pneumatic Sound pressure level: 74 dB(A) Incl. Schuko V22/23 series control cabinet Incl. forklift brackets Weight including packaging: 990 kg Transport dimensions: 3.70 m * 1.60 m * 2.30 m Installation dimensions: 3.65 m * 1.54 m *

Condition: excellent (used), Year of construction: 1996, Feeder, circular saw feeder for sliding table saws For cutting moldings, window scantlings, trimming ABS edges, etc. Attaches to the circular saw stop Motor 0.14 kW, 380 volts Two feed speeds: 13 + 16 m/min Integrated electric safety magnet system secures the feeder to the saw table with an electromagnet Quick adjustment of the workpiece height via handwheel Rubberized feed rollers slightly sawn, but still usable Max. workpiece height approx. 80 mm Minimum workpiece length approx. 200 mm Extraction connection Original paint, only slightly touched up Dkeb Hdowcyvwobn Hjl CE mark With mobile wooden transport box The mounting rail is 41 x 21 mm, internal dimensions 31 x 11 mm, groove width 13 mm Adaptable to many sliding table saw manufacturers, but other adapter rails are also available Panhans Weight approx. 30 kg The machine can be demonstrated on-site by appointment. We only offer machines that are in stock and ready for demonstration; see "Other offers from this supplier."

Condition: good (used), Year of construction: 2000, operating hours: 3,511 h, Functionality: fully functional, machine/vehicle number: 67881, total width: 2,000 mm, total height: 2,125 mm, total length: 2,740 mm, grinding width: 1,350 mm, overall weight: 4,550 kg, grinding height: 150 mm, power: 21 kW (28.55 HP), Bütfering Classic 313 QCE Dksbjvyghij Hdbn Hel Year of manufacture 2000, max. sanding width 1350mm, total of 3 sanding units 1x cross belt, 2x sanding shoes, segment sanding shoe/width electronic/25mm, cleaning brush, vacuum table, sanding belt length 1900mm, sanding belt blow-off device, belt change side left, application control, Bütfering articulated pressure bar, combination unit 16.5/21KW, cross belt 15KW, shoe unit 15KW,

Condition: used, Year of construction: 2023, total length: 3,800 mm, total height: 1,700 mm, total width: 700 mm, Weight: 1.000 kg Price: On request - Year: 2023 - Documentation available: No - CE mark available: Yes - Serial number: 1000063006 - Voltage [V]: 400 - Power [kW]: 6.8 - Transport dimensions: 3800mm x 700mm x 1700mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Dobjwbkn Ie Hdbn Hskl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Fine tooth saw blade 216x2,3x30 W60, 500125 For clean and clear cross cuts in solid wood as well as for coated or veneered boards Number of teeth: 60 tooth shape: W Cutting width: 2.3 mm Bore diameter: 30 mm Dsb Hji A Ilwedbn Hskl Diameter: 216 mm Bore Ø min.: 30 mm Diameter min.: 216 mm rake angle: -5 °

Condition: good (used), Functionality: fully functional, Machine type: Vertical wood band saw, heavy cast iron construction Manufacturer: PFAFFENBACH Model: HBS 600 Year of manufacture: approx. 1978 Condition: good Type of offer: used machine Technical specifications: Thrust: 592 mm Cutting range: max. cutting height 240 mm Drive: 2.2 kW Note: Pivoting table 750 x 640 mm, stop, 2 spare saw blades Weight: 500 kg Djb Hdbjwfnhmsn Hskl The machine is in good, ready-to-use condition and can be inspected and demonstrated at our premises. We would be pleased if you are interested in our offer. Errors, changes, and prior sale excepted.

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Condition: like new Equipment and technical specifications: Holz-Her DYNESTIC 7535 10.5 Lift machining center Processing length 3100 mm Machine frame in welded construction with ground and hardened prism guides for the traveling column, unit head, and consoles Gantry-style traveling column Rack and pinion drive, helical gears, in the X and Y directions 1 ball screw in the Z direction for precise positioning MATRIX table Fixed, continuous machining table with grid divisions, continuous slots in the X and Y directions, 50 mm slot spacing with 25 meters of sealing cord for clamping the wear plate 1 machining area with stop bars / stop Height 30 mm, pneumatically lowerable. Two stop bars each in the Y direction and one stop in the X direction on the right (viewed from the front edge of the machine). Remote maintenance: Integrated network card for transferring control and program data. Data is transferred via a high-speed internet connection. Requirement: High-speed internet connection on the machine. USB port for data backup or for directly loading machining programs on the control panel. TECHNICAL DATA: Machining dimensions 7535 10.5: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances: X = 4695 mm Y = 2305 mm Z = 565 mm Max. machining height 7535/7735 Classic without pusher Z = 300 mm from table top edge (without wear plate) Max. overtravel height of the pusher over the table of the Push/Auto/Lift versions: Z = 250 mm from table top edge (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE OPERATION: SOFTWARE CAMPUS V7 Plus CAD/CAM Software 1 license including material removal simulation 1 pc. Software license secured via license plug for the machine CAMPUS V7 PLUS, software for CNC machining centers Consists of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS = 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology CONTROL Incl. ECO MODE - time-controlled shutdown of drive and control components to save energy Windows-based industrial PC controller Intel Core i5-6600 8 GB RAM 256 GB M.2 (NVMe SSD) 24V DC industrial standard Dsb Hdowhukgjbn Hekl Electronic stop monitoring for all selected stop bars or stop bolts on the machine. Safety device to prevent damage to the stops. Handheld control unit for remote control of the machine (13 m) with the following operating functions: > Start/stop of the machining program > Speed control of the machining cycles > Reset button > Manual feed/rapid traverse for all axes > Emergency stop Control panel with 21.5" 16:9 touchscreen Capacitive multi-touch screen for intuitive operation - Continuous glass surface - Includes wireless

Condition: used, Year of construction: 2012, Working dimension X: 3.280 mm Working dimension Y: 1.320 mm Working dimension Z: 170 mm Number of milling spindles: 1 Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 22 Linear tool changer: Yes Disc tool changer: Yes Number of exchangeable units: 4 Vertical drilling spindles: 10 Dkobowhfdqe Hdbn Hjl Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Lock recess milling aggregate: Unit, changeable Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Safety mat Two rows of stops: Yes Workpiece support aids: Yes Handheld terminal: Yes Control: BIESSE BH 660 Software: BIESSE BIESSEWORKS

Condition: good (used), Year of construction: 1979, Sawblade tiltable nein ° Length of the rolling table 2800 mm cutting width 1250 mm Motor output 5,5 kW Cutting height 125 mm Saw blade diameter 400 mm Dkobewgi Ans Hdbn Hol

Condition: used, Year of construction: 2008, total length: 2,900 mm, total height: 1,370 mm, total width: 750 mm, Weight: 610 kg - Year: 2008 - Documentation available: No - CE mark available: Yes - Serial number: 11-E-1670 - Voltage [V]: 400 - Transport dimensions: 2900mm x 750mm x 1370mm (l x w x h) - Transport weight [kg]: 610kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dobowbkg Dj Hdbn Hokl Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Special saw blade 216x2,3x30 WZ/FA60, 500123 Deb Hei A Iltodbn Hjkl For laminate flooring and solid surface materials Number of teeth: 60 tooth form: WZ/FA cutting width: 2.3 mm Bore Ø: 30 mm Diameter: 216 mm Bore Ø min.: 30 mm Diameter min.: 216 mm rake angle: -5 °

Year of construction: 2022, Condition: used, Used machine Year of manufacture 2022 Condition: like new, still in original packaging Image shows an example of the system Features and technical specifications: JumboErgo vacuum tube lifter With the JumboErgo vacuum tube lifter, both light and heavy loads can be moved quickly and precisely. Load capacity: 140 kg Consisting of: 1 x direct-drive vacuum blower for tube lifter applications Type: SBL-260-520-IE3-TYP1 Size: L Suction capacity (50 Hz): 260 m³/hm Vacuum (50 Hz): -520 mbar Rated power (50 Hz): 4 kW Version: IE3: EU/CN/IND Sound pressure level (50 Hz): 74 dB Voltage (50 Hz): D230V/Y400V ±10% Voltage (60 Hz): D265V/Y460V ±10% Approval: UR or UL or CSA Protection class: IP 55 - Powerful blower with optimal characteristics for tube lifter applications - Accessories: Vacuum safety valve and exhaust silencer - The device is mounted using a base for floor, wall, or column mounting. (Mounting hardware not included) - Safe handling even with porous workpieces - Electrical design according to VDE, UL, and CSA The installation of a dust filter in the suction line is strongly recommended to protect the vacuum generator from any type of contamination. The noise level of the entire system may vary from the vacuum generator's values depending on the suction cup. Note: Recommendation for on-site circuit breakers: D 230V [50Hz] / D 265V [60Hz] / Y 400V [50Hz]: Type D16 1 lifting unit for Jumbo hose lifter Type: HE-140-1700-230 Dob Hdbjwhukmsn Hokl Load capacity (horizontal): 140 kg Outer diameter: 230 mm Height H: 2920 mm Lifting unit stroke: 1840 mm Color: RAL 7035 Light Gray - Flat, ball-bearing swivel inlet for continuous rotation of the control unit - Suspension eye on the swivel inlet for easy attachment to a crane chassis - Suspension eye diameter: 23 mm - Flexible, robust, and durable multi-layer lifting hose - Safety check valve for slow lowering of the load during Power outage * Since the lifting hose is produced manually, a tolerance of +/- 50 mm in the lifting height must be taken into account. 1 x Control Unit for Jumbo Hose Lifter Type: BE-140-750-E-STAR Control Element: Ergo Load Capacity: 140 kg Operating Handle Length: 750 mm Design: Rigid Color: RAL 7035 Light Gray - Rotary handle for ergonomic control of the up and down movement and the lifting speed with and without load - Adjustable floating position without load Due to the length of the operating handle, the use of a spring balancer is mandatory. 1 x Hose for Vacuum and Compressed Air Systems Type: VSL 58-50 15 PVC-PS Outer Diameter D: 58 mm Inner/Bore Diameter d: 50 mm Length L: 15 m Material: PVC, with PVC spiral Installation Radius (min): 170 mm Color: Gray Pressure Range (Operating Pressure): -0.50 ... 0.50 bar Ambient temperature: -40 ... 60 °C 1 dust filter Type: STF 50 P 4.5 SSD Connection: Ø50mm Design: Piclon housing Nominal flow rate: 270 m³/h Filter fineness: 3 μm Additional equipment: SSD hose clamps - Plastic housing with replaceable filter cartridge, including bracket for wall mounting and 2 hose clamps - Total weight

Condition: used, Year of construction: 2023, Longitudinal traversing range: 33 m Crosswise traversing range: 13,5 m Number of rows max: 3 Places per row max: 10 Stack height max: 2.000 mm Workpiece width max: 2.100 mm Workpiece width min: 700 mm Workpiece length max: 4.200 mm Workpiece length min: 1.600 mm Load capacity: 150 kg Feedrate max: 180 m/min Infeed roller conveyor: Yes Raised storage level: Doppelstocklager Vacuum lifter: Yes Turning device: Yes Management of residual parts: Yes Adjustment to panel size: Yes Labelling: Yes Control: PC control Control cabinet cooling: Yes Total connection: 18 kW Debjwhfc To Hdbn Hekl

Condition: good (used), Year of construction: 1990, cut-off saw 3 KW Spindle diameter 40 mm Spindle length 185 mm Dob Hdbowgi Abjn Hjkl

Condition: excellent (used), Year of construction: 1989, Planer and Thicknesser FS41 GEA – Casadei With slotted hole device, but missing collets The chassis is missing a drawbar Very stable, very good condition Year of manufacture 1989 Planer table: 2040 x 410 mm, thicknessing table: 700 x 410 mm 3 kW, shaft speed 5000 rpm Shaft diameter 120 mm, number of cutters 4, feed rate 8 – 14 m/min Maximum planing height 230 mm Weight 560 kg Table height adjustment, removable dust extractor hood New price was €8,800 Deb Hdowfflisbn Hokl

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Suitable for thick solid wood and laminated panels Trimming length: 2250 mm Max. saw blade diameter: 315 mm With mounted scoring unit Max. cutting height at 90° / 45°: 100 / 80 mm Dsb Hdbnswhulko Hjkl Cutting width at the parallel stop: 900 - 1270 mm Motor: 4 kW Stable support thanks to a 270 mm wide sliding carriage and trimming frame Availability: Short term Location: Röllbach

Condition: used, Year of construction: 2019, Sanding width: 1.350 mm Workpiece thickness min: 4 mm Passage height max: 170 mm Sanding aggregates total: 2 Sanding rollers: 2 Dksbjwhfc Ho Hdbn Hjl Steel roller: Yes Combination unit: 1 Sanding pads total: 1 Vacuum table: Yes Sensing of workpiece thickness: mechanical Main motor power: 11 kW Feedrate max: 9 m/min Blow-off device: Sanding belt Configuration of aggregates: r-c-u Side of belt change: Left Protection against workpiece over-thickness: Yes Control: B&R Power Panel Conformity marking: CE mark Weight: 2.060 kg Space requirement Length: 2 m Space requirement Width: 1,9 m Space requirement Height: 2,4 m

Condition: excellent (used), Ball bearing thrust ring set - Thrust ring set Deb Hjwfd E Uodbn Hskl 1 ball bearing idler bushing size 1, 1 lock washer size 1 1 lock washer size 1 1 thrust ring each size 1: D = 90, 100, 105, 110, 115, 120, 125 mm

Year of construction: 2022, Condition: used, Screw compressor with receiver and refrigeration dryer Used Year of manufacture 2022 Compact screw compressor with variable speed control and innovative LOGIN control Technical specifications: Maximum pressure: 10 bar Effective delivery rate: 1,050 l/min Motor power: 7.5 kW Noise level: 62 dB(A) Dimensions: 1,200 x 650 x 1,540 mm Connection: 1/2" Dksbowhuk Hs Hdbn Hol Receiver capacity: 270 l (AD2000) Weight: 295 kg Features Frequency controlled? Electronic control system; Oil heat exchanger? Compressed air receiver; Hot-dip galvanized inside and out; Drive transmission: Direct coupling; Star-delta connection; AD 2000 compliant; Yes; Availability: Approx. May 2025 Storage location: Bavaria

Condition: used, Year of construction: 2022, Cutting length: 4.300 mm Pusher stroke: 4.300 mm Number of grippers: 10 Dsbewhfcto Hdbn Hekl Feedrate max: 120 m/min SCM HIGH SPEED: Yes Continuously variable feed: Yes Saw blade projection: 80 mm Saw blade diameter max: 340 mm Main motor power: 9 kW Scoring saw: Motoric adjustment Groove cutting function: Yes Labelling: manually For sensible workpieces: Clamping pressure adjustable Stop side: Left Optimization: Yes Workpiece width measuring: Yes Workpiece length measurement: Yes SCM Saw Set: Yes Control: SCM eye-M Software: SCM MAESTRO ACTIVE, SCM MAESTRO CONNECT, SCM MAESTRO CUT MANAGER, SCM MAESTRO CUT EDITOR, SCM MAESTRO CUT UTILITY, SCM MAESTRO OTTIMO CUT, SCM MAESTRO OTTIMO IMPORT, SCM MAESTRO PATTERN Conformity marking: CE mark Weight: 4.250 kg Space requirement Length: 7,1 m Space requirement Width: 6,4 m

Condition: used, Year of construction: 2022, Sanding width: 1.350 mm Workpiece thickness min: 4 mm Passage height max: 170 mm Sanding aggregates total: 2 Sanding rollers: 2 Steel roller: Yes Combination unit: 1 Sanding pads total: 1 Polishing aggregate: Scotch Brite Vacuum table: Yes Vacuum fan: Yes Sensing of workpiece thickness: mechanical Main motor power: 18,5 kW Adjustable sanding belt speed: continuously variable Aggregates with frequency inverters: 1 Feedrate max: 9 m/min Continuously variable feed: Yes Blow-off device: Sanding belt Configuration of aggregates: r-c-u Side of belt change: Left Dksbswhfcmj Hdbn Hel Control: SCM eye-S Conformity marking: CE mark Weight: 2.060 kg

Condition: used, Year of construction: 2022, Working dimension X: 5.020 mm Working dimension Y: 1.680 mm Working dimension Z: 170 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Blow-off device: Yes Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis 5th axis: 5-axes spindle SCM 5-axes spindle PRISMA KT: Yes Tool clamping system: HSK-F63 Tool changer positions: 28 SCM Tool changer RAPID 16: Yes SCM Tool changer TR 12: Yes Vertical drilling spindles: 18 Dkob Howhfcgodbn Hol Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction SCM Drilling aggregate F 26 L: Yes Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Workpiece support aids: Yes Three stop ranges: Yes Number of consoles: 8 Self-adjusting machine table: Yes SCM Machine table MATIC: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Special workpiece clamping system: For windows Anzahl Sonderspanner: 4 Barcode reader: Yes Safety device: Bumper, Light barrier Chip conveyor: Yes Interface for .dxf data: Yes Tool charge measurement: Yes Remote control: Yes Control: SCM eye-M PRO Control cabinet cooling: Yes Software: SCM MAESTRO ACTIVE CNC, MICROSOFT WINDOWS 10 Conformity marking: CE mark

Condition: used, Year of construction: 2022, Working dimension X: 3.117 mm Working dimension Y: 2.177 mm Working dimension Z: 150 mm Number of milling spindles: 1 Blow-off device: Yes Main motor power: 14 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 18 SCM Tool changer FAST 18: Yes Tool changing auxiliary device: Yes Vertical drilling spindles: 13 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, 90° turnable SCM Drilling aggregate F 23 LR: Yes SCM : Yes Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Matrix table SCM Machine table HE Multi function table: Yes Multi-zone vacuum: Yes Dynamic vacuum: Yes Anzahl Vakuumzonen: 8 Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Suitable for nesting: Yes Dkeb Hdbewhfcajn Hjl Feeding: Vakuum-Einzugsvorrichtung, Panel storage system Outfeed: discharge unit Safety device: Bumper, Light barrier SCM Pro-Speed: Yes Interface for .dxf data: Yes SCM TecPad: Yes Automatic central lubrication: Yes Tool charge measurement: Yes SCM S-N-D three-position selector switch: Yes Control: SCM eye-M PRO Control cabinet cooling: Yes Software: SCM MAESTRO ACTIVE, SCM MAESTRO CONNECT, SCM MSL, SCM NESTING FREE-FORM, MICROSOFT WINDOWS 10 Conformity marking: CE mark

Condition: used, Year of construction: 2022, Workpiece return: Conveyor belt Edgeband thickness max: 3 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Places in coil magazine: 24 Glue system granulate: Premelting unit SCM Glue system QMS-P Premelter: Yes Quick-change glue pot: Yes SCM Glue system SGP Smart Glue Pot: Yes Suitable for PUR glue: Yes PUR Aufschmelzeinheit: interner PUR-Aufschmelzer SCM Glue system PU BOX L: Yes Spraying device: Yes SCM Spraying device AAP: Yes SCM Spraying device AAR Anti-adhesive spray unit: Yes Spraying device Cleaning agent: Yes Premilling unit: Yes SCM Premilling unit RT-X: Yes SCM Edsystem: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 2 motors SCM Trimming saw YU/SP 1000: Yes Flush/radius/chamfer milling units: 2 SCM Flush milling unit R-E: Yes SCM Edsystem: Yes STEFANI Fine milling unit RSU-E: Yes SCM Multi Edge: Yes SCM Edsystem: Yes Dob Hswhfb Njdbn Hskl Corner rounding unit: 4 motors SCM Corner rounding unit ROUND 4: Yes SCM Multi Edge: Yes Nutfräsaggregat: Universalfräsaggregat schwenkbar, Zwei Aggregate SCM Grooving unit MX 80: Yes Scraper unit: Profile scraper, Flat scraper SCM Scraper unit RC S-E: Yes SCM Multi Edge: Yes SCM Scraper unit RC-E MULTILEAF: Yes Buffing unit: Yes SCM Buffing unit SP F: Yes Finishing aggregate: Hot air Suitable for nesting: Profile scraper, Bündig/Radius/Fasestationen Aggregates actuated by control: NC-axes Profilwechsel automatisch: Bündig/Radius/Fasestationen, Profile scraper, Eckenkopieraggregat Type: left-side machine Infeed automatically: Yes Batch size 1: Yes Barcode reader: Yes SCM Easy Size: Yes Control: SCM eye-M Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Software: SCM MAESTRO ACTIVE EDGE Conformity marking: CE mark

Condition: used, Year of construction: 2020, Workpiece return: Conveyor belt Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feedrate max: 20 m/min Continuously variable feed: Yes Glue system granulate: glue pot above feeding chain Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Dkob Hjwhfb Aodbn Hel Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 6.055 mm Infeed barrier: Yes Control: SCM eye-M Conformity marking: CE mark Weight: 2.820 kg